Szerkesztés

Megosztás a következőn keresztül:

Use the Sqldumper.exe tool to generate a dump file in SQL Server

  • Cikk

This article provides general guidelines for the Sqldumper.exe tool that is included with SQL Server. This tool is used to generate different kinds of dump files.

Original product version:   SQL Server 2019, SQL Server 2017, SQL Server 2016, SQL Server 2014, SQL Server 2012, SQL Server 2008, SQL Server 2005
Original KB number:   917825

Summary

The Sqldumper.exe tool is included with Microsoft SQL Server. It generates memory dump files of SQL Server and related processes for debugging. This article describes how to use Sqldumper.exe to generate a dump file for Watson error reporting or debugging tasks.

The article also describes two other methods to generate dump files:

  • The attached PowerShell script automates SQLDumper.exe command line options.
  • The DBCC STACKDUMP Transact-SQL (T-SQL) command can be used to generate a dump file in SQL Server.

How to run Sqldumper.exe manually

Run the Sqldumper.exe tool under the context of the folder where SQL Server originally installed the tool.

By default, the installation path of Sqldumper.exe is <SQLServerInstall Drive>:\Program Files\Microsoft SQL Server\90\Shared\SQLDumper.exe. Notice that <SQLServerInstall Drive> is a placeholder for the drive on which you installed SQL Server.

To generate a dump file by using the Sqldumper.exe tool, follow these steps:

  1. Open <SQLServerInstall Drive>:\Program Files\Microsoft SQL Server\<number>\Shared folder.

    In this folder path, <number> is a placeholder for one of the following versions:

    • 150 for SQL Server 2019
    • 140 for SQL Server 2017
    • 130 for SQL Server 2016
    • 120 for SQL Server 2014
    • 110 for SQL Server 2012
    • 100 for SQL Server 2008
    • 90 for SQL Server 2005

  2. Make sure that the Dbghelp.dll file is in this folder.

  3. Select Start > Run, type cmd, and then select OK.

  4. At the command prompt, type the following command, and then press Enter:

    cd <SQLServerInstall Drive>:\Program Files\Microsoft SQL Server\<number>\Shared

    Note

    In this folder path, <number> is the same placeholder that changes with the SQL Server version, as described earlier.

  5. To generate a specific kind of dump file, type the corresponding command at the command prompt, and then press Enter:

    • Full dump file:

      Sqldumper.exe <ProcessID> 0 0x01100

    • Mini-dump file:

      Sqldumper.exe <ProcessID> 0 0x0120

    • Mini-dump file that includes indirectly referenced memory (this is the recommended option and is also used by SQL Server by default when it auto-generates memory dump files):

      Sqldumper.exe <ProcessID> 0 0x0128

    • Filtered dump file:

      Sqldumper.exe <ProcessID> 0 0x8100

    Note

    <ProcessID> is a placeholder for the process identifier of the Windows application for which you want to generate a dump file.

If Sqldumper.exe runs successfully, the tool generates a dump file in the folder in which the tool is installed.

The dump file that Sqldumper.exe generates has a file name pattern that resembles SQLDmpr<xxxx>.mdmp.

In this pattern, <xxxx> is an increasing number that is determined based on other files that have a similar file name in the same folder. If there are files in the folder that match the specified pattern, consider comparing their creation dates and times to find the file you want.

How to obtain a Microsoft Windows application process identifier

To generate a dump file by using the Sqldumper.exe tool, you must have the process identifier of the Windows application that you want to generate a dump file for. Here's how to obtain the process identifier:

  1. Press Ctrl+Alt+Delete, and select Task Manager.
  2. In the Windows Task Manager dialog box, select the Processes tab.
  3. On the View menu, select Select Columns.
  4. In the Select Columns dialog box, select the PID (Process Identifier) checkbox, and then select OK.
  5. Note the process identifier of the Windows application that you want to generate a dump file for. For the SQL Server application, note the process identifier of the Sqlservr.exe process.
  6. Close Task Manager.

Alternatively, use the SQL Server error log file to obtain the process identifier of the SQL Server application that's running on your computer. Part of the SQL Server error log file resembles the following example:

2021-09-15 11:50:32.690 Server       Microsoft SQL Server 2019 (RTM-CU12) (KB5004524) - 15.0.4153.1 (X64)
    Jul 19 2021 15:37:34
    Copyright (C) 2019 Microsoft Corporation
    Enterprise Edition (64-bit) on Windows 10 Pro 10.0 <X64> (Build 19043: ) (Hypervisor)
2021-09-15 11:50:32.690 Server       UTC adjustment: -5:00
2021-09-15 11:50:32.690 Server       (c) Microsoft Corporation.
2021-09-15 11:50:32.690 Server       All rights reserved.
2021-09-15 11:50:32.690 Server       Server process ID is 7028.

The number that appears after Server process ID is the process identifier for the Sqlservr.exe process.

Output path for memory dump files

SQLDumper.exe primarily generates memory dump files for the SQL Server process when a memory dump is needed to resolve specific issues, such as exceptions, asserts, or non-yielding schedulers. In such cases, SQL Server invokes the SQLDumper.exe to generate a memory dump file of its process. By default, the memory dump file is stored in the SQL instance MSSQL\LOG\ directory.

