Cara: Memvalidasi dan Menggabungkan PrintTickets

Microsoft Windows Print Schema mencakup elemen PrintCapabilities dan PrintTicket yang fleksibel dan dapat diperluas. Yang pertama merinci kemampuan perangkat cetak dan yang terakhir menentukan bagaimana perangkat harus menggunakan kemampuan tersebut terhadap urutan dokumen, dokumen individual, atau halaman individual tertentu.

Urutan tugas umum untuk aplikasi yang mendukung pencetakan adalah sebagai berikut.

Tentukan kemampuan printer.
Konfigurasikan PrintTicket untuk menggunakan kemampuan tersebut.
Validasi PrintTicket.

Artikel ini memperlihatkan cara melakukan ini.

Contoh

Dalam contoh sederhana di bawah ini, kami hanya tertarik pada apakah printer dapat mendukung dupleksing — pencetakan dua sisi. Langkah-langkah utamanya adalah sebagai berikut.

Dapatkan objek PrintCapabilities dengan metode GetPrintCapabilities.
Uji keberadaan kemampuan yang Anda inginkan. Dalam contoh di bawah ini, kami menguji properti DuplexingCapability dari objek PrintCapabilities untuk mengetahui apakah terdapat kemampuan mencetak di dua sisi lembaran kertas dengan "pembalikan halaman" di sepanjang sisi panjang lembaran kertas. Karena DuplexingCapability adalah himpunan, kami menggunakan metode Contains dari ReadOnlyCollection<T>.

Nota

Langkah ini tidak benar-benar diperlukan. Metode MergeAndValidatePrintTicket yang digunakan di bawah ini akan memeriksa setiap permintaan dalam PrintTicket terhadap kemampuan printer. Jika kemampuan yang diminta tidak didukung oleh printer, driver printer akan menggantikan permintaan alternatif dalam PrintTicket yang dikembalikan oleh metode tersebut.
Jika printer mendukung pencetakan dua sisi, contoh kode membuat PrintTicket yang meminta pencetakan dua sisi. Tetapi aplikasi tidak menentukan setiap kemungkinan pengaturan printer yang tersedia di elemen PrintTicket. Itu akan menjadi pemborosan waktu bagi programmer dan program. Sebaliknya, kode hanya mengatur permintaan duplex dan kemudian menggabungkan PrintTicket ini dengan PrintTicketyang sudah ada, dikonfigurasi sepenuhnya dan divalidasi, dalam hal ini, setelan default pengguna PrintTicket.
Oleh karena itu, sampel menggunakan metode MergeAndValidatePrintTicket untuk menggabungkan PrintTicket yang minimal dan baru dengan PrintTicketdefault pengguna. Ini mengembalikan ValidationResult yang menyertakan PrintTicket baru sebagai salah satu propertinya.
Sampel kemudian menguji bahwa PrintTicket baru meminta dupleks. Jika ya, maka sampel menjadikannya tiket cetak default baru untuk pengguna. Jika langkah 2 di atas diabaikan dan printer tidak mendukung mencetak dupleks pada sisi panjang, maka hasil pengujiannya adalah false. (Lihat catatan di atas.)
Langkah signifikan terakhir adalah menerapkan perubahan pada properti UserPrintTicket dari PrintQueue menggunakan metode Commit.

/// <summary>
/// Changes the user-default PrintTicket setting of the specified print queue.
/// </summary>
/// <param name="queue">the printer whose user-default PrintTicket setting needs to be changed</param>
static private void ChangePrintTicketSetting(PrintQueue queue)
{
    //
    // Obtain the printer's PrintCapabilities so we can determine whether or not
    // duplexing printing is supported by the printer.
    //
    PrintCapabilities printcap = queue.GetPrintCapabilities();

    //
    // The printer's duplexing capability is returned as a read-only collection of duplexing options
    // that can be supported by the printer. If the collection returned contains the duplexing
    // option we want to set, it means the duplexing option we want to set is supported by the printer,
    // so we can make the user-default PrintTicket setting change.
    //
    if (printcap.DuplexingCapability.Contains(Duplexing.TwoSidedLongEdge))
    {
        //
        // To change the user-default PrintTicket, we can first create a delta PrintTicket with
        // the new duplexing setting.
        //
        PrintTicket deltaTicket = new PrintTicket();
        deltaTicket.Duplexing = Duplexing.TwoSidedLongEdge;

        //
        // Then merge the delta PrintTicket onto the printer's current user-default PrintTicket,
        // and validate the merged PrintTicket to get the new PrintTicket we want to set as the
        // printer's new user-default PrintTicket.
        //
        ValidationResult result = queue.MergeAndValidatePrintTicket(queue.UserPrintTicket, deltaTicket);

