Debug.Write 메서드
정의
중요
일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.
Listeners 컬렉션의 추적 수신기에 디버그에 대한 정보를 씁니다.
오버로드
Write(String, String) |
Listeners 컬렉션의 추적 수신기에 범주 이름 및 메시지를 씁니다. |
Write(Object, String) |
ToString() 컬렉션의 추적 수신기에 범주 이름 및 개체의 Listeners 메서드 값을 씁니다. |
Write(String) |
Listeners 컬렉션의 추적 수신기에 메시지를 씁니다. |
Write(Object) |
ToString() 컬렉션의 추적 수신기에 개체의 Listeners 메서드 값을 씁니다. |
Write(String, String)
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
Listeners 컬렉션의 추적 수신기에 범주 이름 및 메시지를 씁니다.
public:
static void Write(System::String ^ message, System::String ^ category);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (string message, string category);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (string? message, string? category);
[<System.Diagnostics.Conditional("DEBUG")>]
static member Write : string * string -> unit
Public Shared Sub Write (message As String, category As String)
매개 변수
- message
- String
쓸 메시지입니다.
- category
- String
출력을 구성하는 데 사용되는 범주 이름입니다.
- 특성
예제
다음 예제에서는 라는 generalSwitch
를 TraceSwitch 만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기 Listeners 를 추가하는 방법에 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 가 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 두 번째 오류 메시지를 출력합니다. 줄 종결자는 두 번째 메시지를 따릅니다.
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General","Entire Application" );
public:
static void MyErrorMethod( Object^ myObject, String^ category )
{
// Write the message if the TraceSwitch level is set to Error or higher.
if ( generalSwitch->TraceError )
{
#if defined(DEBUG)
Debug::Write( myObject, category );
#endif
}
// Write a second message if the TraceSwitch level is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
#if defined(DEBUG)
Debug::Write( " Object is not valid for this category." );
#endif
}
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(Object myObject, string category)
{
// Write the message if the TraceSwitch level is set to Error or higher.
if (generalSwitch.TraceError)
Debug.Write(myObject, category);
// Write a second message if the TraceSwitch level is set to Verbose.
if (generalSwitch.TraceVerbose)
Debug.WriteLine(" Object is not valid for this category.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(myObject As Object, category As String)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Debug.Write(myObject, category)
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Debug.WriteLine(" Object is not valid for this category.")
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
매개 변수를 category
사용하여 출력 메시지를 그룹화합니다.
이 메서드는 Write 추적 수신기의 메서드를 호출합니다.
추가 정보
- Debug
- Trace
- BooleanSwitch
- TraceSwitch
- TraceListener
- DefaultTraceListener
- ConsoleTraceListener
- ConditionalAttribute
적용 대상
Write(Object, String)
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
ToString() 컬렉션의 추적 수신기에 범주 이름 및 개체의 Listeners 메서드 값을 씁니다.
public:
static void Write(System::Object ^ value, System::String ^ category);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (object value, string category);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (object? value, string? category);
[<System.Diagnostics.Conditional("DEBUG")>]
static member Write : obj * string -> unit
Public Shared Sub Write (value As Object, category As String)
매개 변수
- category
- String
출력을 구성하는 데 사용되는 범주 이름입니다.
- 특성
예제
다음 예제에서는 라는 generalSwitch
를 TraceSwitch 만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기 Listeners 를 추가하는 방법에 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 가 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 두 번째 오류 메시지를 출력합니다. 줄 종결자는 두 번째 메시지를 따릅니다.
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General","Entire Application" );
public:
static void MyErrorMethod( Object^ myObject, String^ category )
{
// Write the message if the TraceSwitch level is set to Error or higher.
if ( generalSwitch->TraceError )
{
#if defined(DEBUG)
Debug::Write( myObject, category );
#endif
}
// Write a second message if the TraceSwitch level is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
#if defined(DEBUG)
Debug::Write( " Object is not valid for this category." );
#endif
}
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(Object myObject, string category)
{
// Write the message if the TraceSwitch level is set to Error or higher.
if (generalSwitch.TraceError)
Debug.Write(myObject, category);
// Write a second message if the TraceSwitch level is set to Verbose.
if (generalSwitch.TraceVerbose)
Debug.WriteLine(" Object is not valid for this category.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(myObject As Object, category As String)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Debug.Write(myObject, category)
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Debug.WriteLine(" Object is not valid for this category.")
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
매개 변수를 category
사용하여 출력 메시지를 그룹화합니다.
이 메서드는 Write 추적 수신기의 메서드를 호출합니다.
추가 정보
- Debug
- Trace
- BooleanSwitch
- TraceSwitch
- TraceListener
- DefaultTraceListener
- ConsoleTraceListener
- ConditionalAttribute
적용 대상
Write(String)
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
Listeners 컬렉션의 추적 수신기에 메시지를 씁니다.
public:
static void Write(System::String ^ message);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (string message);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (string? message);
[<System.Diagnostics.Conditional("DEBUG")>]
static member Write : string -> unit
Public Shared Sub Write (message As String)
매개 변수
- message
- String
쓸 메시지입니다.
- 특성
예제
다음 예제에서는 라는 generalSwitch
를 TraceSwitch 만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기 Listeners 를 추가하는 방법에 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 가 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 두 번째 오류 메시지를 출력합니다. 줄 종결자는 두 번째 메시지를 따릅니다.
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General","Entire Application" );
public:
static void MyErrorMethod( Object^ myObject, String^ category )
{
// Write the message if the TraceSwitch level is set to Error or higher.
if ( generalSwitch->TraceError )
{
#if defined(DEBUG)
Debug::Write( myObject, category );
#endif
}
// Write a second message if the TraceSwitch level is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
#if defined(DEBUG)
Debug::Write( " Object is not valid for this category." );
#endif
}
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(Object myObject, string category)
{
// Write the message if the TraceSwitch level is set to Error or higher.
if (generalSwitch.TraceError)
Debug.Write(myObject, category);
// Write a second message if the TraceSwitch level is set to Verbose.
if (generalSwitch.TraceVerbose)
Debug.WriteLine(" Object is not valid for this category.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(myObject As Object, category As String)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Debug.Write(myObject, category)
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Debug.WriteLine(" Object is not valid for this category.")
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
이 메서드는 Write 추적 수신기의 메서드를 호출합니다.
추가 정보
- Debug
- Trace
- BooleanSwitch
- TraceSwitch
- TraceListener
- DefaultTraceListener
- ConsoleTraceListener
- ConditionalAttribute
적용 대상
Write(Object)
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
ToString() 컬렉션의 추적 수신기에 개체의 Listeners 메서드 값을 씁니다.
public:
static void Write(System::Object ^ value);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (object value);
[System.Diagnostics.Conditional("DEBUG")]
public static void Write (object? value);
[<System.Diagnostics.Conditional("DEBUG")>]
static member Write : obj -> unit
Public Shared Sub Write (value As Object)
매개 변수
- 특성
예제
다음 예제에서는 라는 generalSwitch
를 TraceSwitch 만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기 Listeners 를 추가하는 방법에 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 가 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 두 번째 오류 메시지를 출력합니다. 줄 종결자는 두 번째 메시지를 따릅니다.
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General","Entire Application" );
public:
static void MyErrorMethod( Object^ myObject, String^ category )
{
// Write the message if the TraceSwitch level is set to Error or higher.
if ( generalSwitch->TraceError )
{
#if defined(DEBUG)
Debug::Write( myObject, category );
#endif
}
// Write a second message if the TraceSwitch level is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
#if defined(DEBUG)
Debug::Write( " Object is not valid for this category." );
#endif
}
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(Object myObject, string category)
{
// Write the message if the TraceSwitch level is set to Error or higher.
if (generalSwitch.TraceError)
Debug.Write(myObject, category);
// Write a second message if the TraceSwitch level is set to Verbose.
if (generalSwitch.TraceVerbose)
Debug.WriteLine(" Object is not valid for this category.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(myObject As Object, category As String)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Debug.Write(myObject, category)
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Debug.WriteLine(" Object is not valid for this category.")
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
이 메서드는 Write 추적 수신기의 메서드를 호출합니다.
추가 정보
- Debug
- Trace
- BooleanSwitch
- TraceSwitch
- TraceListener
- DefaultTraceListener
- ConsoleTraceListener
- ConditionalAttribute
적용 대상
.NET
피드백
https://aka.ms/ContentUserFeedback
출시 예정: 2024년 내내 콘텐츠에 대한 피드백 메커니즘으로 GitHub 문제를 단계적으로 폐지하고 이를 새로운 피드백 시스템으로 바꿀 예정입니다. 자세한 내용은 다음을 참조하세요.다음에 대한 사용자 의견 제출 및 보기