How to change the default path

If, for example, the dump file size is too large, you can modify the path by following these steps:

  1. Open SQL Server Configuration Manager.
  2. Under SQL Server Services, locate the SQL Server instance that's under investigation.
  3. Right-click that entry, select Properties, and then go to the Advanced tab.
  4. Change that Dump Directory to the desired path, and then select OK.
  5. Restart SQL Server (when possible) for the new setting to take effect.

When the Sqldumper.exe tool is used manually to generate a dump file for any Windows application, the dump file might be as large as the memory that the Windows application is currently using. Make sure that sufficient disk space is available on the drive to which Sqldumper.exe is writing the dump file.

Specify a custom output folder in command

You can specify the directory where you want the Sqldumper.exe tool to write the dump file. The directory must already exist before you run Sqldumper.exe. Otherwise, Sqldumper.exe fails. Don't use a UNC (Universal Naming Convention) path as a location for the dump file. The following steps provide an example of how to specify the location of the mini-dump file:

  1. Select Start > Run, type cmd, and then select OK.

  2. At the command prompt, type the following command, and then press Enter:

    cd <SQLServerInstall Drive>:\Program Files\Microsoft SQL Server\<number>\Shared

  3. At the command prompt, type the following command, and then press Enter:

    Sqldumper.exe ProcessID 0 0x0128 0 <MdumpPath>

    Note

    <MdumpPath> is a placeholder for the directory where you want the Sqldumper.exe tool to write the dump file. By default, the file is written to the current folder.

If you specify a full dump file or a filtered dump file to be generated, Sqldumper.exe might take several minutes to generate the dump file. The time that's taken depends on the following variables:

  • The amount of memory that Sqlservr.exe is currently using.
  • The write speed of the drive used by the tool to store the dump file.

During this time, the Sqldumper.exe tool doesn't process commands. You will notice that the server stops responding. Additionally, a cluster failover might occur.

Permission requirements

To run Sqldumper.exe, you must sign in to Windows by using one of the following methods:

  • Use an account that's a member of the administrator's group on the computer.
  • Use the same user account under which the SQL Server service is running.

For the Sqldumper.exe tool to work successfully through Remote Desktop or through Terminal Services, you must start Remote Desktop or Terminal Services in the console mode. For example, to start Remote Desktop in the console mode, select Start > Run, type mstsc /console, and then select OK. If the target server runs Windows 2000, the /console option is silently ignored. You can connect to the server through Remote Desktop, but you won't be using the console session.

If you find that no dump file has been generated in the current folder after running Sqldumper.exe, check the command line output generated by the tool to identify the potential cause of the failure. This information is also logged in the Sqldumper_errorlog.log file in current directory. The following are two possible error messages and their causes:

Message Cause
"OpenProcess failed 0x57 - The parameter is incorrect" An invalid Process ID was passed to the Sqldumper.exe utility.
"Invalid value for thread id - <invalid parameter> Parameter error" An invalid parameter was passed to the Sqldumper.exe utility.

If an error message that resembles one of the following is generated, you can safely ignore this message:

  • "Unknown callback type during minidump 6"
  • "Unknown callback type during minidump 7"

Impact of dump generation

When a dump file of a user-mode process is requested (as discussed in this article, as opposed to Operating System Kernel Dumps, which are outside our scope), the target Process (here SQLServer.exe) is frozen for the duration it takes to serialize the dump content to its file target.

Frozen means that the process won't be able to run any user request or any internal operation, including any Resource Polling mechanism such as the implementation of Windows Clustering's IsAlive and Looks Alive (see the Memory dumps on cluster failovers section for details about how to handle that situation). Any time-out that relies on wall clock time might also be breached because of the freeze.

Based on the previous statement, the duration of the freeze is the critical factor here, driven by the following:

  • The type of dump selected.
  • The size of SQL Server process in memory, which in the case of a single active instance running default parameters is often close to the total physical RAM of the server.
  • The performance of the disk used as a target for the dump.

Furthermore, the size of the dump file on disk should be planned for, especially if multiple dumps are a possibility and if large, non-default dump types are selected. Make sure you review the Dump types to know what to expect. By default, some dump methods create the dump in SQL Server Instance's \Log folder, which, in default simple configuration would also be system disk and data+log disk for SQL Server. Bringing that disk to saturation has severe impact on SQL Server and/or system availability.

Manage the impact on clustered systems

The process is suspended temporarily during the dump generation. This might affect the SQL Server service availability and trigger resources failover in Always On contexts (both Failover cluster instance and Availability group). The dump generation of different processes impacts resources differently. Read the Impact of dump generation and Dump types sections carefully.

