Application.SetUnhandledExceptionMode 메서드

참조

정의

네임스페이스:: System.Windows.Forms

어셈블리:: System.Windows.Forms.dll

중요

일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.

처리되지 않은 예외에 응답하는 방법을 애플리케이션에 지시합니다.

오버로드

SetUnhandledExceptionMode(UnhandledExceptionMode)	처리되지 않은 예외에 응답하는 방법을 애플리케이션에 지시합니다.
SetUnhandledExceptionMode(UnhandledExceptionMode, Boolean)	처리되지 않은 예외에 응답하고 필요에 따라 스레드 관련 동작을 적용하는 방법을 애플리케이션에 지시합니다.

예제

다음 코드 예제에서는 Windows Forms 스레드에서 발생하는 예외 및 다른 스레드에서 발생하는 예외에 대한 이벤트 처리기를 설정합니다. 애플리케이션의 사용자 구성 파일의 설정에 관계없이 모든 예외가 애플리케이션에서 처리되도록 설정합니다 SetUnhandledExceptionMode . 이벤트를 사용하여 UI 스레드 예외를 처리하고 UnhandledException 이벤트를 사용하여 ThreadException 비 UI 스레드 예외를 처리합니다. UnhandledException 애플리케이션이 종료되는 것을 방지할 수 없으므로 이 예제에서는 종료 전에 애플리케이션 이벤트 로그에 오류를 기록하기만 하면 됩니다.

이 예제에서는 클래스에서 두 개의 Button 컨트롤과 button2를 정의한 것으로 가정합니다 button1Form.

   // Creates a class to throw the error.
public:
   ref class ErrorHandler: public System::Windows::Forms::Form
   {
      // Inserts the code to create a form with a button.

      // Programs the button to throw an exception when clicked.
   private:
      void button1_Click( Object^ /*sender*/, System::EventArgs^ /*e*/ )
      {
         throw gcnew ArgumentException( "The parameter was invalid" );
      }

   public:
      static void Main()
      {
         // Creates an instance of the methods that will handle the exception.
         CustomExceptionHandler ^ eh = gcnew CustomExceptionHandler;
         
         // Adds the event handler to the event.
         Application::ThreadException += gcnew ThreadExceptionEventHandler( eh, &Form1::CustomExceptionHandler::OnThreadException );
         
         // Runs the application.
         Application::Run( gcnew ErrorHandler );
      }
   };

   // Creates a class to handle the exception event.
internal:
   ref class CustomExceptionHandler
   {
      // Handles the exception event.
   public:
      void OnThreadException( Object^ /*sender*/, ThreadExceptionEventArgs^ t )
      {
         System::Windows::Forms::DialogResult result = ::DialogResult::Cancel;
         try
         {
            result = this->ShowThreadExceptionDialog( t->Exception );
         }
         catch ( Exception^ ) 
         {
            try
            {
               MessageBox::Show( "Fatal Error", "Fatal Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
            }
            finally
            {
               Application::Exit();
            }
         }
         
         // Exits the program when the user clicks Abort.
         if ( result == ::DialogResult::Abort )
         {
            Application::Exit();
         }
      }

      // Creates the error message and displays it.
   private:
      System::Windows::Forms::DialogResult ShowThreadExceptionDialog( Exception^ e )
      {
         String^ errorMsg = "An error occurred please contact the adminstrator with the following information:\n\n";
         errorMsg = String::Concat( errorMsg, e->Message, "\n\nStack Trace:\n", e->StackTrace );
         return MessageBox::Show( errorMsg, "Application Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
      }
   };

Thread newThread = null;

// Starts the application.
public static void Main(string[] args)
{
    // Add the event handler for handling UI thread exceptions to the event.
    Application.ThreadException += new ThreadExceptionEventHandler(ErrorHandlerForm.Form1_UIThreadException);

    // Set the unhandled exception mode to force all Windows Forms errors to go through
    // our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException);

    // Add the event handler for handling non-UI thread exceptions to the event.
    AppDomain.CurrentDomain.UnhandledException +=
        new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);

    // Runs the application.
    Application.Run(new ErrorHandlerForm());
}

// Programs the button to throw an exception when clicked.
private void button1_Click(object sender, System.EventArgs e)
{
    throw new ArgumentException("The parameter was invalid");
}