        //
        // The duplexing option we want to set could be constrained by other PrintTicket settings
        // or device settings. We can check the validated merged PrintTicket to see whether the
        // the validation process has kept the duplexing option we want to set unchanged.
        //
        if (result.ValidatedPrintTicket.Duplexing == Duplexing.TwoSidedLongEdge)
        {
            //
            // Set the printer's user-default PrintTicket and commit the set operation.
            //
            queue.UserPrintTicket = result.ValidatedPrintTicket;
            queue.Commit();
            Console.WriteLine("PrintTicket new duplexing setting is set on '{0}'.", queue.FullName);
        }
        else
        {
            //
            // The duplexing option we want to set has been changed by the validation process
            // when it was resolving setting constraints.
            //
            Console.WriteLine("PrintTicket new duplexing setting is constrained on '{0}'.", queue.FullName);
        }
    }
    else
    {
        //
        // If the printer doesn't support the duplexing option we want to set, skip it.
        //
        Console.WriteLine("PrintTicket new duplexing setting is not supported on '{0}'.", queue.FullName);
    }
}

''' <summary>
''' Changes the user-default PrintTicket setting of the specified print queue.
''' </summary>
''' <param name="queue">the printer whose user-default PrintTicket setting needs to be changed</param>
Private Shared Sub ChangePrintTicketSetting(ByVal queue As PrintQueue)
    '
    ' Obtain the printer's PrintCapabilities so we can determine whether or not
    ' duplexing printing is supported by the printer.
    '
    Dim printcap As PrintCapabilities = queue.GetPrintCapabilities()

    '
    ' The printer's duplexing capability is returned as a read-only collection of duplexing options
    ' that can be supported by the printer. If the collection returned contains the duplexing
    ' option we want to set, it means the duplexing option we want to set is supported by the printer,
    ' so we can make the user-default PrintTicket setting change.
    '
    If printcap.DuplexingCapability.Contains(Duplexing.TwoSidedLongEdge) Then
        '
        ' To change the user-default PrintTicket, we can first create a delta PrintTicket with
        ' the new duplexing setting.
        '
        Dim deltaTicket As New PrintTicket()
        deltaTicket.Duplexing = Duplexing.TwoSidedLongEdge

        '
        ' Then merge the delta PrintTicket onto the printer's current user-default PrintTicket,
        ' and validate the merged PrintTicket to get the new PrintTicket we want to set as the
        ' printer's new user-default PrintTicket.
        '
        Dim result As ValidationResult = queue.MergeAndValidatePrintTicket(queue.UserPrintTicket, deltaTicket)

        '
        ' The duplexing option we want to set could be constrained by other PrintTicket settings
        ' or device settings. We can check the validated merged PrintTicket to see whether the
        ' the validation process has kept the duplexing option we want to set unchanged.
        '
        If result.ValidatedPrintTicket.Duplexing = Duplexing.TwoSidedLongEdge Then
            '
            ' Set the printer's user-default PrintTicket and commit the set operation.
            '
            queue.UserPrintTicket = result.ValidatedPrintTicket
            queue.Commit()
            Console.WriteLine("PrintTicket new duplexing setting is set on '{0}'.", queue.FullName)
        Else
            '
            ' The duplexing option we want to set has been changed by the validation process
            ' when it was resolving setting constraints.
            '
            Console.WriteLine("PrintTicket new duplexing setting is constrained on '{0}'.", queue.FullName)
        End If
    Else
        '
        ' If the printer doesn't support the duplexing option we want to set, skip it.
        '
        Console.WriteLine("PrintTicket new duplexing setting is not supported on '{0}'.", queue.FullName)
    End If
End Sub

Sehingga Anda dapat dengan cepat menguji contoh ini, sisanya disajikan di bawah ini. Buat proyek dan namespace lalu tempelkan cuplikan kode dalam artikel ini ke dalam blok namespace.

/// <summary>
/// Displays the correct command line syntax to run this sample program.
/// </summary>
static private void DisplayUsage()
{
    Console.WriteLine();
    Console.WriteLine("Usage #1: printticket.exe -l \"<printer_name>\"");
    Console.WriteLine("      Run program on the specified local printer");
    Console.WriteLine();
    Console.WriteLine("      Quotation marks may be omitted if there are no spaces in printer_name.");
    Console.WriteLine();
    Console.WriteLine("Usage #2: printticket.exe -r \"\\\\<server_name>\\<printer_name>\"");
    Console.WriteLine("      Run program on the specified network printer");
    Console.WriteLine();
    Console.WriteLine("      Quotation marks may be omitted if there are no spaces in server_name or printer_name.");
    Console.WriteLine();
    Console.WriteLine("Usage #3: printticket.exe -a");
    Console.WriteLine("      Run program on all installed printers");
    Console.WriteLine();
}

[STAThread]
static public void Main(string[] args)
{
    try
    {
        if ((args.Length == 1) && (args[0] == "-a"))
        {
            //
            // Change PrintTicket setting for all local and network printer connections.
            //
            LocalPrintServer server = new LocalPrintServer();

            EnumeratedPrintQueueTypes[] queue_types = {EnumeratedPrintQueueTypes.Local,
                                                       EnumeratedPrintQueueTypes.Connections};

