Breyta

Deila með

Plan and manage costs for Azure Cosmos DB

  • Grein

APPLIES TO: NoSQL MongoDB Cassandra Gremlin Table

This article describes how you can plan and manage costs for Azure Cosmos DB. First, you use the Azure Cosmos DB capacity calculator to estimate your workload cost before you create any resources. Later you can review the estimated cost and start creating your resources.

After you've started using Azure Cosmos DB resources, use the Cost Management features to set budgets and monitor costs. You can also review forecasted costs and identify spending trends to identify areas where you might want to act. The costs for Azure Cosmos DB are only a portion of the monthly costs in your Azure bill. Although this article explains how to plan for and manage costs for Azure Cosmos DB, you're billed for all Azure services and resources used in your Azure subscription, including the third-party services.

Prerequisites

Provisioned throughput or serverless

Azure Cosmos DB supports two types of capacity modes: provisioned throughput and serverless. The way you get charged for your Azure Cosmos DB usage varies a lot between these two modes, so it's important to choose the one that works best for your workload. See the how to choose between provisioned throughput and serverless article for guidance and recommendations on how to make this choice.

Cost analysis

Cost analysis in Cost Management supports most Azure account types, but not all of them. To view the full list of supported account types, see Understand Cost Management data. To view cost data, you need at least read access for an Azure account. For information about assigning access to Azure Cost Management data, see Assign access to data.

Estimate costs before using Azure Cosmos DB

Azure Cosmos DB is available in two different capacity modes: provisioned throughput and serverless. You can perform the exact same database operations in both modes, but the way you get billed for these operations is different.

Capacity planning

As an aid for estimating costs, it can be helpful to do capacity planning for a migration to Azure Cosmos DB. If you are planning a migration from an existing database cluster to Azure Cosmos DB, you can use information about your existing database cluster for capacity planning.

Migrate a replica set with 3 replicas of a four-core SKU to Azure Cosmos DB

Estimate provisioned throughput costs

If you plan to use Azure Cosmos DB in provisioned throughput mode, use the Azure Cosmos DB capacity calculator to estimate costs before you create the resources in an Azure Cosmos DB account. The capacity calculator is used to get an estimate of the required throughput and cost of your workload. The capacity calculator is currently available for API for NoSQL, Cassandra, and MongoDB only.

Configuring your Azure Cosmos DB databases and containers with the right amount of provisioned throughput, or Request Units (RU/s), for your workload is essential to optimize the cost and performance. You have to input details such as API type, number of regions, item size, read/write requests per second, total data stored to get a cost estimate. To learn more about the capacity calculator, see the estimate article.

Tip

To make sure you never exceed the provisioned throughput you've budgeted, limit your account's total provisioned throughput

The following screenshot shows the throughput and cost estimation by using the capacity calculator:

Capacity planner basic mode

Estimate serverless costs

If you plan to use Azure Cosmos DB in serverless mode, you need to estimate how many Request Units and GB of storage you may consume on a monthly basis. You can estimate the required amount of Request Units by evaluating the number of database operations that would be issued in a month, and multiply their amount by their corresponding RU cost. The following table lists estimated RU charges for common database operations:

Operation Estimated cost Notes
Create an item 5 RUs Average cost for a 1 KB item with less than 5 properties to index
Update an item 10 RUs Average cost for a 1 KB item with less than 5 properties to index
Read an individual item by its ID and partition key (point-read) 1 RU Average cost for a 1 KB item
Delete an item 5 RUs
Execute a query 10 RUs Average cost for a query that takes full advantage of indexing and returns 100 results or less

Important

Pay attention to the Notes from the table above. For a more accurate estimation of the actual costs of your operations, you can use the Azure Cosmos DB Emulator and measure the exact RU cost of your operations. Although the Azure Cosmos DB Emulator doesn't support serverless, it reports a standard RU charge for database operations and can be used for this estimation.

Once you have computed the total number of Request Units and GB of storage you're likely to consume over a month, the following formula will return your cost estimate: ([Number of Request units] / 1,000,000 * $0.25) + ([GB of storage] * $0.25).

Note

The costs shown in the previous example are for demonstration purposes only. See the pricing page for the latest pricing information.

Understand the full billing model

Azure Cosmos DB runs on Azure infrastructure that accrues costs when you deploy new resources. It's important to understand that there could be other additional infrastructure costs that might accrue.

How you're charged for Azure Cosmos DB

When you create or use Azure Cosmos DB resources, you might get charged for the following meters:

  • Database operations - You're charged for it based on the request units(RU/s) provisioned or consumed:

    • Standard (manual) provisioned throughput - You are billed an hourly rate for the RU/s provisioned on your container or database.
    • Autoscale provisioned throughput - You are billed based on the maximum number of RU/s the system scaled up to in each hour.

  • Consumed storage - You're charged for it based the total amount of storage (in GBs) consumed by your data and indexes for a given hour.