// Start a new thread, separate from Windows Forms, that will throw an exception.
private void button2_Click(object sender, System.EventArgs e)
{
    ThreadStart newThreadStart = new ThreadStart(newThread_Execute);
    newThread = new Thread(newThreadStart);
    newThread.Start();
}

// The thread we start up to demonstrate non-UI exception handling.
void newThread_Execute()
{
    throw new Exception("The method or operation is not implemented.");
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
private static void Form1_UIThreadException(object sender, ThreadExceptionEventArgs t)
{
    DialogResult result = DialogResult.Cancel;
    try
    {
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception);
    }
    catch
    {
        try
        {
            MessageBox.Show("Fatal Windows Forms Error",
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }

    // Exits the program when the user clicks Abort.
    if (result == DialogResult.Abort)
        Application.Exit();
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
// NOTE: This exception cannot be kept from terminating the application - it can only
// log the event, and inform the user about it.
private static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
{
    try
    {
        Exception ex = (Exception)e.ExceptionObject;
        string errorMsg = "An application error occurred. Please contact the adminstrator " +
            "with the following information:\n\n";

        // Since we can't prevent the app from terminating, log this to the event log.
        if (!EventLog.SourceExists("ThreadException"))
        {
            EventLog.CreateEventSource("ThreadException", "Application");
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "ThreadException";
        myLog.WriteEntry(errorMsg + ex.Message + "\n\nStack Trace:\n" + ex.StackTrace);
    }
    catch (Exception exc)
    {
        try
        {
            MessageBox.Show("Fatal Non-UI Error",
                "Fatal Non-UI Error. Could not write the error to the event log. Reason: "
                + exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }
}

// Creates the error message and displays it.
private static DialogResult ShowThreadExceptionDialog(string title, Exception e)
{
    string errorMsg = "An application error occurred. Please contact the adminstrator " +
        "with the following information:\n\n";
    errorMsg = errorMsg + e.Message + "\n\nStack Trace:\n" + e.StackTrace;
    return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore,
        MessageBoxIcon.Stop);
}

Private newThread As Thread = Nothing

' Starts the application. 
<SecurityPermission(SecurityAction.Demand, Flags:=SecurityPermissionFlag.ControlAppDomain)> _
Public Shared Sub Main()
    ' Add the event handler for handling UI thread exceptions to the event.
    AddHandler Application.ThreadException, AddressOf ErrorHandlerForm.Form1_UIThreadException

    ' Set the unhandled exception mode to force all Windows Forms errors to go through
    ' our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException)

    ' Add the event handler for handling non-UI thread exceptions to the event. 
    AddHandler AppDomain.CurrentDomain.UnhandledException, AddressOf CurrentDomain_UnhandledException

    ' Runs the application.
    Application.Run(New ErrorHandlerForm())
End Sub


' Programs the button to throw an exception when clicked.
Private Sub button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button1.Click
    Throw New ArgumentException("The parameter was invalid")
End Sub

' Start a new thread, separate from Windows Forms, that will throw an exception.
Private Sub button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button2.Click
    Dim newThreadStart As New ThreadStart(AddressOf newThread_Execute)
    newThread = New Thread(newThreadStart)
    newThread.Start()
End Sub


' The thread we start up to demonstrate non-UI exception handling. 
Sub newThread_Execute()
    Throw New Exception("The method or operation is not implemented.")
End Sub


' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
Private Shared Sub Form1_UIThreadException(ByVal sender As Object, ByVal t As ThreadExceptionEventArgs)
    Dim result As System.Windows.Forms.DialogResult = _
        System.Windows.Forms.DialogResult.Cancel
    Try
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception)
    Catch
        Try
            MessageBox.Show("Fatal Windows Forms Error", _
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try

    ' Exits the program when the user clicks Abort.
    If result = DialogResult.Abort Then
        Application.Exit()
    End If
End Sub

' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
' NOTE: This exception cannot be kept from terminating the application - it can only 
' log the event, and inform the user about it. 
Private Shared Sub CurrentDomain_UnhandledException(ByVal sender As Object, _
ByVal e As UnhandledExceptionEventArgs)
    Try
        Dim ex As Exception = CType(e.ExceptionObject, Exception)
        Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
            "with the following information:" & ControlChars.Lf & ControlChars.Lf

