MethodBuilder.GetILGenerator 메서드

참조

정의

네임스페이스:: System.Reflection.Emit

어셈블리:: System.Reflection.Emit.dll

어셈블리:: mscorlib.dll

어셈블리:: netstandard.dll

패키지:: System.Reflection.Emit v4.7.0

중요

일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.

이 메서드에 대한 ILGenerator를 반환합니다.

오버로드

GetILGenerator()	64바이트의 기본 MSIL(Microsoft Intermediate Language) 스트림 크기를 사용하는 이 메서드에 대한 `ILGenerator` 를 반환합니다.
GetILGenerator(Int32)	지정된 MSIL(Microsoft Intermediate Language) 스트림 크기를 사용하여 이 메서드에 대한 `ILGenerator` 를 반환합니다.

GetILGenerator()

Source:: MethodBuilder.cs

Source:: MethodBuilder.cs

Source:: MethodBuilder.cs

64바이트의 기본 MSIL(Microsoft Intermediate Language) 스트림 크기를 사용하는 이 메서드에 대한 ILGenerator 를 반환합니다.

public:
 System::Reflection::Emit::ILGenerator ^ GetILGenerator();

public System.Reflection.Emit.ILGenerator GetILGenerator ();

member this.GetILGenerator : unit -> System.Reflection.Emit.ILGenerator

Public Function GetILGenerator () As ILGenerator

반환

ILGenerator

이 메서드에 대한 ILGenerator 개체를 반환합니다.

예외

InvalidOperationException

이 메서드는 해당 MethodAttributes 또는 MethodImplAttributes 플래그 때문에 본문이 없어야 합니다(예: PinvokeImpl 플래그 포함).

또는

메서드가 제네릭 메서드이지만 제네릭 메서드 정의가 아닌 경우. 즉, IsGenericMethod 속성은 true지만 IsGenericMethodDefinition 속성은 false입니다.

예제

아래 코드 샘플에서는 3D 공간에서 두 점의 GetILGenerator 점 곱을 계산하는 동적 어셈블리를 만들고 내보내는 메서드의 컨텍스트 사용법을 보여 줍니다.

using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ DynamicDotProductGen()
{
   Type^ ivType = nullptr;
   array<Type^>^temp0 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^ctorParams = temp0;
   AppDomain^ myDomain = Thread::GetDomain();
   AssemblyName^ myAsmName = gcnew AssemblyName;
   myAsmName->Name = "IntVectorAsm";
   AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
   ModuleBuilder^ IntVectorModule = myAsmBuilder->DefineDynamicModule( "IntVectorModule", "Vector.dll" );
   TypeBuilder^ ivTypeBld = IntVectorModule->DefineType( "IntVector", TypeAttributes::Public );
   FieldBuilder^ xField = ivTypeBld->DefineField( "x", int::typeid, FieldAttributes::Private );
   FieldBuilder^ yField = ivTypeBld->DefineField( "y", int::typeid, FieldAttributes::Private );
   FieldBuilder^ zField = ivTypeBld->DefineField( "z", int::typeid, FieldAttributes::Private );
   Type^ objType = Type::GetType( "System.Object" );
   ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
   ConstructorBuilder^ ivCtor = ivTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
   ILGenerator^ ctorIL = ivCtor->GetILGenerator();
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Call, objCtor );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_1 );
   ctorIL->Emit( OpCodes::Stfld, xField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_2 );
   ctorIL->Emit( OpCodes::Stfld, yField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_3 );
   ctorIL->Emit( OpCodes::Stfld, zField );
   ctorIL->Emit( OpCodes::Ret );
   
   // This method will find the dot product of the stored vector
   // with another.
   array<Type^>^temp1 = {ivTypeBld};
   array<Type^>^dpParams = temp1;
   
   // Here, you create a MethodBuilder containing the
   // name, the attributes (public, static, private, and so on),
   // the return type (int, in this case), and a array of Type
   // indicating the type of each parameter. Since the sole parameter
   // is a IntVector, the very class you're creating, you will
   // pass in the TypeBuilder (which is derived from Type) instead of
   // a Type object for IntVector, avoiding an exception.
   // -- This method would be declared in C# as:
   //    public int DotProduct(IntVector aVector)
   MethodBuilder^ dotProductMthd = ivTypeBld->DefineMethod( "DotProduct", MethodAttributes::Public, int::typeid, dpParams );
   
