This section describes the general APDU command set requirements for non-ISO14443-4 compliant cards (known as storage cards).
General-Authenticate command
The General-Authenticate command is used to perform the authentication sequence on a MIFARE card. This command is only applicable for MIFARE Mini, Classic 1k and 4k cards.
General-Authenticate command format
Command
Class
INS
P1
P2
Lc
Data In
General-Authenticate
0xFF
0x86
0x00
0x00
0x01
Address MSB, Address LSB, Key Type A or B, Key Number
General-Authenticate response format
Response
SW1, SW2
Get-Data command
The Get-Data command is used to retrieve information from the contactless NFC tag/card.
Get-Data command format
Command
Class
INS
P1
P2
L2
Get-Data
0xFF
0xCA
0x00: Serial number of the card (ISO14443-A: UID, ISO14443-B: PUPI, Felica: IDm, Jewel: RID)
0x01: Historical bytes of the card (Type A: Historical bytes from ATR, Type B: ATTRIB response)
0x00
0x00
Get-Data response format
Response
Data out, SW1, SW2
Load-Key command
The Load-Key command is used to store MIFARE keys in the driver. This command is only applicable for MIFARE Mini, Classic 1k and 4k cards.
Load-Key command format
Command
Class
INS
P1
P2
Lc
Data In
Load-Key
0xFF
0x82
Key Structure
Key Number
0x6
Key Value
Load-Key response format
Response
SW1, SW2
Manage Session command
The implementation of this command should be per the PCSC specification.
Manage Session command format
Command
Class
INS
P1
P2
Lc
Data In
General Authenticate
0xFF
0xC2
0x00
0x00
Variable
TLV Data Object
The following are required TLV data objects to be supported by the driver:
Tag
Data Object
0x80
Version data object
0x81
Start Transparent Session
0x82
End Transparent Session
Read-Binary command
The Read-Binary command is used to read data from the contactless NFC tag/card. The command is applicable only for storage cards (MIFARE Classic/UL, Felica, ISO15693 and Jewel/Topaz cards).
Read-Binary command format
Command
Class
INS
P1
P2
Lc
Data In
Li
Read-Binary
0xFF
0xB0
Address MSB
Address LSB
Length of Data In
Data
Length expected
Read-Binary MIFARE family
Command
CLA
INS
P1
P2
Le
UL READ 16
0xFF
0xB0
0x00
0x00 to 0x15
0x10
CL 1k READ 16
0xFF
0xB0
0x00
0x00 to 0x3F
0x10
CL 4k READ 16
0xFF
0xB0
0x00
0x00 to 0xFF
0x10
Read-Binary Jewel family
Command
CLA
INS
P1
P2
Le
READ ALL
0xFF
0xB0
0x00
0x00
0x00
RID
0xFF
0xB0
0x00
0x00
0x06
READ
0xFF
0xB0
Block No
Block Offset
0x01
READ 8
0xFF
0xB0
Block No
0x00
0x08
READ SEG
0xFF
0xB0
0x00
Segment Addr
0x80
Read-Binary Felica family
Command
CLA
INS
P1
P2
Lc
Data In
CHECK
0xFF
0xB0
0x00
0x00
Length of Data In
Number of Service, Number of Blocks, Block list
ISO 15693 family
Command
CLA
INS
P1
P2
Le
READ
0xFF
0xB0
Block Number
0x00
0x04
ISO 15693 family Response
Response
Data out, SW1, SW2
Transparent exchange command
Transparent exchange command format
Command
Class
INS
P1
P2
Lc
Data In
General Authenticate
0xFF
0xC2
0x00
0x01
Variable
TLV Data Object
The following are the required TLV data objects for Transparent Exchange Command to be supported by the driver for transparent exchange of commands to storage cards:
Tag
Data Object
0x95
Transceive - Transmit and receive
0x5F46
Timer
Update-Binary command
The Update-Binary command is used to write data to the contactless NFC tag/card. The command is applicable only for storage cards (MIFARE Classic/UL, Felica, ISO15693 and Jewel/Topaz cards). The format of the request and response for the command is as described below.
Hamarosan elérhető: 2024-ben fokozatosan kivezetjük a GitHub-problémákat a tartalom visszajelzési mechanizmusaként, és lecseréljük egy új visszajelzési rendszerre. További információ: https://aka.ms/ContentUserFeedback.
Visszajelzés küldése és megtekintése a következőhöz: