Point3DCollection 클래스
정의
중요
일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.
Point3D 개체의 정렬된 컬렉션을 나타냅니다.
public ref class Point3DCollection sealed : System::Windows::Freezable, IFormattable, System::Collections::Generic::ICollection<System::Windows::Media::Media3D::Point3D>, System::Collections::Generic::IEnumerable<System::Windows::Media::Media3D::Point3D>, System::Collections::Generic::IList<System::Windows::Media::Media3D::Point3D>, System::Collections::IList
[System.ComponentModel.TypeConverter(typeof(System.Windows.Media.Media3D.Point3DCollectionConverter))]
public sealed class Point3DCollection : System.Windows.Freezable, IFormattable, System.Collections.Generic.ICollection<System.Windows.Media.Media3D.Point3D>, System.Collections.Generic.IEnumerable<System.Windows.Media.Media3D.Point3D>, System.Collections.Generic.IList<System.Windows.Media.Media3D.Point3D>, System.Collections.IList
[<System.ComponentModel.TypeConverter(typeof(System.Windows.Media.Media3D.Point3DCollectionConverter))>]
type Point3DCollection = class
inherit Freezable
interface IFormattable
interface IList
interface ICollection
interface IList<Point3D>
interface ICollection<Point3D>
interface seq<Point3D>
interface IEnumerable
[<System.ComponentModel.TypeConverter(typeof(System.Windows.Media.Media3D.Point3DCollectionConverter))>]
type Point3DCollection = class
inherit Freezable
interface IFormattable
interface IList
interface ICollection
interface IEnumerable
interface IList<Point3D>
interface ICollection<Point3D>
interface seq<Point3D>
[<System.ComponentModel.TypeConverter(typeof(System.Windows.Media.Media3D.Point3DCollectionConverter))>]
type Point3DCollection = class
inherit Freezable
interface ICollection<Point3D>
interface seq<Point3D>
interface IEnumerable
interface IList<Point3D>
interface ICollection
interface IList
interface IFormattable
Public NotInheritable Class Point3DCollection
Inherits Freezable
Implements ICollection(Of Point3D), IEnumerable(Of Point3D), IFormattable, IList, IList(Of Point3D)
- 상속
- 특성
- 구현
예제
using System;
using System.Windows;
using System.Windows.Controls;
using System.Windows.Media;
using System.Windows.Media.Media3D;
namespace SDKSample
{
public partial class Basic3DShapeExample : Page
{
public Basic3DShapeExample()
{
// Declare scene objects.
Viewport3D myViewport3D = new Viewport3D();
Model3DGroup myModel3DGroup = new Model3DGroup();
GeometryModel3D myGeometryModel = new GeometryModel3D();
ModelVisual3D myModelVisual3D = new ModelVisual3D();
// Defines the camera used to view the 3D object. In order to view the 3D object,
// the camera must be positioned and pointed such that the object is within view
// of the camera.
PerspectiveCamera myPCamera = new PerspectiveCamera();
// Specify where in the 3D scene the camera is.
myPCamera.Position = new Point3D(0, 0, 2);
// Specify the direction that the camera is pointing.
myPCamera.LookDirection = new Vector3D(0, 0, -1);
// Define camera's horizontal field of view in degrees.
myPCamera.FieldOfView = 60;
// Asign the camera to the viewport
myViewport3D.Camera = myPCamera;
// Define the lights cast in the scene. Without light, the 3D object cannot
// be seen. Note: to illuminate an object from additional directions, create
// additional lights.
DirectionalLight myDirectionalLight = new DirectionalLight();
myDirectionalLight.Color = Colors.White;
myDirectionalLight.Direction = new Vector3D(-0.61, -0.5, -0.61);
myModel3DGroup.Children.Add(myDirectionalLight);
// The geometry specifes the shape of the 3D plane. In this sample, a flat sheet
// is created.
MeshGeometry3D myMeshGeometry3D = new MeshGeometry3D();
// Create a collection of normal vectors for the MeshGeometry3D.
Vector3DCollection myNormalCollection = new Vector3DCollection();
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myNormalCollection.Add(new Vector3D(0,0,1));
myMeshGeometry3D.Normals = myNormalCollection;
// Create a collection of vertex positions for the MeshGeometry3D.
Point3DCollection myPositionCollection = new Point3DCollection();
myPositionCollection.Add(new Point3D(-0.5, -0.5, 0.5));
myPositionCollection.Add(new Point3D(0.5, -0.5, 0.5));
myPositionCollection.Add(new Point3D(0.5, 0.5, 0.5));
myPositionCollection.Add(new Point3D(0.5, 0.5, 0.5));
myPositionCollection.Add(new Point3D(-0.5, 0.5, 0.5));
myPositionCollection.Add(new Point3D(-0.5, -0.5, 0.5));
myMeshGeometry3D.Positions = myPositionCollection;
// Create a collection of texture coordinates for the MeshGeometry3D.
PointCollection myTextureCoordinatesCollection = new PointCollection();
myTextureCoordinatesCollection.Add(new Point(0, 0));
myTextureCoordinatesCollection.Add(new Point(1, 0));
myTextureCoordinatesCollection.Add(new Point(1, 1));
myTextureCoordinatesCollection.Add(new Point(1, 1));
myTextureCoordinatesCollection.Add(new Point(0, 1));
myTextureCoordinatesCollection.Add(new Point(0, 0));
myMeshGeometry3D.TextureCoordinates = myTextureCoordinatesCollection;
// Create a collection of triangle indices for the MeshGeometry3D.
Int32Collection myTriangleIndicesCollection = new Int32Collection();
myTriangleIndicesCollection.Add(0);
myTriangleIndicesCollection.Add(1);
myTriangleIndicesCollection.Add(2);
myTriangleIndicesCollection.Add(3);
myTriangleIndicesCollection.Add(4);
myTriangleIndicesCollection.Add(5);
myMeshGeometry3D.TriangleIndices = myTriangleIndicesCollection;
// Apply the mesh to the geometry model.
myGeometryModel.Geometry = myMeshGeometry3D;
// The material specifies the material applied to the 3D object. In this sample a
// linear gradient covers the surface of the 3D object.
// Create a horizontal linear gradient with four stops.
LinearGradientBrush myHorizontalGradient = new LinearGradientBrush();
myHorizontalGradient.StartPoint = new Point(0, 0.5);
myHorizontalGradient.EndPoint = new Point(1, 0.5);
myHorizontalGradient.GradientStops.Add(new GradientStop(Colors.Yellow, 0.0));
myHorizontalGradient.GradientStops.Add(new GradientStop(Colors.Red, 0.25));
myHorizontalGradient.GradientStops.Add(new GradientStop(Colors.Blue, 0.75));
myHorizontalGradient.GradientStops.Add(new GradientStop(Colors.LimeGreen, 1.0));
// Define material and apply to the mesh geometries.
DiffuseMaterial myMaterial = new DiffuseMaterial(myHorizontalGradient);
myGeometryModel.Material = myMaterial;
// Apply a transform to the object. In this sample, a rotation transform is applied,
// rendering the 3D object rotated.
RotateTransform3D myRotateTransform3D = new RotateTransform3D();
AxisAngleRotation3D myAxisAngleRotation3d = new AxisAngleRotation3D();
myAxisAngleRotation3d.Axis = new Vector3D(0,3,0);
myAxisAngleRotation3d.Angle = 40;
myRotateTransform3D.Rotation = myAxisAngleRotation3d;
myGeometryModel.Transform = myRotateTransform3D;
// Add the geometry model to the model group.
myModel3DGroup.Children.Add(myGeometryModel);
// Add the group of models to the ModelVisual3d.
myModelVisual3D.Content = myModel3DGroup;
//
myViewport3D.Children.Add(myModelVisual3D);
// Apply the viewport to the page so it will be rendered.
this.Content = myViewport3D;
}
}
}
Imports System.Windows
Imports System.Windows.Controls
Imports System.Windows.Media
Imports System.Windows.Media.Media3D
Namespace SDKSample
Partial Public Class Basic3DShapeExample
Inherits Page
Public Sub New()
' Declare scene objects.
Dim myViewport3D As New Viewport3D()
Dim myModel3DGroup As New Model3DGroup()
Dim myGeometryModel As New GeometryModel3D()
Dim myModelVisual3D As New ModelVisual3D()
' Defines the camera used to view the 3D object. In order to view the 3D object,
' the camera must be positioned and pointed such that the object is within view
' of the camera.
Dim myPCamera As New PerspectiveCamera()
' Specify where in the 3D scene the camera is.
myPCamera.Position = New Point3D(0, 0, 2)
' Specify the direction that the camera is pointing.
myPCamera.LookDirection = New Vector3D(0, 0, -1)
' Define camera's horizontal field of view in degrees.
myPCamera.FieldOfView = 60
' Asign the camera to the viewport
myViewport3D.Camera = myPCamera
' Define the lights cast in the scene. Without light, the 3D object cannot
' be seen. Note: to illuminate an object from additional directions, create
' additional lights.