When you capture a SQL Server dump on a failover clustered instance or an availability group (AG) instance of SQL Server, the clustered SQL Server or AG might fail over to another node if the dump takes too long to complete. This might be especially problematic on systems that use large amounts of RAM or if you're generating a filtered or a full memory dump. To prevent failover, use the following settings before capturing the dump file. The change can be reverted after a dump file is taken:

  • For failover clustered instance (FCI):
    • Right-click SQL Server resource in Cluster Administrator, select If resource fails, do not restart on the Policies tab.
    • On the Properties tab, increase the HealthCheck Timeout. For example, set the property value to 180 seconds or higher. If this timeout is reached, the policy If resource fails, do not restart is ignored, and the resource is restarted.
    • On the Properties tab, change the FailureConditionLevel value to zero.
  • For AG, apply all the following settings:
    • Increase session-timeout, for example, 120 seconds for all replicas. In SQL Server Management Studio (SSMS), right-click the replica to be configured, and then select Properties. Change the Session timeout (seconds) field to 120 seconds. For more information, see Change the Session-Timeout Period for an Availability Replica (SQL Server).
    • Change the auto failover of all replicas to manual failover. In SSMS, right-click replica, select Properties, and change the auto failover of all replicas to manual failover on the Properties tab. For more information, see Change the Failover Mode of an Availability Replica (SQL Server).
    • Increase the LeaseTimeout to 60,000 ms (60 seconds) and change HealthCheckTimeout to 90,000 ms (90 seconds). In Cluster Administrator, right-click AG resource, select Properties, and then switch to the Properties tab to modify both settings. For more information, see Configure HealthCheckTimeout Property Settings.

Product improvements to reduce the impact on SQL Server

Four major improvements are added to recent versions of SQL Server to reduce the size of the dump file and/or time for generating the memory dump:

Bitmap filtering mechanism

SQL Server allocates a bitmap that keeps track of memory pages to be excluded from a filtered dump. Sqldumper.exe reads the bitmap and filters out pages without the need to read any other memory manager metadata. You see the following messages in the SQL Server error log when the bitmap is enabled or disabled respectively:

Page exclusion bitmap is enabled. and Page exclusion bitmap is disabled.

  • SQL Server 2016

    Starting with SQL Server 2016 SP2 CU13 the bitmap filtering is enabled by default.

  • SQL Server 2017

    • This isn't available in RTM through CU15.
    • In SQL Server 2017 CU16, you can enable the bitmap filtering via T8089 and disable it by turning off T8089.
    • Starting with SQL Server 2017 CU20 the bitmap filtering is enabled by default. Trace flag T8089 will no longer apply and will be ignored if turned on. The bitmap filtering can be disabled via T8095.

  • SQL Server 2019

    This is enabled by default in SQL Server 2019 RTM. It can be disabled via T8095.

Elimination of repeated dumps on the same issue

Repeated memory dumps on the same problem are eliminated. Using a stack signature, the SQL engine keeps track if an exception has already occurred and won't produce a new memory dump if there's one already. This applies to access violations, stack overflow, asserts, and index corruption exceptions. This significantly reduces the amount of disk space used by memory dumps and doesn't freeze the process temporarily to generate a dump. This was added in SQL Server 2019.

Shortened output in the error log

The content generated in the SQL Server error log from a single memory dump can not only be overwhelming, but it can also slow down the process of generating a memory dump due to the time required for serializing all this information into a text format in the error log. In SQL Server 2019, the content stored in the Error log upon dump generation has been greatly reduced and it may look like this:

DateTimespidS pid    **Dump thread - spid = 0, EC = 0x0000015C7169BF40
DateTimespidS pid    *
DateTimespidS pid    *User initiated stack dump. This is not a server exception dump.
DateTimespidS pid    *
DateTimespidS pid    Stack Signature for the dump is 0x00000000788399E5
DateTimespidS pid    External dump process return code 0x20000001.
External dump process returned no errors.

Previously SQL Server would print information for each session or thread when a manual dump was triggered by the user for example.

Parallel compression of memory dumps

To generate dumps faster and make them smaller in size, a compressed memory dump feature was introduced in SQL Server 2022 CU8 and SQL Server 2019 CU23. When activated, Sqldumper.exe creates multiple threads to read a process's memory simultaneously, compresses it, and then saves it to the dump file. This multi-thread, parallel compression reduces file size and speeds up the dumping process when used with full and filtered dumps.

You can turn on trace flag 2610 to enable compressed memory dump:

DBCC TRACEON (2610,-1)
GO
DBCC STACKDUMP with FILTERED_DUMP
GO
DBCC TRACEOFF (2610,-1)

Alternatively, you can add -T2610 as a startup parameter to your SQL Server instance so it always creates compressed memory dumps.

If you manually run Sqldumper.exe, you can use the -zdmp parameter to capture a compressed memory dump. For example:

Sqldumper.exe <ProcessID> 0 0x8100 0 d:\temp -zdmp

You can also limit how many cores Sqldumper.exe can use to create the compressed dump by using the -cpu:X parameter, where X is the number of CPUs. This parameter is only available when you manually run Sqldumper.exe from the command line:

Sqldumper.exe <ProcessID> 0 0x8100 0 d:\temp -zdmp -cpu:8

Factors that prevent or delay creation of memory dumps

The following factors are known to cause delays or prevent the creation of memory dumps.

  • The IO path where memory dumps are written performs poorly. In such cases, to investigate and resolve disk I/O performance is the next logical step.
  • An anti-virus or other monitoring software is interfering with SQLDumper.exe. In some cases, third party software detour ReadProcessMemory function. This can dramatically increase the dump duration. To resolve most of these issues, disable the interfering software or add SQLDumper.exe to an exclusion list.

