DictionaryBase Classe
Definizione
Importante
Alcune informazioni sono relative alla release non definitiva del prodotto, che potrebbe subire modifiche significative prima della release definitiva. Microsoft non riconosce alcuna garanzia, espressa o implicita, in merito alle informazioni qui fornite.
Fornisce la abstract classe base per una raccolta fortemente tipizzata di coppie chiave/valore.
public ref class DictionaryBase abstract : System::Collections::IDictionary
public abstract class DictionaryBase : System.Collections.IDictionary
[System.Serializable]
public abstract class DictionaryBase : System.Collections.IDictionary
[System.Serializable]
[System.Runtime.InteropServices.ComVisible(true)]
public abstract class DictionaryBase : System.Collections.IDictionary
type DictionaryBase = class
interface ICollection
interface IEnumerable
interface IDictionary
[<System.Serializable>]
type DictionaryBase = class
interface IDictionary
interface ICollection
interface IEnumerable
[<System.Serializable>]
[<System.Runtime.InteropServices.ComVisible(true)>]
type DictionaryBase = class
interface IDictionary
interface ICollection
interface IEnumerable
Public MustInherit Class DictionaryBase
Implements IDictionary
- Ereditarietà
-
DictionaryBase
- Derivato
- Attributi
- Implementazioni
Esempio
L'esempio di codice seguente implementa la classe e usa tale DictionaryBase implementazione per creare un dizionario di chiavi e valori con un String massimo di Length 5 caratteri.
using System;
using System.Collections;
public class ShortStringDictionary : DictionaryBase {
public String this[ String key ] {
get {
return( (String) Dictionary[key] );
}
set {
Dictionary[key] = value;
}
}
public ICollection Keys {
get {
return( Dictionary.Keys );
}
}
public ICollection Values {
get {
return( Dictionary.Values );
}
}
public void Add( String key, String value ) {
Dictionary.Add( key, value );
}
public bool Contains( String key ) {
return( Dictionary.Contains( key ) );
}
public void Remove( String key ) {
Dictionary.Remove( key );
}
protected override void OnInsert( Object key, Object value ) {
if ( key.GetType() != typeof(System.String) )
{
throw new ArgumentException( "key must be of type String.", "key" );
}
else {
String strKey = (String) key;
if ( strKey.Length > 5 )
throw new ArgumentException( "key must be no more than 5 characters in length.", "key" );
}
if ( value.GetType() != typeof(System.String) )
{
throw new ArgumentException( "value must be of type String.", "value" );
}
else {
String strValue = (String) value;
if ( strValue.Length > 5 )
throw new ArgumentException( "value must be no more than 5 characters in length.", "value" );
}
}
protected override void OnRemove( Object key, Object value ) {
if ( key.GetType() != typeof(System.String) )
{
throw new ArgumentException( "key must be of type String.", "key" );
}
else {
String strKey = (String) key;
if ( strKey.Length > 5 )
throw new ArgumentException( "key must be no more than 5 characters in length.", "key" );
}
}
protected override void OnSet( Object key, Object oldValue, Object newValue ) {
if ( key.GetType() != typeof(System.String) )
{
throw new ArgumentException( "key must be of type String.", "key" );
}
else {
String strKey = (String) key;
if ( strKey.Length > 5 )
throw new ArgumentException( "key must be no more than 5 characters in length.", "key" );
}
if ( newValue.GetType() != typeof(System.String) )
{
throw new ArgumentException( "newValue must be of type String.", "newValue" );
}
else {
String strValue = (String) newValue;
if ( strValue.Length > 5 )
throw new ArgumentException( "newValue must be no more than 5 characters in length.", "newValue" );
}
}
protected override void OnValidate( Object key, Object value ) {
if ( key.GetType() != typeof(System.String) )
{
throw new ArgumentException( "key must be of type String.", "key" );
}
else {
String strKey = (String) key;
if ( strKey.Length > 5 )
throw new ArgumentException( "key must be no more than 5 characters in length.", "key" );
}
if ( value.GetType() != typeof(System.String) )
{
throw new ArgumentException( "value must be of type String.", "value" );
}
else {
String strValue = (String) value;
if ( strValue.Length > 5 )
throw new ArgumentException( "value must be no more than 5 characters in length.", "value" );
}
}
}
public class SamplesDictionaryBase {
public static void Main() {
// Creates and initializes a new DictionaryBase.
ShortStringDictionary mySSC = new ShortStringDictionary();
// Adds elements to the collection.
mySSC.Add( "One", "a" );
mySSC.Add( "Two", "ab" );
mySSC.Add( "Three", "abc" );
mySSC.Add( "Four", "abcd" );
mySSC.Add( "Five", "abcde" );
// Display the contents of the collection using foreach. This is the preferred method.
Console.WriteLine( "Contents of the collection (using foreach):" );
PrintKeysAndValues1( mySSC );
// Display the contents of the collection using the enumerator.
Console.WriteLine( "Contents of the collection (using enumerator):" );
PrintKeysAndValues2( mySSC );
// Display the contents of the collection using the Keys property and the Item property.
Console.WriteLine( "Initial contents of the collection (using Keys and Item):" );
PrintKeysAndValues3( mySSC );
// Tries to add a value that is too long.
try {
mySSC.Add( "Ten", "abcdefghij" );
}
catch ( ArgumentException e ) {
Console.WriteLine( e.ToString() );
}
// Tries to add a key that is too long.
try {
mySSC.Add( "Eleven", "ijk" );
}
catch ( ArgumentException e ) {
Console.WriteLine( e.ToString() );
}
Console.WriteLine();
// Searches the collection with Contains.
Console.WriteLine( "Contains \"Three\": {0}", mySSC.Contains( "Three" ) );
Console.WriteLine( "Contains \"Twelve\": {0}", mySSC.Contains( "Twelve" ) );
Console.WriteLine();
// Removes an element from the collection.
mySSC.Remove( "Two" );
// Displays the contents of the collection.
Console.WriteLine( "After removing \"Two\":" );
PrintKeysAndValues1( mySSC );
}
// Uses the foreach statement which hides the complexity of the enumerator.
// NOTE: The foreach statement is the preferred way of enumerating the contents of a collection.
public static void PrintKeysAndValues1( ShortStringDictionary myCol ) {
foreach ( DictionaryEntry myDE in myCol )
Console.WriteLine( " {0,-5} : {1}", myDE.Key, myDE.Value );
Console.WriteLine();
}
// Uses the enumerator.
// NOTE: The foreach statement is the preferred way of enumerating the contents of a collection.
public static void PrintKeysAndValues2( ShortStringDictionary myCol ) {
DictionaryEntry myDE;
System.Collections.IEnumerator myEnumerator = myCol.GetEnumerator();
while ( myEnumerator.MoveNext() )
if ( myEnumerator.Current != null ) {
myDE = (DictionaryEntry) myEnumerator.Current;
Console.WriteLine( " {0,-5} : {1}", myDE.Key, myDE.Value );
}
Console.WriteLine();
}
// Uses the Keys property and the Item property.
public static void PrintKeysAndValues3( ShortStringDictionary myCol ) {
ICollection myKeys = myCol.Keys;
foreach ( String k in myKeys )
Console.WriteLine( " {0,-5} : {1}", k, myCol[k] );
Console.WriteLine();
}
}
/*
This code produces the following output.
Contents of the collection (using foreach):
Three : abc
Five : abcde
Two : ab
One : a
Four : abcd
Contents of the collection (using enumerator):
Three : abc
Five : abcde
Two : ab
One : a
Four : abcd
Initial contents of the collection (using Keys and Item):
Three : abc
Five : abcde
Two : ab
One : a
Four : abcd
System.ArgumentException: value must be no more than 5 characters in length.
Parameter name: value
at ShortStringDictionary.OnValidate(Object key, Object value)
at System.Collections.DictionaryBase.System.Collections.IDictionary.Add(Object key, Object value)
at SamplesDictionaryBase.Main()
System.ArgumentException: key must be no more than 5 characters in length.
Parameter name: key
at ShortStringDictionary.OnValidate(Object key, Object value)
at System.Collections.DictionaryBase.System.Collections.IDictionary.Add(Object key, Object value)
at SamplesDictionaryBase.Main()
Contains "Three": True
Contains "Twelve": False
After removing "Two":
Three : abc
Five : abcde
One : a
Four : abcd
*/
Imports System.Collections
Public Class ShortStringDictionary
Inherits DictionaryBase
Default Public Property Item(key As String) As String
Get
Return CType(Dictionary(key), String)
End Get
Set
Dictionary(key) = value
End Set
End Property
Public ReadOnly Property Keys() As ICollection
Get
Return Dictionary.Keys
End Get
End Property
Public ReadOnly Property Values() As ICollection
Get
Return Dictionary.Values
End Get
End Property
Public Sub Add(key As String, value As String)
Dictionary.Add(key, value)
End Sub
Public Function Contains(key As String) As Boolean
Return Dictionary.Contains(key)
End Function 'Contains
Public Sub Remove(key As String)
Dictionary.Remove(key)
End Sub
Protected Overrides Sub OnInsert(key As Object, value As Object)
If Not GetType(System.String).IsAssignableFrom(key.GetType()) Then
Throw New ArgumentException("key must be of type String.", "key")
Else
Dim strKey As String = CType(key, String)
If strKey.Length > 5 Then
Throw New ArgumentException("key must be no more than 5 characters in length.", "key")
End If
End If
If Not GetType(System.String).IsAssignableFrom(value.GetType()) Then
Throw New ArgumentException("value must be of type String.", "value")
Else
Dim strValue As String = CType(value, String)
If strValue.Length > 5 Then
Throw New ArgumentException("value must be no more than 5 characters in length.", "value")
End If
End If
End Sub
Protected Overrides Sub OnRemove(key As Object, value As Object)
If Not GetType(System.String).IsAssignableFrom(key.GetType()) Then
Throw New ArgumentException("key must be of type String.", "key")
Else
Dim strKey As String = CType(key, String)
If strKey.Length > 5 Then
Throw New ArgumentException("key must be no more than 5 characters in length.", "key")
End If
End If
End Sub
Protected Overrides Sub OnSet(key As Object, oldValue As Object, newValue As Object)
If Not GetType(System.String).IsAssignableFrom(key.GetType()) Then
Throw New ArgumentException("key must be of type String.", "key")
Else
Dim strKey As String = CType(key, String)
If strKey.Length > 5 Then
Throw New ArgumentException("key must be no more than 5 characters in length.", "key")
End If
End If
If Not GetType(System.String).IsAssignableFrom(newValue.GetType()) Then
Throw New ArgumentException("newValue must be of type String.", "newValue")
Else
Dim strValue As String = CType(newValue, String)
If strValue.Length > 5 Then
Throw New ArgumentException("newValue must be no more than 5 characters in length.", "newValue")
End If
End If
End Sub
Protected Overrides Sub OnValidate(key As Object, value As Object)
If Not GetType(System.String).IsAssignableFrom(key.GetType()) Then
Throw New ArgumentException("key must be of type String.", "key")
Else
Dim strKey As String = CType(key, String)
If strKey.Length > 5 Then
Throw New ArgumentException("key must be no more than 5 characters in length.", "key")
End If
End If
If Not GetType(System.String).IsAssignableFrom(value.GetType()) Then
Throw New ArgumentException("value must be of type String.", "value")
Else
Dim strValue As String = CType(value, String)
If strValue.Length > 5 Then
Throw New ArgumentException("value must be no more than 5 characters in length.", "value")
End If
End If
End Sub
End Class
Public Class SamplesDictionaryBase
Public Shared Sub Main()
' Creates and initializes a new DictionaryBase.
Dim mySSC As New ShortStringDictionary()
' Adds elements to the collection.
mySSC.Add("One", "a")
mySSC.Add("Two", "ab")
mySSC.Add("Three", "abc")
mySSC.Add("Four", "abcd")
mySSC.Add("Five", "abcde")
' Display the contents of the collection using For Each. This is the preferred method.
Console.WriteLine("Contents of the collection (using For Each):")
PrintKeysAndValues1(mySSC)
' Display the contents of the collection using the enumerator.
Console.WriteLine("Contents of the collection (using enumerator):")
PrintKeysAndValues2(mySSC)
' Display the contents of the collection using the Keys property and the Item property.
Console.WriteLine("Initial contents of the collection (using Keys and Item):")
PrintKeysAndValues3(mySSC)
' Tries to add a value that is too long.
Try
mySSC.Add("Ten", "abcdefghij")
Catch e As ArgumentException
Console.WriteLine(e.ToString())
End Try
' Tries to add a key that is too long.
Try
mySSC.Add("Eleven", "ijk")
Catch e As ArgumentException
Console.WriteLine(e.ToString())
End Try
Console.WriteLine()
' Searches the collection with Contains.
Console.WriteLine("Contains ""Three"": {0}", mySSC.Contains("Three"))
Console.WriteLine("Contains ""Twelve"": {0}", mySSC.Contains("Twelve"))
Console.WriteLine()
' Removes an element from the collection.
mySSC.Remove("Two")
' Displays the contents of the collection.
Console.WriteLine("After removing ""Two"":")
PrintKeysAndValues1(mySSC)
End Sub
' Uses the For Each statement which hides the complexity of the enumerator.
' NOTE: The For Each statement is the preferred way of enumerating the contents of a collection.
Public Shared Sub PrintKeysAndValues1(myCol As ShortStringDictionary)
Dim myDE As DictionaryEntry
For Each myDE In myCol
Console.WriteLine(" {0,-5} : {1}", myDE.Key, myDE.Value)
Next myDE
Console.WriteLine()
End Sub
' Uses the enumerator.
' NOTE: The For Each statement is the preferred way of enumerating the contents of a collection.
Public Shared Sub PrintKeysAndValues2(myCol As ShortStringDictionary)
Dim myDE As DictionaryEntry
Dim myEnumerator As System.Collections.IEnumerator = myCol.GetEnumerator()
While myEnumerator.MoveNext()
If Not (myEnumerator.Current Is Nothing) Then
myDE = CType(myEnumerator.Current, DictionaryEntry)
Console.WriteLine(" {0,-5} : {1}", myDE.Key, myDE.Value)
End If
End While
Console.WriteLine()
End Sub
' Uses the Keys property and the Item property.
Public Shared Sub PrintKeysAndValues3(myCol As ShortStringDictionary)
Dim myKeys As ICollection = myCol.Keys
Dim k As String
For Each k In myKeys
Console.WriteLine(" {0,-5} : {1}", k, myCol(k))
Next k
Console.WriteLine()
End Sub
End Class
'This code produces the following output.
'
'Contents of the collection (using For Each):
' Three : abc
' Five : abcde
' Two : ab
' One : a
' Four : abcd
'
'Contents of the collection (using enumerator):
' Three : abc
' Five : abcde
' Two : ab
' One : a
' Four : abcd
'
'Initial contents of the collection (using Keys and Item):
' Three : abc
' Five : abcde
' Two : ab
' One : a
' Four : abcd
'
'System.ArgumentException: value must be no more than 5 characters in length.