        ' Since we can't prevent the app from terminating, log this to the event log.
        If (Not EventLog.SourceExists("ThreadException")) Then
            EventLog.CreateEventSource("ThreadException", "Application")
        End If

        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog()
        myLog.Source = "ThreadException"
        myLog.WriteEntry((errorMsg + ex.Message & ControlChars.Lf & ControlChars.Lf & _
            "Stack Trace:" & ControlChars.Lf & ex.StackTrace))
    Catch exc As Exception
        Try
            MessageBox.Show("Fatal Non-UI Error", "Fatal Non-UI Error. Could not write the error to the event log. " & _
                "Reason: " & exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try
End Sub


' Creates the error message and displays it.
Private Shared Function ShowThreadExceptionDialog(ByVal title As String, ByVal e As Exception) As DialogResult
    Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
 "with the following information:" & ControlChars.Lf & ControlChars.Lf
    errorMsg = errorMsg & e.Message & ControlChars.Lf & _
 ControlChars.Lf & "Stack Trace:" & ControlChars.Lf & e.StackTrace

    Return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
End Function

SetUnhandledExceptionMode(UnhandledExceptionMode)

처리되지 않은 예외에 응답하는 방법을 애플리케이션에 지시합니다.

public:
 static void SetUnhandledExceptionMode(System::Windows::Forms::UnhandledExceptionMode mode);

public static void SetUnhandledExceptionMode (System.Windows.Forms.UnhandledExceptionMode mode);

static member SetUnhandledExceptionMode : System.Windows.Forms.UnhandledExceptionMode -> unit

Public Shared Sub SetUnhandledExceptionMode (mode As UnhandledExceptionMode)

매개 변수

mode: UnhandledExceptionMode

예외가 catch되지 않고 throw되는 경우 애플리케이션의 동작을 설명하는 UnhandledExceptionMode 값입니다.

예외

InvalidOperationException

애플리케이션에서 창을 처음 만든 후에는 예외 모드를 설정할 수 없습니다.

예제

이 예제에서는 클래스에서 두 개의 Button 컨트롤과 button2를 정의한 것으로 가정합니다 button1Form.

   // Creates a class to throw the error.
public:
   ref class ErrorHandler: public System::Windows::Forms::Form
   {
      // Inserts the code to create a form with a button.

      // Programs the button to throw an exception when clicked.
   private:
      void button1_Click( Object^ /*sender*/, System::EventArgs^ /*e*/ )
      {
         throw gcnew ArgumentException( "The parameter was invalid" );
      }

   public:
      static void Main()
      {
         // Creates an instance of the methods that will handle the exception.
         CustomExceptionHandler ^ eh = gcnew CustomExceptionHandler;
         
         // Adds the event handler to the event.
         Application::ThreadException += gcnew ThreadExceptionEventHandler( eh, &Form1::CustomExceptionHandler::OnThreadException );
         
         // Runs the application.
         Application::Run( gcnew ErrorHandler );
      }
   };

   // Creates a class to handle the exception event.
internal:
   ref class CustomExceptionHandler
   {
      // Handles the exception event.
   public:
      void OnThreadException( Object^ /*sender*/, ThreadExceptionEventArgs^ t )
      {
         System::Windows::Forms::DialogResult result = ::DialogResult::Cancel;
         try
         {
            result = this->ShowThreadExceptionDialog( t->Exception );
         }
         catch ( Exception^ ) 
         {
            try
            {
               MessageBox::Show( "Fatal Error", "Fatal Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
            }
            finally
            {
               Application::Exit();
            }
         }
         
         // Exits the program when the user clicks Abort.
         if ( result == ::DialogResult::Abort )
         {
            Application::Exit();
         }
      }

      // Creates the error message and displays it.
   private:
      System::Windows::Forms::DialogResult ShowThreadExceptionDialog( Exception^ e )
      {
         String^ errorMsg = "An error occurred please contact the adminstrator with the following information:\n\n";
         errorMsg = String::Concat( errorMsg, e->Message, "\n\nStack Trace:\n", e->StackTrace );
         return MessageBox::Show( errorMsg, "Application Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
      }
   };

Thread newThread = null;

// Starts the application.
public static void Main(string[] args)
{
    // Add the event handler for handling UI thread exceptions to the event.
    Application.ThreadException += new ThreadExceptionEventHandler(ErrorHandlerForm.Form1_UIThreadException);

