Stopwatch.ElapsedMilliseconds プロパティ
定義
重要
一部の情報は、リリース前に大きく変更される可能性があるプレリリースされた製品に関するものです。 Microsoft は、ここに記載されている情報について、明示または黙示を問わず、一切保証しません。
現在のインスタンスで計測された経過時間の合計を取得します (ミリ秒単位)。
public:
property long ElapsedMilliseconds { long get(); };public long ElapsedMilliseconds { get; }member this.ElapsedMilliseconds : int64Public ReadOnly Property ElapsedMilliseconds As Longプロパティ値
現在のインスタンスで計測されたミリ秒の合計を表す読み取り専用の長整数。
例
次の例では、 クラスを Stopwatch 使用して、文字列から整数を解析するための 4 つの異なる実装のパフォーマンスを測定します。 このコード例は、Stopwatch クラスのために提供されている大規模な例の一部です。
void TimeOperations()
{
Int64 nanosecPerTick = (1000L * 1000L * 1000L) / Stopwatch::Frequency;
const long numIterations = 10000;
// Define the operation title names.
array<String^>^operationNames = {"Operation: Int32.Parse(\"0\")","Operation: Int32.TryParse(\"0\")","Operation: Int32.Parse(\"a\")","Operation: Int32.TryParse(\"a\")"};
// Time four different implementations for parsing
// an integer from a string.
for ( int operation = 0; operation <= 3; operation++ )
{
// Define variables for operation statistics.
Int64 numTicks = 0;
Int64 numRollovers = 0;
Int64 maxTicks = 0;
Int64 minTicks = Int64::MaxValue;
int indexFastest = -1;
int indexSlowest = -1;
Int64 milliSec = 0;
Stopwatch ^ time10kOperations = Stopwatch::StartNew();
// Run the current operation 10001 times.
// The first execution time will be tossed
// out, since it can skew the average time.
for ( int i = 0; i <= numIterations; i++ )
{
Int64 ticksThisTime = 0;
int inputNum;
Stopwatch ^ timePerParse;
switch ( operation )
{
case 0:
// Parse a valid integer using
// a try-catch statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch::StartNew();
try
{
inputNum = Int32::Parse( "0" );
}
catch ( FormatException^ )
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse->Stop();
ticksThisTime = timePerParse->ElapsedTicks;
break;
case 1:
// Parse a valid integer using
// the TryParse statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch::StartNew();
if ( !Int32::TryParse( "0", inputNum ) )
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse->Stop();
ticksThisTime = timePerParse->ElapsedTicks;
break;
case 2:
// Parse an invalid value using
// a try-catch statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch::StartNew();
try
{
inputNum = Int32::Parse( "a" );
}
catch ( FormatException^ )
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse->Stop();
ticksThisTime = timePerParse->ElapsedTicks;
break;
case 3:
// Parse an invalid value using
// the TryParse statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch::StartNew();
if ( !Int32::TryParse( "a", inputNum ) )
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse->Stop();
ticksThisTime = timePerParse->ElapsedTicks;
break;
default:
break;
}
// Skip over the time for the first operation,
// just in case it caused a one-time
// performance hit.
if ( i == 0 )
{
time10kOperations->Reset();
time10kOperations->Start();
}
else
{
// Update operation statistics
// for iterations 1-10001.
if ( maxTicks < ticksThisTime )
{
indexSlowest = i;
maxTicks = ticksThisTime;
}
if ( minTicks > ticksThisTime )
{
indexFastest = i;
minTicks = ticksThisTime;
}
numTicks += ticksThisTime;
if ( numTicks < ticksThisTime )
{
// Keep track of rollovers.
numRollovers++;
}
}
}
// Display the statistics for 10000 iterations.
time10kOperations->Stop();
milliSec = time10kOperations->ElapsedMilliseconds;
Console::WriteLine();
Console::WriteLine( "{0} Summary:", operationNames[ operation ] );
Console::WriteLine( " Slowest time: #{0}/{1} = {2} ticks", indexSlowest, numIterations, maxTicks );
Console::WriteLine( " Fastest time: #{0}/{1} = {2} ticks", indexFastest, numIterations, minTicks );
Console::WriteLine( " Average time: {0} ticks = {1} nanoseconds", numTicks / numIterations, (numTicks * nanosecPerTick) / numIterations );
Console::WriteLine( " Total time looping through {0} operations: {1} milliseconds", numIterations, milliSec );
}
}
private static void TimeOperations()
{
long nanosecPerTick = (1000L*1000L*1000L) / Stopwatch.Frequency;
const long numIterations = 10000;
// Define the operation title names.
