Matrix.Multiply 메서드

정의

네임스페이스:

System.Drawing.Drawing2D

어셈블리:

System.Drawing.Common.dll

패키지:

System.Drawing.Common v9.0.0-preview.6.24327.6

지정된 Matrix앞에 추가하여 이 Matrix 지정된 Matrix 곱합니다.

오버로드

Multiply(Matrix)	지정된 Matrix앞에 추가하여 이 Matrixmatrix 매개 변수에 지정된 행렬을 곱합니다.
Multiply(Matrix, MatrixOrder)	이 Matrixmatrix 매개 변수에 지정된 행렬과 order 매개 변수에 지정된 순서로 곱합니다.

Multiply(Matrix)

Source:

Matrix.cs

지정된 Matrix앞에 추가하여 이 Matrixmatrix 매개 변수에 지정된 행렬을 곱합니다.

public:
 void Multiply(System::Drawing::Drawing2D::Matrix ^ matrix);

public void Multiply (System.Drawing.Drawing2D.Matrix matrix);

member this.Multiply : System.Drawing.Drawing2D.Matrix -> unit

Public Sub Multiply (matrix As Matrix)

매개 변수

matrix

Matrix

이 Matrix 곱할 Matrix.

예제

예제는 Multiply참조하세요.

Multiply(Matrix, MatrixOrder)

Source:

Matrix.cs

이 Matrixmatrix 매개 변수에 지정된 행렬과 order 매개 변수에 지정된 순서로 곱합니다.

public:
 void Multiply(System::Drawing::Drawing2D::Matrix ^ matrix, System::Drawing::Drawing2D::MatrixOrder order);

public void Multiply (System.Drawing.Drawing2D.Matrix matrix, System.Drawing.Drawing2D.MatrixOrder order);

member this.Multiply : System.Drawing.Drawing2D.Matrix * System.Drawing.Drawing2D.MatrixOrder -> unit

Public Sub Multiply (matrix As Matrix, order As MatrixOrder)

매개 변수

matrix

Matrix

이 Matrix 곱할 Matrix.

order

MatrixOrder

곱하기 순서를 나타내는 MatrixOrder.

예제

다음 코드 예제는 Windows Forms에서 사용하도록 설계되었으며 Paint 이벤트 개체인 PaintEventArgse필요합니다. 코드는 다음 작업을 수행합니다.

• 세 개의 행렬을 만듭니다.

• 화면에 행렬 1의 내용을 나열합니다.

• 행렬 1을 행렬 2로 곱하고 결과를 행렬 1에 저장합니다.

• 화면에 행렬 1의 내용을 나열합니다.

• 행렬 1에 저장된 결과를 행렬 3으로 곱하고 결과를 행렬 1에 다시 저장합니다.

• 화면에 행렬 1의 내용을 나열합니다.

• 행렬 1 변환(파란색 사각형)을 적용하기 전에 화면에 사각형을 그립니다.

• 사각형에 변환을 적용합니다.

• 이전 사각형과 동일한 좌표를 사용하여 변환된 사각형을 화면(빨간색 사각형)에 그립니다.

빨간색 사각형은 가로 방향으로 2배씩 배율 조정된 다음 90도 회전한 다음 x 방향으로 250포인트, y 방향으로 50포인트 이동(변환)됩니다.

public:
   void MultiplyExample( PaintEventArgs^ e )
   {
      Pen^ myPen = gcnew Pen( Color::Blue,1.0f );
      Pen^ myPen2 = gcnew Pen( Color::Red,1.0f );

      // Set up the matrices.
      Matrix^ myMatrix1 = gcnew Matrix( 2.0f,0.0f,0.0f,1.0f,0.0f,0.0f );
      Matrix^ myMatrix2 = gcnew Matrix( 0.0f,1.0f,-1.0f,0.0f,0.0f,0.0f );
      Matrix^ myMatrix3 = gcnew Matrix( 1.0f,0.0f,0.0f,1.0f,250.0f,50.0f );

      // Display the elements of the starting matrix.
      ListMatrixElements( e, myMatrix1, "Beginning Matrix", 6, 40 );

      // Multiply Matrix1 by Matrix 2.
      myMatrix1->Multiply( myMatrix2, MatrixOrder::Append );

      // Display the result of the multiplication of Matrix1 and
      // Matrix2.
      ListMatrixElements( e, myMatrix1, "Matrix After 1st Multiplication", 6, 60 );

      // Multiply the result from the previous multiplication by
      // Matrix3.
      myMatrix1->Multiply( myMatrix3, MatrixOrder::Append );

      // Display the result of the previous multiplication
      // multiplied by Matrix3.
      ListMatrixElements1( e, myMatrix1, "Matrix After 2nd Multiplication", 6, 80 );

      // Draw the rectangle prior to transformation.
      e->Graphics->DrawRectangle( myPen, 0, 0, 100, 100 );

      // Make the transformation.
      e->Graphics->Transform = myMatrix1;

      // Draw the rectangle after transformation.
      e->Graphics->DrawRectangle( myPen2, 0, 0, 100, 100 );
   }

   //-------------------------------------------------------
   // The following function is a helper function to
   // list the contents of a matrix.
   //-------------------------------------------------------
   void ListMatrixElements1( PaintEventArgs^ e, Matrix^ matrix, String^ matrixName, int numElements, int y )
   {
      // Set up variables for drawing the array
      // of points to the screen.
      int i;
      float x = 20,X = 200;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );

      // Draw the matrix name to the screen.
      e->Graphics->DrawString( String::Concat( matrixName, ":  " ), myFont, myBrush, (float)x, (float)y );

