PowerShell per Surface Hub (v1)

• Si applica a:

  Surface Hub

Nota

Questa pagina include script di PowerShell destinati a Surface Hub (v1) originale. Per Surface Hub 2S, vedere Creare e testare un account del dispositivo.

• Script di PowerShell per gli amministratori di Surface Hub
  • Creare un account locale
  • Creare un account del dispositivo con Office 365
  • Script di verifica degli account
  • Abilitare Skype for Business (EnableSfb.ps1)
• Cmdlet utili
  • Creazione di criteri di Exchange ActiveSync compatibili con Surface Hub
  • Consentire ID di dispositivo per ActiveSync
  • Accettazione e rifiuto automatici delle convocazioni riunione
  • Accettazione di convocazioni riunione esterne

Nota

Vedere anche Autenticazione moderna e script automatici in Exchange Online PowerShell V2

Prerequisiti

Per eseguire correttamente questi script di PowerShell, è necessario installare i prerequisiti seguenti:

• Assistente per l'accesso ai Microsoft Online Services per professionisti IT - RTW
• modulo Microsoft Azure Active Directory per Windows PowerShell (versione a 64 bit)
• Modulo di Windows PowerShell per Skype for Business online

Script di PowerShell per gli amministratori di Surface Hub

Qual è la funzione degli script?

• Creare account del dispositivo per le configurazioni tramite una singola foresta pura in locale (solo Microsoft Exchange e Skype 2013 e versioni successive) o online (Microsoft Office 365), correttamente configurati per il dispositivo Surface Hub.
• Convalidare gli account del dispositivo esistenti per qualsiasi configurazione (in locale o online) in modo da verificare che siano compatibili con Surface Hub.
• Fornire un modello di base per tutti gli utenti che vogliono creare i propri script di convalida o di creazione degli account del dispositivo.

Che cosa serve per eseguire gli script?

• L'accesso remoto di PowerShell al dominio o al tenant dell'organizzazione, server Exchange e server Skype for Business.
• Credenziali di amministratore per il dominio o il tenant dell'organizzazione, server Exchange e server Skype for Business.

Nota

Sia che si stia creando un nuovo account o modificando un account già esistente, lo script di convalida verifica che l'account del dispositivo sia configurato correttamente. Devi sempre eseguire lo script di convalida prima di aggiungere un account del dispositivo a Surface Hub.

Esecuzione degli script

Gli script di creazione dell'account eseguono le attività seguenti:

• Richiedere le credenziali di amministratore.
• Creare account del dispositivo nel dominio/tenant.
• Creare o assegnare un criterio ActiveSync compatibile con Surface Hub agli account del dispositivo.
• Impostare vari attributi per gli account creati in Exchange e Skype for Business.
• Assegnare licenze e autorizzazioni agli account creati.

Questi attributi sono gli attributi impostati dagli script:

Cmdlet	Attributo	Valore
Set-Mailbox	RoomMailboxPassword	Fornito dall'utente
	EnableRoomMailboxAccount	True
	Type	Room
Set-CalendarProcessing	AutomateProcessing	AutoAccept
	RemovePrivateProperty	False
	DeleteSubject	False
	DeleteComments	False
	AddOrganizerToSubject	False
	AddAdditionalResponse	True
	AdditionalResponse	"Questa è una sala Surface Hub!"
New-MobileDeviceMailboxPolicy	PasswordEnabled	False
	AllowNonProvisionableDevices	True
Enable-CSMeetingRoom	RegistrarPool	Fornito dall'utente
	SipAddress	Impostato sul nome dell'entità utente (UPN) dell'account del dispositivo
Set-MsolUserLicense (solo O365)	AddLicenses	Fornito dall'utente
Set-MsolUser (solo O365)	PasswordNeverExpires	True
Set-AdUser (solo locale)	Enabled	True
Set-AdUser (solo locale)	PasswordNeverExpires	True

Nota

I moduli di PowerShell di Azure AD e MSOnline sono deprecati a partire dal 30 marzo 2024. Per altre informazioni, vedere l'aggiornamento della deprecazione. Dopo questa data, il supporto per questi moduli è limitato all'assistenza per la migrazione a Microsoft Graph PowerShell SDK e alle correzioni per la sicurezza. I moduli deprecati continueranno a funzionare fino al 30 marzo 2025.

È consigliabile eseguire la migrazione a Microsoft Graph PowerShell per interagire con Microsoft Entra ID (in precedenza Azure AD). Per domande frequenti sulla migrazione, vedere Domande frequenti sulla migrazione.

Tenere presente che le versioni 1.0. x di MSOnline potrebbe verificarsi un'interruzione dopo il 30 giugno 2024.

Script di creazione degli account

Questi script creano automaticamente un account del dispositivo. Puoi usare lo Script di verifica degli account per assicurarti della corretta esecuzione.

Gli script di creazione degli account non possono modificare un account esistente, ma possono essere usati per comprendere quali cmdlet eseguire per configurare correttamente l'account esistente.

Creare un account locale

# SHAccountCreateOnPrem.ps1

$Error.Clear()
$ErrorActionPreference = "Stop"
$status = @{}

# Cleans up set state such as remote powershell sessions
function Cleanup()
{
    if ($sessExchange)
    {
        Remove-PSSession $sessExchange
    }
    if ($sessCS)
    {
        Remove-PSSession $sessCS
    }
}

function PrintError($strMsg)
{
    Write-Host $strMsg -foregroundcolor Red
}

function PrintSuccess($strMsg)
{
    Write-Host $strMsg -foregroundcolor Green
}

function PrintAction($strMsg)
{
    Write-Host $strMsg -ForegroundColor Cyan
}


# Cleans up and prints an error message
function CleanupAndFail($strMsg)
{
    if ($strMsg)
    {
        PrintError($strMsg);
    }
    Cleanup
    exit 1
}

# Exits if there is an error set and prints the given message
function ExitIfError($strMsg)
{
    if ($Error)
    {
        CleanupAndFail($strMsg);
    }
}

## Collect account data ##
$credNewAccount = (Get-Credential -Message "Enter the desired UPN and password for this new account")
$strUpn = $credNewAccount.UserName
$strDisplayName = Read-Host "Please enter the display name you would like to use for $strUpn"
if (!$credNewAccount -Or [System.String]::IsNullOrEmpty($strDisplayName) -Or [System.String]::IsNullOrEmpty($credNewAccount.UserName) -Or $credNewAccount.Password.Length -le 0)
{
    CleanupAndFail "Please enter all of the requested data to continue."
    exit 1
}

## Sign in to remote powershell for exchange and lync online ##

$credExchange = $null
$credExchange=Get-Credential -Message "Enter credentials of an Exchange user with mailbox creation rights"
if (!$credExchange)
{
    CleanupAndFail("Valid credentials are required to create and prepare the account.");
}
$strExchangeServer = Read-Host "Please enter the FQDN of your exchange server (e.g. exch.contoso.com)"