Dump types

The following methods can be used to generate three different types of dumps: mini dumps, full dumps, and filtered dumps.

Mini dumps with referenced memory

This type of memory dump is a snapshot of all active threads of the process ("thread stacks"), along with a limited extract of the memory referenced by the thread stacks and some other key process or thread data. They're typically a few megabytes in size, and are fast to generate (from less than a second to a couple of seconds). Even larger server systems (with hundreds of CPU indirectly driving massive number of threads in SQL Server process) will rarely exceed 20-30 MB: the size of a mini dump doesn't grow with the size of SQL Server process. This dump type is the default type used by SQL Server when generating memory dumps automatically on exceptions, scheduler issues, latch issues, database corruption, and asserts.

Note

SQL Server, as part of its built-in instrumentation, will generate automated "diagnostic mini dumps" in some specific situations. This operation is therefore considered safe enough that SQL Server can trigger it automatically when needed.

Full dumps

A Full memory dump is a complete copy of the active target process space. That would therefore include all thread state, all process allocated memory, and all loaded modules. Full dumps will therefore have a size, which is roughly the same of SQL Server process, which in turn may be almost as large as total system RAM. On large servers dedicated to a single SQL Server instance that might mean a file, which is several hundreds of gigabytes or more. Needlessly to say, such a file will take a long time to generate and will therefore induce prolonged freeze. Disk performance for the file target of the dump will significantly influence the freezing time. This type of dump is rarely used for SQL Server nowadays, as described in the following explanation.

Filtered dumps

As the RAM size of typical servers running SQL Server steadily increases, full dumps become more unwieldy. Filtered dumps are therefore implemented. A filtered dump is a subset of a full dump, where large areas of SQL Server memory are excluded on the fly and not written to disk. Typically the excluded memory brings no added value to troubleshooting. Examples are data/index pages and some internal caches like Hekaton data pages and Log Pool memory. This filtered dump results in a smaller file than a full dump does, but the dump still retains almost all its usefulness. Filtered dumps have replaced full dumps as the preferred option in a vast majority of situations where mini dumps are not sufficient. The decrease in size can vary compared to a full dump, but it's still a rather large file, which is often 30-60 percent of SQL Server process size. Therefore, it's best to plan for a possible size as large as a full dump as a worst option, which leaves a good safety margin. A filtered dump might not be necessarily faster to generate than a full dump in every case: it's a matter of whether the gains related to the number of avoided IO exceed the time required to implement the filter logic (disk speed and CPU/RAM speed will influence that).

You can use the following query to get a rough estimate of the filtered dump size. Though the expectation is that most data or index pages are excluded from the dump, the ones that are exclusively latched and being modified won't be omitted.

SELECT SUM(pages_kb)
FROM sys.dm_os_memory_clerks
WHERE type != 'MEMORYCLERK_SQLBUFFERPOOL'

Since you can use Sqldumper.exe to generate a dump file on demand for any Microsoft Windows application, you might consider using the filtered dump option. However, a filtered dump file is only applicable and meaningful in the context of SQL Server. You can still generate a mini-dump, a full dump file, or non-SQL Server applications successfully.

The SQL Server process calls the Sqldumper.exe tool internally to generate a dump file when the process experiences any exceptions. SQL Server passes parameters to Sqldumper.exe. You can use trace flags to change the parameters that SQL Server passes to the tool by default when an exception or assertion occurs. These trace flags are in the range from 2540 to 2559. You can use one of these trace flags to change the default dump type SQLDumper.exe generate (the default is a mini-dump with referenced memory). For example:

  • Trace Flag 2551: Produces a filtered memory dump.
  • Trace Flag 2544: Produces a full memory dump.
  • Trace Flag 8026: SQL Server will clear a dump trigger after generating the dump once.

If two or more trace flags are active, the option indicating the largest memory dump is honored. For example, if trace flags 2551 and 2544 are used, SQL Server creates a full memory dump.

Generate a memory dump on cluster failovers

In cluster failover scenarios, the SQL Server resource DLL can obtain a dump file before the failover occurs to assist with troubleshooting. When the SQL Server resource DLL determines that a SQL Server resource has failed, the SQL Server resource DLL uses the Sqldumper.exe utility to obtain a dump file of the SQL Server process. To make sure that the Sqldumper.exe tool successfully generates the dump file, you must set the following three properties as prerequisites:

  • SqlDumperDumpTimeOut

    A user-specified time-out. The resource DLL waits for the dump file to be completed before the resource DLL stops the SQL Server service.

  • SqlDumperDumpPath

    The location where the Sqldumper.exe tool generates the dump file.

  • SqlDumperDumpFlags

    Flags that Sqldumper.exe uses.

If any one of the properties isn't set, Sqldumper.exe can't generate the dump file. A warning message is logged both in the event log and in the cluster log whenever the resource is brought online.

Cluster configuration for SQLDumper on SQL Server 2012 and later versions

You can use the ALTER SERVER CONFIGURATION (T-SQL) command to modify these properties. For example:

ALTER SERVER CONFIGURATION SET FAILOVER CLUSTER PROPERTY SqlDumperDumpTimeOut = 0;
ALTER SERVER CONFIGURATION SET FAILOVER CLUSTER PROPERTY SqlDumperDumpPath = 'C:\temp\';
ALTER SERVER CONFIGURATION SET FAILOVER CLUSTER PROPERTY SqlDumperDumpFlags = 296;

Alternatively, you can use PowerShell scripts. For example, for a named instance SQL2017AG:

Get-ClusterResource -Name "SQL Server (SQL2017AG)" | Set-ClusterParameter -Name "SqlDumperDumpPath" -Value "C:\temp"
Get-ClusterResource -Name "SQL Server (SQL2017AG)" | Set-ClusterParameter -Name "SqlDumperDumpFlags" -Value 296
Get-ClusterResource -Name "SQL Server (SQL2017AG)" | Set-ClusterParameter -Name "SqlDumperDumpTimeOut" -Value 0

To check if the settings are applied, you can run the following PowerShell command:

Get-ClusterResource -Name "SQL Server (SQL2017AG)" | Get-ClusterParameter

Cluster configuration for SQLDumper on SQL Server 2008/2008 R2 or Windows 2012 and earlier versions

To set the Sqldumper.exe utility properties for cluster failover by using the cluster resource command, follow these steps:

  1. Select Start > Run, type cmd, and then select OK.
  2. For each property, type the corresponding command at the command prompt, and then press Enter:

    • The SqlDumperDumpFlags property

      To set the SqlDumperDumpFlags property for a specific dump file, type the corresponding command at the command prompt, and then press Enter:

      • All thread full dump file

        • Default instance

          cluster resource "SQL Server" /priv SqlDumperDumpFlags = 0x01100

        • Named instance

          cluster resource "SQL Server (INSTANCE1)" /priv SqlDumperDumpFlags = 0x01100

      • All thread mini-dump file

        • Default instance

          cluster resource "SQL Server" /priv SqlDumperDumpFlags = 0x0120

        • Named instance

          cluster resource "SQL Server (INSTANCE1)" /priv SqlDumperDumpFlags = 0x0120

      • Filtered all thread dump file

        • Default instance

          cluster resource "SQL Server" /priv SqlDumperDumpFlags = 0x8100

        • Named instance

          cluster resource "SQL Server  (INSTANCE1)" /priv SqlDumperDumpFlags = 0x8100

    • The SqlDumperDumpPath property

      cluster resource "SQL Server" /priv SqlDumperDumpPath = <DirectoryPath>

      Note

      <DirectoryPath> is a placeholder for the directory in which the dump file will be generated, and it should be specified within quotation marks (" ").

    • The SqlDumperDumpTimeOut property

      cluster resource "SQL Server" /priv SqlDumperDumpTimeOut = <Timeout>

      Note

      <Timeout> is a placeholder for the time-out in milliseconds (ms).

The time that the tool takes to generate a dump file of a SQL Server process depends on the computer configuration. For a computer with a large amount of memory, the time could be significant. To estimate the time required for the process, use the Sqldumper.exe tool to manually generate a dump file. The valid values for the SqlDumperDumpTimeOut property are from 10,000 ms to MAXDWORD.MAXDWORD represents the highest value in the range of the DWORD data type (4294967295).

To verify that the settings are enabled, you can run the following command:

cluster resource "SQL Server" /priv

Remove Sqldumper.exe properties for cluster failover

To remove the Sqldumper.exe tool properties for cluster failover, follow these steps:

  1. Select Start > Run, type cmd, and then select OK.

  2. For a specific property, type the corresponding command at the command prompt, and then press Enter:

    • The SqlDumperDumpFlags property

      • Default instance

          cluster resource "SQL Server" /priv:SqlDumperDumpFlags /usedefault

      • Named instance

          cluster resource "SQL Server (INSTANCE1)" /priv:SqlDumperDumpFlags /usedefault

    • The SqlDumperDumpPath property

      • Default instance

        cluster resource "SQL Server" /priv:SqlDumperDumpPath /usedefault

      • Named instance

        cluster resource "SQL Server (INSTANCE1)" /priv:SqlDumperDumpPath /usedefault

    • The SqlDumperDumpTimeOut property

      • Default instance

        cluster resource "SQL Server" /priv:SqlDumperDumpTimeOut /usedefault

      • Named instance

        cluster resource "SQL Server (INSTANCE1)" /priv:SqlDumperDumpTimeOut /usedefault

How to use DBCC STACKDUMP

The DBCC STACKDUMP command can help you create a memory dump in the LOG directory of your SQL Server instance installation. The command will by default create a minidump with all threads, which has limited size and is adequate to reflect the state of SQL Server process. Run the following command in a SQL Server client:

DBCC STACKDUMP

For extended functionality of DBCC STACKDUMP in SQL Server 2019, see Extended DBCC STACKDUMP functionality introduced in SQL Server 2019.

To enable this method to create a filtered dump, turn on trace flags 2551 by using the following command:

DBCC TRACEON(2551, -1)
GO
DBCC STACKDUMP

To create a full dump, use the trace flag 2544.

