EventLog.RegisterDisplayName(String, Int64) Metode

Definisi

Ruang nama:

System.Diagnostics

Rakitan:

System.Diagnostics.EventLog.dll

Paket:

System.Diagnostics.EventLog v8.0.0

Sumber:

EventLog.cs

Menentukan nama log peristiwa yang dilokalkan, yang ditampilkan di server Pemantau Peristiwa.

public:
 void RegisterDisplayName(System::String ^ resourceFile, long resourceId);

public void RegisterDisplayName (string resourceFile, long resourceId);

member this.RegisterDisplayName : string * int64 -> unit

Public Sub RegisterDisplayName (resourceFile As String, resourceId As Long)

Parameter

resourceFile

String

Jalur yang ditentukan sepenuhnya ke file sumber daya yang dilokalkan.

resourceId

Int64

Pengidentifikasi sumber daya yang mengindeks string yang dilokalkan dalam file sumber daya.

Pengecualian

InvalidOperationException

Nilai Log bukan nama log yang valid.

-atau-

Kunci registri untuk log kejadian tidak dapat dibuka pada komputer target.

ArgumentNullException

resourceFileadalah null.

Contoh

Contoh berikut menentukan apakah sumber peristiwa bernama SampleApplicationSource terdaftar di komputer lokal. Jika sumber peristiwa tidak ada, contoh mengatur file sumber daya pesan untuk sumber dan membuat sumber peristiwa baru. Terakhir, contoh menetapkan nama tampilan yang dilokalkan untuk log peristiwa, menggunakan nilai pengidentifikasi sumber daya di DisplayNameMsgId dan jalur file sumber daya di messageFile.

void CreateEventSourceSample1( String^ messageFile )
{
   String^ myLogName;
   String^ sourceName = "SampleApplicationSource";
   
   // Create the event source if it does not exist.
   if (  !EventLog::SourceExists( sourceName ) )
   {
      
      // Create a new event source for the custom event log
      // named "myNewLog."  
      myLogName = "myNewLog";
      EventSourceCreationData ^ mySourceData = gcnew EventSourceCreationData( sourceName,myLogName );
      
      // Set the message resource file that the event source references.
      // All event resource identifiers correspond to text in this file.
      if (  !System::IO::File::Exists( messageFile ) )
      {
         Console::WriteLine( "Input message resource file does not exist - {0}", messageFile );
         messageFile = "";
      }
      else
      {
         
         // Set the specified file as the resource
         // file for message text, category text, and 
         // message parameter strings.  
         mySourceData->MessageResourceFile = messageFile;
         mySourceData->CategoryResourceFile = messageFile;
         mySourceData->CategoryCount = CategoryCount;
         mySourceData->ParameterResourceFile = messageFile;
         Console::WriteLine( "Event source message resource file set to {0}", messageFile );
      }

      Console::WriteLine( "Registering new source for event log." );
      EventLog::CreateEventSource( mySourceData );
   }
   else
   {
      
      // Get the event log corresponding to the existing source.
      myLogName = EventLog::LogNameFromSourceName( sourceName, "." );
   }

   
   // Register the localized name of the event log.
   // For example, the actual name of the event log is "myNewLog," but
   // the event log name displayed in the Event Viewer might be
   // "Sample Application Log" or some other application-specific
   // text.
   EventLog^ myEventLog = gcnew EventLog( myLogName,".",sourceName );
   if ( messageFile->Length > 0 )
   {
      myEventLog->RegisterDisplayName( messageFile, DisplayNameMsgId );
   }   
}

static void CreateEventSourceSample1(string messageFile)
{
    string myLogName;
    string sourceName = "SampleApplicationSource";

    // Create the event source if it does not exist.
    if(!EventLog.SourceExists(sourceName))
    {
        // Create a new event source for the custom event log
        // named "myNewLog."

        myLogName = "myNewLog";
        EventSourceCreationData mySourceData = new EventSourceCreationData(sourceName, myLogName);

        // Set the message resource file that the event source references.
        // All event resource identifiers correspond to text in this file.
        if (!System.IO.File.Exists(messageFile))
        {
            Console.WriteLine("Input message resource file does not exist - {0}",
                messageFile);
            messageFile = "";
        }
        else
        {
            // Set the specified file as the resource
            // file for message text, category text, and
            // message parameter strings.

            mySourceData.MessageResourceFile = messageFile;
            mySourceData.CategoryResourceFile = messageFile;
            mySourceData.CategoryCount = CategoryCount;
            mySourceData.ParameterResourceFile = messageFile;

            Console.WriteLine("Event source message resource file set to {0}",
                messageFile);
        }

        Console.WriteLine("Registering new source for event log.");
        EventLog.CreateEventSource(mySourceData);
    }
    else
    {
        // Get the event log corresponding to the existing source.
        myLogName = EventLog.LogNameFromSourceName(sourceName,".");
    }

    // Register the localized name of the event log.
    // For example, the actual name of the event log is "myNewLog," but
    // the event log name displayed in the Event Viewer might be
    // "Sample Application Log" or some other application-specific
    // text.
    EventLog myEventLog = new EventLog(myLogName, ".", sourceName);

    if (messageFile.Length > 0)
    {
        myEventLog.RegisterDisplayName(messageFile, DisplayNameMsgId);
    }
}

Public Shared Sub CreateEventSourceSample1(ByVal messageFile As String)

    Dim myLogName As String
    Dim sourceName As String = "SampleApplicationSource"

    ' Create the event source if it does not exist.
    If Not EventLog.SourceExists(sourceName)
    
        ' Create a new event source for the custom event log
        ' named "myNewLog."  

        myLogName = "myNewLog"
        Dim mySourceData As EventSourceCreationData = New EventSourceCreationData(sourceName, myLogName)

        ' Set the message resource file that the event source references.
        ' All event resource identifiers correspond to text in this file.
        If Not System.IO.File.Exists(messageFile)

            Console.WriteLine("Input message resource file does not exist - {0}", _
                messageFile)
            messageFile = ""
        Else 
            ' Set the specified file as the resource
            ' file for message text, category text and 
            ' message parameters strings.

            mySourceData.MessageResourceFile = messageFile
            mySourceData.CategoryResourceFile = messageFile
            mySourceData.CategoryCount = CategoryCount
            mySourceData.ParameterResourceFile = messageFile

            Console.WriteLine("Event source message resource file set to {0}", _
                messageFile)
        End If

        Console.WriteLine("Registering new source for event log.")
        EventLog.CreateEventSource(mySourceData)
    Else
        ' Get the event log corresponding to the existing source.
        myLogName = EventLog.LogNameFromSourceName(sourceName,".")
    End If

    ' Register the localized name of the event log.
    ' For example, the actual name of the event log is "myNewLog," but
    ' the event log name displayed in the Event Viewer might be
    ' "Sample Application Log" or some other application-specific
    ' text.
    Dim myEventLog As EventLog = New EventLog(myLogName, ".", sourceName)
    
    If messageFile.Length > 0
        myEventLog.RegisterDisplayName(messageFile, DisplayNameMsgId)
    End If
End Sub

Contohnya menggunakan file teks pesan berikut, yang disertakan dalam pustaka sumber daya EventLogMsgs.dll. File teks pesan adalah sumber dari mana file sumber daya pesan dibuat. File teks pesan menentukan pengidentifikasi sumber daya dan teks untuk kategori, pesan peristiwa, dan string penyisipan parameter. Secara khusus, pengidentifikasi sumber daya 5001 didefinisikan untuk nama log peristiwa yang dilokalkan.

