GraphicsPath.AddLines 메서드
정의
중요
일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.
연결된 일련의 선 세그먼트를 이 GraphicsPath의 끝에 추가합니다.
오버로드
AddLines(Point[]) |
연결된 일련의 선 세그먼트를 이 GraphicsPath의 끝에 추가합니다. |
AddLines(PointF[]) |
연결된 일련의 선 세그먼트를 이 GraphicsPath의 끝에 추가합니다. |
AddLines(ReadOnlySpan<Point>) | |
AddLines(ReadOnlySpan<PointF>) |
AddLines(Point[])
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
연결된 일련의 선 세그먼트를 이 GraphicsPath의 끝에 추가합니다.
public:
void AddLines(cli::array <System::Drawing::Point> ^ points);
public:
void AddLines(... cli::array <System::Drawing::Point> ^ points);
public void AddLines (System.Drawing.Point[] points);
public void AddLines (params System.Drawing.Point[] points);
member this.AddLines : System.Drawing.Point[] -> unit
Public Sub AddLines (points As Point())
Public Sub AddLines (ParamArray points As Point())
매개 변수
예제
다음 코드 예제는 Windows Forms 사용하도록 설계되었으며 이벤트 개체인 이 OnPaint 필요합니다PaintEventArgse
. 코드는 다음 작업을 수행합니다.
삼각형을 설명하는 4개의 점 배열을 만듭니다.
경로를 만들고 선 배열을 추가합니다.
화면의 경로를 그립니다.
첫 번째 점 뒤의 각 줄은 이전 지점을 시작점으로 사용하고 새 점을 엔드포인트로 사용합니다.
private:
void AddLinesExample( PaintEventArgs^ e )
{
// Create a symetrical triangle using an array of points.
array<Point>^ myArray = {Point(30,30),Point(60,60),Point(0,60),Point(30,30)};
//Create a path and add lines.
GraphicsPath^ myPath = gcnew GraphicsPath;
myPath->AddLines( myArray );
// Draw the path to the screen.
Pen^ myPen = gcnew Pen( Color::Black,2.0f );
e->Graphics->DrawPath( myPen, myPath );
}
private void AddLinesExample(PaintEventArgs e)
{
// Create a symmetrical triangle using an array of points.
Point[] myArray =
{
new Point(30,30),
new Point(60,60),
new Point(0,60),
new Point(30,30)
};
//Create a path and add lines.
GraphicsPath myPath = new GraphicsPath();
myPath.AddLines(myArray);
// Draw the path to the screen.
Pen myPen = new Pen(Color.Black, 2);
e.Graphics.DrawPath(myPen, myPath);
}
Public Sub AddLinesExample(ByVal e As PaintEventArgs)
'Create a symmetrical triangle using an array of points.
Dim myArray As Point() = {New Point(30, 30), New Point(60, 60), _
New Point(0, 60), New Point(30, 30)}
Dim myPath As New GraphicsPath
myPath.AddLines(myArray)
' Draw the path to the screen.
Dim myPen As New Pen(Color.Black, 2)
e.Graphics.DrawPath(myPen, myPath)
End Sub
설명
그림에 이전 선 또는 곡선이 있는 경우 선이 추가되어 이전 세그먼트의 엔드포인트를 선의 시작점에 연결합니다. 매개 변수는 points
엔드포인트의 배열을 지정합니다. 처음 두 줄은 첫 번째 줄을 지정합니다. 각 추가 지점은 시작점이 이전 줄의 엔드포인트인 선 세그먼트의 엔드포인트를 지정합니다.
적용 대상
AddLines(PointF[])
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
- Source:
- GraphicsPath.cs
연결된 일련의 선 세그먼트를 이 GraphicsPath의 끝에 추가합니다.
public:
void AddLines(cli::array <System::Drawing::PointF> ^ points);
public:
void AddLines(... cli::array <System::Drawing::PointF> ^ points);
public void AddLines (System.Drawing.PointF[] points);
public void AddLines (params System.Drawing.PointF[] points);
member this.AddLines : System.Drawing.PointF[] -> unit
Public Sub AddLines (points As PointF())
Public Sub AddLines (ParamArray points As PointF())
매개 변수
예제
예제를 보려면 AddLines(Point[])를 참조하세요.
설명
그림에 이전 선 또는 곡선이 있는 경우 선이 추가되어 이전 세그먼트의 엔드포인트를 선의 시작점에 연결합니다. 매개 변수는 points
엔드포인트의 배열을 지정합니다. 처음 두 줄은 첫 번째 줄을 지정합니다. 각 추가 지점은 시작점이 이전 줄의 엔드포인트인 선 세그먼트의 엔드포인트를 지정합니다.
적용 대상
AddLines(ReadOnlySpan<Point>)
- Source:
- GraphicsPath.cs
public:
void AddLines(ReadOnlySpan<System::Drawing::Point> points);
public void AddLines (ReadOnlySpan<System.Drawing.Point> points);
member this.AddLines : ReadOnlySpan<System.Drawing.Point> -> unit
Public Sub AddLines (points As ReadOnlySpan(Of Point))
매개 변수
- points
- ReadOnlySpan<Point>
적용 대상
AddLines(ReadOnlySpan<PointF>)
- Source:
- GraphicsPath.cs
public:
void AddLines(ReadOnlySpan<System::Drawing::PointF> points);
public void AddLines (ReadOnlySpan<System.Drawing.PointF> points);
member this.AddLines : ReadOnlySpan<System.Drawing.PointF> -> unit
Public Sub AddLines (points As ReadOnlySpan(Of PointF))
매개 변수
- points
- ReadOnlySpan<PointF>
적용 대상
.NET
피드백
https://aka.ms/ContentUserFeedback
출시 예정: 2024년 내내 콘텐츠에 대한 피드백 메커니즘으로 GitHub 문제를 단계적으로 폐지하고 이를 새로운 피드백 시스템으로 바꿀 예정입니다. 자세한 내용은 다음을 참조하세요.다음에 대한 사용자 의견 제출 및 보기