After you get the dump file, you should disable the trace flag by using the command DBCC TRACEOFF (<TraceNumber>, -1); to avoid inadvertently upgrading all further SQL Server self-diagnostic minidumps to larger dumps. In the command, <TraceNumber> is the trace flag you have previously enabled like 2551 or 2544. For example:

DBCC TRACEOFF(2551, -1)

In case you're unsure of which trace flag remains active, run the following command:

DBCC TRACESTATUS(-1)

An empty result set indicates that no trace flag is active. Conversely, if 2551 is still active, you would see:

TraceFlag Status Global Session
2551 1 1 0

Note

The traceflag enabled by DBCC TRACEON are reset (removed) after a service restart.

Extended DBCC STACKDUMP functionality introduced in SQL Server 2019

Starting with SQL Server 2019 CU2, the DBCC STACKDUMP command was extended to support generating dumps of different types: mini, filtered, and full dumps. This command eliminates the need for using trace flags. It also allows you to limit the text output in the other text file that gets generated with the memory dump. Doing so might provide visible performance gain in the time it takes SQLDumper.exe to generate a memory dump.

DBCC STACKDUMP WITH MINI_DUMP | FILTERED_DUMP | FULL_DUMP [, TEXT_DUMP = LIMITED | DETAILED]

The TEXT_DUMP = LIMITED is the default option. If you would like to receive detailed output in the SQLDump000X.txt file, you can use TEXT_DUMP = DETAILED.

To generate a filtered dump with limited output in the .txt file, run the following command:

DBCC STACKDUMP WITH FILTERED_DUMP , TEXT_DUMP = LIMITED

How to use a PowerShell script to generate a dump file with SQLDumper

  • Save the following code as a PS1 file, for example SQLDumpHelper.ps1:

    Code details

    $isInt = $false
$isIntValDcnt = $false
$isIntValDelay = $false
$SqlPidInt = 0
$NumFoler = ""
$OneThruFour = ""
$SqlDumpTypeSelection = ""
$SSASDumpTypeSelection = ""
$SSISDumpTypeSelection = ""
$SQLNumfolder = 0
$SQLDumperDir = ""
$OutputFolder = ""
$DumpType = "0x0120"
$ValidPid
$SharedFolderFound = $false
$YesNo = ""
$ProductNumber = ""
$ProductStr = ""

Write-Host ""
Write-Host "`******************************************************************"
Write-Host "This script helps you generate one or more SQL Server memory dumps"
Write-Host "It presents you with choices on:`
            -target SQL Server process (if more than one)
            -type of memory dump
            -count and time interval (if multiple memory dumps)
You can interrupt this script using CTRL+C"
Write-Host "***********************************************************************"

# check for administrator rights
# debugging tools like SQLDumper.exe require Admin privileges to generate a memory dump

if (-not ([Security.Principal.WindowsPrincipal] [Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole]::Administrator))
{
    Write-Warning "Administrator rights are required to generate a memory dump!`nPlease re-run this script as an Administrator!"
    return
}

# what product would you like to generate a memory dump
while ($true)
{
    Write-Host "Which product would you like to generate a memory dump of?" -ForegroundColor Yellow
    Write-Host "1) SQL Server"
    Write-Host "2) SSAS (Analysis Services)"
    Write-Host "3) SSIS (Integration Services)"
    Write-Host "4) SSRS (Reporting Services)"
    Write-Host "5) SQL Server Agent"
    Write-Host ""
    $ProductNumber = Read-Host "Enter 1-5>"

    if ($ProductNumber -in 1,2,3,4,5)
    {
        break
    }
    Write-Host "`nPlease enter a valid number from list above!`n"
    Start-Sleep -Milliseconds 300
}

if ($ProductNumber -eq "1")
{
    $SqlTaskList = Tasklist /SVC /FI "imagename eq sqlservr*" /FO CSV | ConvertFrom-Csv
    $ProductStr = "SQL Server"
}
elseif ($ProductNumber -eq "2")
{
    $SqlTaskList = Tasklist /SVC /FI "imagename eq msmdsrv*" /FO CSV | ConvertFrom-Csv
    $ProductStr = "SSAS (Analysis Services)"
}
elseif ($ProductNumber -eq "3")
{
    $SqlTaskList = Tasklist /SVC /FI "imagename eq msdtssrvr*" /FO CSV | ConvertFrom-Csv
    $ProductStr = "SSIS (Integration Services)"
}
elseif ($ProductNumber -eq "4")
{
    $SqlTaskList = Tasklist /SVC /FI "imagename eq reportingservicesservice*" /FO CSV | ConvertFrom-Csv
    $ProductStr = "SSRS (Reporting Services)"
}
elseif ($ProductNumber -eq "5")
{
    $SqlTaskList = Tasklist /SVC /FI "imagename eq sqlagent*" /FO CSV | ConvertFrom-Csv
    $ProductStr = "SQL Server Agent"
}

if ($SqlTaskList.Count -eq 0)
{
    Write-Host "There are currently no running instances of $ProductStr. Exiting..." -ForegroundColor Green
    break
}

# if multiple SQL Server instances, get the user to input PID for desired SQL Server
if ($SqlTaskList.Count -gt 1)
{
    Write-Host "More than one $ProductStr instance found."