   // A ILGenerator can now be spawned, attached to the MethodBuilder.
   ILGenerator^ mthdIL = dotProductMthd->GetILGenerator();
   
   // Here's the body of our function, in MSIL form. We're going to find the
   // "dot product" of the current vector instance with the passed vector
   // instance. For reference purposes, the equation is:
   // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
   // First, you'll load the reference to the current instance "this"
   // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
   // instruction, will pop the reference off the stack and look up the
   // field "x", specified by the FieldInfo token "xField".
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // That completed, the value stored at field "x" is now atop the stack.
   // Now, you'll do the same for the Object reference we passed as a
   // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
   // you'll have the value stored in field "x" for the passed instance
   // atop the stack.
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // There will now be two values atop the stack - the "x" value for the
   // current vector instance, and the "x" value for the passed instance.
   // You'll now multiply them, and push the result onto the evaluation stack.
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Now, repeat this for the "y" fields of both vectors.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // At this time, the results of both multiplications should be atop
   // the stack. You'll now add them and push the result onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // Multiply both "z" field and push the result onto the stack.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Finally, add the result of multiplying the "z" fields with the
   // result of the earlier addition, and push the result - the dot product -
   // onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // The "ret" opcode will pop the last value from the stack and return it
   // to the calling method. You're all done!
   mthdIL->Emit( OpCodes::Ret );
   ivType = ivTypeBld->CreateType();
   return ivType;
}

int main()
{
   Type^ IVType = nullptr;
   Object^ aVector1 = nullptr;
   Object^ aVector2 = nullptr;
   array<Type^>^temp2 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^aVtypes = temp2;
   array<Object^>^temp3 = {10,10,10};
   array<Object^>^aVargs1 = temp3;
   array<Object^>^temp4 = {20,20,20};
   array<Object^>^aVargs2 = temp4;
   
   // Call the  method to build our dynamic class.
   IVType = DynamicDotProductGen();
   Console::WriteLine( "---" );
   ConstructorInfo^ myDTctor = IVType->GetConstructor( aVtypes );
   aVector1 = myDTctor->Invoke( aVargs1 );
   aVector2 = myDTctor->Invoke( aVargs2 );
   array<Object^>^passMe = gcnew array<Object^>(1);
   passMe[ 0 ] = dynamic_cast<Object^>(aVector2);
   Console::WriteLine( "(10, 10, 10) . (20, 20, 20) = {0}", IVType->InvokeMember( "DotProduct", BindingFlags::InvokeMethod, nullptr, aVector1, passMe ) );
}

// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600

using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;

class TestILGenerator
{
    public static Type DynamicDotProductGen()
    {
       Type ivType = null;
       Type[] ctorParams = new Type[] { typeof(int),
                                typeof(int),
                        typeof(int)};
    
       AppDomain myDomain = Thread.GetDomain();
       AssemblyName myAsmName = new AssemblyName();
       myAsmName.Name = "IntVectorAsm";
    
       AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
                      myAsmName,
                      AssemblyBuilderAccess.RunAndSave);

       ModuleBuilder IntVectorModule = myAsmBuilder.DefineDynamicModule("IntVectorModule",
                                        "Vector.dll");

       TypeBuilder ivTypeBld = IntVectorModule.DefineType("IntVector",
                                      TypeAttributes.Public);

       FieldBuilder xField = ivTypeBld.DefineField("x", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder yField = ivTypeBld.DefineField("y", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder zField = ivTypeBld.DefineField("z", typeof(int),
                                                       FieldAttributes.Private);

           Type objType = Type.GetType("System.Object");
           ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);

       ConstructorBuilder ivCtor = ivTypeBld.DefineConstructor(
                      MethodAttributes.Public,
                      CallingConventions.Standard,
                      ctorParams);
       ILGenerator ctorIL = ivCtor.GetILGenerator();
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Call, objCtor);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_1);
           ctorIL.Emit(OpCodes.Stfld, xField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_2);
           ctorIL.Emit(OpCodes.Stfld, yField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_3);
           ctorIL.Emit(OpCodes.Stfld, zField);
       ctorIL.Emit(OpCodes.Ret);

       // This method will find the dot product of the stored vector
       // with another.

