Add-DfsrConnection
Add-DfsrConnection
Creates a connection between members of a replication group.
Sintassi
Parameter Set: Default
Add-DfsrConnection [-GroupName] <String[]> [-SourceComputerName] <String> [-DestinationComputerName] <String> [[-DisableConnection]] [[-DisableRDC]] [[-DisableCrossFileRDC]] [[-Description] <String> ] [[-MinimumRDCFileSizeInKB] <Int64> ] [[-CreateOneWay]] [[-DomainName] <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Descrizione dettagliata
The Add-DfsrConnection cmdlet creates a connection between members of a replication group.
DFS Replication connections are the logical partnerships between members in a replication group. The DFS Replication service uses the Remote Procedure Call (RPC) protocol to communicate between servers. You must create a connection between a pair of computers before the DFS Replication service can initiate replication. You should always create connections bidirectionally between two servers, even if you are using read-only replication. The exception to this case is if you create a ring topology between three or more servers, where all members transitively replicate to all partners, and where all servers are hosting only writable replicated folders.
This cmdlet does not support modifying connection bandwidth or schedules, which typically do not require changes.
Parametri
-CreateOneWay
Specifies that the DFSR service does not create a matching connection in the opposite direction between the two computers.
You do not typically need to specify this parameter. DFS Replication requires a fully-connected replication topology, which means that all servers have both an inbound and outbound connection between each of its direct partners, or through transitive replication. This is required even when you specify read-only replication by using the Set-DfsrMembership cmdlet and setting the ReadOnly parameter to $True.
Alias |
nessuno |
Obbligatorio? |
false |
Posizione? |
9 |
Valore predefinito |
nessuno |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-Description<String>
Specifies a description for the connection.
Alias |
nessuno |
Obbligatorio? |
false |
Posizione? |
7 |
Valore predefinito |
nessuno |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-DestinationComputerName<String>
Specifies the name of the receiving computer. A receiving computer is also called an inbound or downstream computer.
Alias |
ReceivingMember,RMem |
Obbligatorio? |
true |
Posizione? |
3 |
Valore predefinito |
nessuno |
Accetta input da pipeline? |
True (ByPropertyName) |
Accetta caratteri jolly? |
false |
-DisableConnection
Specifies that the DFSR service disables the connection.
You do not typically need to disable a connection. Specify this parameter to temporarily pause replication. You can also use the Suspend-DfsReplicationGroup cmdlet to halt replication between computers. You must enable a connection between the computers before the DFS Replication service can initiate replication.
Important: Specify this parameter instead of disabling a computer's membership in the replication group by using the Set-DfsrMembership cmdlet. Disabling and enabling a computer's membership will cause non-authoritative inbound replication.
Alias |
nessuno |
Obbligatorio? |
false |
Posizione? |
4 |
Valore predefinito |
false |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-DisableCrossFileRDC
Indicates that the DFSR service disables the cross-file similarity Remote Differential Compression (RDC) algorithm on this connection.
Cross-file RDC uses up to five existing previously replicated files on a volume to seed a new replicating file. Applying cross-file RDC over very low-bandwidth network connections with files that are very similar results in very large bandwidth savings and potentially large time savings. When you use cross-file RDC on very high-bandwidth network connections, cross-file RDC may add too much local processing time and negatively affect performance. In extremely large datasets (millions of files on a volume with a great deal of similarity), cross-file RDC may also negatively affect CPU and disk utilization. Consider disabling cross-file RDC during initial synchronization when you replicate over LANs and very high performance WANs. This setting is only supported on Windows Server 2012 R2 and later.
Alias |
nessuno |
Obbligatorio? |
false |
Posizione? |
6 |
Valore predefinito |
nessuno |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-DisableRDC
Indicates that the DFS Replication service creates the connection with Remote Differential Compression (RDC) disabled.
You do not typically need to specify this parameter when you use lower bandwidth, higher latency connections. Consider specifying this parameter if the connection is over a LAN or very high performance WAN connection. By default, RDC is enabled on DFS Replication connections.
Alias |
nessuno |
Obbligatorio? |
false |
Posizione? |
5 |
Valore predefinito |
false |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-DomainName<String>
Specifies the NetBIOS name or fully qualified domain name (FQDN) for the Active Directory Domain Service (AD DS) domain that contains the replication group. If you do not specify this parameter, the cmdlet uses the domain of the current user.
Alias |
nessuno |
Obbligatorio? |
false |
Posizione? |
101 |
Valore predefinito |
[Current Domain] |
Accetta input da pipeline? |
True (ByPropertyName) |
Accetta caratteri jolly? |
false |
-GroupName<String[]>
Specifies an array of names of replication groups. You can use a comma separated list and the wildcard character (*).
Alias |
RG,RgName |
Obbligatorio? |
true |
Posizione? |
1 |
Valore predefinito |
nessuno |
Accetta input da pipeline? |
True (ByValue, ByPropertyName) |
Accetta caratteri jolly? |
true |
-MinimumRDCFileSizeInKB<Int64>
Specifies the file size threshold, in kilobytes, for RDC to apply.