String [] operationNames = {"Operation: Int32.Parse(\"0\")",
"Operation: Int32.TryParse(\"0\")",
"Operation: Int32.Parse(\"a\")",
"Operation: Int32.TryParse(\"a\")"};
// Time four different implementations for parsing
// an integer from a string.
for (int operation = 0; operation <= 3; operation++)
{
// Define variables for operation statistics.
long numTicks = 0;
long numRollovers = 0;
long maxTicks = 0;
long minTicks = Int64.MaxValue;
int indexFastest = -1;
int indexSlowest = -1;
long milliSec = 0;
Stopwatch time10kOperations = Stopwatch.StartNew();
// Run the current operation 10001 times.
// The first execution time will be tossed
// out, since it can skew the average time.
for (int i=0; i<=numIterations; i++)
{
long ticksThisTime = 0;
int inputNum;
Stopwatch timePerParse;
switch (operation)
{
case 0:
// Parse a valid integer using
// a try-catch statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew();
try
{
inputNum = Int32.Parse("0");
}
catch (FormatException)
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse.Stop();
ticksThisTime = timePerParse.ElapsedTicks;
break;
case 1:
// Parse a valid integer using
// the TryParse statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew();
if (!Int32.TryParse("0", out inputNum))
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse.Stop();
ticksThisTime = timePerParse.ElapsedTicks;
break;
case 2:
// Parse an invalid value using
// a try-catch statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew();
try
{
inputNum = Int32.Parse("a");
}
catch (FormatException)
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse.Stop();
ticksThisTime = timePerParse.ElapsedTicks;
break;
case 3:
// Parse an invalid value using
// the TryParse statement.
// Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew();
if (!Int32.TryParse("a", out inputNum))
{
inputNum = 0;
}
// Stop the timer, and save the
// elapsed ticks for the operation.
timePerParse.Stop();
ticksThisTime = timePerParse.ElapsedTicks;
break;
default:
break;
}
// Skip over the time for the first operation,
// just in case it caused a one-time
// performance hit.
if (i == 0)
{
time10kOperations.Reset();
time10kOperations.Start();
}
else
{
// Update operation statistics
// for iterations 1-10000.
if (maxTicks < ticksThisTime)
{
indexSlowest = i;
maxTicks = ticksThisTime;
}
if (minTicks > ticksThisTime)
{
indexFastest = i;
minTicks = ticksThisTime;
}
numTicks += ticksThisTime;
if (numTicks < ticksThisTime)
{
// Keep track of rollovers.
numRollovers ++;
}
}
}
// Display the statistics for 10000 iterations.
time10kOperations.Stop();
milliSec = time10kOperations.ElapsedMilliseconds;
Console.WriteLine();
Console.WriteLine("{0} Summary:", operationNames[operation]);
Console.WriteLine(" Slowest time: #{0}/{1} = {2} ticks",
indexSlowest, numIterations, maxTicks);
Console.WriteLine(" Fastest time: #{0}/{1} = {2} ticks",
indexFastest, numIterations, minTicks);
Console.WriteLine(" Average time: {0} ticks = {1} nanoseconds",
numTicks / numIterations,
(numTicks * nanosecPerTick) / numIterations );
Console.WriteLine(" Total time looping through {0} operations: {1} milliseconds",
numIterations, milliSec);
}
}
Private Shared Sub TimeOperations()
Dim nanosecPerTick As Long = 1000000000 / Stopwatch.Frequency
Const numIterations As Long = 10000
' Define the operation title names.
Dim operationNames As String() = _
{"Operation: Int32.Parse(""0"")", _
"Operation: Int32.TryParse(""0"")", _
"Operation: Int32.Parse(""a"")", _
"Operation: Int32.TryParse(""a"")"}
' Time four different implementations for parsing
' an integer from a string.
Dim operation As Integer
For operation = 0 To 3
' Define variables for operation statistics.