    // Set the unhandled exception mode to force all Windows Forms errors to go through
    // our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException);

    // Add the event handler for handling non-UI thread exceptions to the event.
    AppDomain.CurrentDomain.UnhandledException +=
        new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);

    // Runs the application.
    Application.Run(new ErrorHandlerForm());
}

// Programs the button to throw an exception when clicked.
private void button1_Click(object sender, System.EventArgs e)
{
    throw new ArgumentException("The parameter was invalid");
}

// Start a new thread, separate from Windows Forms, that will throw an exception.
private void button2_Click(object sender, System.EventArgs e)
{
    ThreadStart newThreadStart = new ThreadStart(newThread_Execute);
    newThread = new Thread(newThreadStart);
    newThread.Start();
}

// The thread we start up to demonstrate non-UI exception handling.
void newThread_Execute()
{
    throw new Exception("The method or operation is not implemented.");
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
private static void Form1_UIThreadException(object sender, ThreadExceptionEventArgs t)
{
    DialogResult result = DialogResult.Cancel;
    try
    {
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception);
    }
    catch
    {
        try
        {
            MessageBox.Show("Fatal Windows Forms Error",
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }

    // Exits the program when the user clicks Abort.
    if (result == DialogResult.Abort)
        Application.Exit();
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
// NOTE: This exception cannot be kept from terminating the application - it can only
// log the event, and inform the user about it.
private static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
{
    try
    {
        Exception ex = (Exception)e.ExceptionObject;
        string errorMsg = "An application error occurred. Please contact the adminstrator " +
            "with the following information:\n\n";

        // Since we can't prevent the app from terminating, log this to the event log.
        if (!EventLog.SourceExists("ThreadException"))
        {
            EventLog.CreateEventSource("ThreadException", "Application");
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "ThreadException";
        myLog.WriteEntry(errorMsg + ex.Message + "\n\nStack Trace:\n" + ex.StackTrace);
    }
    catch (Exception exc)
    {
        try
        {
            MessageBox.Show("Fatal Non-UI Error",
                "Fatal Non-UI Error. Could not write the error to the event log. Reason: "
                + exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }
}

// Creates the error message and displays it.
private static DialogResult ShowThreadExceptionDialog(string title, Exception e)
{
    string errorMsg = "An application error occurred. Please contact the adminstrator " +
        "with the following information:\n\n";
    errorMsg = errorMsg + e.Message + "\n\nStack Trace:\n" + e.StackTrace;
    return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore,
        MessageBoxIcon.Stop);
}

Private newThread As Thread = Nothing

' Starts the application. 
<SecurityPermission(SecurityAction.Demand, Flags:=SecurityPermissionFlag.ControlAppDomain)> _
Public Shared Sub Main()
    ' Add the event handler for handling UI thread exceptions to the event.
    AddHandler Application.ThreadException, AddressOf ErrorHandlerForm.Form1_UIThreadException

    ' Set the unhandled exception mode to force all Windows Forms errors to go through
    ' our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException)

    ' Add the event handler for handling non-UI thread exceptions to the event. 
    AddHandler AppDomain.CurrentDomain.UnhandledException, AddressOf CurrentDomain_UnhandledException

    ' Runs the application.
    Application.Run(New ErrorHandlerForm())
End Sub


' Programs the button to throw an exception when clicked.
Private Sub button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button1.Click
    Throw New ArgumentException("The parameter was invalid")
End Sub

' Start a new thread, separate from Windows Forms, that will throw an exception.
Private Sub button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button2.Click
    Dim newThreadStart As New ThreadStart(AddressOf newThread_Execute)
    newThread = New Thread(newThreadStart)
    newThread.Start()
End Sub


' The thread we start up to demonstrate non-UI exception handling. 
Sub newThread_Execute()
    Throw New Exception("The method or operation is not implemented.")
End Sub


' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
Private Shared Sub Form1_UIThreadException(ByVal sender As Object, ByVal t As ThreadExceptionEventArgs)
    Dim result As System.Windows.Forms.DialogResult = _
        System.Windows.Forms.DialogResult.Cancel
    Try
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception)
    Catch
        Try
            MessageBox.Show("Fatal Windows Forms Error", _
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try

    ' Exits the program when the user clicks Abort.
    If result = DialogResult.Abort Then
        Application.Exit()
    End If
End Sub

' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
' NOTE: This exception cannot be kept from terminating the application - it can only 
' log the event, and inform the user about it. 
Private Shared Sub CurrentDomain_UnhandledException(ByVal sender As Object, _
ByVal e As UnhandledExceptionEventArgs)
    Try
        Dim ex As Exception = CType(e.ExceptionObject, Exception)
        Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
            "with the following information:" & ControlChars.Lf & ControlChars.Lf

        ' Since we can't prevent the app from terminating, log this to the event log.
        If (Not EventLog.SourceExists("ThreadException")) Then
            EventLog.CreateEventSource("ThreadException", "Application")
        End If

        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog()
        myLog.Source = "ThreadException"
        myLog.WriteEntry((errorMsg + ex.Message & ControlChars.Lf & ControlChars.Lf & _
            "Stack Trace:" & ControlChars.Lf & ex.StackTrace))
    Catch exc As Exception
        Try
            MessageBox.Show("Fatal Non-UI Error", "Fatal Non-UI Error. Could not write the error to the event log. " & _
                "Reason: " & exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try
End Sub


' Creates the error message and displays it.
Private Shared Function ShowThreadExceptionDialog(ByVal title As String, ByVal e As Exception) As DialogResult
    Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
 "with the following information:" & ControlChars.Lf & ControlChars.Lf
    errorMsg = errorMsg & e.Message & ControlChars.Lf & _
 ControlChars.Lf & "Stack Trace:" & ControlChars.Lf & e.StackTrace

    Return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
End Function

설명

Windows Forms throw된 모든 예외를 catch할 수 없는 경우가 많습니다. 이 메서드를 사용 하 여 Windows Forms 구성 요소에 의해 throw 된 처리 되지 않은 모든 예외를 catch 하 고 작업을 계속할지 여부를 사용자에 게 노출 하 고 실행을 중단할지 애플리케이션을 지시할 수 있습니다.

호출 SetUnhandledExceptionMode 사용 하 여 애플리케이션의 기본 폼을 인스턴스화하기 전에 Run 메서드.

Windows Forms 만들고 소유하지 않은 스레드에서 발생하는 예외를 catch하려면 이벤트 처리기를 사용합니다UnhandledException.

추가 정보

UnhandledExceptionMode

적용 대상

SetUnhandledExceptionMode(UnhandledExceptionMode, Boolean)

처리되지 않은 예외에 응답하고 필요에 따라 스레드 관련 동작을 적용하는 방법을 애플리케이션에 지시합니다.

public:
 static void SetUnhandledExceptionMode(System::Windows::Forms::UnhandledExceptionMode mode, bool threadScope);

public static void SetUnhandledExceptionMode (System.Windows.Forms.UnhandledExceptionMode mode, bool threadScope);

static member SetUnhandledExceptionMode : System.Windows.Forms.UnhandledExceptionMode * bool -> unit

Public Shared Sub SetUnhandledExceptionMode (mode As UnhandledExceptionMode, threadScope As Boolean)

매개 변수

mode: UnhandledExceptionMode

예외가 catch되지 않고 throw되는 경우 애플리케이션의 동작을 설명하는 UnhandledExceptionMode 값입니다.

threadScope: Boolean

스레드 예외 모드를 설정하려면 true이고, 그렇지 않으면 false입니다.

예외

InvalidOperationException

애플리케이션에서 창을 처음 만든 후에는 예외 모드를 설정할 수 없습니다.

예제

이 예제에서는 클래스에서 두 개의 Button 컨트롤과 button2를 정의한 것으로 가정합니다 button1Form.

   // Creates a class to throw the error.
public:
   ref class ErrorHandler: public System::Windows::Forms::Form
   {
      // Inserts the code to create a form with a button.

