Double.CompareTo メソッド

定義

このインスタンスと指定したオブジェクトまたは Double オブジェクトを比較し、このインスタンスの値が指定したオブジェクトまたは Double オブジェクトの値よりも小さいか、同じか、または大きいかを示す整数を返します。

オーバーロード

CompareTo(Double)

このインスタンスと指定した倍精度浮動小数点数を比較し、このインスタンスの値が指定した倍精度浮動小数点数の値よりも小さいか、同じか、または大きいかを示す整数を返します。

CompareTo(Object)

このインスタンスと指定したオブジェクトを比較し、このインスタンスの値が指定したオブジェクトの値よりも小さいか、同じか、または大きいかを示す整数を返します。

CompareTo(Double)

このインスタンスと指定した倍精度浮動小数点数を比較し、このインスタンスの値が指定した倍精度浮動小数点数の値よりも小さいか、同じか、または大きいかを示す整数を返します。

public:
 virtual int CompareTo(double value);
public int CompareTo (double value);
abstract member CompareTo : double -> int
override this.CompareTo : double -> int
Public Function CompareTo (value As Double) As Integer

パラメーター

value
Double

比較対象の倍精度浮動小数点数。

戻り値

このインスタンスと value の相対値を示す符号付き数値。

戻り値 説明
0 より小さい値 このインスタンスは value 未満です。あるいは、このインスタンスは数値ではなく (NaN)、value は数値です。
ゼロ このインスタンスは value と等しいです。あるいは、このインスタンスと value の両方が数値 (NaN)、PositiveInfinity、または NegativeInfinity ではありません。
0 より大きい値 このインスタンスは value より大きいです。あるいは、このインスタンスは数値であり、value は数値ではありません (NaN)。

実装

次のコード例は、複数の値型と参照型のメソッドの CompareTo ジェネリック バージョンと非ジェネリック バージョンを示しています。

// This example demonstrates the two versions of the 
// CompareTo method for several base types.
// The general version takes a parameter of type Object, while the specific
// version takes a type-specific parameter, such as Boolean, Int32, or Double.
using namespace System;

void Show( String^ caption, Object^ var1, Object^ var2, int resultGeneric, int resultNonGeneric )
{
   String^ relation;
   Console::Write( caption );
   if ( resultGeneric == resultNonGeneric )
   {
      if ( resultGeneric < 0 )
            relation = "less than";
      else
      if ( resultGeneric > 0 )
            relation = "greater than";
      else
            relation = "equal to";
      Console::WriteLine( "{0} is {1} {2}", var1, relation, var2 );
   }
   // The following condition will never occur because the generic and non-generic
   // CompareTo methods are equivalent.
   else
   {
      Console::WriteLine( "Generic CompareTo = {0}; non-generic CompareTo = {1}", resultGeneric, resultNonGeneric );
   }
}

int main()
{
   String^ nl = Environment::NewLine;
   String^ msg = "{0}The following is the result of using the generic and non-generic{0}"
   "versions of the CompareTo method for several base types:{0}";
   Object^ obj; // An Object used to insure CompareTo(Object) is called.

   DateTime now = DateTime::Now;
   
   // Time span = 11 days, 22 hours, 33 minutes, 44 seconds
   TimeSpan tsX = TimeSpan(11,22,33,44);
   
   // Version = 1.2.333.4
   Version^ versX = gcnew Version(  "1.2.333.4" );
   
   // Guid = CA761232-ED42-11CE-BACD-00AA0057B223
   Guid guidX = Guid( "{CA761232-ED42-11CE-BACD-00AA0057B223}");
   Boolean a1 = true,a2 = true;
   Byte b1 = 1,b2 = 1;
   Int16 c1 = -2,c2 = 2;
   Int32 d1 = 3,d2 = 3;
   Int64 e1 = 4,e2 = -4;
   Decimal f1 = Decimal(-5.5), f2 = Decimal(5.5);
   Single g1 = 6.6f,g2 = 6.6f;
   Double h1 = 7.7,h2 = -7.7;
   Char i1 = 'A',i2 = 'A';
   String^ j1 = "abc", ^j2 = "abc";
   DateTime k1 = now,k2 = now;
   TimeSpan l1 = tsX,l2 = tsX;
   Version^ m1 = versX, ^m2 = gcnew Version(  "2.0" );
   Guid n1 = guidX,n2 = guidX;
   
   // The following types are not CLS-compliant.
   SByte w1 = 8,w2 = 8;
   UInt16 x1 = 9,x2 = 9;
   UInt32 y1 = 10,y2 = 10;
   UInt64 z1 = 11,z2 = 11;
   
   //
   Console::WriteLine( msg, nl );
   try
   {
      Show( "Boolean: ", a1, a2, a1.CompareTo( a2 ), a1.CompareTo( a2 ) );
      Show( "Byte:    ", b1, b2, b1.CompareTo( b2 ), b1.CompareTo( b2 ) );
      Show( "Int16:   ", c1, c2, c1.CompareTo( c2 ), c1.CompareTo( c2 ) );
      Show( "Int32:   ", d1, d2, d1.CompareTo( d2 ), d1.CompareTo( d2 ) );
      Show( "Int64:   ", e1, e2, e1.CompareTo( e2 ), e1.CompareTo( e2 ) );
      Show( "Decimal: ", f1, f2, f1.CompareTo( f2 ), f1.CompareTo( f2 ) );
      Show( "Single:  ", g1, g2, g1.CompareTo( g2 ), g1.CompareTo( g2 ) );
      Show( "Double:  ", h1, h2, h1.CompareTo( h2 ), h1.CompareTo( h2 ) );
      Show( "Char:    ", i1, i2, i1.CompareTo( i2 ), i1.CompareTo( i2 ) );
      
      // Use an anonymous object to hide the String object.
      obj = j2;
      Show( "String:  ", j1, j2, j1->CompareTo( j2 ), j1->CompareTo( obj ) );
      Show( "DateTime:", k1, k2, k1.CompareTo( k2 ), k1.CompareTo( k2 ) );
      Show(  "TimeSpan: ", l1, l2, l1.CompareTo( l2 ), l1.CompareTo( l2 ) );
      
      // Use an anonymous object to hide the Version object.
      obj = m2;
      Show(  "Version:  ", m1, m2, m1->CompareTo( m2 ), m1->CompareTo( obj ) );
      Show(  "Guid:     ", n1, n2, n1.CompareTo( n2 ), n1.CompareTo( n2 ) );
      
      //
      Console::WriteLine( "{0}The following types are not CLS-compliant:", nl );
      Show( "SByte:   ", w1, w2, w1.CompareTo( w2 ), w1.CompareTo( w2 ) );
      Show( "UInt16:  ", x1, x2, x1.CompareTo( x2 ), x1.CompareTo( x2 ) );
      Show( "UInt32:  ", y1, y2, y1.CompareTo( y2 ), y1.CompareTo( y2 ) );
      Show( "UInt64:  ", z1, z2, z1.CompareTo( z2 ), z1.CompareTo( z2 ) );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e );
   }

}
//     This example displays the following output:
//     
//     The following is the result of using the generic and non-generic versions of the
//     CompareTo method for several base types:
//     
//     Boolean:  True is equal to True
//     Byte:     1 is equal to 1
//     Int16:    -2 is less than 2
//     Int32:    3 is equal to 3
//     Int64:    4 is greater than -4
//     Decimal:  -5.5 is less than 5.5
//     Single:   6.6 is equal to 6.6
//     Double:   7.7 is greater than -7.7
//     Char:     A is equal to A
//     String:   abc is equal to abc
//     DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
//     TimeSpan: 11.22:33:44 is equal to 11.22:33:44
//     Version:  1.2.333.4 is less than 2.0
//     Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
//     aa0057b223
//     
//     The following types are not CLS-compliant:
//     SByte:    8 is equal to 8
//     UInt16:   9 is equal to 9
//     UInt32:   10 is equal to 10
//     UInt64:   11 is equal to 11
// This example demonstrates the generic and non-generic versions of the
// CompareTo method for several base types.
// The non-generic version takes a parameter of type Object, while the generic
// version takes a type-specific parameter, such as Boolean, Int32, or Double.