            //
            // Enumerate through all the printers.
            //
            foreach (PrintQueue queue in server.GetPrintQueues(queue_types))
            {
                //
                // Change the PrintTicket setting queue by queue.
                //
                ChangePrintTicketSetting(queue);
            }
        }//end if -a

        else if ((args.Length == 2) && (args[0] == "-l"))
        {
            //
            // Change PrintTicket setting only for the specified local printer.
            //
            LocalPrintServer server = new LocalPrintServer();
            PrintQueue queue = new PrintQueue(server, args[1]);
            ChangePrintTicketSetting(queue);
        }//end if -l

        else if ((args.Length == 2) && (args[0] == "-r"))
        {
            //
            // Change PrintTicket setting only for the specified remote printer.
            //
            String serverName = args[1].Remove(args[1].LastIndexOf(@"\"));
            String printerName = args[1].Remove(0, args[1].LastIndexOf(@"\")+1);
            PrintServer ps = new PrintServer(serverName);
            PrintQueue queue = new PrintQueue(ps, printerName);
            ChangePrintTicketSetting(queue);
         }//end if -r

        else
        {
            //
            // Unrecognized command line.
            // Show user the correct command line syntax to run this sample program.
            //
            DisplayUsage();
        }
    }
    catch (Exception e)
    {
        Console.WriteLine(e.Message);
        Console.WriteLine(e.StackTrace);

        //
        // Show inner exception information if it's provided.
        //
        if (e.InnerException != null)
        {
            Console.WriteLine("--- Inner Exception ---");
            Console.WriteLine(e.InnerException.Message);
            Console.WriteLine(e.InnerException.StackTrace);
        }
    }
    finally
    {
        Console.WriteLine("Press Return to continue...");
        Console.ReadLine();
    }
}//end Main

''' <summary>
''' Displays the correct command line syntax to run this sample program.
''' </summary>
Private Shared Sub DisplayUsage()
    Console.WriteLine()
    Console.WriteLine("Usage #1: printticket.exe -l ""<printer_name>""")
    Console.WriteLine("      Run program on the specified local printer")
    Console.WriteLine()
    Console.WriteLine("      Quotation marks may be omitted if there are no spaces in printer_name.")
    Console.WriteLine()
    Console.WriteLine("Usage #2: printticket.exe -r ""\\<server_name>\<printer_name>""")
    Console.WriteLine("      Run program on the specified network printer")
    Console.WriteLine()
    Console.WriteLine("      Quotation marks may be omitted if there are no spaces in server_name or printer_name.")
    Console.WriteLine()
    Console.WriteLine("Usage #3: printticket.exe -a")
    Console.WriteLine("      Run program on all installed printers")
    Console.WriteLine()
End Sub


<STAThread>
Public Shared Sub Main(ByVal args() As String)
    Try
        If (args.Length = 1) AndAlso (args(0) = "-a") Then
            '
            ' Change PrintTicket setting for all local and network printer connections.
            '
            Dim server As New LocalPrintServer()

            Dim queue_types() As EnumeratedPrintQueueTypes = {EnumeratedPrintQueueTypes.Local, EnumeratedPrintQueueTypes.Connections}

            '
            ' Enumerate through all the printers.
            '
            For Each queue As PrintQueue In server.GetPrintQueues(queue_types)
                '
                ' Change the PrintTicket setting queue by queue.
                '
                ChangePrintTicketSetting(queue)
            Next queue 'end if -a

        ElseIf (args.Length = 2) AndAlso (args(0) = "-l") Then
            '
            ' Change PrintTicket setting only for the specified local printer.
            '
            Dim server As New LocalPrintServer()
            Dim queue As New PrintQueue(server, args(1))
            ChangePrintTicketSetting(queue) 'end if -l

        ElseIf (args.Length = 2) AndAlso (args(0) = "-r") Then
            '
            ' Change PrintTicket setting only for the specified remote printer.
            '
            Dim serverName As String = args(1).Remove(args(1).LastIndexOf("\"))
            Dim printerName As String = args(1).Remove(0, args(1).LastIndexOf("\")+1)
            Dim ps As New PrintServer(serverName)
            Dim queue As New PrintQueue(ps, printerName)
            ChangePrintTicketSetting(queue) 'end if -r

        Else
            '
            ' Unrecognized command line.
            ' Show user the correct command line syntax to run this sample program.
            '
            DisplayUsage()
        End If
    Catch e As Exception
        Console.WriteLine(e.Message)
        Console.WriteLine(e.StackTrace)

        '
        ' Show inner exception information if it's provided.
        '
        If e.InnerException IsNot Nothing Then
            Console.WriteLine("--- Inner Exception ---")
            Console.WriteLine(e.InnerException.Message)
            Console.WriteLine(e.InnerException.StackTrace)
        End If
    Finally
        Console.WriteLine("Press Return to continue...")
        Console.ReadLine()
    End Try
End Sub

Lihat juga

Saran dan Komentar

Apakah halaman ini membantu?

Last updated on 2025-05-07

Bagikan melalui

Cara: Memvalidasi dan Menggabungkan PrintTickets

Contoh

Lihat juga

Saran dan Komentar

Sumber Daya Tambahan: