Set-DfsrServiceConfiguration

Set-DfsrServiceConfiguration

Modifies settings for the DFS Replication service.

Sintassi

Parameter Set: Default
Set-DfsrServiceConfiguration [[-ComputerName] <String[]> ] [[-RPCPort] <UInt32> ] [[-DisableDebugLog] <Boolean> ] [[-MaximumDebugLogFiles] <UInt32> ] [[-DebugLogPath] <String> ] [[-DebugLogSeverity] <UInt32> ] [[-MaximumDebugLogMessages] <UInt32> ] [[-UnexpectedAutoRecovery] <Boolean> ] [[-CleanupStagingFolderAtPercent] <UInt32> ] [[-CleanupStagingFolderUntilPercent] <UInt32> ] [[-CleanupConflictFolderAtPercent] <UInt32> ] [[-CleanupConflictFolderUntilPercent] <UInt32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Descrizione dettagliata

The Set-DfsrServiceConfiguration cmdlet modifies settings for the Distributed File System (DFS) Replication service on replication group members. Members of a replication group host replicated folders. Use this cmdlet to configure cleanup settings, debug logging settings, and automatic recovery for unexpected shut down.

DFS Replication stores files in a folder named ConflictsAndDeleted until it deletes them for space. DFS Replication can stage files in a staging folder. In both cases, you can set a maximum folder size, called a quota, by using the Set-DfsrMembership cmdlet. Use the current cmdlet to set the percent of the quota used to start and stop deletion of older files.

By default, DFS Replication enables debug logging. You can disable logging. You can also change the number of lines written to each log file, the severity of messages written to log files, the number of log files to keep, and the location to store log files.

Parametri

-CleanupConflictFolderAtPercent<UInt32>

Specifies a percent value from 80 to 100. The default value is 90.

When the ConflictsAndDeleted folder size reaches this percent of the ConflictsAndDeleted quota, the DFS Replication service deletes the oldest files until the folder size falls below a set percent of the quota. You can specify that percent value by using the CleanupConflictFolderUntilPercent parameter.

Alias	nessuno
Obbligatorio?	false
Posizione?	11
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-CleanupConflictFolderUntilPercent<UInt32>

Specifies a percent value from 10 to 100. The default value is 60.

After the DFS Replication service starts cleanup of the ConflictsAndDeleted folder, it continues to delete the oldest files until the folder size reaches this percent of the ConflictsAndDeleted quota.

Alias	nessuno
Obbligatorio?	false
Posizione?	12
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-CleanupStagingFolderAtPercent<UInt32>

Specifies a percent value from 80 to 100. The default value is 90.

When the staging folder size reaches this percent of the staging folder quota, the DFS Replication service deletes the oldest files until the folder size falls below a set percent of the quota. You can specify that percent value by using the CleanupStagingFolderUntilPercent parameter.

Alias	nessuno
Obbligatorio?	false
Posizione?	9
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-CleanupStagingFolderUntilPercent<UInt32>

Specifies a percent value from 10 to 80. The default value is 60.

After the DFS Replication service starts cleanup of the staging folder, it continues to delete the oldest files until the folder size reaches this percentage of the staging folder quota.

Alias	nessuno
Obbligatorio?	false
Posizione?	10
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-ComputerName<String[]>

Specifies an array of names of replication member computers. The cmdlet modifies membership settings for these member computers. You can use a comma separated list and the wildcard character (*). If you do not specify this parameter, the cmdlet modifies settings for the current computer.

Alias	MemberList,MemList
Obbligatorio?	false
Posizione?	1
Valore predefinito	[local computer]
Accetta input da pipeline?	True (ByValue, ByPropertyName)
Accetta caratteri jolly?	false

-DebugLogPath<String>

Specifies a folder path for DFS Replication debug logs. The default location for the logs is %SystemRoot%\Debug. If you specify a custom location for logs by using this parameter, select a drive that DFS Replication does not use for replication. Selecting a drive that DFS Replication does not use for replication minimizes the impact of logging on replication performance.