# Lync info
$credLync = Get-Credential -Message "Enter credentials of a Skype for Business admin (or cancel if they are the same as Exchange)"
if (!$credLync)
{
    $credLync = $credExchange
}
$strLyncFQDN = Read-Host "Please enter the FQDN of your Lync server (e.g. lync.contoso.com) or enter to use [$strExchangeServer]"
if ([System.String]::IsNullOrEmpty($strLyncFQDN))
{
    $strLyncFQDN = $strExchangeServer
}


PrintAction "Connecting to remote sessions. This can occasionally take a while - please do not enter input..."
try
{
    $sessExchange = New-PSSession -ConfigurationName microsoft.exchange -Credential $credExchange -AllowRedirection -Authentication Kerberos -ConnectionUri "http://$strExchangeServer/powershell" -WarningAction SilentlyContinue
}
catch
{
    CleanupAndFail("Failed to connect to exchange. Please check your credentials and try again. If this continues to fail, you may not have permission for remote powershell - if not, please perform the setup manually. Error message: $_")
}
PrintSuccess "Connected to Remote Exchange Shell"

try
{
    $sessLync = New-PSSession -Credential $credLync -ConnectionURI "https://$strLyncFQDN/OcsPowershell" -AllowRedirection -WarningAction SilentlyContinue
}
catch
{
    CleanupAndFail("Failed to connect to Lync. Please check your credentials and try again. Error message: $_")
}
PrintSuccess "Connected to Lync Server Remote PowerShell"


Import-PSSession $sessExchange -AllowClobber -WarningAction SilentlyContinue
Import-PSSession $sessLync -AllowClobber -WarningAction SilentlyContinue

## Create the Exchange mailbox ##
> [!Note]
> These exchange commandlets do not always throw their errors as exceptions

# Because Get-Mailbox throws an error if the mailbox isn't found
$Error.Clear()
PrintAction "Creating a new account..."
try
{
    $mailbox = $null
    $mailbox = (New-Mailbox -UserPrincipalName $credNewAccount.UserName -Alias $credNewAccount.UserName.substring(0,$credNewAccount.UserName.indexOf('@')) -room -Name $strDisplayName -RoomMailboxPassword $credNewAccount.Password -EnableRoomMailboxAccount $true)
} catch { }
ExitIfError "Failed to create a new mailbox on exchange.";
$status["Mailbox Setup"] = "Successfully created a mailbox for the new account"


$strEmail = $mailbox.WindowsEmailAddress
PrintSuccess "The following mailbox has been created for this room: $strEmail"

## Create or retrieve a policy to be applied to surface hub devices ##
# The policy disables requiring a device password so that the SurfaceHub does not need to be lockable to use Active Sync
$strPolicy = Read-Host 'Please enter the name for a new Surface Hub ActiveSync policy to be created and applied to this account.
We will configure that policy to be compatible with Surface Hub devices.
If this script has been used before, please enter the name of the existing policy.'

$easpolicy = $null
try {
    $easpolicy = Get-MobileDeviceMailboxPolicy $strPolicy
}
catch {}

if ($easpolicy)
{
    if (!$easpolicy.PasswordEnabled -and ($easpolicy.AllowNonProvisionableDevices -eq $null -or $easpolicy.AllowNonProvisionableDevices ))
    {
        PrintSuccess "An existing policy has been found and will be applied to this account."
    }
    else
    {
        PrintError "The policy you provided is incompatible with the surface hub."
        $easpolicy = $null
        $status["Device Password Policy"] = "Failed to apply the EAS policy to the account because the policy was invalid."
    }
}
else
{
    $Error.Clear()
    PrintAction "Creating policy..."
    $easpolicy = New-MobileDeviceMailboxPolicy -Name $strPolicy -PasswordEnabled $false -AllowNonProvisionableDevices $true
    if ($easpolicy)
    {
        PrintSuccess "A new device policy has been created; you can use this same policy for all future Surface Hub device accounts."
    }
    else
    {
        PrintError "Could not create $strPolicy"
    }
}

if ($easpolicy)
{
    # Convert mailbox to user type so we can apply the policy (necessary)
    # Sometimes it takes a while for this change to take affect so we have some nasty retry loops
    $Error.Clear();
    try
    {
        Set-Mailbox $credNewAccount.UserName -Type Regular
    } catch {}
    if ($Error)
    {
        $Error.Clear()
        $status["Device Password Policy"] = "Failed to apply the EAS policy to the account."
    }
    else
    {
        # Loop until resource type goes away, up to 5 times
        for ($i = 0; $i -lt 5 -And (Get-Mailbox $credNewAccount.UserName).ResourceType; $i++)
        {
            Start-Sleep -s 5
        }
        # If the mailbox is still a Room we cannot apply the policy
        if (!((Get-Mailbox $credNewAccount.UserName).ResourceType))
        {
            $Error.Clear()
            # Set policy for account
            Set-CASMailbox $credNewAccount.UserName -ActiveSyncMailboxPolicy $strPolicy
            if (!$Error)
            {
                $status["ActiveSync Policy"] = "Successfully applied $strPolicy to the account"
            }
            else
            {
                $status["ActiveSync Policy"] = "Failed to apply the EAS policy to the account."
            }
            $Error.Clear()

            # Convert back to room mailbox
            Set-Mailbox $credNewAccount.UserName -Type Room
            # Loop until resource type goes back to room
            for ($i = 0; ($i -lt 5) -And ((Get-Mailbox $credNewAccount.UserName).ResourceType -ne "Room"); $i++)
            {
                Start-Sleep -s 5
            }
            if ((Get-Mailbox $credNewAccount.UserName).ResourceType -ne "Room")
            {
                # A failure to convert the mailbox back to a room is unfortunate but means the mailbox is unusable.
                $status["Mailbox Setup"] = "A mailbox was created but we could not set it to a room resource type."
            }
            else
            {
                try
                {
                    Set-Mailbox $credNewAccount.UserName -RoomMailboxPassword $credNewAccount.Password -EnableRoomMailboxAccount $true
                } catch { }
                if ($Error)
                {
                    $status["Mailbox Setup"] = "A room mailbox was created but we could not set its password."
                }
                $Error.Clear()
            }

        }
    }
}
PrintSuccess "Account creation completed."

PrintAction "Setting calendar processing rules..."

