Szerkesztés

Megosztás a következőn keresztül:

WiFiCx WPA3-SAE authentication

  • Cikk

WiFiCx supports WPA3-SAE, also known as WPA3-Personal. Frame content generation and parsing for SAE (Secure Authentication of Equals) authentication is done within Windows, but the OS requires driver support for sending and receiving WPA3-SAE authentication frames.

WPA3-SAE capabilities

WiFiCx drivers indicate SAE support by doing the following:

  1. Set SAE supported capability.
    The driver sets the SAEAuthenticationSupported capability in WIFI_DEVICE_CAPABILITIES during the call to WifiDeviceSetDeviceCapabilities.

  2. Set MFP capability.
    The driver sets the MFPCapable capability in WIFI_STATION_CAPABILITIES during the call to WifiDeviceSetStationCapabilities.

  3. Add the WDI_AUTH_ALGO_WPA3_SAE cipher.
    The driver includes the WDI_AUTH_ALGO_WPA3_SAE + DOT11_CIPHER_ALGO_CCMP pair in the list of auth-cipher combinations returned in the call to WifiDeviceSetStationCapabilities. This should be added in the following structure:

    The driver also includes the WDI_AUTH_ALGO_WPA3_SAE + WDI_CIPHER_ALGO_BI pair in the list of auth-cipher combinations returned in the call to WifiDeviceSetStationCapabilities. It should be added in the following struct:

WPA3-SAE authentication flow

Connection initiation

SAE connections are initiated with OID_WDI_TASK_CONNECT or OID_WDI_TASK_ROAM. WDI specifies WDI_AUTH_ALGO_WPA3_SAE as the auth method when the driver is required to do SAE authentication. If WDI provides the PMKID in the BSS list in the Connect/Roam task, then the driver skips SAE authentication and performs Open Authentication instead, followed by a reassociation request with the PMKID.

Authentication flow

Diagram that shows the WPA3-SAE authentication flow.

Initial request for SAE parameters

The driver first selects a BSS to which to connect or roam and, if WDI did not provide the PMKID for that BSS, the driver requests Commit parameters from WDI with NDIS_STATUS_WDI_INDICATION_SAE_AUTH_PARAMS_NEEDED. In this initial indication, the driver sets the indication type to WDI_SAE_INDICATION_TYPE_COMMIT_REQUEST_PARAMS_NEEDED. In response, WDI sends OID_WDI_SET_SAE_AUTH_PARAMS to the driver with one of the following options.

  • Send Commit request (WDI_SAE_REQUEST_TYPE_COMMIT_PARAMS)
  • Fail SAE authentication (WDI_SAE_REQUEST_TYPE_FAILURE)

Upon receiving a Commit response

On receiving a Commit response, the driver sends NDIS_STATUS_WDI_INDICATION_SAE_AUTH_PARAMS_NEEDED with the type set to WDI_SAE_INDICATION_TYPE_COMMIT_FRAME. In response, WDI sends OID_WDI_SET_SAE_AUTH_PARAMS with one of the following requests:

  • Send Commit request (WDI_SAE_REQUEST_TYPE_COMMIT_PARAMS)
  • Send Confirm request (WDI_SAE_REQUEST_TYPE_CONFIRM_PARAMS)
  • Fail SAE authentication (WDI_SAE_REQUEST_TYPE_FAILURE)

Upon receiving a Confirm response

On receiving a Confirm response, the driver sends NDIS_STATUS_WDI_INDICATION_SAE_AUTH_PARAMS_NEEDED with the type set to WDI_SAE_INDICATION_TYPE_CONFIRM_FRAME. WDI then sends OID_WDI_SET_SAE_AUTH_PARAMS with the SAE status field set to success or failure. If SAE authentication fails in the driver due to timeouts or other reasons, the driver sends an NDIS_STATUS_WDI_INDICATION_SAE_AUTH_PARAMS_NEEDED indication with the type set to WDI_SAE_INDICATION_TYPE_ERROR and the failure reason specified in WDI_TLV_SAE_STATUS.

Timeouts and retransmissions

These are handled by the driver.

WPA3-SAE association

The device connects to an SAE network using one of the following options.

(Re)Association following SAE exchange

This is normally the first association attempt to an SAE network. The driver sets the SAE AKM in the RSN IE in the Association Request frame.

(Re)Association using PMKID

If WDI provided a PMKID for the BSS entry in the connect/roam task, then the driver does the following:

  1. The driver performs an Open authentication followed by inclusion of the PMKID in the (Re)association request.
  2. If the device does not receive a response from the AP within a short time, or if the AP returns an association error in the response, the driver skips SE authentication with this AP and either moves to another AP, or falls back to doing full SAE authentication with this AP.

SAE connection completes once the SAE authentication/association is complete. As before, the driver sends the following indications on conclusion of the connect or roam task:

Error handling

Resending the SAE Commit request frame

If the driver needs to resend a Commit frame due to a timeout, it can either resend the original Scalar/Element values that were provided by WDI, or request a new set of Scalar/Element values from WDI with an NDIS_STATUS_WDI_INDICATION_SAE_AUTH_PARAMS_NEEDED indication.

Resending the SAE Confirm response frame

If the driver needs to resend a Confirm frame due to a timeout, it should request a new set of SendConfirm and Confirm values from WDI with an NDIS_STATUS_WDI_INDICATION_SAE_AUTH_PARAMS_NEEDED indication, setting the type to WDI_SAE_INDICATION_TYPE_CONFIRM_REQUEST_RESEND_REQUEST.

Wi-Fi 7 SAE authentication changes

For Wi-Fi 7 SAE authentication updates, see WiFiCx Wi-Fi 7 feature requirements.