Dim myDirectionalLight As New DirectionalLight()
myDirectionalLight.Color = Colors.White
myDirectionalLight.Direction = New Vector3D(-0.61, -0.5, -0.61)
myModel3DGroup.Children.Add(myDirectionalLight)
' The geometry specifes the shape of the 3D plane. In this sample, a flat sheet
' is created.
Dim myMeshGeometry3D As New MeshGeometry3D()
' Create a collection of normal vectors for the MeshGeometry3D.
Dim myNormalCollection As New Vector3DCollection()
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myNormalCollection.Add(New Vector3D(0,0,1))
myMeshGeometry3D.Normals = myNormalCollection
' Create a collection of vertex positions for the MeshGeometry3D.
Dim myPositionCollection As New Point3DCollection()
myPositionCollection.Add(New Point3D(-0.5, -0.5, 0.5))
myPositionCollection.Add(New Point3D(0.5, -0.5, 0.5))
myPositionCollection.Add(New Point3D(0.5, 0.5, 0.5))
myPositionCollection.Add(New Point3D(0.5, 0.5, 0.5))
myPositionCollection.Add(New Point3D(-0.5, 0.5, 0.5))
myPositionCollection.Add(New Point3D(-0.5, -0.5, 0.5))
myMeshGeometry3D.Positions = myPositionCollection
' Create a collection of texture coordinates for the MeshGeometry3D.
Dim myTextureCoordinatesCollection As New PointCollection()
myTextureCoordinatesCollection.Add(New Point(0, 0))
myTextureCoordinatesCollection.Add(New Point(1, 0))
myTextureCoordinatesCollection.Add(New Point(1, 1))
myTextureCoordinatesCollection.Add(New Point(1, 1))
myTextureCoordinatesCollection.Add(New Point(0, 1))
myTextureCoordinatesCollection.Add(New Point(0, 0))
myMeshGeometry3D.TextureCoordinates = myTextureCoordinatesCollection
' Create a collection of triangle indices for the MeshGeometry3D.
Dim myTriangleIndicesCollection As New Int32Collection()
myTriangleIndicesCollection.Add(0)
myTriangleIndicesCollection.Add(1)
myTriangleIndicesCollection.Add(2)
myTriangleIndicesCollection.Add(3)
myTriangleIndicesCollection.Add(4)
myTriangleIndicesCollection.Add(5)
myMeshGeometry3D.TriangleIndices = myTriangleIndicesCollection
' Apply the mesh to the geometry model.
myGeometryModel.Geometry = myMeshGeometry3D
' The material specifies the material applied to the 3D object. In this sample a
' linear gradient covers the surface of the 3D object.
' Create a horizontal linear gradient with four stops.
Dim myHorizontalGradient As New LinearGradientBrush()
myHorizontalGradient.StartPoint = New Point(0, 0.5)
myHorizontalGradient.EndPoint = New Point(1, 0.5)
myHorizontalGradient.GradientStops.Add(New GradientStop(Colors.Yellow, 0.0))
myHorizontalGradient.GradientStops.Add(New GradientStop(Colors.Red, 0.25))
myHorizontalGradient.GradientStops.Add(New GradientStop(Colors.Blue, 0.75))
myHorizontalGradient.GradientStops.Add(New GradientStop(Colors.LimeGreen, 1.0))
' Define material and apply to the mesh geometries.
Dim myMaterial As New DiffuseMaterial(myHorizontalGradient)
myGeometryModel.Material = myMaterial
' Apply a transform to the object. In this sample, a rotation transform is applied,
' rendering the 3D object rotated.
Dim myRotateTransform3D As New RotateTransform3D()
Dim myAxisAngleRotation3d As New AxisAngleRotation3D()
myAxisAngleRotation3d.Axis = New Vector3D(0,3,0)
myAxisAngleRotation3d.Angle = 40
myRotateTransform3D.Rotation = myAxisAngleRotation3d
myGeometryModel.Transform = myRotateTransform3D
' Add the geometry model to the model group.
myModel3DGroup.Children.Add(myGeometryModel)
' Add the group of models to the ModelVisual3d.
myModelVisual3D.Content = myModel3DGroup
'
myViewport3D.Children.Add(myModelVisual3D)
' Apply the viewport to the page so it will be rendered.
Me.Content = myViewport3D
End Sub
End Class
End Namespace
설명
XAML 특성 사용
<object property="oneOrMorePoint3Ds"/>
XAML 암시적 컬렉션 사용
<object>
<object.property>
oneOrMorePoint3DObjectElements
</object.property>
</object>
XAML 값
oneOrMorePoint3Ds 각 값 집합이 쉼표 및/또는 하나 이상의 공백으로 구분된 하나 이상의 Point3D 구조체입니다.
예를 들어 "0,0,5 100,100,125 200,100,30"
고 "0,0,5,100,100,125,200,100,30"
은 모두 유효 합니다.
oneOrMorePointObjectElements 개체 요소 구문을 사용하여 선언된 하나 이상의 Point3D 개체입니다.
생성자
Point3DCollection() |
Point3DCollection 클래스의 새 인스턴스를 초기화합니다. |
Point3DCollection(IEnumerable<Point3D>) |
지정된 컬렉션을 사용하여 Point3DCollection 클래스의 새 인스턴스를 초기화합니다. |
Point3DCollection(Int32) |
지정한 용량을 사용하여 Point3DCollection 클래스의 새 인스턴스를 초기화합니다. |
속성
CanFreeze |
개체를 수정 불가능으로 설정할 수 있는지 여부를 나타내는 값을 가져옵니다. (다음에서 상속됨 Freezable) |
Count |
Point3D 컬렉션에 들어 있는 Point3DCollection 개체 수를 가져옵니다. |
DependencyObjectType |
DependencyObjectType 이 instance CLR 형식을 래핑하는 을 가져옵니다. (다음에서 상속됨 DependencyObject) |
Dispatcher |
이 Dispatcher와 연결된 DispatcherObject를 가져옵니다. (다음에서 상속됨 DispatcherObject) |
IsFrozen |
개체가 현재 수정 가능한지 여부를 나타내는 값을 가져옵니다. (다음에서 상속됨 Freezable) |
IsSealed |
이 인스턴스가 현재 봉인되어 있는지(읽기 전용인지) 여부를 나타내는 값을 가져옵니다. (다음에서 상속됨 DependencyObject) |
Item[Int32] |
지정된 인덱스(0부터 시작)에 있는 Point3D를 가져오거나 설정합니다. |
메서드
Add(Point3D) |
Point3D 개체를 Point3DCollection의 끝에 추가합니다. |
CheckAccess() |
호출 스레드가 이 DispatcherObject에 액세스할 수 있는지 여부를 확인합니다. (다음에서 상속됨 DispatcherObject) |
Clear() |
이 Point3DCollection에서 모든 항목을 제거합니다. |
ClearValue(DependencyProperty) |
속성의 로컬 값을 지웁니다. 지울 속성이 DependencyProperty 식별자에서 지정됩니다. (다음에서 상속됨 DependencyObject) |
ClearValue(DependencyPropertyKey) |
읽기 전용 속성의 로컬 값을 지웁니다. 선언할 속성이 DependencyPropertyKey에서 지정됩니다. (다음에서 상속됨 DependencyObject) |
Clone() |
이 개체 값의 전체 복사본을 만들어 이 Point3DCollection의 수정 가능한 복제본을 만듭니다. 종속성 속성을 복사하는 경우 이 메서드는 더 이상 확인되지 않을 수도 있는 리소스 참조와 데이터 바인딩을 복사하지만 애니메이션이나 애니메이션의 현재 값은 복사하지 않습니다. |
CloneCore(Freezable) |
기본(애니메이션이 적용되지 않은) 속성 값을 사용하여 인스턴스를 지정된 Freezable의 복제본(전체 복사본)으로 만듭니다. (다음에서 상속됨 Freezable) |
CloneCurrentValue() |
Point3DCollection 개체의 현재 값에 대한 전체 복사본을 만들어 이 개체의 수정 가능한 복제본을 만듭니다. 리소스 참조, 데이터 바인딩 및 애니메이션은 복사되지 않지만 이러한 요소의 현재 값은 복사됩니다. |
CloneCurrentValueCore(Freezable) |
현재 속성 값을 사용하여 이 인스턴스를 지정된 Freezable의 수정 가능한 클론(전체 복사본)으로 만듭니다. (다음에서 상속됨 Freezable) |
CoerceValue(DependencyProperty) |
지정된 종속성 속성의 값을 강제 변환합니다. 호출하는 DependencyObject에 있으므로 이 작업은 종속성 속성의 속성 메타데이터에 지정된 CoerceValueCallback 함수를 호출하여 수행합니다. (다음에서 상속됨 DependencyObject) |