Alias	nessuno
Obbligatorio?	false
Posizione?	5
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-DebugLogSeverity<UInt32>

Specifies a severity level for debug log entries. I valori accettabili per questo parametro sono:

-- 1 - Write log header information only.
-- 2 - Write errors and header information.
-- 3 - Write warning, error, and header information.
-- 4 - Write informational, warning, error, and header information.
-- 5 - Write trace, informational, warning, error, and header information.
The default value on a DFS Replication computer is 4. If you increase the severity, performance can suffer. Use a higher severity level only for troubleshooting. If you decrease the severity, performance increases slightly but you might lose information necessary to troubleshoot issues and lose root cause information.

Alias	nessuno
Obbligatorio?	false
Posizione?	6
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-DisableDebugLog<Boolean>

Indicates whether to disable debug logging. If you disable debug logging, performance increases slightly but you might lose information necessary to troubleshoot issues and lose root cause information.

Alias	nessuno
Obbligatorio?	false
Posizione?	3
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-MaximumDebugLogFiles<UInt32>

Specifies the number of debug log files to keep. I valori accettabili per questo parametro sono: integers from zero (0) to 100,000. By default, DFS Replication stores 1000 log files. A larger value can degrade performance.

Alias	nessuno
Obbligatorio?	false
Posizione?	4
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-MaximumDebugLogMessages<UInt32>

Specifies the number of messages to write in each debug log file. I valori accettabili per questo parametro sono: integers from 1000 to 4294967295. The default value is 200,000.

Alias	nessuno
Obbligatorio?	false
Posizione?	7
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-RPCPort<UInt32>

Specifies a static TCP port for the DFS Replication service to listen on for the Remote Procedure Call (RPC) protocol. I valori accettabili per questo parametro sono: integers from 1024 to 65535. By default, DFS Replication listens on a dynamic port. Specify a value of zero (0) or $Null for DFS Replication to listen on a dynamic port.

Microsoft recommends a dynamic port. You might need to specify a static port to accommodate a firewall.

Alias	nessuno
Obbligatorio?	false
Posizione?	2
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-UnexpectedAutoRecovery<Boolean>

Indicates whether to set the value for the registry key named StopReplicationAutoRecovery to zero (0) or one (1). A value of zero allows the server to automatically recover after it shuts down incorrectly or hardware fails. Specify a value of $False to set this registry value to one (1). The default value is zero.

When a server shuts down incorrectly and recovers automatically, the database must be validated. Setting the value to one allows you to perform other recovery, backup, or troubleshooting options before resuming replication.

The recommended value for this parameter is $True.

Alias	nessuno
Obbligatorio?	false
Posizione?	8
Valore predefinito	nessuno
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-Confirm

Richiede conferma prima di eseguire il cmdlet.

Obbligatorio?	false
Posizione?	named
Valore predefinito	False
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

-WhatIf

Mostra gli effetti dell'esecuzione del cmdlet. Il cmdlet non viene eseguito.

Obbligatorio?	false
Posizione?	named
Valore predefinito	False
Accetta input da pipeline?	false
Accetta caratteri jolly?	false

<CommonParameters>

Questo cmdlet supporta i parametri comuni: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer e -OutVariable. Per altre informazioni, vedere   about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Input

Il tipo di input è il tipo degli oggetti che è possibile reindirizzare al cmdlet.

• string

Output

Il tipo di output corrisponde al tipo di oggetti generati dal cmdlet.

• DfsrServiceConfiguration

Esempi

Example 1: Configure a computer to use a dynamic RPC port

This command configures the local computer to use a dynamic RPC port for DFS Replication. A value of zero (0) or $Null for the RPCPort parameter configures the computer to use a dynamic port.

PS C:\> Set-DfsrServiceConfiguration -RPCPort 0

Example 2: Configure all members to log messages with specific severity

This command configures all members of all replication groups to log messages with a severity of five (5). The command gets all members of all replication groups by using the Get-DfsrMember cmdlet. The command passes these members to the Set-DfsrServiceConfiguration cmdlet by using the pipeline operator. That cmdlet changes the severity level for debug logging to five. The command modifies two member computers. The console displays the two members found, including the new setting for severity.

PS C:\> Get-DfsrMember | Set-DfsrServiceConfiguration -DebugLogSeverity 5

Argomenti correlati

Get-DfsrServiceConfiguration

Get-DfsrMember

Set-DfsrMembership