$Error.Clear();
## Prepare the calendar for automatic meeting responses ##
try {
    Set-CalendarProcessing -Identity $credNewAccount.UserName -AutomateProcessing AutoAccept
} catch { }
if ($Error)
{
    $status["Calendar Acceptance"] = "Failed to configure the account to automatically accept/decline meeting requests"
}
else
{
    $status["Calendar Acceptance"] = "Successfully configured the account to automatically accept/decline meeting requests"
}


$Error.Clear()
try {
    Set-CalendarProcessing -Identity $credNewAccount.UserName -RemovePrivateProperty $false -AddOrganizerToSubject $false -AddAdditionalResponse $true -DeleteSubject $false -DeleteComments $false -AdditionalResponse "This is a Surface Hub room!"
} catch { }
if ($Error)
{
    $status["Calendar Response Configuration"] = "Failed to configure the account's response properties"
}
else
{
    $status["Calendar Response Configuration"] = "Successfully configured the account's response properties"
}

$Error.Clear()
## Configure the Account to not expire ##
PrintAction "Configuring password not to expire..."
Start-Sleep -s 20
try
{
    Set-AdUser $mailbox.UserPrincipalName -PasswordNeverExpires $true -Enabled $true
}
catch
{

}

if ($Error)
{
    $status["Password Expiration Policy"] = "Failed to set the password to never expire"
}
else
{
    $status["Password Expiration Policy"] = "Successfully set the password to never expire"
}

PrintSuccess "Completed Exchange configuration"

## Setup Skype for Business. This is somewhat optional and if it fails we SfbEnable can be used later ##
PrintAction "Configuring account for Skype for Business."

# Getting registrar pool
$strRegPool = $strLyncFQDN
$Error.Clear()
$strRegPoolEntry = Read-Host "Enter a Skype for Business Registrar Pool, or leave blank to use [$strRegPool]"
if (![System.String]::IsNullOrEmpty($strRegPoolEntry))
{
    $strRegPool = $strRegPoolEntry
}

# Try to SfB-enable the account. Note that it may not work right away as the account needs to propagate to active directory
PrintAction "Enabling Skype for Business..."
Start-Sleep -s 10
$Error.Clear()
try {
    Enable-CsMeetingRoom -Identity $credNewAccount.UserName -RegistrarPool $strRegPool -SipAddressType EmailAddress
}
catch { }

if ($Error)
{
    $status["Skype for Business Account Setup"] = "Failed to setup the Skype for Business meeting room - you can run EnableSfb.ps1 to try again."
    $Error.Clear();
}
else
{
    $status["Skype for Business Account Setup"] = "Successfully enabled account as a Skype for Business meeting room"
}

Write-Host

## Cleanup and print results ##
Cleanup
$strDisplay = $mailbox.DisplayName
$strUsr = $credNewAccount.UserName
PrintAction "Summary for creation of $strUsr ($strDisplay)"
if ($status.Count -gt 0)
{
    ForEach($k in $status.Keys)
    {
        $v = $status[$k]
        $color = "yellow"
        if ($v[0] -eq "S") { $color = "green" }
        elseif ($v[0] -eq "F")
        {
            $color = "red"
            $v += " Go to https://aka.ms/shubtshoot"
        }

        Write-Host -NoNewline $k -ForegroundColor $color
        Write-Host -NoNewline ": "
        Write-Host $v
    }
}
else
{
    PrintError "The account could not be created"
}

Creare un account del dispositivo con Office 365

Crea un account come descritto in Creare un account del dispositivo usando Office 365.

# SHAccountCreateO365.ps1

$Error.Clear()
$ErrorActionPreference = "Stop"
$status = @{}

# Cleans up set state such as remote powershell sessions
function Cleanup()
{
    if ($sessExchange)
    {
        Remove-PSSession $sessExchange
    }
    if ($sessCS)
    {
        Remove-PSSession $sessCS
    }
}

function PrintError($strMsg)
{
    Write-Host $strMsg -foregroundcolor Red
}

function PrintSuccess($strMsg)
{
    Write-Host $strMsg -foregroundcolor Green
}

function PrintAction($strMsg)
{
    Write-Host $strMsg -ForegroundColor Cyan
}


# Cleans up and prints an error message
function CleanupAndFail($strMsg)
{
    if ($strMsg)
    {
        PrintError($strMsg);
    }
    Cleanup
    exit 1
}

# Exits if there is an error set and prints the given message
function ExitIfError($strMsg)
{
    if ($Error)
    {
        CleanupAndFail($strMsg);
    }
}


## Check dependencies ##
try {
    Import-Module SkypeOnlineConnector
    Import-Module MSOnline
}
catch
{
    PrintError "Some dependencies are missing"
    PrintError "Please install the Windows PowerShell Module for Lync Online. For more information go to https://www.microsoft.com/download/details.aspx?id=39366"
    PrintError "Please install the Azure Active Directory module for PowerShell from https://go.microsoft.com/fwlink/p/?linkid=236297"
    CleanupAndFail
}



## Collect account data ##
$credNewAccount = (Get-Credential -Message "Enter the desired UPN and password for this new account")
$strUpn = $credNewAccount.UserName
$strDisplayName = Read-Host "Please enter the display name you would like to use for $strUpn"
if (!$credNewAccount -Or [System.String]::IsNullOrEmpty($strDisplayName) -Or [System.String]::IsNullOrEmpty($credNewAccount.UserName) -Or $credNewAccount.Password.Length -le 0)
{
    CleanupAndFail "Please enter all of the requested data to continue."
    exit 1
}


## Sign in to remote powershell for exchange and lync online ##
$credAdmin = $null
$credAdmin=Get-Credential -Message "Enter credentials of an Exchange and Skype for Business admin"
if (!$credadmin)
{
    CleanupAndFail "Valid admin credentials are required to create and prepare the account."
}
PrintAction "Connecting to remote sessions. This can occasionally take a while - please do not enter input..."
try
{
    $sessExchange = New-PSSession -ConfigurationName microsoft.exchange -Credential $credAdmin -AllowRedirection -Authentication basic -ConnectionUri "https://outlook.office365.com/powershell-liveid/" -WarningAction SilentlyContinue
}
catch
{
    CleanupAndFail "Failed to connect to exchange. Please check your credentials and try again. Error message: $_"
}

try
{
    $sessCS = New-CsOnlineSession -Credential $credAdmin
}
catch
{
    CleanupAndFail "Failed to connect to Skype for Business Online Datacenter. Please check your credentials and try again. Error message: $_"
}

try
{
    Connect-MsolService -Credential $credAdmin
}
catch
{
    CleanupAndFail "Failed to connect to Azure Active Directory. Please check your credentials and try again. Error message: $_"
}

Import-PSSession $sessExchange -AllowClobber -WarningAction SilentlyContinue
Import-PSSession $sessCS -AllowClobber -WarningAction SilentlyContinue

## Create the Exchange mailbox ##
> [!Note]
> These exchange commandlets do not always throw their errors as exceptions

# Because Get-Mailbox throws an error if the mailbox isn't found
$Error.Clear()
PrintAction "Creating a new account..."
try
{
    $mailbox = $null
    $mailbox = (New-Mailbox -MicrosoftOnlineServicesID $credNewAccount.UserName -room -Name $strDisplayName -RoomMailboxPassword $credNewAccount.Password -EnableRoomMailboxAccount $true)
} catch { }
ExitIfError "Failed to create a new mailbox on exchange.";
$status["Mailbox Setup"] = "Successfully created a mailbox for the new account"


$strEmail = $mailbox.WindowsEmailAddress
PrintSuccess "The following mailbox has been created for this room: $strEmail"


## Create or retrieve a policy to be be applied to surface hub devices ##
# The policy disables requiring a device password so that the SurfaceHub does not need to be lockable to use Active Sync
$strPolicy = Read-Host 'Please enter the name for a new Surface Hub ActiveSync policy to be be created and applied to this account.
We will configure that policy to be compatible with Surface Hub devices.
If this script has been used before, please enter the name of the existing policy.'