using System;

class Sample
{
    public static void Main()
    {
    string    nl = Environment.NewLine;
    string    msg = "{0}The following is the result of using the generic and non-generic{0}" +
                    "versions of the CompareTo method for several base types:{0}";

    DateTime  now = DateTime.Now;
// Time span = 11 days, 22 hours, 33 minutes, 44 seconds
    TimeSpan  tsX = new TimeSpan(11, 22, 33, 44);
// Version = 1.2.333.4
    Version   versX = new Version("1.2.333.4");
// Guid = CA761232-ED42-11CE-BACD-00AA0057B223
    Guid      guidX = new Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}");

    Boolean  a1 = true,  a2 = true;
    Byte     b1 = 1,     b2 = 1;
    Int16    c1 = -2,    c2 = 2;
    Int32    d1 = 3,     d2 = 3;
    Int64    e1 = 4,     e2 = -4;
    Decimal  f1 = -5.5m, f2 = 5.5m;
    Single   g1 = 6.6f,  g2 = 6.6f;
    Double   h1 = 7.7d,  h2 = -7.7d;
    Char     i1 = 'A',   i2 = 'A';
    String   j1 = "abc", j2 = "abc";
    DateTime k1 = now,   k2 = now;
    TimeSpan l1 = tsX,   l2 = tsX;
    Version  m1 = versX, m2 = new Version("2.0");
    Guid     n1 = guidX, n2 = guidX;

// The following types are not CLS-compliant.
    SByte    w1 = 8,     w2 = 8;
    UInt16   x1 = 9,     x2 = 9;
    UInt32   y1 = 10,    y2 = 10;
    UInt64   z1 = 11,    z2 = 11;
//
    Console.WriteLine(msg, nl);
    try
        {
// The second and third Show method call parameters are automatically boxed because
// the second and third Show method declaration arguments expect type Object.

        Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo((Object)a2));
        Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo((Object)b2));
        Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo((Object)c2));
        Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo((Object)d2));
        Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo((Object)e2));
        Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo((Object)f2));
        Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo((Object)g2));
        Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo((Object)h2));
        Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo((Object)i2));
        Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo((Object)j2));
        Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo((Object)k2));
        Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo((Object)l2));
        Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo((Object)m2));
        Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo((Object)n2));
//
        Console.WriteLine("{0}The following types are not CLS-compliant:", nl);
        Show("SByte:    ", w1, w2, w1.CompareTo(w2), w1.CompareTo((Object)w2));
        Show("UInt16:   ", x1, x2, x1.CompareTo(x2), x1.CompareTo((Object)x2));
        Show("UInt32:   ", y1, y2, y1.CompareTo(y2), y1.CompareTo((Object)y2));
        Show("UInt64:   ", z1, z2, z1.CompareTo(z2), z1.CompareTo((Object)z2));
        }
    catch (Exception e)
        {
        Console.WriteLine(e);
        }
    }

    public static void Show(string caption, Object var1, Object var2,
                            int resultGeneric, int resultNonGeneric)
    {
    string relation;

    Console.Write(caption);
    if (resultGeneric == resultNonGeneric)
        {
        if      (resultGeneric < 0) relation = "less than";
        else if (resultGeneric > 0) relation = "greater than";
        else                        relation = "equal to";
        Console.WriteLine("{0} is {1} {2}", var1, relation, var2);
        }

// The following condition will never occur because the generic and non-generic
// CompareTo methods are equivalent.

    else
        {
        Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}",
                           resultGeneric, resultNonGeneric);
        }
   }
}
/*
This example produces the following results:

The following is the result of using the generic and non-generic versions of the
CompareTo method for several base types:

Boolean:  True is equal to True
Byte:     1 is equal to 1
Int16:    -2 is less than 2
Int32:    3 is equal to 3
Int64:    4 is greater than -4
Decimal:  -5.5 is less than 5.5
Single:   6.6 is equal to 6.6
Double:   7.7 is greater than -7.7
Char:     A is equal to A
String:   abc is equal to abc
DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
TimeSpan: 11.22:33:44 is equal to 11.22:33:44
Version:  1.2.333.4 is less than 2.0
Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
aa0057b223

The following types are not CLS-compliant:
SByte:    8 is equal to 8
UInt16:   9 is equal to 9
UInt32:   10 is equal to 10
UInt64:   11 is equal to 11
*/
' This example demonstrates the generic and non-generic versions of the 
' CompareTo method for several base types.
' The non-generic version takes a parameter of type Object, while the generic
' version takes a type-specific parameter, such as Boolean, Int32, or Double.

Class Sample
   Public Shared Sub Main()
      Dim nl As String = Environment.NewLine
      Dim msg As String = _
          "{0}The following is the result of using the generic and non-generic{0}" & _
          "versions of the CompareTo method for several base types:{0}"
      
      Dim now As DateTime = DateTime.Now
      ' Time span = 11 days, 22 hours, 33 minutes, 44 seconds
      Dim tsX As New TimeSpan(11, 22, 33, 44)
      ' Version = 1.2.333.4
      Dim versX As New Version("1.2.333.4")
      ' Guid = CA761232-ED42-11CE-BACD-00AA0057B223
      Dim guidX As New Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}")
      
      Dim a1 As [Boolean] = True,    a2 As [Boolean] = True
      Dim b1 As [Byte] = 1,          b2 As [Byte] = 1
      Dim c1 As Int16 = -2,          c2 As Int16 = 2
      Dim d1 As Int32 = 3,           d2 As Int32 = 3
      Dim e1 As Int64 = 4,           e2 As Int64 = -4
      Dim f1 As [Decimal] = -5.5D,   f2 As [Decimal] = 5.5D
      Dim g1 As [Single] = 6.6F,     g2 As [Single] = 6.6F
      Dim h1 As [Double] = 7.7,      h2 As [Double] = -7.7
      Dim i1 As [Char] = "A"c,       i2 As [Char] = "A"c
      Dim j1 As String = "abc",      j2 As String = "abc"
      Dim k1 As DateTime = now,      k2 As DateTime = now
      Dim l1 As TimeSpan = tsX,      l2 As TimeSpan = tsX
      Dim m1 As Version = versX,     m2 As New Version("2.0")
      Dim n1 As Guid = guidX,        n2 As Guid = guidX
      
      ' The following types are not CLS-compliant.
      ' SByte, UInt16, UInt32, UInt64

      Console.WriteLine(msg, nl)
      Try
         ' The second and third Show method call parameters are automatically boxed because
         ' the second and third Show method declaration arguments expect type Object.

         Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo(CObj(a2)))
         Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo(CObj(b2)))
         Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo(CObj(c2)))
         Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo(CObj(d2)))
         Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo(CObj(e2)))
         Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo(CObj(f2)))
         Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo(CObj(g2)))
         Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo(CObj(h2)))
         Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo(CObj(i2)))
         Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo(CObj(j2)))
         Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo(CObj(k2)))
         Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo(CObj(l2)))
         Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo(CObj(m2)))
         Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo(CObj(n2)))
         '
         Console.WriteLine("{0}The following types are not CLS-compliant:", nl)
         Console.WriteLine("SByte, UInt16, UInt32, UInt64")

      Catch e As Exception
         Console.WriteLine(e)
      End Try
   End Sub
   
   Public Shared Sub Show(caption As String, var1 As [Object], var2 As [Object], _
                          resultGeneric As Integer, resultNonGeneric As Integer)
      Dim relation As String
      
      Console.Write(caption)
      If resultGeneric = resultNonGeneric Then
         If resultGeneric < 0 Then
            relation = "less than"
         ElseIf resultGeneric > 0 Then
            relation = "greater than"
         Else
            relation = "equal to"
         End If
         Console.WriteLine("{0} is {1} {2}", var1, relation, var2)
      
      ' The following condition will never occur because the generic and non-generic
      ' CompareTo methods are equivalent.