'Parameter name: value
' at ShortStringDictionary.OnValidate(Object key, Object value)
' at System.Collections.DictionaryBase.System.Collections.IDictionary.Add(Object key, Object value)
' at SamplesDictionaryBase.Main()
'System.ArgumentException: key must be no more than 5 characters in length.
'Parameter name: key
' at ShortStringDictionary.OnValidate(Object key, Object value)
' at System.Collections.DictionaryBase.System.Collections.IDictionary.Add(Object key, Object value)
' at SamplesDictionaryBase.Main()
'
'Contains "Three": True
'Contains "Twelve": False
'
'After removing "Two":
' Three : abc
' Five : abcde
' One : a
' Four : abcd
Commenti
Importante
Non è consigliabile usare la DictionaryBase classe per il nuovo sviluppo. È invece consigliabile usare la classe generica Dictionary<TKey,TValue> o KeyedCollection<TKey,TItem> . Per altre informazioni, vedere Raccolte non generiche che non devono essere usate in GitHub.
L'istruzione C# foreach e l'istruzione Visual Basic For Each restituiscono un oggetto del tipo degli elementi nell'insieme. Poiché ogni elemento di DictionaryBase è una coppia chiave/valore, il tipo di elemento non è il tipo della chiave o il tipo del valore. Il tipo di elemento è DictionaryEntryinvece .
L'istruzione foreach è un wrapper intorno all'enumeratore, che consente solo la lettura, non la scrittura nella raccolta.
Note
Poiché le chiavi possono essere ereditate e il loro comportamento è cambiato, la loro univocità assoluta non può essere garantita dai confronti usando il Equals metodo .
Note per gli implementatori
Questa classe di base viene fornita per semplificare la creazione di una raccolta personalizzata fortemente tipizzata da parte degli implementatori. Gli implementatori sono invitati a estendere questa classe di base anziché crearne una propria.
I membri di questa classe di base sono protetti e devono essere usati solo tramite una classe derivata.
Costruttori
| Nome | Descrizione |
|---|---|
| DictionaryBase() |
Inizializza una nuova istanza della classe DictionaryBase. |
Proprietà
| Nome | Descrizione |
|---|---|
| Count |
Ottiene il numero di elementi contenuti nell'istanza DictionaryBase di . |
| Dictionary |
Ottiene l'elenco di elementi contenuti nell'istanza DictionaryBase di . |
| InnerHashtable |
Ottiene l'elenco di elementi contenuti nell'istanza DictionaryBase di . |
Metodi
| Nome | Descrizione |
|---|---|
| Clear() |
Cancella il contenuto dell'istanza DictionaryBase . |
| CopyTo(Array, Int32) |
Copia gli DictionaryBase elementi in unidimensionale Array in corrispondenza dell'indice specificato. |
| Equals(Object) |
Determina se l'oggetto specificato è uguale all'oggetto corrente. (Ereditato da Object) |
| GetEnumerator() |
Restituisce un oggetto IDictionaryEnumerator che scorre l'istanza DictionaryBase di . |
| GetHashCode() |
Funge da funzione hash predefinita. (Ereditato da Object) |
| GetType() |
Ottiene il Type dell'istanza corrente. (Ereditato da Object) |
| MemberwiseClone() |
Crea una copia superficiale del Objectcorrente. (Ereditato da Object) |
| OnClear() |
Esegue processi personalizzati aggiuntivi prima di cancellare il contenuto dell'istanza DictionaryBase . |
| OnClearComplete() |
Esegue processi personalizzati aggiuntivi dopo la cancellazione del contenuto dell'istanza DictionaryBase . |
| OnGet(Object, Object) |
Ottiene l'elemento con la chiave e il valore specificati nell'istanza DictionaryBase di . |
| OnInsert(Object, Object) |
Esegue processi personalizzati aggiuntivi prima di inserire un nuovo elemento nell'istanza DictionaryBase di . |
| OnInsertComplete(Object, Object) |
Esegue processi personalizzati aggiuntivi dopo l'inserimento di un nuovo elemento nell'istanza DictionaryBase di . |
| OnRemove(Object, Object) |
Esegue processi personalizzati aggiuntivi prima di rimuovere un elemento dall'istanza DictionaryBase di . |
| OnRemoveComplete(Object, Object) |
Esegue processi personalizzati aggiuntivi dopo la rimozione di un elemento dall'istanza DictionaryBase di . |
| OnSet(Object, Object, Object) |
Esegue processi personalizzati aggiuntivi prima di impostare un valore nell'istanza DictionaryBase di . |
| OnSetComplete(Object, Object, Object) |
Esegue processi personalizzati aggiuntivi dopo aver impostato un valore nell'istanza DictionaryBase di . |
| OnValidate(Object, Object) |
Esegue processi personalizzati aggiuntivi durante la convalida dell'elemento con la chiave e il valore specificati. |
| ToString() |
Restituisce una stringa che rappresenta l'oggetto corrente. (Ereditato da Object) |
Implementazioni dell'interfaccia esplicita
| Nome | Descrizione |
|---|---|
| ICollection.IsSynchronized |
Ottiene un valore che indica se l'accesso a un DictionaryBase oggetto è sincronizzato (thread-safe). |
| ICollection.SyncRoot |
Ottiene un oggetto che può essere utilizzato per sincronizzare l'accesso a un DictionaryBase oggetto . |
| IDictionary.Add(Object, Object) |
Aggiunge un elemento con la chiave e il valore specificati in DictionaryBase. |
| IDictionary.Contains(Object) |
Determina se il DictionaryBase contiene una chiave specifica. |
| IDictionary.IsFixedSize |
Ottiene un valore che indica se un DictionaryBase oggetto ha una dimensione fissa. |
| IDictionary.IsReadOnly |
Ottiene un valore che indica se un DictionaryBase oggetto è di sola lettura. |
| IDictionary.Item[Object] |
Ottiene o imposta il valore associato alla chiave specificata. |
| IDictionary.Keys |
Ottiene un ICollection oggetto contenente le chiavi nell'oggetto DictionaryBase . |
| IDictionary.Remove(Object) |
Rimuove l'elemento con la chiave specificata da DictionaryBase. |
| IDictionary.Values |
Ottiene un ICollection oggetto contenente i valori nell'oggetto DictionaryBase . |
| IEnumerable.GetEnumerator() |
Restituisce un oggetto IEnumerator che scorre l'oggetto DictionaryBase. |
Metodi di estensione
| Nome | Descrizione |
|---|---|
| AsParallel(IEnumerable) |
Abilita la parallelizzazione di una query. |
| AsQueryable(IEnumerable) |
Converte un IEnumerable in un IQueryable. |
| Cast<TResult>(IEnumerable) |
Esegue il cast degli elementi di un IEnumerable al tipo specificato. |
| OfType<TResult>(IEnumerable) |
Filtra gli elementi di un IEnumerable in base a un tipo specificato. |
Si applica a
Thread safety
I membri statici pubblici (Shared in Visual Basic) di questo tipo sono thread-safe. Non è garantito che tutti i membri dell'istanza siano thread-safe.
Questa implementazione non fornisce un wrapper sincronizzato (thread-safe) per un DictionaryBaseoggetto , ma le classi derivate possono creare versioni sincronizzate dell'oggetto DictionaryBase usando la SyncRoot proprietà .
L'enumerazione tramite una raccolta non è intrinsecamente una procedura thread-safe. Anche quando una raccolta viene sincronizzata, altri thread possono comunque modificare la raccolta, causando la generazione di un'eccezione da parte dell'enumeratore. Per garantire la thread safety durante l'enumerazione, è possibile bloccare la raccolta durante l'intera enumerazione o intercettare le eccezioni risultanti dalle modifiche apportate da altri thread.