$easpolicy = $null
try {
    $easpolicy = Get-MobileDeviceMailboxPolicy $strPolicy
}
catch {}

if ($easpolicy)
{
    if (!$easpolicy.PasswordEnabled -and ($easpolicy.AllowNonProvisionableDevices -eq $null -or $easpolicy.AllowNonProvisionableDevices ))
    {
        PrintSuccess "An existing policy has been found and will be applied to this account."
    }
    else
    {
        PrintError "The policy you provided is incompatible with the surface hub."
        $easpolicy = $null
        $status["ActiveSync Policy"] = "Failed to apply the EAS policy to the account because the policy was invalid."
    }
}
else
{
    $Error.Clear()
    PrintAction "Creating policy..."
    $easpolicy = New-MobileDeviceMailboxPolicy -Name $strPolicy -PasswordEnabled $false -AllowNonProvisionableDevices $true
    if ($easpolicy)
    {
        PrintSuccess "A new device policy has been created; you can use this same policy for all future Surface Hub device accounts."
    }
    else
    {
        PrintError "Could not create $strPolicy"
    }
}

if ($easpolicy)
{
    # Convert mailbox to user type so we can apply the policy (necessary)
    # Sometimes it takes a while for this change to take affect so we have some nasty retry loops
    $Error.Clear();
    try
    {
        Set-Mailbox $credNewAccount.UserName -Type Regular
    } catch {}
    if ($Error)
    {
        $Error.Clear()
        $status["Device Password Policy"] = "Failed to apply the EAS policy to the account."
        PrintError "Failed to convert to regular account"
    }
    else
    {
        # Loop until resource type goes away, up to 5 times
        for ($i = 0; $i -lt 5 -And (Get-Mailbox $credNewAccount.UserName).ResourceType; $i++)
        {
            Start-Sleep -s 5
        }
        # If the mailbox is still a Room we cannot apply the policy
        if (!((Get-Mailbox $credNewAccount.UserName).ResourceType))
        {
            $Error.Clear()
            # Set policy for account
            Set-CASMailbox $credNewAccount.UserName -ActiveSyncMailboxPolicy $strPolicy
            if (!$Error)
            {
                $status["Device Password Policy"] = "Successfully applied $strPolicy to the account"
            }
            else
            {
                $status["Device Password Policy"] = "Failed to apply the EAS policy to the account."
                PrintError "Failed to apply policy"
            }
            $Error.Clear()

            # Convert back to room mailbox
            Set-Mailbox $credNewAccount.UserName -Type Room
            # Loop until resource type goes back to room
            for ($i = 0; ($i -lt 5) -And ((Get-Mailbox $credNewAccount.UserName).ResourceType -ne "Room"); $i++)
            {
                Start-Sleep -s 5
            }
            if ((Get-Mailbox $credNewAccount.UserName).ResourceType -ne "Room")
            {
                # A failure to convert the mailbox back to a room is unfortunate but means the mailbox is unusable.
                $status["Mailbox Setup"] = "A mailbox was created but we could not set it to a room resource type."
            }
            else
            {
                Set-Mailbox $credNewAccount.UserName -RoomMailboxPassword $credNewAccount.Password -EnableRoomMailboxAccount $true
                if ($Error)
                {
                    $status["Mailbox Setup"] = "A room mailbox was created but we could not set its password."
                }
                $Error.Clear()
            }

        }
    }
}
else
{
    $status["Device Password Policy"] = "Failed to apply the EAS policy to the account."
    PrintError "Failed to obtain policy"
}
PrintSuccess "Account creation completed."

PrintAction "Setting calendar processing rules..."

$Error.Clear();
## Prepare the calendar for automatic meeting responses ##
try {
    Set-CalendarProcessing -Identity $credNewAccount.UserName -AutomateProcessing AutoAccept
} catch { }
if ($Error)
{
    $status["Calendar Acceptance"] = "Failed to configure the account to automatically accept/decline meeting requests"
}
else
{
    $status["Calendar Acceptance"] = "Successfully configured the account to automatically accept/decline meeting requests"
}


$Error.Clear()
try {
    Set-CalendarProcessing -Identity $credNewAccount.UserName -RemovePrivateProperty $false -AddOrganizerToSubject $false -AddAdditionalResponse $true -DeleteSubject $false -DeleteComments $false -AdditionalResponse "This is a Surface Hub room!"
} catch { }
if ($Error)
{
    $status["Calendar Response Configuration"] = "Failed to configure the account's response properties"
}
else
{
    $status["Calendar Response Configuration"] = "Successfully configured the account's response properties"
}

$Error.Clear()
## Configure the Account to not expire ##
PrintAction "Configuring password not to expire..."
try
{
    Set-MsolUser -UserPrincipalName $credNewAccount.UserName -PasswordNeverExpires $true
}
catch
{

}

if ($Error)
{
    $status["Password Expiration Policy"] = "Failed to set the password to never expire"
}
else
{
    $status["Password Expiration Policy"] = "Successfully set the password to never expire"
}

PrintSuccess "Completed Exchange configuration"

## Setup Skype for Business. This is somewhat optional and if it fails we SfbEnable can be used later ##
PrintAction "Configuring account for Skype for Business."

# Getting registrar pool
$strRegPool = $null
try {
    $strRegPool = (Get-CsTenant).TenantPoolExtension
}
catch {}
$Error.Clear()
if (![System.String]::IsNullOrEmpty($strRegPool))
{
    $strRegPool = $strRegPool.Substring($strRegPool[0].IndexOf(':') + 1)
}
<#
$strRegPoolEntry = Read-Host "Enter a Skype for Business Registrar Pool, or leave blank to use [$strRegPool]"
if (![System.String]::IsNullOrEmpty($strRegPoolEntry))
{
    $strRegPool = $strRegPoolEntry
}
#>

# Try to SfB-enable the account. Note that it may not work right away as the account needs to propagate to active directory
PrintAction "Enabling Skype for Business on $strRegPool"
Start-Sleep -s 10
$Error.Clear()
try {
    Enable-CsMeetingRoom -Identity $credNewAccount.UserName -RegistrarPool $strRegPool -SipAddressType EmailAddress
}
catch { }

if ($Error)
{
    $status["Skype for Business Account Setup"] = "Failed to setup the Skype for Business meeting room - you can run EnableSfb.ps1 to try again."
    $Error.Clear();
}
else
{
    $status["Skype for Business Account Setup"] = "Successfully enabled account as a Skype for Business meeting room"
}

## Now we need to assign a Skype for Business license to the account ##
# Assign a license to thes
$countryCode = (Get-CsTenant).CountryAbbreviation
$loc = Read-Host "Please enter the usage location for this device account (where the account is being used). This is a 2-character code that is used to assign licenses (e.g. $countryCode)"
try {
    $Error.Clear()
    Set-MsolUser -UserPrincipalName $credNewAccount.UserName -UsageLocation $loc
}
catch{}
if ($Error)
{
    $status["Office 365 License"] = "Failed to assign an Office 365 license to the account"
    $Error.Clear()
}
else
{
    PrintAction "We found the following licenses available for your tenant:"
    $skus = (Get-MsolAccountSku | Where-Object { !$_.AccountSkuID.Contains("INTUNE"); })
    $i = 1
    $skus | % {
     Write-Host -NoNewline $i
     Write-Host -NoNewLine ": AccountSKUID: "
     Write-Host -NoNewLine $_.AccountSkuid
     Write-Host -NoNewLine " Active Units: "
     Write-Host -NoNewLine $_.ActiveUnits
     Write-Host -NoNewLine " Consumed Units: "
     Write-Host $_.ConsumedUnits
     $i++
    }
    $iLicenseIndex = 0;
    do
    {
        $iLicenseIndex = Read-Host 'Choose the number for the SKU you want to pick'
    } while ($iLicenseIndex -lt 1 -or $iLicenseIndex -gt $skus.Length)
    $strLicenses = $skus[$iLicenseIndex - 1].AccountSkuId

    if (![System.String]::IsNullOrEmpty($strLicenses))
    {
        try
        {
            $Error.Clear()
            Set-MsolUserLicense -UserPrincipalName $credNewAccount.UserName -AddLicenses $strLicenses
        }
        catch
        {

        }
        if ($Error)
        {
            $Error.Clear()
            $status["Office 365 License"] = "Failed to add a license to the account. Make sure you have remaining licenses."
        }
        else
        {
            $status["Office 365 License"] = "Successfully added license to the account"
        }
    }
    else
    {
        $status["Office 365 License"] = "You opted not to install a license on this account"
    }
}


Write-Host

## Cleanup and print results ##
Cleanup
$strDisplay = $mailbox.DisplayName
$strUsr = $credNewAccount.UserName
PrintAction "Summary for creation of $strUsr ($strDisplay)"
if ($status.Count -gt 0)
{
    ForEach($k in $status.Keys)
    {
        $v = $status[$k]
        $color = "yellow"
        if ($v[0] -eq "S") { $color = "green" }
        elseif ($v[0] -eq "F")
        {
            $color = "red"
            $v += " Go to https://aka.ms/shubtshoot for help"
        }

        Write-Host -NoNewline $k -ForegroundColor $color
        Write-Host -NoNewline ": "
        Write-Host $v
    }
}
else
{
    PrintError "The account could not be created"
}

Script di verifica degli account

Questo script pass/fail convalida l'account del dispositivo creato in precedenza in Surface Hub e Surface Hub 2S e genera un report di riepilogo o un messaggio di errore dettagliato. Ad esempio:

15 tests executed
0 failures
2 warnings
15 passed

I dettagli delle impostazioni specifiche non vengono visualizzati.

# SHAccountValidate.ps1

$Error.Clear()
$ErrorActionPreference = "Stop"


# Cleans up set state such as remote powershell sessions
function Cleanup()
{
    if ($sessEx)
    {
        Remove-PSSession $sessEx
    }
    if ($sessSfb)
    {
        Remove-PSSession $sessSfb
    }
}

function PrintError($strMsg)
{
    Write-Host $strMsg -foregroundcolor "red"
}

function PrintSuccess($strMsg)
{
    Write-Host $strMsg -foregroundcolor "green"
}

function PrintAction($strMsg)
{
    Write-Host $strMsg -ForegroundColor Cyan
}


# Cleans up and prints an error message
function CleanupAndFail($strMsg)
{
    if ($strMsg)
    {
        PrintError($strMsg);
    }
    Cleanup
    exit 1
}

# Exits if there is an error set and prints the given message
function ExitIfError($strMsg)
{
    if ($Error)
    {
        CleanupAndFail($strMsg);
    }
}

$strUpn = Read-Host "What is the email address of the account you wish to validate?"
if (!$strUpn.Contains('@'))
{
    CleanupAndFail "$strUpn isn't a valid email address"
}
$strExServer = Read-Host "What is your exchange server? (leave blank for online tenants)"
if ($strExServer.Equals(""))
{
    $fExIsOnline = $true
}
else
{
    $fExIsOnline = $false
}
$credEx = Get-Credential -Message "Please provide exchange user credentials"

$strRegistrarPool = Read-Host ("What is the Skype for Business registrar pool for $strUpn" + "? (leave blank for online tenants)")
$fSfbIsOnline = $strRegistrarPool.Equals("")

$fHasOnPrem = $true
if ($fSfbIsOnline -and $fExIsOnline)
{
    do
    {
        $strHasOnPrem = (Read-Host "Do you have an on-premises Active Directory (Y/N) (No if your domain services are hosted entirely online)").ToUpper()
    } while ($strHasOnPrem -ne "Y" -and $strHasOnPrem -ne "N")
    $fHasOnPrem = $strHasOnPrem.Equals("Y")
}

$fHasOnline = $false
if ($fSfbIsOnline -or $fExIsOnline)
{
    $fHasOnline = $true
}

if ($fSfbIsOnline)
{
    try {
        Import-Module SkypeOnlineConnector
    }
    catch
    {
        CleanupAndFail "To verify Skype for Business in online tenants you need the Lync Online Connector module from https://www.microsoft.com/download/details.aspx?id=39366"
    }
}
else
{
    $credSfb = (Get-Credential -Message "Please enter Skype for Business admin credentials")
}

if ($fHasOnline)
{
    $credSfb = $credEx
    try {
        Import-Module MSOnline
    }
    catch
    {
        CleanupAndFail "To verify accounts in online tenants you need the Azure Active Directory module for PowerShell from https://go.microsoft.com/fwlink/p/?linkid=236297"
    }
}

PrintAction "Connecting to Exchange Powershell Session..."
[System.Management.Automation.Runspaces.AuthenticationMechanism] $authType = [System.Management.Automation.Runspaces.AuthenticationMechanism]::Kerberos
if ($fExIsOnline)
{
    $authType = [System.Management.Automation.Runspaces.AuthenticationMechanism]::Basic
}
try
{
    $sessEx = $null
    if ($fExIsOnline)
    {
        $sessEx = New-PSSession -ConfigurationName microsoft.exchange -Credential $credEx -AllowRedirection -Authentication $authType -ConnectionUri "https://outlook.office365.com/powershell-liveid/" -WarningAction SilentlyContinue
    }
    else
    {
        $sessEx = New-PSSession -ConfigurationName microsoft.exchange -Credential $credEx -AllowRedirection -Authentication $authType -ConnectionUri https://$strExServer/powershell -WarningAction SilentlyContinue
    }
}
catch
{
}

if (!$sessEx)
{
    CleanupAndFail "Connecting to Exchange Powershell failed, please validate your server is accessible and credentials are correct"
}

PrintSuccess "Connected to Exchange Powershell Session"

PrintAction "Connecting to Skype for Business Powershell Session..."

if ($fSfbIsOnline)
{
    $sessSfb = New-CsOnlineSession -Credential $credSfb
}
else
{
    $sessSfb = New-PSSession -Credential $credSfb -ConnectionURI "https://$strRegistrarPool/OcsPowershell" -AllowRedirection -WarningAction SilentlyContinue
}

if (!$sessSfb)
{
    CleanupAndFail "Connecting to Skype for Business Powershell failed, please validate your server is accessible and credentials are correct"
}

PrintSuccess "Connected to Skype for Business Powershell"

if ($fHasOnline)
{
    $credMsol = $null
    if ($fExIsOnline)
    {
        $credMsol = $credEx
    }
    elseif ($fSfbIsOnline)
    {
        $credMsol = $credSfb
    }
    else
    {
        CleanupAndFail "Internal error - could not determine MS Online credentials"
    }
    try
    {
        PrintAction "Connecting to Azure Active Directory Services..."
        Connect-MsolService -Credential $credMsol
        PrintSuccess "Connected to Azure Active Directory Services"
    }
    catch
    {
        # This really shouldn't happen unless there is a network error
        CleanupAndFail "Failed to connect to MSOnline"
    }
}


PrintAction "Importing remote sessions into the local session..."
try
{
    $importEx = Import-PSSession $sessEx -AllowClobber -WarningAction SilentlyContinue -DisableNameChecking
    $importSfb = Import-PSSession $sessSfb -AllowClobber -WarningAction SilentlyContinue -DisableNameChecking
}
catch
{
}
if (!$importEx -or !$importSfb)
{
    CleanupAndFail "Import failed"
}
PrintSuccess "Import successful"


$mailbox = $null
try
{
    $mailbox = Get-Mailbox -Identity $strUpn
}
catch
{
}

if (!$mailbox)
{
    CleanupAndFail "Account exists check failed. Unable to find the mailbox for $strUpn - please make sure the Exchange account exists on $strExServer"
}

$exchange = $null
if (!$fExIsOnline)
{
    $exchange = Get-ExchangeServer
    if (!$exchange -or !$exchange.IsE14OrLater)
    {
        CleanupAndFail "A compatible exchange server version was not found. Please use at least exchange 2010."
    }
}


$strAlias = $mailbox.UserPrincipalName
$strDisplayName = $mailbox.DisplayName

$strLinkedAccount = $strLinkedDomain = $strLinkedUser = $strLinkedServer = $null
$credLinkedDomain = $Null
if (!$fExIsOnline -and ![System.String]::IsNullOrEmpty($mailbox.LinkedMasterAccount) -and !$mailbox.LinkedMasterAccount.EndsWith("\SELF"))
{
    $strLinkedAccount = $mailbox.LinkedMasterAccount
    $strLinkedDomain = $strLinkedAccount.substring(0,$strLinkedAccount.IndexOf('\'))
    $strLinkedUser = $strLinkedAccount.substring($strLinkedAccount.IndexOf('\') + 1)
    $strLinkedServer = Read-Host "What is the domain controller for the $strLinkedDomain"
    $credLinkedDomain = (Get-Credential -Message "Please provide credentials for $strLinkedDomain")
}







Write-Host
Write-Host
Write-Host
PrintAction "Performing verification checks on $strDisplayName..."
$Global:iTotalFailures = 0
$global:iTotalWarnings = 0
$Global:iTotalPasses = 0

function Validate()
{
    Param(
        [string]$Test,
        [bool]  $Condition,
        [string]$FailureMsg,
        [switch]$WarningOnly
    )

    Write-Host -NoNewline -ForegroundColor White $Test.PadRight(100,'.')
    if ($Condition)
    {
        Write-Host -ForegroundColor Green "Passed"
        $global:iTotalPasses++
    }
    else
    {
        if ($WarningOnly)
        {
            Write-Host -ForegroundColor Yellow ("Warning: "+$FailureMsg)
            $global:iTotalWarnings++
        }
        else
        {
            Write-Host -ForegroundColor Red ("Failed: "+$FailureMsg)
            $global:iTotalFailures++
        }
    }
}

## Exchange ##

Validate -WarningOnly -Test "The mailbox $strUpn is enabled as a room account" -Condition ($mailbox.RoomMailboxAccountEnabled -eq $True) -FailureMsg "RoomMailboxEnabled - without a device account, the Surface Hub won't be able to use various key features."
$calendarProcessing = Get-CalendarProcessing -Identity $strUpn -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
Validate -Test "The mailbox $strUpn is configured to accept meeting requests" -Condition ($calendarProcessing -ne $null -and $calendarProcessing.AutomateProcessing -eq 'AutoAccept') -FailureMsg "AutomateProcessing - the Surface Hub won't be able to send mail or sync its calendar."
Validate -WarningOnly -Test "The mailbox $strUpn won't delete meeting comments" -Condition ($calendarProcessing -ne $null -and !$calendarProcessing.DeleteComments) -FailureMsg "DeleteComments - the Surface Hub may be missing some meeting information on the welcome screen and Skype."
Validate -WarningOnly -Test "The mailbox $strUpn keeps private meetings private" -Condition ($calendarProcessing -ne $null -and !$calendarProcessing.RemovePrivateProperty) -FailureMsg "RemovePrivateProperty - the Surface Hub will make show private meetings."
Validate -Test "The mailbox $strUpn keeps meeting subjects" -Condition ($calendarProcessing -ne $null -and !$calendarProcessing.DeleteSubject) -FailureMsg "DeleteSubject - the Surface Hub won't keep meeting subject information."
Validate -WarningOnly -Test "The mailbox $strUpn does not prepend meeting organizers to subjects" -Condition ($calendarProcessing -ne $null -and !$calendarProcessing.AddOrganizerToSubject) -FailureMsg "AddOrganizerToSubject - the Surface Hub won't display meeting subjects as intended."

if ($fExIsOnline)
{
    #No online specifics
}
else
{
    #No onprem specifics
}

#ActiveSync
$casMailbox = Get-Casmailbox $strUpn -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
Validate -Test "The mailbox $strUpn has a mailbox policy" -Condition ($casMailbox -ne $null) -FailureMsg "PasswordEnabled - unable to find policy - the Surface Hub won't be able to send mail or sync its calendar."
if ($casMailbox)
{
    $policy = $null
    if ($fExIsOnline -or $exchange.IsE15OrLater)
    {
        $strPolicy = $casMailbox.ActiveSyncMailboxPolicy
        $policy = Get-MobileDeviceMailboxPolicy -Identity $strPolicy -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
        Validate -Test "The policy $strPolicy does not require a device password" -Condition ($policy.PasswordEnabled -ne $True) -FailureMsg "PasswordEnabled - policy requires a device password - the Surface Hub won't be able to send mail or sync its calendar."
    }
    else
    {
        $strPolicy = $casMailbox.ActiveSyncMailboxPolicy
        $policy = Get-ActiveSyncMailboxPolicy -Identity $strPolicy -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
        Validate -Test "The policy $strPolicy does not require a device password" -Condition ($policy.PasswordEnabled -ne $True) -FailureMsg "PasswordEnabled - policy requires a device password - the Surface Hub won't be able to send mail or sync its calendar."
    }

    if ($policy -ne $null)
    {
        Validate -Test "The policy $strPolicy allows non-provisionable devices" -Condition ($policy.AllowNonProvisionableDevices -eq $null -or $policy.AllowNonProvisionableDevices -eq $true) -FailureMsg "AllowNonProvisionableDevices - policy won't allow the SurfaceHub to sync"
    }

}


# Check the default access level
$orgSettings = Get-ActiveSyncOrganizationSettings
$strDefaultAccessLevel = $orgSettings.DefaultAccessLevel
Validate -Test "ActiveSync devices are allowed" -Condition ($strDefaultAccessLevel -eq 'Allow') -FailureMsg "DeviceType Windows Mail is accessible - devices are not allowed by default - the surface hub won't be able to send mail or sync its calendar."

# Check if there exists a device access rule that bans the device type Windows Mail
$blockingRules = Get-ActiveSyncDeviceAccessRule | where {($_.AccessLevel -eq 'Block' -or $_.AccessLevel -eq 'Quarantine') -and $_.Characteristic -eq 'DeviceType'-and $_.QueryString -eq 'WindowsMail'}
Validate -Test "Windows mail devices are not blocked or quarantined" -Condition ($blockingRules -eq $null -or $blockingRules.Length -eq 0) -FailureMsg "DeviceType Windows Mail is accessible - devices are blocked or quarantined - the surface hub won't be able to send mail or sync its calendar."

## End Exchange ##



## SfB ##
$strLyncIdentity = $null
if ($fSfbIsOnline)
{
    $strLyncIdentity = $strUpn
}
else
{
    $strLyncIdentity = $strAlias
}

$lyncAccount = $null
try {
    $lyncAccount = Get-CsMeetingRoom -Identity $strLyncIdentity -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
} catch {
    try {
        $lyncAccount = Get-CsUser -Identity $strLyncIdentity -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
    } catch { }
}
Validate -Test "There is a Lync or Skype for Business account for $strLyncIdentity" -Condition ($lyncAccount -ne $null -and $lyncAccount.Enabled) -FailureMsg "SfB Enabled - there is no Skype for Business account - meetings won't support Skype for Business"
if ($lyncAccount)
{
    Validate -Test "The meeting room has a SIP address" -Condition (![System.String]::IsNullOrEmpty($lyncAccount.SipAddress)) -FailureMsg "SfB Enabled - there is no SIP Address - the device account cannot be used to sign into Skype for Business."
}
## End SFB ##


if ($fHasOnline)
{
    #License validation and password expiry
    $accountOnline = Get-MsolUser -UserPrincipalName $strUpn -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
    Validate -Test "There is an online user account for $strUpn" -Condition ($accountOnline -ne $null) -FailureMsg "Could not find a Microsoft Online account for this user even though some services are online"
    if ($accountOnline)
    {
        Validate -Test "The password for $strUpn won't expire" -Condition ($accountOnline.PasswordNeverExpires -eq $True) -FailureMsg "PasswordNeverExpires - the admin needs to update the device account's password on the Surface Hub when it expires."
        if ($fIsSfbOnline -and !$fIsExOnline)
        {
            $strLicenseFailureMsg = "Has O365 license - The devices won't be able to use Skype for Business services."
        }
        elseif ($fIsExOnline -and !$fIsSfbOnline)
        {
            $strLicenseFailureMsg = "Has O365 license - The devices won't be able to use Exchange Online services."
        }
        else
        {
            $strLicenseFailureMsg = "Has O365 license - The devices won't be able to use Skype for Business or Exchange Online services."
        }
        Validate -Test "$strUpn is licensed" -Condition ($accountOnline.IsLicensed -eq $True) -FailureMsg $strLicenseFailureMsg

        Validate -Test "$strUpn is allowed to sign in" -Condition ($accountOnline.BlockCredential -ne $True) -FailureMsg "BlockCredential - This user isn't allowed to sign in."
    }
}

#If there is an on-premises component, we can get the authoritative AD user from mailbox
if ($fHasOnPrem)
{
    $accountOnPrem = $null
    if ($strLinkedAccount)
    {
        $accountOnPrem = Get-AdUser $strLinkedUser -server $strLinkedServer -credential $credLinkedDomain -properties PasswordNeverExpires -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
    }
    else
    {
        #AD User enabled validation
        $accountOnPrem = Get-AdUser $mailbox.UserPrincipalName -properties PasswordNeverExpires -WarningAction SilentlyContinue -ErrorAction SilentlyContinue
    }
    $strOnPremUpn = $accountOnPrem.UserPrincipalName
    Validate -Test "There is a user account for $strOnPremUpn" -Condition ($accountOnprem -ne $null) -FailureMsg "Could not find an Active Directory account for this user"
    if ($accountOnPrem)
    {
        Validate -WarningOnly -Test "The password for $strOnPremUpn won't expire" -Condition ($accountOnprem.PasswordNeverExpires -eq $True) -FailureMsg "PasswordNeverExpires - the admin needs to update the device account's password on the Surface Hub when it expires."
        Validate -Test "$strOnPremUpn is enabled" -Condition $accountOnPrem.Enabled -FailureMsg "AccountEnabled - this device account won't sign in"
    }
}


$global:iTotalTests = ($global:iTotalFailures + $global:iTotalPasses + $global:iTotalWarnings)

Write-Host -NoNewline $global:iTotalTests "tests executed: "
Write-Host -NoNewline -ForegroundColor Red $Global:iTotalFailures "failures "
Write-Host -NoNewline -ForegroundColor Yellow $Global:iTotalWarnings "warnings "
Write-Host -ForegroundColor Green $Global:iTotalPasses "passes "

Cleanup

Abilitare Skype for Business

Questo script abilita Skype for Business in un account del dispositivo. Usalo solo se Skype for Business non è stato precedentemente abilitato durante la creazione dell'account.

