次の方法で共有


SDK Helpers for Debugging

Applies to: yesVisual Studio noVisual Studio for Mac

Note

This article applies to Visual Studio 2017. If you're looking for the latest Visual Studio documentation, see Visual Studio documentation. We recommend upgrading to the latest version of Visual Studio. Download it here

These functions and declarations are global helper functions for implementing debug engines, expression evaluators, and symbol providers in C++.

Note

There are no managed versions of these functions and declarations at this time.

Overview

In order for debug engines, expression evaluators, and symbol providers to be used by Visual Studio, they must be registered. This is done by setting registry subkeys and entries, otherwise known as "setting metrics." The following global functions are designed to ease the process of updating these metrics. See the section on Registry Locations to find out the layout of each registry subkey that is updated by these functions.

General Metric Functions

These are general functions used by debug engines. Specialized functions for expression evaluators and symbol providers are detailed later.

GetMetric Method

Retrieves a metric value from the registry.

HRESULT GetMetric(
   LPCWSTR pszMachine,
   LPCWSTR pszType,
   REFGUID guidSection,
   LPCWSTR pszMetric,
   DWORD * pdwValue,
   LPCWSTR pszAltRoot
);
Parameter Description
pszMachine [in] Name of a possibly remote machine whose register will be written (NULL means local machine).
pszType [in] One of the metric types.
guidSection [in] GUID of a specific engine, evaluator, exception, etc. This specifies a subsection under a metric type for a specific element.
pszMetric [in] The metric to be obtained. This corresponds to a specific value name.
pdwValue [in] The storage location of the value from the metric. There are several flavors of GetMetric that can return a DWORD (as in this example), a BSTR, a GUID, or an array of GUIDs.
pszAltRoot [in] An alternate registry root to use. Set to NULL to use the default.

SetMetric Method

Sets the specified metric value in the registry.

HRESULT SetMetric(
         LPCWSTR pszType,
         REFGUID guidSection,
         LPCWSTR pszMetric,
   const DWORD   dwValue,
         bool    fUserSpecific,
         LPCWSTR pszAltRoot
);
Parameter Description
pszType [in] One of the metric types.
guidSection [in] GUID of a specific engine, evaluator, exception, etc. This specifies a subsection under a metric type for a specific element.
pszMetric [in] The metric to be obtained. This corresponds to a specific value name.
dwValue [in] The storage location of the value in the metric. There are several flavors of SetMetric that can store a DWORD (in this example), a BSTR, a GUID, or an array of GUIDs.
fUserSpecific [in] TRUE if the metric is user-specific and if it should be written to the user's hive instead of the local machine hive.
pszAltRoot [in] An alternate registry root to use. Set to NULL to use the default.

RemoveMetric Method

Removes the specified metric from the registry.

HRESULT RemoveMetric(
   LPCWSTR pszType,
   REFGUID guidSection,
   LPCWSTR pszMetric,
   LPCWSTR pszAltRoot
);
Parameter Description
pszType [in] One of the metric types.
guidSection [in] GUID of a specific engine, evaluator, exception, etc. This specifies a subsection under a metric type for a specific element.
pszMetric [in] The metric to be removed. This corresponds to a specific value name.
pszAltRoot [in] An alternate registry root to use. Set to NULL to use the default.

EnumMetricSections Method

Enumerates the various metric sections in the registry.

HRESULT EnumMetricSections(
   LPCWSTR pszMachine,
   LPCWSTR pszType,
   GUID *  rgguidSections,
   DWORD * pdwSize,
   LPCWSTR pszAltRoot
);
Parameter Description
pszMachine [in] Name of a possibly remote machine whose register will be written (NULL means local machine).
pszType [in] One of the metric types.
rgguidSections [in, out] Preallocated array of GUIDs to be filled in.
pdwSize [in] The maximum number of GUIDs that can be stored in the rgguidSections array.
pszAltRoot [in] An alternate registry root to use. Set to NULL to use the default.