; // EventLogMsgs.mc  
; // ********************************************************  

; // Use the following commands to build this file:  

; //   mc -s EventLogMsgs.mc  
; //   rc EventLogMsgs.rc  
; //   link /DLL /SUBSYSTEM:WINDOWS /NOENTRY /MACHINE:x86 EventLogMsgs.Res   
; // ********************************************************  

; // - Event categories -  
; // Categories must be numbered consecutively starting at 1.  
; // ********************************************************  

MessageId=0x1  
Severity=Success  
SymbolicName=INSTALL_CATEGORY  
Language=English  
Installation  
.  

MessageId=0x2  
Severity=Success  
SymbolicName=QUERY_CATEGORY  
Language=English  
Database Query  
.  

MessageId=0x3  
Severity=Success  
SymbolicName=REFRESH_CATEGORY  
Language=English  
Data Refresh  
.  

; // - Event messages -  
; // *********************************  

MessageId = 1000  
Severity = Success  
Facility = Application  
SymbolicName = AUDIT_SUCCESS_MESSAGE_ID_1000  
Language=English  
My application message text, in English, for message id 1000, called from %1.  
.  

MessageId = 1001  
Severity = Warning  
Facility = Application  
SymbolicName = AUDIT_FAILED_MESSAGE_ID_1001  
Language=English  
My application message text, in English, for message id 1001, called from %1.  
.  

MessageId = 1002  
Severity = Success  
Facility = Application  
SymbolicName = GENERIC_INFO_MESSAGE_ID_1002  
Language=English  
My generic information message in English, for message id 1002.  
.  

MessageId = 1003  
Severity = Warning  
Facility = Application  
SymbolicName = GENERIC_WARNING_MESSAGE_ID_1003  
Language=English  
My generic warning message in English, for message id 1003, called from %1.  
.  

MessageId = 1004  
Severity = Success  
Facility = Application  
SymbolicName = UPDATE_CYCLE_COMPLETE_MESSAGE_ID_1004  
Language=English  
The update cycle is complete for %%5002.  
.  

MessageId = 1005  
Severity = Warning  
Facility = Application  
SymbolicName = SERVER_CONNECTION_DOWN_MESSAGE_ID_1005  
Language=English  
The refresh operation did not complete because the connection to server %1 could not be established.  
.  

; // - Event log display name -  
; // ********************************************************  

MessageId = 5001  
Severity = Success  
Facility = Application  
SymbolicName = EVENT_LOG_DISPLAY_NAME_MSGID  
Language=English  
Sample Event Log  
.  

; // - Event message parameters -  
; //   Language independent insertion strings  
; // ********************************************************  

MessageId = 5002  
Severity = Success  
Facility = Application  
SymbolicName = EVENT_LOG_SERVICE_NAME_MSGID  
Language=English  
SVC_UPDATE.EXE  
.  

Keterangan

Gunakan RegisterDisplayName untuk mendaftar dan menampilkan nama yang dilokalkan di Pemantau Peristiwa untuk log peristiwa kustom.

Pengidentifikasi sumber daya yang ditentukan harus sesuai dengan string yang dilokalkan yang ditentukan dalam file sumber daya. Pemantau Peristiwa menampilkan nama log peristiwa kustom menggunakan string yang dilokalkan dan pengaturan budaya saat ini. Misalnya, Anda dapat menentukan beberapa nama log peristiwa yang dilokalkan untuk budaya yang berbeda dalam file sumber daya Anda. Pemantau Peristiwa menampilkan string yang dilokalkan yang sesuai dengan pengaturan budaya pengguna saat ini.

Jika Pemantau Peristiwa tidak dapat memuat string yang dilokalkan dari file sumber daya, atau jika tidak ada nama tampilan yang terdaftar untuk log peristiwa, maka Pemantau Peristiwa menampilkan nama log peristiwa yang ditentukan dalam Log.

Catatan

Anda tidak perlu mendaftarkan nama tampilan untuk log peristiwa yang telah ditentukan sebelumnya. Sistem operasi mendaftarkan nama tampilan yang dilokalkan untuk log peristiwa Aplikasi, Sistem, dan Keamanan.

Lihat juga

• LogDisplayName