## This script performs only the Enable for Skype for Business step on an account. It should only be run if this step failed in SHAccountCreate and the other steps have been completed ##
# EnableSfb.ps1

$Error.Clear()
$ErrorActionPreference = "Stop"

# Cleans up set state such as remote powershell sessions
function Cleanup()
{
    if ($sessCS)
    {
        Remove-PSSession $sessCS
    }
}

function PrintError($strMsg)
{
    Write-Host $strMsg -foregroundcolor "red"
}

function PrintSuccess($strMsg)
{
    Write-Host $strMsg -foregroundcolor "green"
}

# Cleans up and prints an error message
function CleanupAndFail($strMsg)
{
    if ($strMsg)
    {
        PrintError($strMsg);
    }
    Cleanup
    exit 1
}

# Exits if there is an error set and prints the given message
function ExitIfError($strMsg)
{
    if ($Error)
    {
        CleanupAndFail($strMsg);
    }
}

## Check dependencies ##

$input = Read-Host "Is the account you wish to enable part of an online environment (enter O) or on-premises environment (enter P)"
if ($input -eq "P")
{
    $online = $false
}
elseif ($input -eq "O")
{
    $online = $true
}
else
{
    CleanupAndFail "Invalid selection"
}
if ($online)
{
    try {
        Import-Module SkypeOnlineConnector
    }
    catch
    {
        PrintError "Some dependencies are missing"
        PrintError "Please install the Windows PowerShell Module for Lync Online. For more information go to https://www.microsoft.com/download/details.aspx?id=39366"
        PrintError "Please install the Azure Active Directory module for PowerShell from https://go.microsoft.com/fwlink/p/?linkid=236297"
        CleanupAndFail
    }
}
else
{
    $strRegPool = Read-Host "Enter the FQDN of your Skype for Business Registrar Pool"
}


## Collect account data ##
Write-Host "-----------  Enter info for the account to enable  -----------." -foregroundcolor "magenta"
$strRoomUri=Read-Host 'Please enter the UPN of the account you are enabling (e.g. confroom@surfacehub.microsoft.com)'

if ([System.String]::IsNullOrEmpty($strRoomUri))
{
    CleanupAndFail "Please enter all of the requested data to continue."
    exit 1
}
Write-Host "--------------------------------------------------------------." -foregroundcolor "magenta"



## Sign in to remote powershell for exchange and lync online ##
Write-Host "`n------------------  Establishing connection  -----------------." -foregroundcolor "magenta"
$credAdmin=Get-Credential -Message "Enter credentials of a Skype for Business admin"
if (!$credadmin)
{
    CleanupAndFail("Valid admin credentials are required to create and prepare the account.");
}
Write-Host "Connecting to remote sessions. This can occasionally take a while - please do not enter input..."

try
{
    if ($online)
    {
        $sessCS = New-CsOnlineSession -Credential $credAdmin
    }
    else
    {
        $sessCS = New-PSSession -Credential $credAdmin -ConnectionURI "https://$strRegPool/OcsPowershell" -AllowRedirection -WarningAction SilentlyContinue
    }
}
catch
{
    CleanupAndFail("Failed to connect to Skype for Business server. Please check your credentials and try again. Error message: $_")
}

Import-PSSession $sessCS -AllowClobber


Write-Host "--------------------------------------------------------------." -foregroundcolor "magenta"

# Getting registrar pool
if ($online)
{
    try {
        $strRegPool = $null;
        $strRegPool = (Get-CsTenant).RegistrarPool
    } catch {}
    if ($Error)
    {
        $Error.Clear();
        $strRegPool = "";
        Write-Host "We failed to lookup your Skype for Business Registrar Pool, but you can still enter it manually"
    }
    else
    {
        $strRegPool = $strRegPool[0].Substring($strRegPool[0].IndexOf(':') + 1)
    }
}


$Error.Clear()
try {
    Enable-CsMeetingRoom -Identity $strRoomUri -RegistrarPool $strRegPool -SipAddressType EmailAddress
}
catch {}

ExitIfError("Failed to setup Skype for Business meeting room")

PrintSuccess "Successfully enabled $strRoomUri as a Skype for Business meeting room"

Cleanup

Cmdlet utili

Creazione di criteri di ActiveSync compatibili con Surface Hub

Per fare in modo che Surface Hub usi i servizi Exchange, nel dispositivo deve essere effettuato il provisioning di un account del dispositivo configurato con criteri ActiveSync compatibili. Questi criteri hanno i requisiti seguenti:

PasswordEnabled == 0

Nei cmdlet seguenti, $strPolicy è il nome del criterio di ActiveSync e $strRoomUpn è l'UPN dell'account del dispositivo a cui vuoi applicare il criterio.

Per eseguire i cmdlet, è necessario configurare una sessione remota di PowerShell e:

• Il tuo account amministratore deve essere abilitato per PowerShell remoto. Questa impostazione consente all'amministratore di usare i cmdlet di PowerShell necessari per lo script. (Questa autorizzazione può essere impostata tramite set-user $admin -RemotePowerShellEnabled $true)
• Se intendi eseguire gli script di creazione, il tuo account amministratore deve avere il ruolo "Reimposta password". Questo ruolo consente all'amministratore di modificare la password dell'account, necessaria per lo script. Il ruolo Reimposta password può essere abilitato tramite l'interfaccia di amministrazione di Exchange.

Crea il criterio.

# Create new policy with PasswordEnabled == false
New-MobileDeviceMailboxPolicy -Name $strPolicy -PasswordEnabled $false –AllowNonProvisionableDevices $true

Per applicare il criterio, la cassetta postale non può essere un tipo di sala, quindi deve essere prima convertita in un utente.

# Convert user to regular type
Set-Mailbox $strRoomUpn -Type Regular
# Set policy for account
Set-CASMailbox $strRoomUpn -ActiveSyncMailboxPolicy $strPolicy

A questo punto l'account del dispositivo deve semplicemente essere riconvertito in un tipo di sala.

# Convert back to room mailbox
Set-Mailbox $strRoomUpn -Type Room

Consentire ID di dispositivo per ActiveSync

Per consentire un account $strRoomUpn, esegui il comando seguente:

Set-CASMailbox –Identity $strRoomUpn –ActiveSyncAllowedDeviceIDs “<ID>”

Per trovare l'ID di un dispositivo, esegui:

Get-ActiveSyncDevice -Mailbox $strRoomUpn

Questo comando recupera le informazioni sul dispositivo per ogni dispositivo in cui è stato effettuato il provisioning dell'account, inclusa la DeviceId proprietà .

Accettazione e rifiuto automatici delle convocazioni riunione

Per fare in modo che un account del dispositivo accetti o rifiuti automaticamente le convocazioni riunione in base alla disponibilità, l'attributo AutomateProcessing deve essere impostato su AutoAccept. Questo attributo è consigliato per evitare la sovrapposizione di riunioni.

Set-CalendarProcessing $strRoomUpn -AutomateProcessing AutoAccept

Accettazione di convocazioni riunione esterne

Per fare in modo che un account del dispositivo accetti le convocazioni riunione esterne (una convocazione riunione proveniente da un account di un altro tenant/dominio), l'account del dispositivo deve essere impostato per consentire l'elaborazione delle convocazioni riunione esterne. Una volta impostato, l'account del dispositivo accetta o rifiuta automaticamente le convocazioni di riunione da account esterni e account locali.

Nota

Se l'attributo AutomateProcessing non è impostato su AutoAccept, l'impostazione non ha alcun effetto.

Set-CalendarProcessing $strRoomUpn -ProcessExternalMeetingMessages $true