      // Draw the set of path points and types to the screen.
      for ( i = 0; i < numElements; i++ )
      {
         e->Graphics->DrawString( String::Concat( matrix->Elements[ i ], ", " ), myFont, myBrush, (float)X, (float)y );
         X += 30;
      }
   }

public void MultiplyExample(PaintEventArgs e)
{
    Pen myPen = new Pen(Color.Blue, 1);
    Pen myPen2 = new Pen(Color.Red, 1);
             
    // Set up the matrices.
    Matrix myMatrix1 = new Matrix(
        2.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f);  
    
    Matrix myMatrix2 = new Matrix(
        0.0f, 1.0f, -1.0f, 0.0f, 0.0f, 0.0f); 
  
    Matrix myMatrix3 = new Matrix(
        1.0f, 0.0f, 0.0f, 1.0f, 250.0f, 50.0f);  

    // Display the elements of the starting matrix.
    ListMatrixElements(e, myMatrix1, "Beginning Matrix", 6, 40);
             
    // Multiply Matrix1 by Matrix 2.
    myMatrix1.Multiply(myMatrix2, MatrixOrder.Append);
             
    // Display the result of the multiplication of Matrix1 and
             
    // Matrix2.
    ListMatrixElements(e,
        myMatrix1,
        "Matrix After 1st Multiplication",
        6,
        60);
             
    // Multiply the result from the pervious multiplication by
    // Matrix3.
    myMatrix1.Multiply(myMatrix3, MatrixOrder.Append);
             
    // Display the result of the previous multiplication
    // multiplied by Matrix3.
    ListMatrixElements1(e,
        myMatrix1,
        "Matrix After 2nd Multiplication",
        6,
        80);
             
    // Draw the rectangle prior to transformation.
    e.Graphics.DrawRectangle(myPen, 0, 0, 100, 100);
             
    // Make the transformation.
    e.Graphics.Transform = myMatrix1;
             
    // Draw the rectangle after transformation.
    e.Graphics.DrawRectangle(myPen2, 0, 0, 100, 100);
}
             
//-------------------------------------------------------
// The following function is a helper function to
// list the contents of a matrix.
//-------------------------------------------------------
public void ListMatrixElements1(
    PaintEventArgs e,
    Matrix matrix,
    string matrixName,
    int numElements,
    int y)
{
             
    // Set up variables for drawing the array
    // of points to the screen.
    int i;
    float x = 20, X = 200;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
             
    // Draw the matrix name to the screen.
    e.Graphics.DrawString(
        matrixName + ":  ",
        myFont,
        myBrush,
        x,
        y);
             
    // Draw the set of path points and types to the screen.
    for(i=0; i<numElements; i++)
    {
        e.Graphics.DrawString(
            matrix.Elements[i].ToString() + ", ",
            myFont,
            myBrush,
            X,
            y);
        X += 30;
    }
}

Public Sub MultiplyExample(ByVal e As PaintEventArgs)
    Dim myPen As New Pen(Color.Blue, 1)
    Dim myPen2 As New Pen(Color.Red, 1)

    ' Set up the matrices.
    Dim myMatrix1 As New Matrix(2.0F, 0.0F, 0.0F, 1.0F, 0.0F, 0.0F)

    ' Scale.
    Dim myMatrix2 As New Matrix(0.0F, 1.0F, -1.0F, 0.0F, 0.0F, 0.0F)

    ' Rotate 90.
    Dim myMatrix3 As New Matrix(1.0F, 0.0F, 0.0F, 1.0F, 250.0F, 50.0F)

    ' Display the elements of the starting matrix.
    ListMatrixElementsHelper(e, myMatrix1, "Beginning Matrix", 6, 40)

    ' Multiply Matrix1 by Matrix 2.
    myMatrix1.Multiply(myMatrix2, MatrixOrder.Append)

    ' Display the result of the multiplication of Matrix1 and
    ' Matrix2.
    ListMatrixElementsHelper(e, myMatrix1, _
    "Matrix After 1st Multiplication", 6, 60)

    ' Multiply the result from the pervious multiplication by
    ' Matrix3.
    myMatrix1.Multiply(myMatrix3, MatrixOrder.Append)

    ' Display the result of the previous multiplication
    ' multiplied by Matrix3.
    ListMatrixElementsHelper1(e, myMatrix1, _
    "Matrix After 2nd Multiplication", 6, 80)

    ' Draw the rectangle prior to transformation.
    e.Graphics.DrawRectangle(myPen, 0, 0, 100, 100)
    e.Graphics.Transform = myMatrix1

    ' Draw the rectangle after transformation.
    e.Graphics.DrawRectangle(myPen2, 0, 0, 100, 100)
End Sub

' A helper function to list the contents of a matrix.
Public Sub ListMatrixElementsHelper1(ByVal e As PaintEventArgs, _
ByVal matrix As Matrix, ByVal matrixName As String, ByVal numElements As Integer, _
ByVal y As Integer)

    ' Set up variables for drawing the array

    ' of points to the screen.
    Dim i As Integer
    Dim x As Single = 20
    Dim j As Single = 200
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)

    ' Draw the matrix name to the screen.
    e.Graphics.DrawString(matrixName + ":  ", myFont, myBrush, x, y)

    ' Draw the set of path points and types to the screen.
    For i = 0 To numElements - 1
        e.Graphics.DrawString(matrix.Elements(i).ToString() + ", ", _
        myFont, myBrush, j, y)
        j += 30
    Next i
End Sub

설명

지정된 순서가 Prepend경우 이 Matrix 앞에 지정된 행렬을 곱합니다. 지정된 순서가 Append경우 이 Matrix 지정된 행렬을 추가된 순서로 곱합니다.