       Type[] dpParams = new Type[] { ivTypeBld };

           // Here, you create a MethodBuilder containing the
       // name, the attributes (public, static, private, and so on),
       // the return type (int, in this case), and a array of Type
       // indicating the type of each parameter. Since the sole parameter
       // is a IntVector, the very class you're creating, you will
       // pass in the TypeBuilder (which is derived from Type) instead of
       // a Type object for IntVector, avoiding an exception.

       // -- This method would be declared in C# as:
       //    public int DotProduct(IntVector aVector)

           MethodBuilder dotProductMthd = ivTypeBld.DefineMethod(
                                  "DotProduct",
                          MethodAttributes.Public,
                                          typeof(int),
                                          dpParams);

       // A ILGenerator can now be spawned, attached to the MethodBuilder.

       ILGenerator mthdIL = dotProductMthd.GetILGenerator();
    
       // Here's the body of our function, in MSIL form. We're going to find the
       // "dot product" of the current vector instance with the passed vector
       // instance. For reference purposes, the equation is:
       // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product

       // First, you'll load the reference to the current instance "this"
       // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
       // instruction, will pop the reference off the stack and look up the
       // field "x", specified by the FieldInfo token "xField".

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, xField);

       // That completed, the value stored at field "x" is now atop the stack.
       // Now, you'll do the same for the object reference we passed as a
       // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
       // you'll have the value stored in field "x" for the passed instance
       // atop the stack.

       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, xField);

           // There will now be two values atop the stack - the "x" value for the
       // current vector instance, and the "x" value for the passed instance.
       // You'll now multiply them, and push the result onto the evaluation stack.

       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Now, repeat this for the "y" fields of both vectors.

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // At this time, the results of both multiplications should be atop
       // the stack. You'll now add them and push the result onto the stack.

       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // Multiply both "z" field and push the result onto the stack.
       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Finally, add the result of multiplying the "z" fields with the
       // result of the earlier addition, and push the result - the dot product -
       // onto the stack.
       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // The "ret" opcode will pop the last value from the stack and return it
       // to the calling method. You're all done!

       mthdIL.Emit(OpCodes.Ret);

       ivType = ivTypeBld.CreateType();

       return ivType;
    }

    public static void Main() {
    
       Type IVType = null;
           object aVector1 = null;
           object aVector2 = null;
       Type[] aVtypes = new Type[] {typeof(int), typeof(int), typeof(int)};
           object[] aVargs1 = new object[] {10, 10, 10};
           object[] aVargs2 = new object[] {20, 20, 20};
    
       // Call the  method to build our dynamic class.

       IVType = DynamicDotProductGen();

           Console.WriteLine("---");

       ConstructorInfo myDTctor = IVType.GetConstructor(aVtypes);
       aVector1 = myDTctor.Invoke(aVargs1);
       aVector2 = myDTctor.Invoke(aVargs2);

       object[] passMe = new object[1];
           passMe[0] = (object)aVector2;

       Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}",
                 IVType.InvokeMember("DotProduct",
                          BindingFlags.InvokeMethod,
                          null,
                          aVector1,
                          passMe));

       // +++ OUTPUT +++
       // ---
       // (10, 10, 10) . (20, 20, 20) = 600
    }
}

Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit

 _


Class TestILGenerator
   
   
   Public Shared Function DynamicDotProductGen() As Type
      
      Dim ivType As Type = Nothing
      Dim ctorParams() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      
      Dim myDomain As AppDomain = Thread.GetDomain()
      Dim myAsmName As New AssemblyName()
      myAsmName.Name = "IntVectorAsm"
      
      Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
                        myAsmName, _
                        AssemblyBuilderAccess.RunAndSave)
      
      Dim IntVectorModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule( _
                         "IntVectorModule", _
                         "Vector.dll")
      
      Dim ivTypeBld As TypeBuilder = IntVectorModule.DefineType("IntVector", TypeAttributes.Public)
      