    $SqlTaskList | Select-Object PID, "Image name", Services | Out-Host

    # check input and make sure it is a valid integer
    while ($true)
    {
        Write-Host "Please enter the PID for the desired SQL service from list above" -ForegroundColor Yellow
        $SqlPidStr = Read-Host ">"

        if( $SqlPidStr -in $SqlTaskList.PID)
        {
            $SqlPidInt = [int]$SqlPidStr
            break
        }
    }

    Write-Host "Using PID=$SqlPidInt for generating a $ProductStr memory dump" -ForegroundColor Green
    Write-Host ""

}
else # if only one SQL Server/SSAS on the box, go here
{
    $SqlTaskList | Select-Object PID, "Image name", Services | Out-Host
    $SqlPidInt = [convert]::ToInt32($SqlTaskList.PID)

    Write-Host "Using PID=", $SqlPidInt, " for generating a $ProductStr memory dump" -ForegroundColor Green
    Write-Host ""
}

# dump type

if ($ProductNumber -eq "1")  # SQL Server memory dump
{
    # ask what type of SQL Server memory dump
    while($true)
    {
        Write-Host "Which type of memory dump would you like to generate?" -ForegroundColor Yellow
        Write-Host "1) Mini-dump"
        Write-Host "2) Mini-dump with referenced memory " -NoNewLine; Write-Host "(Recommended)"
        Write-Host "3) Filtered dump " -NoNewline; Write-Host "(Not Recommended)" -ForegroundColor Red
        Write-Host "4) Full dump  " -NoNewline; Write-Host "(Do Not Use on Production systems!)" -ForegroundColor Red
        Write-Host ""
        $SqlDumpTypeSelection = Read-Host "Enter 1-4>"

        if ($SqlDumpTypeSelection -in 1,2,3,4)
        {
            break
        }
        Write-Host "`nPlease enter a valid type of memory dump!`n"
        Start-Sleep -Milliseconds 300
    }

    Write-Host ""

    switch ($SqlDumpTypeSelection)
    {
        "1" { $DumpType="0x0120"; break }
        "2" { $DumpType="0x0128"; break }
        "3" { $DumpType="0x8100"; break }
        "4" { $DumpType="0x01100"; break }
        default { "0x0120"; break }
    }
}
elseif ($ProductNumber -eq "2")  # SSAS dump
{
    # ask what type of SSAS memory dump
    while($true)
    {
        Write-Host "Which type of memory dump would you like to generate?" -ForegroundColor Yellow
        Write-Host "1) Mini-dump"
        Write-Host "2) Full dump  " -NoNewline; Write-Host "(Do Not Use on Production systems!)" -ForegroundColor Red
        Write-Host ""
        $SSASDumpTypeSelection = Read-Host "Enter 1-2>"

        if ($SSASDumpTypeSelection -in 1,2)
        {
            break
        }
        Write-Host "`nPlease enter a valid type of memory dump!`n"
        Start-Sleep -Milliseconds 300
    }

    Write-Host ""

    switch ($SSASDumpTypeSelection)
    {
        "1" {$DumpType="0x0";break}
        "2" {$DumpType="0x34";break}
        default {"0x0120"; break}
    }
}
elseif ($ProductNumber -in 3,4,5)  # SSIS/SSRS/SQL Agent dump
{
    # ask what type of SSIS memory dump
    while($true)
    {
        Write-Host "Which type of memory dump would you like to generate?" -ForegroundColor Yellow
        Write-Host "1) Mini-dump"
        Write-Host "2) Full dump"
        Write-Host ""
        $SSISDumpTypeSelection = Read-Host "Enter 1-2>"

        if ($SSISDumpTypeSelection -in 1,2)
        {
            break
        }
        Write-Host "`nPlease enter a valid type of memory dump!`n"
        Start-Sleep -Milliseconds 300
    }

    Write-Host ""

    switch ($SSISDumpTypeSelection)
    {
        "1" { $DumpType="0x0"; break }
        "2" { $DumpType="0x34"; break }
        default { "0x0120"; break }
    }
}

# Sqldumper.exe PID 0 0x0128 0 c:\temp
# output folder
while($OutputFolder -eq "" -or !(Test-Path -Path $OutputFolder))
{
    Write-Host ""
    Write-Host "Where would your like the memory dump stored (output folder)?" -ForegroundColor Yellow
    $OutputFolder = Read-Host "Enter an output folder with no quotes (e.g. C:\MyTempFolder or C:\My Folder)"
    if ($OutputFolder -eq "" -or !(Test-Path -Path $OutputFolder))
    {
        Write-Host "'" $OutputFolder "' is not a valid folder. Please, enter a valid folder location" -ForegroundColor Yellow
    }
}

# strip the last character of the Output folder if it is a backslash "\". Else Sqldumper.exe will fail
if ($OutputFolder.Substring($OutputFolder.Length-1) -eq "\")
{
    $OutputFolder = $OutputFolder.Substring(0, $OutputFolder.Length-1)
    Write-Host "Stripped the last '\' from output folder name. Now folder name is  $OutputFolder"
}