      Else
         Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}", _
                            resultGeneric, resultNonGeneric)
      End If
   End Sub
End Class
'
'This example produces the following results:
'
'The following is the result of using the generic and non-generic versions of the
'CompareTo method for several base types:
'
'Boolean:  True is equal to True
'Byte:     1 is equal to 1
'Int16:    -2 is less than 2
'Int32:    3 is equal to 3
'Int64:    4 is greater than -4
'Decimal:  -5.5 is less than 5.5
'Single:   6.6 is equal to 6.6
'Double:   7.7 is greater than -7.7
'Char:     A is equal to A
'String:   abc is equal to abc
'DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
'TimeSpan: 11.22:33:44 is equal to 11.22:33:44
'Version:  1.2.333.4 is less than 2.0
'Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
'aa0057b223
'
'The following types are not CLS-compliant:
'SByte, UInt16, UInt32, UInt64
'

注釈

この API の詳細については、「 Double.CompareTo」を参照してください。

こちらもご覧ください

適用対象

CompareTo(Object)

このインスタンスと指定したオブジェクトを比較し、このインスタンスの値が指定したオブジェクトの値よりも小さいか、同じか、または大きいかを示す整数を返します。

public:
 virtual int CompareTo(System::Object ^ value);
public int CompareTo (object? value);
public int CompareTo (object value);
abstract member CompareTo : obj -> int
override this.CompareTo : obj -> int
Public Function CompareTo (value As Object) As Integer

パラメーター

value
Object

比較対象のオブジェクト、または null

戻り値

このインスタンスと value の相対値を示す符号付き数値。

説明
負の整数 このインスタンスは value 未満です。あるいは、このインスタンスは数値ではなく (NaN)、value は数値です。
ゼロ このインスタンスは value と等しいです。あるいは、このインスタンスと value の両方が Double.NaNPositiveInfinity、または NegativeInfinity です。
正の整数 このインスタンスは value より大きいです。あるいは、このインスタンスは数値であり、value が数値ではない (NaN) または、valuenull です。

実装

例外

valueDouble ではありません。

次のコード例は、 のコンテキストDoubleでの のCompareTo使用を示しています。

obj1 = (Double)450;
      
if (a.CompareTo(obj1) < 0)
   Console.WriteLine("{0} is less than {1}.", a.ToString(), obj1.ToString());

if (a.CompareTo(obj1) > 0)
   Console.WriteLine("{0} is greater than {1}.", a.ToString(), obj1.ToString());

if (a.CompareTo(obj1) == 0)
   Console.WriteLine("{0} equals {1}.", a.ToString(), obj1.ToString());
let obj1 = double 450 |> box
    
if a.CompareTo obj1 < 0 then
    printfn $"{a} is less than {obj1}."

if a.CompareTo obj1 > 0 then
    printfn $"{a} is greater than {obj1}."

if a.CompareTo obj1 = 0 then
    printfn $"{a} equals {obj1}."
Obj1 = CType(450, Double)

If A.CompareTo(Obj1) < 0 Then
    Console.WriteLine(A.ToString() + " is less than " + Obj1.ToString() + ".")
End If

If (A.CompareTo(Obj1) > 0) Then
    Console.WriteLine(A.ToString() + " is greater than " + Obj1.ToString() + ".")
End If

If (A.CompareTo(Obj1) = 0) Then
    Console.WriteLine(A.ToString() + " equals " + Obj1.ToString() + ".")
End If

注釈

この API の詳細については、「 Double.CompareTo」を参照してください。

こちらもご覧ください

適用対象