Expression Evaluator Functions

Function Description
GetEEMetric Retrieves a metric value from the registry.
SetEEMetric Sets the specified metric value in the registry.
RemoveEEMetric Removes the specified metric from the registry.
GetEEMetricFile Gets a file name from the specified metric and loads it, returning the file contents as a string.

Exception Functions

Function Description
GetExceptionMetric Retrieves a metric value from the registry.
SetExceptionMetric Sets the specified metric value in the registry.
RemoveExceptionMetric Removes the specified metric from the registry.
RemoveAllExceptionMetrics Removes all exception metrics from the registry.

Symbol Provider Functions

Function Description
GetSPMetric Retrieves a metric value from the registry.
SetSPMetric Sets the specified metric value in the registry.
RemoveSPMetric Removes the specified metric from the registry.

Enumeration Functions

Function Description
EnumMetricSections Enumerates all metrics for a specified metric type.
EnumDebugEngine Enumerates the registered debug engines.
EnumEEs Enumerates the registered expression evaluators.
EnumExceptionMetrics Enumerates all exception metrics.

Metric Definitions

These definitions can be used for predefined metric names. The names correspond to various registry keys and value names and are all defined as wide character strings: for example, extern LPCWSTR metrictypeEngine.

Predefined Metric Types Description: The base key for....
metrictypeEngine All debug engine metrics.
metrictypePortSupplier All port supplier metrics.
metrictypeException All exception metrics.
metricttypeEEExtension All expression evaluator extensions.
Debug Engine Properties Description
metricAddressBP Set to nonzero to indicate support for address breakpoints.
metricAlwaysLoadLocal Set to nonzero in order to always load the debug engine locally.
metricLoadInDebuggeeSession NOT USED
metricLoadedByDebuggee Set to nonzero to indicate that the debug engine will always be loaded with or by the program being debugged.
metricAttach Set to nonzero to indicate support for attachment to existing programs.
metricCallStackBP Set to nonzero to indicate support for call stack breakpoints.
metricConditionalBP Set to nonzero to indicate support for the setting of conditional breakpoints.
metricDataBP Set to nonzero to indicate support for the setting of breakpoints on changes in data.
metricDisassembly Set to nonzero to indicate support for the production of a disassembly listing.
metricDumpWriting Set to nonzero to indicate support for dump writing (the dumping of memory to an output device).
metricENC Set to nonzero to indicate support for Edit and Continue. Note: A custom debug engine should never set this or should always set it to 0.
metricExceptions Set to nonzero to indicate support for exceptions.
metricFunctionBP Set to nonzero to indicate support for named breakpoints (breakpoints that break when a certain function name is called).
metricHitCountBP Set to nonzero to indicate support for the setting of "hit point" breakpoints (breakpoints that are triggered only after being hit a certain number of times).
metricJITDebug Set to nonzero to indicate support for just-in-time debugging (the debugger is launched when an exception occurs in a running process).
metricMemory NOT USED
metricPortSupplier Set this to the CLSID of the port supplier if one is implemented.
metricRegisters NOT USED
metricSetNextStatement Set to nonzero to indicate support for setting the next statement (which skips execution of intermediate statements).
metricSuspendThread Set to nonzero to indicate support for suspending thread execution.
metricWarnIfNoSymbols Set to nonzero to indicate that the user should be notified if there are no symbols.
metricProgramProvider Set this to the CLSID of the program provider.
metricAlwaysLoadProgramProviderLocal Set this to nonzero to indicate that the program provider should always be loaded locally.
metricEngineCanWatchProcess Set this to nonzero to indicate that the debug engine will watch for process events instead of the program provider.
metricRemoteDebugging Set this to nonzero to indicate support for remote debugging.
metricEncUseNativeBuilder Set this to nonzero to indicate that the Edit and Continue Manager should use the debug engine's encbuild.dll to build for Edit and Continue. Note: A custom debug engine should never set this or should always set it to 0.
metricLoadUnderWOW64 Set this to nonzero to indicate that the debug engine should be loaded in the debuggee process under WOW when debugging a 64-bit process; otherwise, the debug engine will be loaded in the Visual Studio process (which is running under WOW64).
metricLoadProgramProviderUnderWOW64 Set this to nonzero to indicate that the program provider should be loaded in the debuggee process when debugging a 64-bit process under WOW; otherwise, it will be loaded in the Visual Studio process.
metricStopOnExceptionCrossingManagedBoundary Set this to nonzero to indicate that the process should stop if an unhandled exception is thrown across managed/unmanaged code boundaries.
metricAutoSelectPriority Set this to a priority for automatic selection of the debug engine (higher values equals higher priority).
metricAutoSelectIncompatibleList Registry key containing entries that specify GUIDs for debug engines to be ignored in automatic selection. These entries are a number (0, 1, 2, and so on) with a GUID expressed as a string.
metricIncompatibleList Registry key containing entries that specify GUIDs for debug engines that are incompatible with this debug engine.
metricDisableJITOptimization Set this to nonzero to indicate that just-in-time optimizations (for managed code) should be disabled during debugging.
Expression Evaluator Properties Description
metricEngine This holds the number of debug engines that support the specified expression evaluator.
metricPreloadModules Set this to nonzero to indicate that modules should be preloaded when an expression evaluator is launched against a program.
metricThisObjectName Set this to the "this" object name.
Expression Evaluator Extension Properties Description
metricExtensionDll Name of the dll that supports this extension.
metricExtensionRegistersSupported List of registers supported.
metricExtensionRegistersEntryPoint Entry point for accessing registers.
metricExtensionTypesSupported List of types supported.
metricExtensionTypesEntryPoint Entry point for accessing types.
Port Supplier Properties Description
metricPortPickerCLSID The CLSID of the port picker (a dialog box the user can use to select ports and add ports to use for debugging).
metricDisallowUserEnteredPorts Nonzero if the user-entered ports cannot be added to the port supplier (this makes the port-picker dialog box essentially read-only).
metricPidBase The base process ID used by the port supplier when allocating process IDs.
Predefined SP Store Types Description
storetypeFile The symbols are stored in a separate file.
storetypeMetadata The symbols are stored as metadata in an assembly.
Miscellaneous Properties Description
metricShowNonUserCode Set this to nonzero to show nonuser code.
metricJustMyCodeStepping Set this to nonzero to indicate that stepping can occur only in user code.
metricCLSID CLSID for an object of a specific metric type.
metricName User-friendly name for an object of a specific metric type.
metricLanguage Language name.

Registry Locations

The metrics are read from and written to the registry, specifically in the VisualStudio subkey.

Note

Most of the time, the metrics will be written to the HKEY_LOCAL_MACHINE key. However, sometimes HKEY_CURRENT_USER will be the destination key. Dbgmetric.lib handles both keys. When getting a metric, it searches HKEY_CURRENT_USER first, then HKEY_LOCAL_MACHINE. When it is setting a metric, a parameter specifies which top-level key to use.

[registry key]\

Software\

Microsoft\

VisualStudio\

[version root]\

[metric root]\

[metric type]\

[metric] = [metric value]

[metric] = [metric value]

[metric] = [metric value]

Placeholder Description
[registry key] HKEY_CURRENT_USER or HKEY_LOCAL_MACHINE.
[version root] The version of Visual Studio (for example, 7.0, 7.1, or 8.0). However, this root can also be modified using the /rootsuffix switch to devenv.exe. For VSIP, this modifier is typically Exp, so the version root would be, for example, 8.0Exp.
[metric root] This is either AD7Metrics or AD7Metrics(Debug), depending on whether the debug version of dbgmetric.lib is used. Note: Whether or not dbgmetric.lib is used, this naming convention should be adhered to if you have differences between debug and release versions that must be reflected in the registry.
[metric type] The type of metric to be written: Engine, ExpressionEvaluator, SymbolProvider, etc. These are all defined as in dbgmetric.h as metricTypeXXXX, where XXXX is the specific type name.
[metric] The name of an entry to be assigned a value in order to set the metric. The actual organization of the metrics depends on the metric type.
[metric value] The value assigned to the metric. The type the value should have (string, number, etc.) depends on the metric.

Note

All GUIDs are stored in the format of {GUID}. For example, {123D150B-FA18-461C-B218-45B3E4589F9B}.

Debug Engines

The following is the organization of the debug engines metrics in the registry. Engine is the metric type name for a debug engine and corresponds to [metric type] in the above registry subtree.

Engine\

[engine guid]\

CLSID = [class guid]

[metric] = [metric value]

[metric] = [metric value]

[metric] = [metric value]

PortSupplier\

0 = [port supplier guid]

1 = [port supplier guid]

Placeholder Description
[engine guid] The GUID of the debug engine.
[class guid] The GUID of the class that implements this debug engine.
[port supplier guid] The GUID of the port supplier, if any. Many debug engines use the default port supplier and therefore do not specify their own supplier. In this case, the subkey PortSupplier will be absent.

Port Suppliers

The following is the organization of the port supplier metrics in the registry. PortSupplier is the metric type name for a port supplier and corresponds to [metric type].

PortSupplier\

[port supplier guid]\

CLSID = [class guid]

[metric] = [metric value]

[metric] = [metric value]

Placeholder Description
[port supplier guid] The GUID of the port supplier
[class guid] The GUID of the class that implements this port supplier

Symbol Providers

The following is the organization of the symbol supplier metrics in the registry. SymbolProvider is the metric type name for the symbol provider and corresponds to [metric type].

SymbolProvider\

[symbol provider guid]\

file\

CLSID = [class guid]

[metric] = [metric value]

[metric] = [metric value]

metadata\

CLSID = [class guid]

[metric] = [metric value]

[metric] = [metric value]

Placeholder Description
[symbol provider guid] The GUID of the symbol provider
[class guid] The GUID of the class that implements this symbol provider

Expression Evaluators

The following is the organization of the expression evaluator metrics in the registry. ExpressionEvaluator is the metric type name for the expression evaluator and corresponds to [metric type].

Note

The metric type for ExpressionEvaluator is not defined in dbgmetric.h, as it is assumed that all metric changes for expression evaluators will go through the appropriate expression evaluator metric functions (the layout of the ExpressionEvaluator subkey is somewhat complicated, so the details are hidden inside dbgmetric.lib).

ExpressionEvaluator\

[language guid]\

[vendor guid]\

CLSID = [class guid]

[metric] = [metric value]

[metric] = [metric value]

Engine\

0 = [debug engine guid]

1 = [debug engine guid]

Placeholder Description
[language guid] The GUID of a language
[vendor guid] The GUID of a vendor
[class guid] The GUID of the class that implements this expression evaluator
[debug engine guid] The GUID of a debug engine that this expression evaluator works with

Expression Evaluator Extensions

The following is the organization of the expression evaluator extension metrics in the registry. EEExtensions is the metric type name for the expression evaluator extensions and corresponds to [metric type].

EEExtensions\

[extension guid]\

[metric] = [metric value]

[metric] = [metric value]

Placeholder Description
[extension guid] The GUID of an expression evaluator extension

Exceptions

The following is the organization of the exceptions metrics in the registry. Exception is the metric type name for the exceptions and corresponds to [metric type].

Exception\

[debug engine guid]\

[exception types]\

[exception]\

[metric] = [metric value]

[metric] = [metric value]

[exception]\

[metric] = [metric value]

[metric] = [metric value]

Placeholder Description
[debug engine guid] The GUID of a debug engine that supports exceptions.
[exception types] A general title for the subkey identifying the class of exceptions that can be handled. Typical names are C++ Exceptions, Win32 Exceptions, Common Language Runtime Exceptions, and Native Run-Time Checks. These names are also used to identify a particular class of exception to the user.
[exception] A name for an exception: for example, _com_error or Control-Break. These names are also used to identify a particular exception to the user.

Requirements

These files are located in the Microsoft Visual Studio 2010 SDK installation directory (by default, [drive]\Program Files\Microsoft Visual Studio 2010 SDK\).

Header: includes\dbgmetric.h

Library: libs\ad2de.lib, libs\dbgmetric.lib

See also