# find the highest version of SQLDumper.exe on the machine
$NumFolder = dir "C:\Program Files\Microsoft SQL Server\1*" | Select-Object @{name = "DirNameInt"; expression={[int]($_.Name)}}, Name, Mode | Where-Object Mode -Match "da*" | Sort-Object DirNameInt -Descending

for( $j=0; $j -lt $NumFolder.Count; $j++)
{
    $SQLNumfolder = $NumFolder.DirNameInt[$j]   # start with the highest value from sorted folder names - latest version of dumper
    $SQLDumperDir = "C:\Program Files\Microsoft SQL Server\" + $SQLNumfolder.ToString() + "\Shared\"
    $TestPathDumperDir = $SQLDumperDir + "sqldumper.exe"

    if (Test-Path -Path $SQLDumperDir)
    {
        break
    }
}

# build the SQLDumper.exe command e.g. (Sqldumper.exe 1096 0 0x0128 0 c:\temp\)

$cmd = "$([char]34)"+$SQLDumperDir + "sqldumper.exe$([char]34)"
$arglist = $SqlPidInt.ToString() + " 0 " +$DumpType +" 0 $([char]34)" + $OutputFolder + "$([char]34)"
Write-Host "Command for dump generation: ", $cmd, $arglist -ForegroundColor Green

# do-we-want-multiple-dumps section
Write-Host ""
Write-Host "This utility can generate multiple memory dumps, at a certain interval"
Write-Host "Would you like to collect multiple memory dumps (2 or more)?" -ForegroundColor Yellow

# validate Y/N input
while ($true)
{
    $YesNo = Read-Host "Enter Y or N>"

    if ($YesNo -in "y","n")
    {
        break
    }
    Write-Host "Not a valid 'Y' or 'N' response"
}

# get input on how many dumps and at what interval
if ($YesNo -eq "y")
{
    [int]$DumpCountInt=0
    while (1 -ge $DumpCountInt)
    {
        Write-Host "How many dumps would you like to generate for this $ProductStr ?" -ForegroundColor Yellow
        $DumpCountStr = Read-Host ">"

        if ([int]::TryParse($DumpCountStr, [ref]$DumpCountInt) -and $DumpCountInt -gt 1)
        {
            break
        }
        Write-Host "Please enter a number greater than one." -ForegroundColor Red
    }

    [int]$DelayIntervalInt=0
    while ($true)
    {
        Write-Host "How frequently (in seconds) would you like to generate the memory dumps?" -ForegroundColor Yellow
        $DelayIntervalStr = Read-Host ">"

        if ([int]::TryParse($DelayIntervalStr, [ref]$DelayIntervalInt) -and $DelayIntervalInt -gt 0)
        {
            break
        }
        Write-Host "Please enter a number greater than zero." -ForegroundColor Red
    }

    Write-Host "Generating $DumpCountInt memory dumps at a $DelayIntervalStr-second interval" -ForegroundColor Green

    # loop to generate multiple dumps
    $cntr = 0
    while ($true)
    {
        Start-Process -FilePath $cmd -Wait -Verb runAs -ArgumentList $arglist
        $cntr++

        Write-Host "Generated $cntr memory dump(s)." -ForegroundColor Green

        if ($cntr -ge $DumpCountInt)
        {
            break
        }
        Start-Sleep -S $DelayIntervalInt
    }

    # print what files exist in the output folder
    Write-Host ""
    Write-Host "Here are all the memory dumps in the output folder '$OutputFolder'" -ForegroundColor Green
    $MemoryDumps = $OutputFolder + "\SQLDmpr*"
    Get-ChildItem -Path $MemoryDumps

    Write-Host ""
    Write-Host "Process complete"
}
else # produce just a single dump
{
    Start-Process -FilePath $cmd -Wait -Verb runAs -ArgumentList $arglist

    # print what files exist in the output folder
    Write-Host ""
    Write-Host "Here are all the memory dumps in the output folder '$OutputFolder'" -ForegroundColor Green
    $MemoryDumps = $OutputFolder + "\SQLDmpr*"
    Get-ChildItem -Path $MemoryDumps

    Write-Host ""
    Write-Host "Process complete"
}

Write-Host "For errors and completion status, review SQLDUMPER_ERRORLOG.log created by SQLDumper.exe in the output folder '$OutputFolder'.`nOr if SQLDumper.exe failed, look in the folder from which you are running this script."

  • Run it from Command Prompt as administrator by using the following command:

    Powershell.exe -File SQLDumpHelper.ps1

  • Or run it from Windows PowerShell console and run as administrator by using the following command:

    .\SQLDumpHelper.ps1

Note

If you have never run PowerShell scripts on your system, you might receive the following error message:

"File ...SQLDumpHelper.ps1 cannot be loaded because running scripts is disabled on this system."

To enable the ability to run the commands, follow these steps:

  1. Start Windows PowerShell console by using the Run as Administrator option. Only members of the administrators group on the computer can change the execution policy.

  2. Enable running unsigned scripts by the following command:

    Set-ExecutionPolicy RemoteSigned

    Note

    This will enable you to run unsigned scripts that you create on your local computer and signed scripts from the internet.