There is an additional charge in case you are using the Azure Cosmos DB features like backup storage, analytical storage, Availability zones, Multi-region writes. At the end of your billing cycle, the charges for each meter are summed. Your bill or invoice shows a section for all Azure Cosmos DB costs. There's a separate line item for each meter. To learn more, see the Pricing model article.

Using Azure Prepayment

You can pay for Azure Cosmos DB charges with your Azure Prepayment credit. However, you can't use Azure Prepayment credit to pay for charges for third party products and services including those from the Azure Marketplace.

Review estimated costs in the Azure portal

As you start using Azure Cosmos DB resources from Azure portal, you can see the estimated costs. Use the following steps to review the cost estimate:

  1. Sign into the Azure portal and navigate to your Azure Cosmos DB account.

  2. Go to the Overview section.

  3. Check the Cost chart at the bottom. This chart shows an estimate of your current cost over a configurable time period:

  4. Create a new container such as a graph container.

  5. Input the throughput required for your workload such as 400 RU/s. After you input the throughput value, you can see the pricing estimate as shown in the following screenshot:

    Cost estimate in Azure portal

If your Azure subscription has a spending limit, Azure prevents you from spending over your credit amount. As you create and use Azure resources, your credits are used. When you reach your credit limit, the resources that you deployed are disabled for the rest of that billing period. You can't change your credit limit, but you can remove it. For more information about spending limits, see Azure spending limit.

You can pay for Azure Cosmos DB charges with your Azure Prepayment (previously called monetary commitment) credit. However, you can't use the Azure Prepayment credit to pay for charges for third party products and services including those from the Azure Marketplace.

Monitor costs

As you use resources with Azure Cosmos DB, you incur costs. Resource usage unit costs vary by time intervals (seconds, minutes, hours, and days) or by request unit usage. As soon as usage of Azure Cosmos DB starts, costs are incurred and you can see them in the cost analysis pane in the Azure portal.

When you use cost analysis, you can view the Azure Cosmos DB costs in graphs and tables for different time intervals. Some examples are by day, current, prior month, and year. You can also view costs against budgets and forecasted costs. Switching to longer views over time can help you identify spending trends and see where overspending might have occurred. If you’ve created budgets, you can also easily see where they exceeded.

To view Azure Cosmos DB costs in cost analysis:

  1. Sign in to the Azure portal.

  2. Open the scope in the Azure portal and select Cost analysis in the menu. For example, go to Subscriptions, select a subscription from the list, and then select Cost analysis in the menu. Select Scope to switch to a different scope in cost analysis.

  3. By default, cost for all services are shown in the first donut chart. Select the area in the chart labeled "Azure Cosmos DB".

  4. To narrow costs for a single service such as Azure Cosmos DB, select Add filter and then select Service name. Then, choose Azure Cosmos DB from the list. Here’s an example showing costs for just Azure Cosmos DB:

    Monitor costs with Cost Analysis pane

In the preceding example, you see the current cost for Azure Cosmos DB for the month of Feb. The charts also contain Azure Cosmos DB costs by location and by resource group.

Create budgets

You can create budgets to manage costs and create alerts that automatically notify stakeholders of spending anomalies and overspending risks. Alerts are based on spending compared to budget and cost thresholds. Budgets and alerts are created for Azure subscriptions and resource groups, so they're useful as part of an overall cost monitoring strategy.

Budgets can be created with filters for specific resources or services in Azure if you want more granularity present in your monitoring. Filters help ensure that you don't accidentally create new resources that cost you additional money. For more about the filter options when you when create a budget, see Group and filter options.

Export cost data

You can also export your cost data to a storage account. This is helpful when you need or others to do additional data analysis for costs. For example, a finance teams can analyze the data using Excel or Power BI. You can export your costs on a daily, weekly, or monthly schedule and set a custom date range. Exporting cost data is the recommended way to retrieve cost datasets.

Other ways to manage and reduce costs

The following are some best practices you can use to reduce the costs:

  • Optimize provisioned throughput cost - This article details the best practices to optimize your throughput cost. It describes when to provision throughput at the container-level Vs at the database-level based on your workload type.

  • Optimize request cost - This article describes how read and write requests translate into request units and how to optimize the cost of these requests.

  • Optimize storage cost - Storage cost is billed on consumption basis. Learn how to optimize your storage cost with item size, indexing policy, by using features like change feed and time to live.

  • Optimize multi-region cost - If you have one or more under-utilized read regions you can take steps to make the maximum use of the RUs in read regions by using change feed from the read-region or move it to another secondary if over-utilized.

  • Optimize development/testing cost - Learn how to optimize your development cost by using the local emulator, the Azure Cosmos DB free tier, Azure free account and few other options.

  • Optimize cost with reserved capacity - Learn how to use reserved capacity to save money by committing to a reservation for Azure Cosmos DB resources for either one year or three years.

Next steps

See the following articles to learn more on how pricing works in Azure Cosmos DB: