다음을 통해 공유


OracleDataAdapter 생성자

정의

OracleDataAdapter 클래스의 새 인스턴스를 초기화합니다.

오버로드

OracleDataAdapter()

OracleDataAdapter 클래스의 새 인스턴스를 초기화합니다.

OracleDataAdapter(OracleCommand)

지정된 SQL SELECT 문을 사용하여 OracleDataAdapter 클래스의 새 인스턴스를 초기화합니다.

OracleDataAdapter(String, OracleConnection)

SQL SELECT 문 및 OracleDataAdapter을 사용하여 OracleConnection 클래스의 새 인스턴스를 초기화합니다.

OracleDataAdapter(String, String)

SQL SELECT 문과 연결 문자열을 사용하여 OracleDataAdapter 클래스의 새 인스턴스를 초기화합니다.

OracleDataAdapter()

OracleDataAdapter 클래스의 새 인스턴스를 초기화합니다.

public:
 OracleDataAdapter();
public OracleDataAdapter ();
Public Sub New ()

예제

다음 예제에서는 만들고 OracleDataAdapter 해당 속성 중 일부를 설정합니다.

Public Sub CreateOracleDataAdapter()  
    Dim myOracleConnection As OracleConnection = New OracleConnection("Data Source=Oracle8i;Integrated Security=yes")  
    Dim custDA As OracleDataAdapter = New OracleDataAdapter  
    custDA.MissingSchemaAction = MissingSchemaAction.AddWithKey  

    custDA.SelectCommand = New OracleCommand("SELECT DeptNo, DName FROM Dept", myOracleConnection)  
    custDA.InsertCommand = New OracleCommand("INSERT INTO Dept (DeptNo, DName) " & _  
                                            "VALUES (:pDeptNo, :pDName)", myOracleConnection)  
    custDA.UpdateCommand = New OracleCommand("UPDATE Dept SET DeptNo = :pDeptNo, DName = :pDName " & _  
                                            "WHERE DeptNo = :pDeptNo", myOracleConnection)  
    custDA.DeleteCommand = New OracleCommand("DELETE FROM Dept WHERE DeptNo = :pDeptNo", myOracleConnection)  

    custDA.InsertCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo")  
    custDA.InsertCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName")  

    custDA.UpdateCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo")  
    custDA.UpdateCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName")  
    custDA.UpdateCommand.Parameters.Add("poldDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original  

    custDA.DeleteCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original  
End Sub  
public static void CreateOracleDataAdapter()   
{  
    OracleConnection myOracleConnection = new OracleConnection("Data Source=Oracle8i;Integrated Security=yes");  
    OracleDataAdapter custDA = new OracleDataAdapter();  
    custDA.MissingSchemaAction = MissingSchemaAction.AddWithKey;  

    custDA.SelectCommand = new OracleCommand("SELECT DeptNo, CompanyName FROM Dept", myOracleConnection);  
    custDA.InsertCommand = new OracleCommand("INSERT INTO Dept (DeptNo, CompanyName) " +  
                                            "VALUES (:pDeptNo, :pCompanyName)", myOracleConnection);  
    custDA.UpdateCommand = new OracleCommand("UPDATE Dept SET DeptNo = :pDeptNo, CompanyName = :pCompanyName " +  
                                            "WHERE DeptNo = :pDeptNo", myOracleConnection);  
    custDA.DeleteCommand = new OracleCommand("DELETE FROM Dept WHERE DeptNo = :pDeptNo", myOracleConnection);  

    custDA.InsertCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo");  
    custDA.InsertCommand.Parameters.Add("pCompanyName", OracleType.VarChar, 14, "CompanyName");  

    custDA.UpdateCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo");  
    custDA.UpdateCommand.Parameters.Add("pCompanyName", OracleType.VarChar, 14, "CompanyName");  
    custDA.UpdateCommand.Parameters.Add("poldDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original;  

    custDA.DeleteCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original;  
}  

설명

OracleDataAdapterinstance 만들 때 테이블에 표시된 것처럼 다음 읽기/쓰기 속성이 기본값으로 설정됩니다.

속성 기본값
MissingMappingAction MissingMappingAction.Passthrough
MissingSchemaAction MissingSchemaAction.Add

속성에 대한 별도의 호출을 통해 이러한 속성의 값을 변경할 수 있습니다.

추가 정보

적용 대상

OracleDataAdapter(OracleCommand)

지정된 SQL SELECT 문을 사용하여 OracleDataAdapter 클래스의 새 인스턴스를 초기화합니다.

public:
 OracleDataAdapter(System::Data::OracleClient::OracleCommand ^ selectCommand);
public OracleDataAdapter (System.Data.OracleClient.OracleCommand selectCommand);
new System.Data.OracleClient.OracleDataAdapter : System.Data.OracleClient.OracleCommand -> System.Data.OracleClient.OracleDataAdapter
Public Sub New (selectCommand As OracleCommand)

매개 변수

selectCommand
OracleCommand

SQL SELECT 문 또는 저장 프로시저이고 OracleCommandSelectCommand 속성으로 설정되는 OracleDataAdapter입니다.

예제

다음 예제에서는 만들고 OracleDataAdapter 해당 속성 중 일부를 설정합니다.

Public Sub CreateOracleDataAdapter()  
    Dim myOracleConnection As OracleConnection = New OracleConnection("Data Source=Oracle8i;Integrated Security=yes")  
    Dim myOracleCommand As OracleCommand = New OracleCommand("SELECT DeptNo, DName FROM Dept", myOracleConnection)  
    Dim custDA As OracleDataAdapter = New OracleDataAdapter(myOracleCommand)  
    custDA.MissingSchemaAction = MissingSchemaAction.AddWithKey  

    custDA.InsertCommand = New OracleCommand("INSERT INTO Dept (DeptNo, DName) " & _  
                                            "VALUES (:pDeptNo, :pDName)", myOracleConnection)  
    custDA.UpdateCommand = New OracleCommand("UPDATE Dept SET DeptNo = :pDeptNo, DName = :pDName " & _  
                                            "WHERE DeptNo = :pDeptNo", myOracleConnection)  
    custDA.DeleteCommand = New OracleCommand("DELETE FROM Dept WHERE DeptNo = :pDeptNo", myOracleConnection)  

    custDA.InsertCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo")  
    custDA.InsertCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName")  

    custDA.UpdateCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo")  
    custDA.UpdateCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName")  
    custDA.UpdateCommand.Parameters.Add("poldDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original  

    custDA.DeleteCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original  
End Sub  
public static void CreateOracleDataAdapter()   
{  
    OracleConnection myOracleConnection = new OracleConnection("Data Source=Oracle8i;Integrated Security=yes");  
    OracleCommand myOracleCommand = new OracleCommand("SELECT DeptNo, DName FROM Dept", myOracleConnection);  
    OracleDataAdapter custDA = new OracleDataAdapter(myOracleCommand);  
    custDA.MissingSchemaAction = MissingSchemaAction.AddWithKey;  

    custDA.InsertCommand = new OracleCommand("INSERT INTO Dept (DeptNo, DName) " +  
                                            "VALUES (:pDeptNo, :pDName)", myOracleConnection);  
    custDA.UpdateCommand = new OracleCommand("UPDATE Dept SET DeptNo = :pDeptNo, DName = :pDName " +  
                                            "WHERE DeptNo = :pDeptNo", myOracleConnection);  
    custDA.DeleteCommand = new OracleCommand("DELETE FROM Dept WHERE DeptNo = :pDeptNo", myOracleConnection);  

    custDA.InsertCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo");  
    custDA.InsertCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName");  

    custDA.UpdateCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo");  
    custDA.UpdateCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName");  
    custDA.UpdateCommand.Parameters.Add("poldDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original;  

    custDA.DeleteCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original;  
}  

설명

생성자의 이 구현 OracleDataAdapter 은 속성을 매개 변수에 지정된 값으로 selectCommand 설정합니다SelectCommand.