      Dim xField As FieldBuilder = ivTypeBld.DefineField("x", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim yField As FieldBuilder = ivTypeBld.DefineField("y", _ 
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim zField As FieldBuilder = ivTypeBld.DefineField("z", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      
      
      Dim objType As Type = Type.GetType("System.Object")
      Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type() {})
      
      Dim ivCtor As ConstructorBuilder = ivTypeBld.DefineConstructor( _
                     MethodAttributes.Public, _
                     CallingConventions.Standard, _
                     ctorParams)
      Dim ctorIL As ILGenerator = ivCtor.GetILGenerator()
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Call, objCtor)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_1)
      ctorIL.Emit(OpCodes.Stfld, xField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_2)
      ctorIL.Emit(OpCodes.Stfld, yField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_3)
      ctorIL.Emit(OpCodes.Stfld, zField)
      ctorIL.Emit(OpCodes.Ret)
     

      ' Now, you'll construct the method find the dot product of two vectors. First,
      ' let's define the parameters that will be accepted by the method. In this case,
      ' it's an IntVector itself!

      Dim dpParams() As Type = {ivTypeBld}
      
      ' Here, you create a MethodBuilder containing the
      ' name, the attributes (public, static, private, and so on),
      ' the return type (int, in this case), and a array of Type
      ' indicating the type of each parameter. Since the sole parameter
      ' is a IntVector, the very class you're creating, you will
      ' pass in the TypeBuilder (which is derived from Type) instead of 
      ' a Type object for IntVector, avoiding an exception. 
      ' -- This method would be declared in VB.NET as:
      '    Public Function DotProduct(IntVector aVector) As Integer

      Dim dotProductMthd As MethodBuilder = ivTypeBld.DefineMethod("DotProduct", _
                        MethodAttributes.Public, GetType(Integer), _
                                            dpParams)
      
      ' A ILGenerator can now be spawned, attached to the MethodBuilder.
      Dim mthdIL As ILGenerator = dotProductMthd.GetILGenerator()
      
      ' Here's the body of our function, in MSIL form. We're going to find the
      ' "dot product" of the current vector instance with the passed vector 
      ' instance. For reference purposes, the equation is:
      ' (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
      ' First, you'll load the reference to the current instance "this"
      ' stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
      ' instruction, will pop the reference off the stack and look up the
      ' field "x", specified by the FieldInfo token "xField".
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' That completed, the value stored at field "x" is now atop the stack.
      ' Now, you'll do the same for the object reference we passed as a
      ' parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
      ' you'll have the value stored in field "x" for the passed instance
      ' atop the stack.
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' There will now be two values atop the stack - the "x" value for the
      ' current vector instance, and the "x" value for the passed instance.
      ' You'll now multiply them, and push the result onto the evaluation stack.
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Now, repeat this for the "y" fields of both vectors.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' At this time, the results of both multiplications should be atop
      ' the stack. You'll now add them and push the result onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' Multiply both "z" field and push the result onto the stack.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Finally, add the result of multiplying the "z" fields with the
      ' result of the earlier addition, and push the result - the dot product -
      ' onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' The "ret" opcode will pop the last value from the stack and return it
      ' to the calling method. You're all done!
      mthdIL.Emit(OpCodes.Ret)
      
      
      ivType = ivTypeBld.CreateType()
      
      Return ivType
   End Function 'DynamicDotProductGen
    
   
   Public Shared Sub Main()
      
      Dim IVType As Type = Nothing
      Dim aVector1 As Object = Nothing
      Dim aVector2 As Object = Nothing
      Dim aVtypes() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      Dim aVargs1() As Object = {10, 10, 10}
      Dim aVargs2() As Object = {20, 20, 20}
      
      ' Call the  method to build our dynamic class.
      IVType = DynamicDotProductGen()
      
      
      Dim myDTctor As ConstructorInfo = IVType.GetConstructor(aVtypes)
      aVector1 = myDTctor.Invoke(aVargs1)
      aVector2 = myDTctor.Invoke(aVargs2)
      
      Console.WriteLine("---")
      Dim passMe(0) As Object
      passMe(0) = CType(aVector2, Object)
      
      Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}", _
                        IVType.InvokeMember("DotProduct", BindingFlags.InvokeMethod, _
                        Nothing, aVector1, passMe))
   End Sub
End Class



' +++ OUTPUT +++
' ---
' (10, 10, 10) . (20, 20, 20) = 600

적용 대상

GetILGenerator(Int32)

Source:: MethodBuilder.cs

Source:: MethodBuilder.cs

Source:: MethodBuilder.cs

지정된 MSIL(Microsoft Intermediate Language) 스트림 크기를 사용하여 이 메서드에 대한 ILGenerator 를 반환합니다.

public:
 System::Reflection::Emit::ILGenerator ^ GetILGenerator(int size);

public System.Reflection.Emit.ILGenerator GetILGenerator (int size);

member this.GetILGenerator : int -> System.Reflection.Emit.ILGenerator

Public Function GetILGenerator (size As Integer) As ILGenerator

매개 변수

size: Int32

MSIL 스트림에 바이트의 크기입니다.

반환

ILGenerator

이 메서드에 대한 ILGenerator 개체를 반환합니다.

예외

InvalidOperationException

이 메서드는 해당 MethodAttributes 또는 MethodImplAttributes 플래그 때문에 본문이 없어야 합니다(예: PinvokeImpl 플래그 포함).

또는

메서드가 제네릭 메서드이지만 제네릭 메서드 정의가 아닌 경우. 즉, IsGenericMethod 속성은 true지만 IsGenericMethodDefinition 속성은 false입니다.

예제

using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ DynamicDotProductGen()
{
   Type^ ivType = nullptr;
   array<Type^>^temp0 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^ctorParams = temp0;
   AppDomain^ myDomain = Thread::GetDomain();
   AssemblyName^ myAsmName = gcnew AssemblyName;
   myAsmName->Name = "IntVectorAsm";
   AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
   ModuleBuilder^ IntVectorModule = myAsmBuilder->DefineDynamicModule( "IntVectorModule", "Vector.dll" );
   TypeBuilder^ ivTypeBld = IntVectorModule->DefineType( "IntVector", TypeAttributes::Public );
   FieldBuilder^ xField = ivTypeBld->DefineField( "x", int::typeid, FieldAttributes::Private );
   FieldBuilder^ yField = ivTypeBld->DefineField( "y", int::typeid, FieldAttributes::Private );
   FieldBuilder^ zField = ivTypeBld->DefineField( "z", int::typeid, FieldAttributes::Private );
   Type^ objType = Type::GetType( "System.Object" );
   ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
   ConstructorBuilder^ ivCtor = ivTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
   ILGenerator^ ctorIL = ivCtor->GetILGenerator();
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Call, objCtor );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_1 );
   ctorIL->Emit( OpCodes::Stfld, xField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_2 );
   ctorIL->Emit( OpCodes::Stfld, yField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_3 );
   ctorIL->Emit( OpCodes::Stfld, zField );
   ctorIL->Emit( OpCodes::Ret );
   
   // This method will find the dot product of the stored vector
   // with another.
   array<Type^>^temp1 = {ivTypeBld};
   array<Type^>^dpParams = temp1;
   
   // Here, you create a MethodBuilder containing the
   // name, the attributes (public, static, private, and so on),
   // the return type (int, in this case), and a array of Type
   // indicating the type of each parameter. Since the sole parameter
   // is a IntVector, the very class you're creating, you will
   // pass in the TypeBuilder (which is derived from Type) instead of
   // a Type object for IntVector, avoiding an exception.
   // -- This method would be declared in C# as:
   //    public int DotProduct(IntVector aVector)
   MethodBuilder^ dotProductMthd = ivTypeBld->DefineMethod( "DotProduct", MethodAttributes::Public, int::typeid, dpParams );
   
   // A ILGenerator can now be spawned, attached to the MethodBuilder.
   ILGenerator^ mthdIL = dotProductMthd->GetILGenerator();
   
   // Here's the body of our function, in MSIL form. We're going to find the
   // "dot product" of the current vector instance with the passed vector
   // instance. For reference purposes, the equation is:
   // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
   // First, you'll load the reference to the current instance "this"
   // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
   // instruction, will pop the reference off the stack and look up the
   // field "x", specified by the FieldInfo token "xField".
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // That completed, the value stored at field "x" is now atop the stack.
   // Now, you'll do the same for the Object reference we passed as a
   // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
   // you'll have the value stored in field "x" for the passed instance
   // atop the stack.
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // There will now be two values atop the stack - the "x" value for the
   // current vector instance, and the "x" value for the passed instance.
   // You'll now multiply them, and push the result onto the evaluation stack.
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Now, repeat this for the "y" fields of both vectors.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // At this time, the results of both multiplications should be atop
   // the stack. You'll now add them and push the result onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // Multiply both "z" field and push the result onto the stack.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Finally, add the result of multiplying the "z" fields with the
   // result of the earlier addition, and push the result - the dot product -
   // onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // The "ret" opcode will pop the last value from the stack and return it
   // to the calling method. You're all done!
   mthdIL->Emit( OpCodes::Ret );
   ivType = ivTypeBld->CreateType();
   return ivType;
}

int main()
{
   Type^ IVType = nullptr;
   Object^ aVector1 = nullptr;
   Object^ aVector2 = nullptr;
   array<Type^>^temp2 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^aVtypes = temp2;
   array<Object^>^temp3 = {10,10,10};
   array<Object^>^aVargs1 = temp3;
   array<Object^>^temp4 = {20,20,20};
   array<Object^>^aVargs2 = temp4;
   
   // Call the  method to build our dynamic class.
   IVType = DynamicDotProductGen();
   Console::WriteLine( "---" );
   ConstructorInfo^ myDTctor = IVType->GetConstructor( aVtypes );
   aVector1 = myDTctor->Invoke( aVargs1 );
   aVector2 = myDTctor->Invoke( aVargs2 );
   array<Object^>^passMe = gcnew array<Object^>(1);
   passMe[ 0 ] = dynamic_cast<Object^>(aVector2);
   Console::WriteLine( "(10, 10, 10) . (20, 20, 20) = {0}", IVType->InvokeMember( "DotProduct", BindingFlags::InvokeMethod, nullptr, aVector1, passMe ) );
}

// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600

using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;

class TestILGenerator
{
    public static Type DynamicDotProductGen()
    {
       Type ivType = null;
       Type[] ctorParams = new Type[] { typeof(int),
                                typeof(int),
                        typeof(int)};
    
       AppDomain myDomain = Thread.GetDomain();
       AssemblyName myAsmName = new AssemblyName();
       myAsmName.Name = "IntVectorAsm";
    
       AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
                      myAsmName,
                      AssemblyBuilderAccess.RunAndSave);

       ModuleBuilder IntVectorModule = myAsmBuilder.DefineDynamicModule("IntVectorModule",
                                        "Vector.dll");

       TypeBuilder ivTypeBld = IntVectorModule.DefineType("IntVector",
                                      TypeAttributes.Public);

       FieldBuilder xField = ivTypeBld.DefineField("x", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder yField = ivTypeBld.DefineField("y", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder zField = ivTypeBld.DefineField("z", typeof(int),
                                                       FieldAttributes.Private);

           Type objType = Type.GetType("System.Object");
           ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);

       ConstructorBuilder ivCtor = ivTypeBld.DefineConstructor(
                      MethodAttributes.Public,
                      CallingConventions.Standard,
                      ctorParams);
       ILGenerator ctorIL = ivCtor.GetILGenerator();
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Call, objCtor);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_1);
           ctorIL.Emit(OpCodes.Stfld, xField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_2);
           ctorIL.Emit(OpCodes.Stfld, yField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_3);
           ctorIL.Emit(OpCodes.Stfld, zField);
       ctorIL.Emit(OpCodes.Ret);

       // This method will find the dot product of the stored vector
       // with another.

       Type[] dpParams = new Type[] { ivTypeBld };

           // Here, you create a MethodBuilder containing the
       // name, the attributes (public, static, private, and so on),
       // the return type (int, in this case), and a array of Type
       // indicating the type of each parameter. Since the sole parameter
       // is a IntVector, the very class you're creating, you will
       // pass in the TypeBuilder (which is derived from Type) instead of
       // a Type object for IntVector, avoiding an exception.