You do not typically need to specify this parameter when you use lower bandwidth/higher latency connections. Consider specifying this parameter only if the connection is over a LAN or a very high performance WAN connection. By default, any files equal to or greater than 64KB are chunked by RDC.
Alias |
nessuno |
Obbligatorio? |
false |
Posizione? |
8 |
Valore predefinito |
64 |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-SourceComputerName<String>
Specifies the name of the sending computer. A sending computer is also called an outbound or upstream computer.
Alias |
SendingMember,SMem |
Obbligatorio? |
true |
Posizione? |
2 |
Valore predefinito |
nessuno |
Accetta input da pipeline? |
True (ByPropertyName) |
Accetta caratteri jolly? |
false |
-Confirm
Richiede conferma prima di eseguire il cmdlet.
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
False |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
-WhatIf
Mostra gli effetti dell'esecuzione del cmdlet. Il cmdlet non viene eseguito.
Obbligatorio? |
false |
Posizione? |
named |
Valore predefinito |
False |
Accetta input da pipeline? |
false |
Accetta caratteri jolly? |
false |
<CommonParameters>
Questo cmdlet supporta i parametri comuni: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer e -OutVariable. Per altre informazioni, vedere about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Input
Il tipo di input è il tipo degli oggetti che è possibile reindirizzare al cmdlet.
- Microsoft.DistributedFileSystemReplication.DfsReplicationGroup
Output
Il tipo di output corrisponde al tipo di oggetti generati dal cmdlet.
- Microsoft.DistributedFileSystemReplication.DfsrConnection
Esempi
Example 1: Create a bidirectional connection between members of a replication group
This command creates a bidirectional replication connection between the computer named SRV01 and the computer named SRV02 in the replication group named RG24.
PS C:\> Add-DfsrConnection -GroupName "RG24" -SourceComputerName "SRV01" -DestinationComputerName "SRV02"
Example 2: Create a one-way connection between members of a replication group
This command creates a one-way replication connection from computer named SRV02 to the computer named SRV01 in the replication group named RG24. To create a one-way replication connection, you must run the cmdlet once in each direction between members of the replication group. DFS Replication supports one-way connections only for a ring topology configuration on three or more servers.
PS C:\> Add-DfsrConnection -GroupName "RG24" -SourceComputerName SRV02 -DestinationComputerName "SRV01" -CreateOneWay
Example 3: Create a data distribution replication topology
This example creates a hub and spoke data distribution replication topology.
The first command uses the New-DfsReplicationGroup cmdlet to create a replication group object named Branch Office 1, and passes the object to the New-DfsReplicatedFolder cmdlet by using the pipe operator. The New-DfsReplicatedFolder cmdlet creates a replication folder object named Data Distribution 1, and passes the object to the Add-DfsrMember cmdlet by using the pipe operator. The Add-DfsrMember cmdlet adds the computers named SRV01, SRV02, and SRV03 to the replication group named Branch Office 1.
PS C:\> New-DfsReplicationGroup -GroupName "Branch Office 1" | New-DfsReplicatedFolder -FolderName "Data Distribution 1" | Add-DfsrMember -ComputerName "SRV01","SRV02","SRV03" | Format-Table dnsname,groupname -auto -wrap
The second command creates a bidirectional replication connection between the computer named SRV01 and the computer named SRV02 in the replication group named Branch Office 1.
PS C:\> Add-DfsrConnection -GroupName "Branch Office 1" -SourceComputerName SRV01 -DestinationComputerName SRV02 | Format-Table *name -wrap -auto
The third command creates a bidirectional replication connection between the computer named SRV01 and the computer named SRV03 in the replication group named Branch Office 1.
PS C:\> Add-DfsrConnection -GroupName "Branch Office 1" -SourceComputerName SRV01 -DestinationComputerName SRV03 | Format-Table *name -wrap -auto
The fourth command uses the Set-DfsrMembership cmdlet to configure membership settings for the primary member of the replication group named Branch Office 1. The command specifies that the computer named SRV01 is the primary member of the group. The command sets an appropriate quota size of the staging folder instead of the lower default.
PS C:\> Set-DfsrMembership -GroupName "Branch Office 1" -FolderName "Data Distribution 1" -ContentPath c:\rf1 -ComputerName SRV01 -PrimaryMember $True -StagingPathQuotaInMB 16384 -Force | Format-Table *name,*path,primary* -auto -wrap
The last command uses the Set-DfsrMembership cmdlet to configure membership settings for the members of the replication group named Branch Office 1. The command specifies that the computers named SRV02 and SRV03 are members of the group. The command sets an appropriate quota size of the staging folder instead of the lower default.
PS C:\> Set-DfsrMembership -GroupName "Branch Office 1" -FolderName "Data Distribution 1" -ContentPath c:\rf1 -ComputerName SRV02,SRV03 -StagingPathQuotaInMB 16384 -Force | Format-Table *name,*path,primary* -auto -wrap