OracleDataAdapterinstance 만들 때 테이블에 표시된 것처럼 다음 읽기/쓰기 속성이 기본값으로 설정됩니다.

속성 초기 값
MissingMappingAction MissingMappingAction.Passthrough
MissingSchemaAction MissingSchemaAction.Add

속성에 대한 별도의 호출을 통해 이러한 속성의 값을 변경할 수 있습니다.

추가 정보

적용 대상

OracleDataAdapter(String, OracleConnection)

SQL SELECT 문 및 OracleDataAdapter을 사용하여 OracleConnection 클래스의 새 인스턴스를 초기화합니다.

public:
 OracleDataAdapter(System::String ^ selectCommandText, System::Data::OracleClient::OracleConnection ^ selectConnection);
public OracleDataAdapter (string selectCommandText, System.Data.OracleClient.OracleConnection selectConnection);
new System.Data.OracleClient.OracleDataAdapter : string * System.Data.OracleClient.OracleConnection -> System.Data.OracleClient.OracleDataAdapter
Public Sub New (selectCommandText As String, selectConnection As OracleConnection)

매개 변수

selectCommandText
String

SelectCommandOracleDataAdapter 속성에서 사용될 SQL SELECT 문이나 저장 프로시저인 문자열입니다.

selectConnection
OracleConnection

연결을 나타내는 OracleConnection입니다.

예제

다음 예제에서는 만들고 OracleDataAdapter 해당 속성 중 일부를 설정합니다.

Public Sub CreateOracleDataAdapter()  
    Dim myOracleConnection As OracleConnection = New OracleConnection("Data Source=Oracle8i;Integrated Security=yes")  
    Dim mySelectText As String = "SELECT DeptNo, DName FROM Dept"  
    Dim custDA As OracleDataAdapter = New OracleDataAdapter(mySelectText, myOracleConnection)   
    custDA.MissingSchemaAction = MissingSchemaAction.AddWithKey  

    custDA.InsertCommand = New OracleCommand("INSERT INTO Dept (DeptNo, DName) " & _  
                                            "VALUES (:pDeptNo, :pDName)", myOracleConnection)  
    custDA.UpdateCommand = New OracleCommand("UPDATE Dept SET DeptNo = :pDeptNo, DName = :pDName " & _  
                                            "WHERE DeptNo = :pDeptNo", myOracleConnection)  
    custDA.DeleteCommand = New OracleCommand("DELETE FROM Dept WHERE DeptNo = :pDeptNo", myOracleConnection)  

    custDA.InsertCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo")  
    custDA.InsertCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName")  

    custDA.UpdateCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo")  
    custDA.UpdateCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName")  
    custDA.UpdateCommand.Parameters.Add("poldDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original  

    custDA.DeleteCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original  
End Sub  
public static void CreateOracleDataAdapter()   
{  
    OracleConnection myOracleConnection = new OracleConnection("Data Source=Oracle8i;Integrated Security=yes");  

    string mySelectText = "SELECT DeptNo, DName FROM Dept";  

    OracleDataAdapter custDA = new OracleDataAdapter(mySelectText, myOracleConnection );  
    custDA.MissingSchemaAction = MissingSchemaAction.AddWithKey;  

    custDA.InsertCommand = new OracleCommand("INSERT INTO Dept (DeptNo, DName) " +  
                                            "VALUES (:pDeptNo, :pDName)", myOracleConnection);  
    custDA.UpdateCommand = new OracleCommand("UPDATE Dept SET DeptNo = :pDeptNo, DName = :pDName " +  
                                            "WHERE DeptNo = :pDeptNo", myOracleConnection);  
    custDA.DeleteCommand = new OracleCommand("DELETE FROM Dept WHERE DeptNo = :pDeptNo", myOracleConnection);  

    custDA.InsertCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo");  
    custDA.InsertCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName");  

    custDA.UpdateCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo");  
    custDA.UpdateCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName");  
    custDA.UpdateCommand.Parameters.Add("poldDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original;  

    custDA.DeleteCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original;  
}  

설명

이 구현의 합니다 OracleDataAdapter 호출 해야 하는 애플리케이션에 유용할 수 있습니다를 Fill 메서드 두 개 이상의 OracleDataAdapter 개체입니다.

추가 정보

적용 대상

OracleDataAdapter(String, String)

SQL SELECT 문과 연결 문자열을 사용하여 OracleDataAdapter 클래스의 새 인스턴스를 초기화합니다.

public:
 OracleDataAdapter(System::String ^ selectCommandText, System::String ^ selectConnectionString);
public OracleDataAdapter (string selectCommandText, string selectConnectionString);
new System.Data.OracleClient.OracleDataAdapter : string * string -> System.Data.OracleClient.OracleDataAdapter
Public Sub New (selectCommandText As String, selectConnectionString As String)

매개 변수

selectCommandText
String

SelectCommandOracleDataAdapter 속성에서 사용될 SQL SELECT 문이나 저장 프로시저인 문자열입니다.

selectConnectionString
String

연결 문자열입니다.

예제

다음 예제에서는 만들고 OracleDataAdapter 해당 속성 중 일부를 설정합니다.

Public Sub CreateOracleDataAdapter()  
    Dim myConnectionText As String = "Data Source=Oracle8i;Integrated Security=yes"  
    Dim mySelectText As String = "SELECT DeptNo, DName FROM Dept"  
    Dim custDA As OracleDataAdapter = New OracleDataAdapter(mySelectText, myConnectionText )   
    Dim myOracleConnection As OracleConnection = custDA.SelectCommand.Connection  

    custDA.MissingSchemaAction = MissingSchemaAction.AddWithKey     

    custDA.InsertCommand = New OracleCommand("INSERT INTO Dept (DeptNo, DName) " & _  
                                            "VALUES (:pDeptNo, :pDName)", myOracleConnection)  
    custDA.UpdateCommand = New OracleCommand("UPDATE Dept SET DeptNo = :pDeptNo, DName = :pDName " & _  
                                            "WHERE DeptNo = :pDeptNo", myOracleConnection)  
    custDA.DeleteCommand = New OracleCommand("DELETE FROM Dept WHERE DeptNo = :pDeptNo", myOracleConnection)  

    custDA.InsertCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo")  
    custDA.InsertCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName")  

    custDA.UpdateCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo")  
    custDA.UpdateCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName")  
    custDA.UpdateCommand.Parameters.Add("poldDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original  

    custDA.DeleteCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original  
End Sub  
public static void CreateOracleDataAdapter()   
{  
    string myConnectionText = "Data Source=Oracle8i;Integrated Security=yes";  

    string mySelectText = "SELECT DeptNo, DName FROM Dept";  

    OracleDataAdapter custDA = new OracleDataAdapter(mySelectText, myConnectionText );  
   OracleConnection myOracleConnection = custDA.SelectCommand.Connection;  

    custDA.MissingSchemaAction = MissingSchemaAction.AddWithKey;  

    custDA.InsertCommand = new OracleCommand("INSERT INTO Dept (DeptNo, DName) " +  
                                            "VALUES (:pDeptNo, :pDName)", myOracleConnection);  
    custDA.UpdateCommand = new OracleCommand("UPDATE Dept SET DeptNo = :pDeptNo, DName = :pDName " +  
                                            "WHERE DeptNo = :pDeptNo", myOracleConnection);  
    custDA.DeleteCommand = new OracleCommand("DELETE FROM Dept WHERE DeptNo = :pDeptNo", myOracleConnection);  

    custDA.InsertCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo");  
    custDA.InsertCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName");  

    custDA.UpdateCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo");  
    custDA.UpdateCommand.Parameters.Add("pDName", OracleType.VarChar, 14, "DName");  
    custDA.UpdateCommand.Parameters.Add("poldDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original;  

    custDA.DeleteCommand.Parameters.Add("pDeptNo", OracleType.Number, 2, "DeptNo").SourceVersion = DataRowVersion.Original;  
}  

추가 정보

적용 대상