Dim numTicks As Long = 0
Dim numRollovers As Long = 0
Dim maxTicks As Long = 0
Dim minTicks As Long = Int64.MaxValue
Dim indexFastest As Integer = - 1
Dim indexSlowest As Integer = - 1
Dim milliSec As Long = 0
Dim time10kOperations As Stopwatch = Stopwatch.StartNew()
' Run the current operation 10001 times.
' The first execution time will be tossed
' out, since it can skew the average time.
Dim i As Integer
For i = 0 To numIterations
Dim ticksThisTime As Long = 0
Dim inputNum As Integer
Dim timePerParse As Stopwatch
Select Case operation
Case 0
' Parse a valid integer using
' a try-catch statement.
' Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew()
Try
inputNum = Int32.Parse("0")
Catch e As FormatException
inputNum = 0
End Try
' Stop the timer, and save the
' elapsed ticks for the operation.
timePerParse.Stop()
ticksThisTime = timePerParse.ElapsedTicks
Case 1
' Parse a valid integer using
' the TryParse statement.
' Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew()
If Not Int32.TryParse("0", inputNum) Then
inputNum = 0
End If
' Stop the timer, and save the
' elapsed ticks for the operation.
timePerParse.Stop()
ticksThisTime = timePerParse.ElapsedTicks
Case 2
' Parse an invalid value using
' a try-catch statement.
' Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew()
Try
inputNum = Int32.Parse("a")
Catch e As FormatException
inputNum = 0
End Try
' Stop the timer, and save the
' elapsed ticks for the operation.
timePerParse.Stop()
ticksThisTime = timePerParse.ElapsedTicks
Case 3
' Parse an invalid value using
' the TryParse statement.
' Start a new stopwatch timer.
timePerParse = Stopwatch.StartNew()
If Not Int32.TryParse("a", inputNum) Then
inputNum = 0
End If
' Stop the timer, and save the
' elapsed ticks for the operation.
timePerParse.Stop()
ticksThisTime = timePerParse.ElapsedTicks
Case Else
End Select
' Skip over the time for the first operation,
' just in case it caused a one-time
' performance hit.
If i = 0 Then
time10kOperations.Reset()
time10kOperations.Start()
Else
' Update operation statistics
' for iterations 1-10001.
If maxTicks < ticksThisTime Then
indexSlowest = i
maxTicks = ticksThisTime
End If
If minTicks > ticksThisTime Then
indexFastest = i
minTicks = ticksThisTime
End If
numTicks += ticksThisTime
If numTicks < ticksThisTime Then
' Keep track of rollovers.
numRollovers += 1
End If
End If
Next i
' Display the statistics for 10000 iterations.
time10kOperations.Stop()
milliSec = time10kOperations.ElapsedMilliseconds
Console.WriteLine()
Console.WriteLine("{0} Summary:", operationNames(operation))
Console.WriteLine(" Slowest time: #{0}/{1} = {2} ticks", _
indexSlowest, numIterations, maxTicks)
Console.WriteLine(" Fastest time: #{0}/{1} = {2} ticks", _
indexFastest, numIterations, minTicks)
Console.WriteLine(" Average time: {0} ticks = {1} nanoseconds", _
numTicks / numIterations, numTicks * nanosecPerTick / numIterations)
Console.WriteLine(" Total time looping through {0} operations: {1} milliseconds", _
numIterations, milliSec)
Next operation
End Sub
End Class
注釈
このプロパティは、最も近いミリ秒の値に切り捨てた経過時間を表します。 より高精度な測定を行う場合は、 プロパティまたは ElapsedTicks プロパティを使用しますElapsed。
インスタンスの実行中または停止中に、プロパティ Elapsed、、および ElapsedTicks に対してStopwatchクエリElapsedMillisecondsを実行できます。 経過時間プロパティは、 の実行中に着実に増加 Stopwatch し、インスタンスが停止しても一定のままです。
既定では、インスタンスの経過時間値は Stopwatch 、測定されたすべての時間間隔の合計と等しくなります。 の Start 各呼び出しは累積経過時間でカウントを開始します。を Stop 呼び出すたびに、現在の間隔の測定が終了し、累積経過時間の値が固定されます。 メソッドを Reset 使用して、既存 Stopwatch のインスタンスの累積経過時間をクリアします。
適用対象
こちらもご覧ください
GitHub で Microsoft と共同作業する
このコンテンツのソースは GitHub にあります。そこで、issue や pull request を作成および確認することもできます。 詳細については、共同作成者ガイドを参照してください。
.NET