      // Programs the button to throw an exception when clicked.
   private:
      void button1_Click( Object^ /*sender*/, System::EventArgs^ /*e*/ )
      {
         throw gcnew ArgumentException( "The parameter was invalid" );
      }

   public:
      static void Main()
      {
         // Creates an instance of the methods that will handle the exception.
         CustomExceptionHandler ^ eh = gcnew CustomExceptionHandler;
         
         // Adds the event handler to the event.
         Application::ThreadException += gcnew ThreadExceptionEventHandler( eh, &Form1::CustomExceptionHandler::OnThreadException );
         
         // Runs the application.
         Application::Run( gcnew ErrorHandler );
      }
   };

   // Creates a class to handle the exception event.
internal:
   ref class CustomExceptionHandler
   {
      // Handles the exception event.
   public:
      void OnThreadException( Object^ /*sender*/, ThreadExceptionEventArgs^ t )
      {
         System::Windows::Forms::DialogResult result = ::DialogResult::Cancel;
         try
         {
            result = this->ShowThreadExceptionDialog( t->Exception );
         }
         catch ( Exception^ ) 
         {
            try
            {
               MessageBox::Show( "Fatal Error", "Fatal Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
            }
            finally
            {
               Application::Exit();
            }
         }
         
         // Exits the program when the user clicks Abort.
         if ( result == ::DialogResult::Abort )
         {
            Application::Exit();
         }
      }

      // Creates the error message and displays it.
   private:
      System::Windows::Forms::DialogResult ShowThreadExceptionDialog( Exception^ e )
      {
         String^ errorMsg = "An error occurred please contact the adminstrator with the following information:\n\n";
         errorMsg = String::Concat( errorMsg, e->Message, "\n\nStack Trace:\n", e->StackTrace );
         return MessageBox::Show( errorMsg, "Application Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
      }
   };

Thread newThread = null;

// Starts the application.
public static void Main(string[] args)
{
    // Add the event handler for handling UI thread exceptions to the event.
    Application.ThreadException += new ThreadExceptionEventHandler(ErrorHandlerForm.Form1_UIThreadException);

    // Set the unhandled exception mode to force all Windows Forms errors to go through
    // our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException);

    // Add the event handler for handling non-UI thread exceptions to the event.
    AppDomain.CurrentDomain.UnhandledException +=
        new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);

    // Runs the application.
    Application.Run(new ErrorHandlerForm());
}

// Programs the button to throw an exception when clicked.
private void button1_Click(object sender, System.EventArgs e)
{
    throw new ArgumentException("The parameter was invalid");
}

// Start a new thread, separate from Windows Forms, that will throw an exception.
private void button2_Click(object sender, System.EventArgs e)
{
    ThreadStart newThreadStart = new ThreadStart(newThread_Execute);
    newThread = new Thread(newThreadStart);
    newThread.Start();
}

// The thread we start up to demonstrate non-UI exception handling.
void newThread_Execute()
{
    throw new Exception("The method or operation is not implemented.");
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
private static void Form1_UIThreadException(object sender, ThreadExceptionEventArgs t)
{
    DialogResult result = DialogResult.Cancel;
    try
    {
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception);
    }
    catch
    {
        try
        {
            MessageBox.Show("Fatal Windows Forms Error",
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }

    // Exits the program when the user clicks Abort.
    if (result == DialogResult.Abort)
        Application.Exit();
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
// NOTE: This exception cannot be kept from terminating the application - it can only
// log the event, and inform the user about it.
private static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
{
    try
    {
        Exception ex = (Exception)e.ExceptionObject;
        string errorMsg = "An application error occurred. Please contact the adminstrator " +
            "with the following information:\n\n";

        // Since we can't prevent the app from terminating, log this to the event log.
        if (!EventLog.SourceExists("ThreadException"))
        {
            EventLog.CreateEventSource("ThreadException", "Application");
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "ThreadException";
        myLog.WriteEntry(errorMsg + ex.Message + "\n\nStack Trace:\n" + ex.StackTrace);
    }
    catch (Exception exc)
    {
        try
        {
            MessageBox.Show("Fatal Non-UI Error",
                "Fatal Non-UI Error. Could not write the error to the event log. Reason: "
                + exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }
}

// Creates the error message and displays it.
private static DialogResult ShowThreadExceptionDialog(string title, Exception e)
{
    string errorMsg = "An application error occurred. Please contact the adminstrator " +
        "with the following information:\n\n";
    errorMsg = errorMsg + e.Message + "\n\nStack Trace:\n" + e.StackTrace;
    return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore,
        MessageBoxIcon.Stop);
}

Private newThread As Thread = Nothing

' Starts the application. 
<SecurityPermission(SecurityAction.Demand, Flags:=SecurityPermissionFlag.ControlAppDomain)> _
Public Shared Sub Main()
    ' Add the event handler for handling UI thread exceptions to the event.
    AddHandler Application.ThreadException, AddressOf ErrorHandlerForm.Form1_UIThreadException

    ' Set the unhandled exception mode to force all Windows Forms errors to go through
    ' our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException)

    ' Add the event handler for handling non-UI thread exceptions to the event. 
    AddHandler AppDomain.CurrentDomain.UnhandledException, AddressOf CurrentDomain_UnhandledException

    ' Runs the application.
    Application.Run(New ErrorHandlerForm())
End Sub


' Programs the button to throw an exception when clicked.
Private Sub button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button1.Click
    Throw New ArgumentException("The parameter was invalid")
End Sub

' Start a new thread, separate from Windows Forms, that will throw an exception.
Private Sub button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button2.Click
    Dim newThreadStart As New ThreadStart(AddressOf newThread_Execute)
    newThread = New Thread(newThreadStart)
    newThread.Start()
End Sub


' The thread we start up to demonstrate non-UI exception handling. 
Sub newThread_Execute()
    Throw New Exception("The method or operation is not implemented.")
End Sub


' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
Private Shared Sub Form1_UIThreadException(ByVal sender As Object, ByVal t As ThreadExceptionEventArgs)
    Dim result As System.Windows.Forms.DialogResult = _
        System.Windows.Forms.DialogResult.Cancel
    Try
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception)
    Catch
        Try
            MessageBox.Show("Fatal Windows Forms Error", _
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try

    ' Exits the program when the user clicks Abort.
    If result = DialogResult.Abort Then
        Application.Exit()
    End If
End Sub

' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
' NOTE: This exception cannot be kept from terminating the application - it can only 
' log the event, and inform the user about it. 
Private Shared Sub CurrentDomain_UnhandledException(ByVal sender As Object, _
ByVal e As UnhandledExceptionEventArgs)
    Try
        Dim ex As Exception = CType(e.ExceptionObject, Exception)
        Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
            "with the following information:" & ControlChars.Lf & ControlChars.Lf

        ' Since we can't prevent the app from terminating, log this to the event log.
        If (Not EventLog.SourceExists("ThreadException")) Then
            EventLog.CreateEventSource("ThreadException", "Application")
        End If

        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog()
        myLog.Source = "ThreadException"
        myLog.WriteEntry((errorMsg + ex.Message & ControlChars.Lf & ControlChars.Lf & _
            "Stack Trace:" & ControlChars.Lf & ex.StackTrace))
    Catch exc As Exception
        Try
            MessageBox.Show("Fatal Non-UI Error", "Fatal Non-UI Error. Could not write the error to the event log. " & _
                "Reason: " & exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try
End Sub


' Creates the error message and displays it.
Private Shared Function ShowThreadExceptionDialog(ByVal title As String, ByVal e As Exception) As DialogResult
    Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
 "with the following information:" & ControlChars.Lf & ControlChars.Lf
    errorMsg = errorMsg & e.Message & ControlChars.Lf & _
 ControlChars.Lf & "Stack Trace:" & ControlChars.Lf & e.StackTrace

    Return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
End Function

설명

호출 SetUnhandledExceptionMode 사용 하 여 애플리케이션의 기본 폼을 인스턴스화하기 전에 Run 메서드.

가 이true면 threadScope 스레드 예외 모드가 설정됩니다. 스레드 예외 모드를 사용 하는 경우 애플리케이션 예외 모드를 재정의 mode 로 설정 되지 않은 Automatic합니다.

때 threadScope 는 false, 애플리케이션 예외 모드가 설정 됩니다. 애플리케이션 예외 모드는 포함 된 모든 스레드는 Automatic 모드입니다. 애플리케이션 예외 모드를 설정 하는 경우에 현재 스레드의 설정은 적용 되지 않습니다.

Windows Forms 만들고 소유하지 않은 스레드에서 발생하는 예외를 catch하려면 이벤트 처리기를 사용합니다UnhandledException.

적용 대상

Application.SetUnhandledExceptionMode 메서드

정의

오버로드

예제

SetUnhandledExceptionMode(UnhandledExceptionMode)

매개 변수

예외

예제

설명

추가 정보

적용 대상

SetUnhandledExceptionMode(UnhandledExceptionMode, Boolean)

매개 변수

예외

예제

설명

적용 대상

피드백

추가 리소스