Szerkesztés

Megosztás a következőn keresztül:


Add-ADPermission

This cmdlet is available only in on-premises Exchange.

Use the Add-ADPermission cmdlet to add permissions to an Active Directory object.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Add-ADPermission
   [-Identity] <ADRawEntryIdParameter>
   -User <SecurityPrincipalIdParameter>
   [-AccessRights <ActiveDirectoryRights[]>]
   [-ChildObjectTypes <ADSchemaObjectIdParameter[]>]
   [-Confirm]
   [-Deny]
   [-DomainController <Fqdn>]
   [-ExtendedRights <ExtendedRightIdParameter[]>]
   [-InheritanceType <ActiveDirectorySecurityInheritance>]
   [-InheritedObjectType <ADSchemaObjectIdParameter>]
   [-Properties <ADSchemaObjectIdParameter[]>]
   [-WhatIf]
   [<CommonParameters>]
Add-ADPermission
   [-Identity] <ADRawEntryIdParameter>
   -Owner <SecurityPrincipalIdParameter>
   [-Confirm]
   [-DomainController <Fqdn>]
   [-WhatIf]
   [<CommonParameters>]
Add-ADPermission
   [[-Identity] <ADRawEntryIdParameter>]
   -Instance <ADAcePresentationObject>
   [-AccessRights <ActiveDirectoryRights[]>]
   [-ChildObjectTypes <ADSchemaObjectIdParameter[]>]
   [-Confirm]
   [-Deny]
   [-DomainController <Fqdn>]
   [-ExtendedRights <ExtendedRightIdParameter[]>]
   [-InheritanceType <ActiveDirectorySecurityInheritance>]
   [-InheritedObjectType <ADSchemaObjectIdParameter>]
   [-Properties <ADSchemaObjectIdParameter[]>]
   [-User <SecurityPrincipalIdParameter>]
   [-WhatIf]
   [<CommonParameters>]

Description

The ADPermission cmdlets can be used to directly modify Active Directory access control lists (ACLs). Although some Microsoft Exchange features may continue to use the ADPermission cmdlets to manage permissions (for example Send and Receive connectors), Exchange 2013 and later versions no longer use customized ACLs to manage administrative permissions. If you want to grant or deny administrative permissions in Exchange 2013 or later, you need to use Role Based Access Control (RBAC). For more information about RBAC, see Permissions in Exchange Server.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Add-ADPermission -Identity "Terry Adams" -User AaronPainter -AccessRights ExtendedRight -ExtendedRights "Send As"

This example grants Send As permissions for Aaron Painter to Terry Adams's mailbox.

Example 2

Add-AdPermission "IP Secured Inbound" -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights ms-Exch-SMTP-Submit,ms-Exch-SMTP-Accept-Any-Recipient,ms-Exch-Bypass-Anti-Spam

This example configures the IP Secured Inbound Receive connector to accept anonymous SMTP messages.

This example assumes that another security mechanism is used to ensure the Receive connector can't be used to send unsolicited commercial email messages. We recommend that you don't allow external clients to send messages anonymously through a Receive connector.

Parameters

-AccessRights

The AccessRights parameter specifies the rights that you want to add for the user on the Active Directory object. Valid values include:

  • AccessSystemSecurity
  • CreateChild
  • DeleteChild
  • ListChildren
  • Self
  • ReadProperty
  • WriteProperty
  • DeleteTree
  • ListObject
  • ExtendedRight
  • Delete
  • ReadControl
  • GenericExecute
  • GenericWrite
  • GenericRead
  • WriteDacl
  • WriteOwner
  • GenericAll
  • Synchronize

You can specify multiple values separated by commas.

You can't use this parameter with the Owner parameter.

Type:ActiveDirectoryRights[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ChildObjectTypes

The ChildObjectTypes parameter specifies what type of object the permission should be applied to.

The ChildObjectTypes parameter can only be used if the AccessRights parameter is set to CreateChild or DeleteChild.

Type:ADSchemaObjectIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Deny

The Deny switch specifies that the permissions you're adding are Deny permissions. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ExtendedRights

The ExtendedRights parameter specifies the extended rights needed to perform the operation.

Type:ExtendedRightIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Identity

The Identity parameter specifies the identity of the object that's getting permissions added. You can specify either the distinguished name (DN) of the object or the object's name if it's unique. If the DN or name contains spaces, enclose the name in quotation marks (").

Type:ADRawEntryIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-InheritanceType

The InheritanceType parameter specifies how permissions are inherited. Valid values are:

  • None
  • All (this is the default value)
  • Children
  • Descendents [sic]
  • SelfAndChildren
Type:ActiveDirectorySecurityInheritance
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-InheritedObjectType

The InheritedObjectType parameter specifies what kind of object inherits this access control entry (ACE).

Type:ADSchemaObjectIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Instance

The Instance parameter enables you to pass an entire object to the command to be processed. It's mainly used in scripts where an entire object must be passed to the command.

Type:ADAcePresentationObject
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Owner

The Owner parameter specifies the owner of the Active Directory object. You can specify the following types of users or groups (security principals) for this parameter:

  • Mailbox users
  • Mail users
  • Security groups

You can use any value that uniquely identifies the user or group. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)

You can't use this parameter with the AccessRights or User parameters.

Type:SecurityPrincipalIdParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Properties

The Properties parameter specifies what properties the object contains.

The Properties parameter can only be used if the AccessRights parameter is set to ReadProperty, WriteProperty or Self.

Type:ADSchemaObjectIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-User

The User parameter specifies who gets the permissions on the Active Directory object. You can specify the following types of users or groups (security principals) for this parameter:

  • Mailbox users
  • Mail users
  • Security groups

For the best results, we recommend using the following values:

  • UPN: For example, user@contoso.com (users only).
  • Domain\SamAccountName: For example, contoso\user.

Otherwise, you can use any value that uniquely identifies the user or group. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)

You can't use this parameter with the Owner parameter.

Type:SecurityPrincipalIdParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.