FileSecurity 클래스
정의
중요
일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.
파일에 대한 액세스 제어 및 감사 보안을 나타냅니다. 이 클래스는 상속될 수 없습니다.
public ref class FileSecurity sealed : System::Security::AccessControl::FileSystemSecurity
public sealed class FileSecurity : System.Security.AccessControl.FileSystemSecurity
[System.Security.SecurityCritical]
public sealed class FileSecurity : System.Security.AccessControl.FileSystemSecurity
type FileSecurity = class
inherit FileSystemSecurity
[<System.Security.SecurityCritical>]
type FileSecurity = class
inherit FileSystemSecurity
Public NotInheritable Class FileSecurity
Inherits FileSystemSecurity
- 상속
- 특성
예제
다음 코드 예제에서는 클래스를 FileSecurity 사용하여 파일에서 ACL(액세스 제어 목록) 항목을 추가한 다음 제거합니다. 이 예제를 실행하려면 유효한 사용자 또는 그룹 계정을 제공해야 합니다.
using namespace System;
using namespace System::IO;
using namespace System::Security::AccessControl;
// Adds an ACL entry on the specified file for the specified account.
void AddFileSecurity(String^ fileName, String^ account,
FileSystemRights rights, AccessControlType controlType)
{
// Get a FileSecurity object that represents the
// current security settings.
FileSecurity^ fSecurity = File::GetAccessControl(fileName);
// Add the FileSystemAccessRule to the security settings.
fSecurity->AddAccessRule(gcnew FileSystemAccessRule
(account,rights, controlType));
// Set the new access settings.
File::SetAccessControl(fileName, fSecurity);
}
// Removes an ACL entry on the specified file for the specified account.
void RemoveFileSecurity(String^ fileName, String^ account,
FileSystemRights rights, AccessControlType controlType)
{
// Get a FileSecurity object that represents the
// current security settings.
FileSecurity^ fSecurity = File::GetAccessControl(fileName);
// Remove the FileSystemAccessRule from the security settings.
fSecurity->RemoveAccessRule(gcnew FileSystemAccessRule
(account,rights, controlType));
// Set the new access settings.
File::SetAccessControl(fileName, fSecurity);
}
int main()
{
try
{
String^ fileName = "test.xml";
Console::WriteLine("Adding access control entry for " + fileName);
// Add the access control entry to the file.
AddFileSecurity(fileName, "MYDOMAIN\\MyAccount",
FileSystemRights::ReadData, AccessControlType::Allow);
Console::WriteLine("Removing access control entry from " + fileName);
// Remove the access control entry from the file.
RemoveFileSecurity(fileName, "MYDOMAIN\\MyAccount",
FileSystemRights::ReadData, AccessControlType::Allow);
Console::WriteLine("Done.");
}
catch (Exception^ ex)
{
Console::WriteLine(ex->Message);
}
}
using System;
using System.IO;
using System.Security.AccessControl;
namespace FileSystemExample
{
class FileExample
{
public static void Main()
{
try
{
string fileName = "test.xml";
Console.WriteLine("Adding access control entry for "
+ fileName);
// Add the access control entry to the file.
AddFileSecurity(fileName, @"DomainName\AccountName",
FileSystemRights.ReadData, AccessControlType.Allow);
Console.WriteLine("Removing access control entry from "
+ fileName);
// Remove the access control entry from the file.
RemoveFileSecurity(fileName, @"DomainName\AccountName",
FileSystemRights.ReadData, AccessControlType.Allow);
Console.WriteLine("Done.");
}
catch (Exception e)
{
Console.WriteLine(e);
}
}
// Adds an ACL entry on the specified file for the specified account.
public static void AddFileSecurity(string fileName, string account,
FileSystemRights rights, AccessControlType controlType)
{
// Get a FileSecurity object that represents the
// current security settings.
FileSecurity fSecurity = File.GetAccessControl(fileName);
// Add the FileSystemAccessRule to the security settings.
fSecurity.AddAccessRule(new FileSystemAccessRule(account,
rights, controlType));
// Set the new access settings.
File.SetAccessControl(fileName, fSecurity);
}
// Removes an ACL entry on the specified file for the specified account.
public static void RemoveFileSecurity(string fileName, string account,
FileSystemRights rights, AccessControlType controlType)
{
// Get a FileSecurity object that represents the
// current security settings.
FileSecurity fSecurity = File.GetAccessControl(fileName);
// Remove the FileSystemAccessRule from the security settings.
fSecurity.RemoveAccessRule(new FileSystemAccessRule(account,
rights, controlType));
// Set the new access settings.
File.SetAccessControl(fileName, fSecurity);
}
}
}
Imports System.IO
Imports System.Security.AccessControl
Module FileExample
Sub Main()
Try
Dim fileName As String = "test.xml"
Console.WriteLine("Adding access control entry for " & fileName)
' Add the access control entry to the file.
AddFileSecurity(fileName, "DomainName\AccountName", _
FileSystemRights.ReadData, AccessControlType.Allow)
Console.WriteLine("Removing access control entry from " & fileName)
' Remove the access control entry from the file.
RemoveFileSecurity(fileName, "DomainName\AccountName", _
FileSystemRights.ReadData, AccessControlType.Allow)
Console.WriteLine("Done.")
Catch e As Exception
Console.WriteLine(e)
End Try
End Sub
' Adds an ACL entry on the specified file for the specified account.
Sub AddFileSecurity(ByVal fileName As String, ByVal account As String, _
ByVal rights As FileSystemRights, ByVal controlType As AccessControlType)
' Get a FileSecurity object that represents the
' current security settings.
Dim fSecurity As FileSecurity = File.GetAccessControl(fileName)
' Add the FileSystemAccessRule to the security settings.
Dim accessRule As FileSystemAccessRule = _
New FileSystemAccessRule(account, rights, controlType)
fSecurity.AddAccessRule(accessRule)
' Set the new access settings.
File.SetAccessControl(fileName, fSecurity)
End Sub
' Removes an ACL entry on the specified file for the specified account.
Sub RemoveFileSecurity(ByVal fileName As String, ByVal account As String, _
ByVal rights As FileSystemRights, ByVal controlType As AccessControlType)
' Get a FileSecurity object that represents the
' current security settings.
Dim fSecurity As FileSecurity = File.GetAccessControl(fileName)
' Remove the FileSystemAccessRule from the security settings.
fSecurity.RemoveAccessRule(New FileSystemAccessRule(account, _
rights, controlType))
' Set the new access settings.
File.SetAccessControl(fileName, fSecurity)
End Sub
End Module
설명
클래스는 FileSecurity 시스템 파일에 대한 액세스 권한 및 액세스 시도를 감사하는 방법을 지정합니다. 이 클래스는 권한을 액세스 및 감사 규칙의 집합으로 나타냅니다. 각 액세스 규칙은 개체로 FileSystemAccessRule 표현되고 각 감사 규칙은 개체로 FileSystemAuditRule 표시됩니다.
FileSecurity 클래스 기본 Microsoft Windows 파일 보안 시스템의 추상화입니다. 이 시스템에서 각 파일에는 파일에 대한 액세스를 제어하는 DACL(임의 액세스 제어 목록)과 감사되는 액세스 제어 시도를 지정하는 SACL(시스템 액세스 제어 목록)이 있습니다. 클래스 및 FileSystemAuditRule 클래스는 FileSystemAccessRule DACL 및 SACL을 구성하는 ACE(액세스 제어 항목)의 추상화입니다.
클래스는 FileSecurity DACL 및 SACL의 많은 세부 정보를 숨깁니다. ACE 순서 또는 null DACLS에 대해 걱정할 필요가 없습니다.
클래스를 사용하여 파일의 FileSecurity DACL 및 SACL을 나타내는 액세스 규칙을 검색, 추가 또는 변경합니다.
파일에 대한 새 액세스 또는 변경된 액세스 또는 감사 규칙을 유지하려면 이 메서드를 SetAccessControl 사용합니다. 기존 파일에서 액세스 또는 감사 규칙을 검색하려면 GetAccessControl 메서드를 사용합니다.
생성자
FileSecurity() |
FileSecurity 클래스의 새 인스턴스를 초기화합니다. |
FileSecurity(String, AccessControlSections) |
FileSecurity 열거형의 지정된 값을 사용하여 지정된 파일에서 AccessControlSections 클래스의 새 인스턴스를 초기화합니다. |
속성
AccessRightType |
FileSystemSecurity 클래스가 액세스 권한을 나타내는 데 사용하는 열거형을 가져옵니다. (다음에서 상속됨 FileSystemSecurity) |
AccessRulesModified |
이 ObjectSecurity 개체와 관련된 액세스 규칙이 수정되었는지 여부를 지정하는 부울 값을 가져오거나 설정합니다. (다음에서 상속됨 ObjectSecurity) |
AccessRuleType |
FileSystemSecurity 클래스에서 액세스 규칙을 나타내는 데 사용하는 열거형을 가져옵니다. (다음에서 상속됨 FileSystemSecurity) |
AreAccessRulesCanonical |
이 ObjectSecurity 개체와 관련된 액세스 규칙이 정식 순서대로 되어 있는지 여부를 지정하는 부울 값을 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
AreAccessRulesProtected |
이 ObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)이 보호되는지 여부를 지정하는 부울 값을 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
AreAuditRulesCanonical |
이 ObjectSecurity 개체와 관련된 감사 규칙이 정식 순서대로 되어 있는지 여부를 지정하는 부울 값을 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
AreAuditRulesProtected |
이 ObjectSecurity 개체와 관련된 SACL(시스템 액세스 제어 목록)이 보호되는지 여부를 지정하는 부울 값을 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
AuditRulesModified |
이 ObjectSecurity 개체와 관련된 감사 규칙이 수정되었는지 여부를 지정하는 부울 값을 가져오거나 설정합니다. (다음에서 상속됨 ObjectSecurity) |
AuditRuleType |
FileSystemSecurity 클래스에서 감사 규칙을 나타내는 데 사용하는 형식을 가져옵니다. (다음에서 상속됨 FileSystemSecurity) |
GroupModified |
보안 가능한 개체와 관련된 그룹이 수정되었는지 여부를 지정하는 부울 값을 가져오거나 설정합니다. (다음에서 상속됨 ObjectSecurity) |
IsContainer |
이 ObjectSecurity 개체가 컨테이너 개체인지 여부를 지정하는 부울 값을 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
IsDS |
이 ObjectSecurity 개체가 디렉터리 개체인지 여부를 지정하는 부울 값을 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
OwnerModified |
보안 가능한 개체의 소유자가 수정되었는지 여부를 지정하는 부울 값을 가져오거나 설정합니다. (다음에서 상속됨 ObjectSecurity) |
SecurityDescriptor |
이 인스턴스의 보안 설명자를 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
메서드
AccessRuleFactory(IdentityReference, Int32, Boolean, InheritanceFlags, PropagationFlags, AccessControlType) |
지정된 액세스 권한, 액세스 제어 및 플래그를 사용하여 지정된 사용자에 대한 새 액세스 제어 규칙을 나타내는 FileSystemAccessRule 클래스의 새 인스턴스를 초기화합니다. (다음에서 상속됨 FileSystemSecurity) |
AddAccessRule(AccessRule) |
지정한 액세스 규칙을 이 CommonObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)에 추가합니다. (다음에서 상속됨 CommonObjectSecurity) |
AddAccessRule(FileSystemAccessRule) |
지정된 ACL(액세스 제어 목록) 권한을 현재 파일이나 디렉터리에 추가합니다. (다음에서 상속됨 FileSystemSecurity) |
AddAuditRule(AuditRule) |
지정한 감사 규칙을 이 CommonObjectSecurity 개체와 관련된 SACL(시스템 액세스 제어 목록)에 추가합니다. (다음에서 상속됨 CommonObjectSecurity) |
AddAuditRule(FileSystemAuditRule) |
지정된 감사 규칙을 현재 파일이나 디렉터리에 추가합니다. (다음에서 상속됨 FileSystemSecurity) |
AuditRuleFactory(IdentityReference, Int32, Boolean, InheritanceFlags, PropagationFlags, AuditFlags) |
지정된 사용자에 대한 지정된 감사 규칙을 나타내는 FileSystemAuditRule 클래스의 새 인스턴스를 초기화합니다. (다음에서 상속됨 FileSystemSecurity) |
Equals(Object) |
지정된 개체가 현재 개체와 같은지 확인합니다. (다음에서 상속됨 Object) |
GetAccessRules(Boolean, Boolean, Type) |
지정된 보안 식별자와 관련된 액세스 규칙 컬렉션을 가져옵니다. (다음에서 상속됨 CommonObjectSecurity) |
GetAuditRules(Boolean, Boolean, Type) |
지정된 보안 식별자와 관련된 감사 규칙 컬렉션을 가져옵니다. (다음에서 상속됨 CommonObjectSecurity) |
GetGroup(Type) |
지정된 소유자와 관련된 주 그룹을 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
GetHashCode() |
기본 해시 함수로 작동합니다. (다음에서 상속됨 Object) |
GetOwner(Type) |
지정된 주 그룹과 관련된 소유자를 가져옵니다. (다음에서 상속됨 ObjectSecurity) |
GetSecurityDescriptorBinaryForm() |
이 ObjectSecurity 개체의 보안 설명자 정보를 나타내는 바이트 값 배열을 반환합니다. (다음에서 상속됨 ObjectSecurity) |
GetSecurityDescriptorSddlForm(AccessControlSections) |
이 ObjectSecurity 개체와 관련된 지정된 보안 설명자 섹션의 SDDL(Security Descriptor Definition Language) 표현을 반환합니다. (다음에서 상속됨 ObjectSecurity) |
GetType() |
현재 인스턴스의 Type을 가져옵니다. (다음에서 상속됨 Object) |
MemberwiseClone() |
현재 Object의 단순 복사본을 만듭니다. (다음에서 상속됨 Object) |
ModifyAccess(AccessControlModification, AccessRule, Boolean) |
지정된 수정 사항을 이 CommonObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)에 적용합니다. (다음에서 상속됨 CommonObjectSecurity) |
ModifyAccessRule(AccessControlModification, AccessRule, Boolean) |
지정된 수정 사항을 이 ObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)에 적용합니다. (다음에서 상속됨 ObjectSecurity) |
ModifyAudit(AccessControlModification, AuditRule, Boolean) |
지정된 수정 사항을 이 CommonObjectSecurity 개체와 관련된 SACL(시스템 액세스 제어 목록)에 적용합니다. (다음에서 상속됨 CommonObjectSecurity) |
ModifyAuditRule(AccessControlModification, AuditRule, Boolean) |
지정된 수정 사항을 이 ObjectSecurity 개체와 관련된 SACL(시스템 액세스 제어 목록)에 적용합니다. (다음에서 상속됨 ObjectSecurity) |
Persist(Boolean, String, AccessControlSections) |
이 ObjectSecurity 개체와 연결된 보안 설명자의 지정된 섹션을 영구 스토리지에 저장합니다. 생성자와 persist 메서드에는 동일한 |
Persist(SafeHandle, AccessControlSections) |
이 NativeObjectSecurity 개체와 연결된 보안 설명자의 지정된 섹션을 영구 스토리지에 저장합니다. 생성자와 persist 메서드에는 동일한 |
Persist(SafeHandle, AccessControlSections, Object) |
이 NativeObjectSecurity 개체와 연결된 보안 설명자의 지정된 섹션을 영구 스토리지에 저장합니다. 생성자와 persist 메서드에는 동일한 |
Persist(String, AccessControlSections) |
이 NativeObjectSecurity 개체와 연결된 보안 설명자의 지정된 섹션을 영구 스토리지에 저장합니다. 생성자와 persist 메서드에는 동일한 |
Persist(String, AccessControlSections, Object) |
이 NativeObjectSecurity 개체와 연결된 보안 설명자의 지정된 섹션을 영구 스토리지에 저장합니다. 생성자와 persist 메서드에는 동일한 |
PurgeAccessRules(IdentityReference) |
지정된 IdentityReference와 관련된 모든 액세스 규칙을 제거합니다. (다음에서 상속됨 ObjectSecurity) |
PurgeAuditRules(IdentityReference) |
지정된 IdentityReference와 관련된 모든 감사 규칙을 제거합니다. (다음에서 상속됨 ObjectSecurity) |
ReadLock() |
이 ObjectSecurity 개체에 대한 읽기 액세스를 잠급니다. (다음에서 상속됨 ObjectSecurity) |
ReadUnlock() |
이 ObjectSecurity 개체에 대한 읽기 액세스의 잠금을 해제합니다. (다음에서 상속됨 ObjectSecurity) |
RemoveAccessRule(AccessRule) |
이 CommonObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)에서 지정한 액세스 규칙과 동일한 보안 식별자 및 액세스 마스크가 들어 있는 액세스 규칙을 제거합니다. (다음에서 상속됨 CommonObjectSecurity) |
RemoveAccessRule(FileSystemAccessRule) |
현재 파일이나 디렉터리에서 일치하는 모든 허용/거부 ACL(액세스 제어 목록) 권한을 제거합니다. (다음에서 상속됨 FileSystemSecurity) |
RemoveAccessRuleAll(AccessRule) |
이 CommonObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)에서 지정한 액세스 규칙과 동일한 보안 식별자가 있는 모든 액세스 규칙을 제거합니다. (다음에서 상속됨 CommonObjectSecurity) |
RemoveAccessRuleAll(FileSystemAccessRule) |
현재 파일이나 디렉터리에서 지정된 사용자의 모든 ACL(액세스 제어 목록) 권한을 제거합니다. (다음에서 상속됨 FileSystemSecurity) |
RemoveAccessRuleSpecific(AccessRule) |
이 CommonObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)에서 지정한 액세스 규칙과 정확히 일치하는 모든 액세스 규칙을 제거합니다. (다음에서 상속됨 CommonObjectSecurity) |
RemoveAccessRuleSpecific(FileSystemAccessRule) |
현재 파일이나 디렉터리에서 일치하는 특정 허용/거부 ACL(액세스 제어 목록) 권한을 제거합니다. (다음에서 상속됨 FileSystemSecurity) |
RemoveAuditRule(AuditRule) |
이 CommonObjectSecurity 개체와 관련된 SACL(시스템 액세스 제어 목록)에서 지정한 감사 규칙과 동일한 보안 식별자 및 액세스 마스크가 들어 있는 감사 규칙을 제거합니다. (다음에서 상속됨 CommonObjectSecurity) |
RemoveAuditRule(FileSystemAuditRule) |
현재 파일이나 디렉터리에서 일치하는 모든 허용/거부 감사 규칙을 제거합니다. (다음에서 상속됨 FileSystemSecurity) |
RemoveAuditRuleAll(AuditRule) |
이 CommonObjectSecurity 개체와 관련된 SACL(시스템 액세스 제어 목록)에서 지정한 감사 규칙과 동일한 보안 식별자가 들어 있는 모든 감사 규칙을 제거합니다. (다음에서 상속됨 CommonObjectSecurity) |
RemoveAuditRuleAll(FileSystemAuditRule) |
현재 파일이나 디렉터리에서 지정된 사용자의 모든 감사 규칙을 제거합니다. (다음에서 상속됨 FileSystemSecurity) |
RemoveAuditRuleSpecific(AuditRule) |
이 CommonObjectSecurity 개체와 관련된 SACL(시스템 액세스 제어 목록)에서 지정한 감사 규칙과 정확히 일치하는 모든 감사 규칙을 제거합니다. (다음에서 상속됨 CommonObjectSecurity) |
RemoveAuditRuleSpecific(FileSystemAuditRule) |
현재 파일이나 디렉터리에서 일치하는 특정 허용/거부 감사 규칙을 제거합니다. (다음에서 상속됨 FileSystemSecurity) |
ResetAccessRule(AccessRule) |
CommonObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)의 모든 액세스 규칙을 제거한 다음 지정한 액세스 규칙을 추가합니다. (다음에서 상속됨 CommonObjectSecurity) |
ResetAccessRule(FileSystemAccessRule) |
지정된 ACL(액세스 제어 목록) 권한을 현재 파일이나 디렉터리에 추가하고 일치하는 모든 ACL 권한을 제거합니다. (다음에서 상속됨 FileSystemSecurity) |
SetAccessRule(AccessRule) |
이 CommonObjectSecurity 개체와 관련된 DACL(임의 액세스 제어 목록)에서 지정한 액세스 규칙과 동일한 보안 식별자 및 한정자가 들어 있는 모든 액세스 규칙을 제거한 다음 지정한 액세스 규칙을 추가합니다. (다음에서 상속됨 CommonObjectSecurity) |
SetAccessRule(FileSystemAccessRule) |
지정된 ACL(액세스 제어 목록) 권한을 현재 파일이나 디렉터리에 설정합니다. (다음에서 상속됨 FileSystemSecurity) |
SetAccessRuleProtection(Boolean, Boolean) |
이 ObjectSecurity 개체와 관련된 액세스 규칙의 보호를 설정하거나 제거합니다. 보호된 액세스 규칙은 부모 개체에서 상속을 통해 수정할 수 없습니다. (다음에서 상속됨 ObjectSecurity) |
SetAuditRule(AuditRule) |
이 CommonObjectSecurity 개체와 관련된 SACL(시스템 액세스 제어 목록)에서 지정한 감사 규칙과 동일한 보안 식별자 및 한정자가 들어 있는 모든 감사 규칙을 제거한 다음 지정한 감사 규칙을 추가합니다. (다음에서 상속됨 CommonObjectSecurity) |
SetAuditRule(FileSystemAuditRule) |
지정된 감사 규칙을 현재 파일이나 디렉터리에 설정합니다. (다음에서 상속됨 FileSystemSecurity) |
SetAuditRuleProtection(Boolean, Boolean) |
이 ObjectSecurity 개체와 관련된 감사 규칙의 보호를 설정하거나 제거합니다. 보호된 감사 규칙은 부모 개체에서 상속을 통해 수정할 수 없습니다. (다음에서 상속됨 ObjectSecurity) |
SetGroup(IdentityReference) |
이 ObjectSecurity 개체와 관련된 보안 설명자의 주 그룹을 설정합니다. (다음에서 상속됨 ObjectSecurity) |
SetOwner(IdentityReference) |
이 ObjectSecurity 개체와 관련된 보안 설명자의 소유자를 설정합니다. (다음에서 상속됨 ObjectSecurity) |
SetSecurityDescriptorBinaryForm(Byte[]) |
지정한 바이트 값 배열에서 이 ObjectSecurity 개체의 보안 설명자를 설정합니다. (다음에서 상속됨 ObjectSecurity) |
SetSecurityDescriptorBinaryForm(Byte[], AccessControlSections) |
지정한 바이트 값 배열에서 이 ObjectSecurity 개체에 대해 지정한 보안 설명자 섹션을 설정합니다. (다음에서 상속됨 ObjectSecurity) |
SetSecurityDescriptorSddlForm(String) |
지정한 SDDL(Security Descriptor Definition Language) 문자열에서 이 ObjectSecurity 개체의 보안 설명자를 설정합니다. (다음에서 상속됨 ObjectSecurity) |
SetSecurityDescriptorSddlForm(String, AccessControlSections) |
지정한 SDDL(Security Descriptor Definition Language) 문자열에서 이 ObjectSecurity 개체에 대해 지정한 보안 설명자 섹션을 설정합니다. (다음에서 상속됨 ObjectSecurity) |
ToString() |
현재 개체를 나타내는 문자열을 반환합니다. (다음에서 상속됨 Object) |
WriteLock() |
이 ObjectSecurity 개체에 대한 쓰기 액세스를 잠급니다. (다음에서 상속됨 ObjectSecurity) |
WriteUnlock() |
이 ObjectSecurity 개체에 대한 쓰기 액세스의 잠금을 해제합니다. (다음에서 상속됨 ObjectSecurity) |