       // -- This method would be declared in C# as:
       //    public int DotProduct(IntVector aVector)

           MethodBuilder dotProductMthd = ivTypeBld.DefineMethod(
                                  "DotProduct",
                          MethodAttributes.Public,
                                          typeof(int),
                                          dpParams);

       // A ILGenerator can now be spawned, attached to the MethodBuilder.

       ILGenerator mthdIL = dotProductMthd.GetILGenerator();
    
       // Here's the body of our function, in MSIL form. We're going to find the
       // "dot product" of the current vector instance with the passed vector
       // instance. For reference purposes, the equation is:
       // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product

       // First, you'll load the reference to the current instance "this"
       // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
       // instruction, will pop the reference off the stack and look up the
       // field "x", specified by the FieldInfo token "xField".

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, xField);

       // That completed, the value stored at field "x" is now atop the stack.
       // Now, you'll do the same for the object reference we passed as a
       // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
       // you'll have the value stored in field "x" for the passed instance
       // atop the stack.

       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, xField);

           // There will now be two values atop the stack - the "x" value for the
       // current vector instance, and the "x" value for the passed instance.
       // You'll now multiply them, and push the result onto the evaluation stack.

       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Now, repeat this for the "y" fields of both vectors.

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // At this time, the results of both multiplications should be atop
       // the stack. You'll now add them and push the result onto the stack.

       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // Multiply both "z" field and push the result onto the stack.
       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Finally, add the result of multiplying the "z" fields with the
       // result of the earlier addition, and push the result - the dot product -
       // onto the stack.
       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // The "ret" opcode will pop the last value from the stack and return it
       // to the calling method. You're all done!

       mthdIL.Emit(OpCodes.Ret);

       ivType = ivTypeBld.CreateType();

       return ivType;
    }

    public static void Main() {
    
       Type IVType = null;
           object aVector1 = null;
           object aVector2 = null;
       Type[] aVtypes = new Type[] {typeof(int), typeof(int), typeof(int)};
           object[] aVargs1 = new object[] {10, 10, 10};
           object[] aVargs2 = new object[] {20, 20, 20};
    
       // Call the  method to build our dynamic class.

       IVType = DynamicDotProductGen();

           Console.WriteLine("---");

       ConstructorInfo myDTctor = IVType.GetConstructor(aVtypes);
       aVector1 = myDTctor.Invoke(aVargs1);
       aVector2 = myDTctor.Invoke(aVargs2);

       object[] passMe = new object[1];
           passMe[0] = (object)aVector2;

       Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}",
                 IVType.InvokeMember("DotProduct",
                          BindingFlags.InvokeMethod,
                          null,
                          aVector1,
                          passMe));

       // +++ OUTPUT +++
       // ---
       // (10, 10, 10) . (20, 20, 20) = 600
    }
}

Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit

 _


Class TestILGenerator
   
   
   Public Shared Function DynamicDotProductGen() As Type
      
      Dim ivType As Type = Nothing
      Dim ctorParams() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      
      Dim myDomain As AppDomain = Thread.GetDomain()
      Dim myAsmName As New AssemblyName()
      myAsmName.Name = "IntVectorAsm"
      
      Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
                        myAsmName, _
                        AssemblyBuilderAccess.RunAndSave)
      
      Dim IntVectorModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule( _
                         "IntVectorModule", _
                         "Vector.dll")
      
      Dim ivTypeBld As TypeBuilder = IntVectorModule.DefineType("IntVector", TypeAttributes.Public)
      
      Dim xField As FieldBuilder = ivTypeBld.DefineField("x", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim yField As FieldBuilder = ivTypeBld.DefineField("y", _ 
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim zField As FieldBuilder = ivTypeBld.DefineField("z", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      
      
      Dim objType As Type = Type.GetType("System.Object")
      Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type() {})
      
      Dim ivCtor As ConstructorBuilder = ivTypeBld.DefineConstructor( _
                     MethodAttributes.Public, _
                     CallingConventions.Standard, _
                     ctorParams)
      Dim ctorIL As ILGenerator = ivCtor.GetILGenerator()
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Call, objCtor)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_1)
      ctorIL.Emit(OpCodes.Stfld, xField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_2)
      ctorIL.Emit(OpCodes.Stfld, yField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_3)
      ctorIL.Emit(OpCodes.Stfld, zField)
      ctorIL.Emit(OpCodes.Ret)
     

      ' Now, you'll construct the method find the dot product of two vectors. First,
      ' let's define the parameters that will be accepted by the method. In this case,
      ' it's an IntVector itself!

      Dim dpParams() As Type = {ivTypeBld}
      
      ' Here, you create a MethodBuilder containing the
      ' name, the attributes (public, static, private, and so on),
      ' the return type (int, in this case), and a array of Type
      ' indicating the type of each parameter. Since the sole parameter
      ' is a IntVector, the very class you're creating, you will
      ' pass in the TypeBuilder (which is derived from Type) instead of 
      ' a Type object for IntVector, avoiding an exception. 
      ' -- This method would be declared in VB.NET as:
      '    Public Function DotProduct(IntVector aVector) As Integer

      Dim dotProductMthd As MethodBuilder = ivTypeBld.DefineMethod("DotProduct", _
                        MethodAttributes.Public, GetType(Integer), _
                                            dpParams)
      
      ' A ILGenerator can now be spawned, attached to the MethodBuilder.
      Dim mthdIL As ILGenerator = dotProductMthd.GetILGenerator()
      
      ' Here's the body of our function, in MSIL form. We're going to find the
      ' "dot product" of the current vector instance with the passed vector 
      ' instance. For reference purposes, the equation is:
      ' (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
      ' First, you'll load the reference to the current instance "this"
      ' stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
      ' instruction, will pop the reference off the stack and look up the
      ' field "x", specified by the FieldInfo token "xField".
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' That completed, the value stored at field "x" is now atop the stack.
      ' Now, you'll do the same for the object reference we passed as a
      ' parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
      ' you'll have the value stored in field "x" for the passed instance
      ' atop the stack.
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' There will now be two values atop the stack - the "x" value for the
      ' current vector instance, and the "x" value for the passed instance.
      ' You'll now multiply them, and push the result onto the evaluation stack.
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Now, repeat this for the "y" fields of both vectors.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' At this time, the results of both multiplications should be atop
      ' the stack. You'll now add them and push the result onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' Multiply both "z" field and push the result onto the stack.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Finally, add the result of multiplying the "z" fields with the
      ' result of the earlier addition, and push the result - the dot product -
      ' onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' The "ret" opcode will pop the last value from the stack and return it
      ' to the calling method. You're all done!
      mthdIL.Emit(OpCodes.Ret)
      
      
      ivType = ivTypeBld.CreateType()
      
      Return ivType
   End Function 'DynamicDotProductGen
    
   
   Public Shared Sub Main()
      
      Dim IVType As Type = Nothing
      Dim aVector1 As Object = Nothing
      Dim aVector2 As Object = Nothing
      Dim aVtypes() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      Dim aVargs1() As Object = {10, 10, 10}
      Dim aVargs2() As Object = {20, 20, 20}
      
      ' Call the  method to build our dynamic class.
      IVType = DynamicDotProductGen()
      
      
      Dim myDTctor As ConstructorInfo = IVType.GetConstructor(aVtypes)
      aVector1 = myDTctor.Invoke(aVargs1)
      aVector2 = myDTctor.Invoke(aVargs2)
      
      Console.WriteLine("---")
      Dim passMe(0) As Object
      passMe(0) = CType(aVector2, Object)
      
      Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}", _
                        IVType.InvokeMember("DotProduct", BindingFlags.InvokeMethod, _
                        Nothing, aVector1, passMe))
   End Sub
End Class



' +++ OUTPUT +++
' ---
' (10, 10, 10) . (20, 20, 20) = 600

적용 대상

다음을 통해 공유

MethodBuilder.GetILGenerator 메서드

정의

오버로드

GetILGenerator()

반환

예외

예제

적용 대상

GetILGenerator(Int32)

매개 변수

반환

예외

예제

적용 대상

추가 리소스