次の方法で共有


SocketPermission.IsSubsetOf(IPermission) メソッド

定義

現在のアクセス許可が、指定したアクセス許可のサブセットかどうかを判断します。

public:
 override bool IsSubsetOf(System::Security::IPermission ^ target);
public override bool IsSubsetOf (System.Security.IPermission target);
override this.IsSubsetOf : System.Security.IPermission -> bool
Public Overrides Function IsSubsetOf (target As IPermission) As Boolean

パラメーター

target
IPermission

サブセットの関係を調べる対象の SocketPermission

戻り値

targetnull で、現在のインスタンスがアクセス許可を定義していない場合、このメソッドは true を返します。それ以外の場合は、false を返します。 targetnull ではなく、現在のインスタンスが target のアクセス許可のサブセットを定義している場合は、true を返します。それ以外の場合は false を返します。

例外

targetSocketException ではありません。

DnsPermission が、メソッドの呼び出し側では付与されていません。

次の例では、 メソッドを IsSubsetOf 使用して、1 つが SocketPermission 別のサブセットであるかどうかを判断します。

// Creates a SocketPermission restricting access to and from all URIs.
SocketPermission^ mySocketPermission1 = gcnew SocketPermission( PermissionState::None );

// The socket to which this permission will apply will allow connections from www.contoso.com.
mySocketPermission1->AddPermission( NetworkAccess::Accept, TransportType::Tcp,  "www.contoso.com", 11000 );

// Creates a SocketPermission which will allow the target Socket to connect with www.southridgevideo.com.
SocketPermission^ mySocketPermission2 = gcnew SocketPermission( NetworkAccess::Connect,TransportType::Tcp, "www.southridgevideo.com",11002 );

// Creates a SocketPermission from the union of two SocketPermissions.
SocketPermission^ mySocketPermissionUnion =
   (SocketPermission^)( mySocketPermission1->Union( mySocketPermission2 ) );

// Checks to see if the union was successfully created by using the IsSubsetOf method.
if ( mySocketPermission1->IsSubsetOf( mySocketPermissionUnion ) &&
   mySocketPermission2->IsSubsetOf( mySocketPermissionUnion ) )
{
   Console::WriteLine(  "This union contains permissions from both mySocketPermission1 and mySocketPermission2" );
   
   // Prints the allowable accept URIs to the console.
   Console::WriteLine(  "This union accepts connections on :" );

   IEnumerator^ myEnumerator = mySocketPermissionUnion->AcceptList;
   while ( myEnumerator->MoveNext() )
   {
      Console::WriteLine( safe_cast<EndpointPermission^>( myEnumerator->Current )->ToString() );
   }
   
   // Prints the allowable connect URIs to the console.
   Console::WriteLine(  "This union permits connections to :" );

   myEnumerator = mySocketPermissionUnion->ConnectList;
   while ( myEnumerator->MoveNext() )
   {
      Console::WriteLine( safe_cast<EndpointPermission^>( myEnumerator->Current )->ToString() );
   }
}

// Creates a SocketPermission restricting access to and from all URIs.
SocketPermission mySocketPermission1 = new SocketPermission(PermissionState.None);

// The socket to which this permission will apply will allow connections from www.contoso.com.
mySocketPermission1.AddPermission(NetworkAccess.Accept, TransportType.Tcp, "www.contoso.com", 11000);

// Creates a SocketPermission which will allow the target Socket to connect with www.southridgevideo.com.
SocketPermission mySocketPermission2 =
                           new SocketPermission(NetworkAccess.Connect, TransportType.Tcp, "www.southridgevideo.com", 11002);

// Creates a SocketPermission from the union of two SocketPermissions.
SocketPermission mySocketPermissionUnion =
                           (SocketPermission)mySocketPermission1.Union(mySocketPermission2);

// Checks to see if the union was successfully created by using the IsSubsetOf method.
if (mySocketPermission1.IsSubsetOf(mySocketPermissionUnion) &&
      mySocketPermission2.IsSubsetOf(mySocketPermissionUnion)){
     Console.WriteLine("This union contains permissions from both mySocketPermission1 and mySocketPermission2");

     // Prints the allowable accept URIs to the console.
     Console.WriteLine("This union accepts connections on :");

     IEnumerator myEnumerator = mySocketPermissionUnion.AcceptList;
  while (myEnumerator.MoveNext()) {
          Console.WriteLine(((EndpointPermission)myEnumerator.Current).ToString());
       }

        // Prints the allowable connect URIs to the console.
     Console.WriteLine("This union permits connections to :");

     myEnumerator = mySocketPermissionUnion.ConnectList;
  while (myEnumerator.MoveNext()) {
          Console.WriteLine(((EndpointPermission)myEnumerator.Current).ToString());
       }
      }
' Creates a SocketPermission restricting access to and from all URIs.
Dim mySocketPermission1 As New SocketPermission(PermissionState.None)

' The socket to which this permission will apply will allow connections from www.contoso.com.
mySocketPermission1.AddPermission(NetworkAccess.Accept, TransportType.Tcp, "www.contoso.com", 11000)

' Creates a SocketPermission which will allow the target Socket to connect with www.southridgevideo.com.
Dim mySocketPermission2 As New SocketPermission(NetworkAccess.Connect, TransportType.Tcp, "www.southridgevideo.com", 11002)

' Creates a SocketPermission from the union of two SocketPermissions.
Dim mySocketPermissionUnion As SocketPermission = CType(mySocketPermission1.Union(mySocketPermission2), SocketPermission)

' Checks to see if the union was successfully created by using the IsSubsetOf method.
If mySocketPermission1.IsSubsetOf(mySocketPermissionUnion) And mySocketPermission2.IsSubsetOf(mySocketPermissionUnion) Then
   Console.WriteLine("This union contains permissions from both mySocketPermission1 and mySocketPermission2")
   
   ' Prints the allowable accept URIs to the console.
   Console.WriteLine("This union accepts connections on :")
   
   Dim myEnumerator As IEnumerator = mySocketPermissionUnion.AcceptList
   While myEnumerator.MoveNext()
      Console.WriteLine(CType(myEnumerator.Current, EndpointPermission).ToString())
   End While
   
   Console.WriteLine("This union establishes connections on : ")
   
   ' Prints the allowable connect URIs to the console.
   Console.WriteLine("This union permits connections to :")
   
   myEnumerator = mySocketPermissionUnion.ConnectList
   While myEnumerator.MoveNext()
      Console.WriteLine(CType(myEnumerator.Current, EndpointPermission).ToString())
   End While
End If

注釈

現在のアクセス許可が、指定したアクセス許可に完全に含まれる操作のセットを指定している場合、現在のアクセス許可は、指定されたアクセス許可のサブセットです。

たとえば、192.168.1.1:80 へのアクセスを表すアクセス許可は、192.168.1.1:Any へのアクセスを表すアクセス許可のサブセットです。 このメソッドが を返す true場合、現在のアクセス許可は、指定されたアクセス許可よりも保護されたリソースへのアクセスを表しません。

適用対象