Contains(Point3D) |
지정된 Point3D가 이 Point3DCollection에 포함되는지 여부를 확인합니다. |
CopyTo(Point3D[], Int32) |
지정된 인덱스 값에서 시작하여 이 Point3DCollection의 항목을 Point3D 개체 배열에 복사합니다. |
CreateInstance() |
Freezable 클래스의 새 인스턴스를 초기화합니다. (다음에서 상속됨 Freezable) |
CreateInstanceCore() |
파생 클래스에서 구현되는 경우 Freezable 파생 클래스의 새 인스턴스를 만듭니다. (다음에서 상속됨 Freezable) |
Equals(Object) |
제공된 DependencyObject가 현재 DependencyObject에 해당하는지 여부를 확인합니다. (다음에서 상속됨 DependencyObject) |
Freeze() |
현재 개체를 수정할 수 없게 설정하고 해당 IsFrozen 속성을 |
FreezeCore(Boolean) |
Freezable을 수정할 수 없게 만들거나, 수정할 수 없게 만들 수 있는지 테스트합니다. (다음에서 상속됨 Freezable) |
GetAsFrozen() |
애니메이션이 적용되지 않은 기준 속성 값을 사용하여 Freezable의 고정된 복사본을 만듭니다. 복사본이 고정되므로 고정된 하위 개체는 모두 참조를 통해 복사됩니다. (다음에서 상속됨 Freezable) |
GetAsFrozenCore(Freezable) |
기본(애니메이션이 적용되지 않은) 속성 값을 사용하여 인스턴스를 지정된 Freezable의 고정된 복제본으로 만듭니다. (다음에서 상속됨 Freezable) |
GetCurrentValueAsFrozen() |
현재 속성 값을 사용하여 Freezable의 고정된 복사본을 만듭니다. 복사본이 고정되므로 고정된 하위 개체는 모두 참조를 통해 복사됩니다. (다음에서 상속됨 Freezable) |
GetCurrentValueAsFrozenCore(Freezable) |
현재 인스턴스를 지정된 Freezable의 고정 클론으로 만듭니다. 개체에 애니메이션 효과를 준 종속성 속성이 있는 경우 애니메이션 효과를 준 현재 값이 복사됩니다. (다음에서 상속됨 Freezable) |
GetEnumerator() |
컬렉션을 반복할 수 있는 열거자를 반환합니다. |
GetHashCode() |
이 DependencyObject의 해시 코드를 가져옵니다. (다음에서 상속됨 DependencyObject) |
GetLocalValueEnumerator() |
이 DependencyObject에 대해 로컬로 값을 설정한 종속성 속성을 확인하기 위한 특수 열거자를 만듭니다. (다음에서 상속됨 DependencyObject) |
GetType() |
현재 인스턴스의 Type을 가져옵니다. (다음에서 상속됨 Object) |
GetValue(DependencyProperty) |
이 DependencyObject의 인스턴스에서 종속성 속성의 현재 유효 값을 반환합니다. (다음에서 상속됨 DependencyObject) |
IndexOf(Point3D) |
지정된 Point3D가 맨 처음 발견되는 인덱스 위치를 가져옵니다. |
Insert(Int32, Point3D) |
지정된 인덱스 위치에 있는 이 Point3D에 Point3DCollection를 삽입합니다. |
InvalidateProperty(DependencyProperty) |
지정된 종속성 속성의 유효 값을 다시 계산합니다. (다음에서 상속됨 DependencyObject) |
MemberwiseClone() |
현재 Object의 단순 복사본을 만듭니다. (다음에서 상속됨 Object) |
OnChanged() |
현재 Freezable 개체가 수정될 때 호출됩니다. (다음에서 상속됨 Freezable) |
OnFreezablePropertyChanged(DependencyObject, DependencyObject) |
방금 설정된 DependencyObjectType 데이터 멤버에 대한 적절한 컨텍스트 포인터를 설정합니다. (다음에서 상속됨 Freezable) |
OnFreezablePropertyChanged(DependencyObject, DependencyObject, DependencyProperty) |
이 멤버는 WPF(Windows Presentation Foundation) 인프라를 지원하며 코드에서 직접 사용할 수 없습니다. (다음에서 상속됨 Freezable) |
OnPropertyChanged(DependencyPropertyChangedEventArgs) |
OnPropertyChanged(DependencyPropertyChangedEventArgs)의 DependencyObject 구현을 재정의하여 Freezable 형식의 변화하는 종속성 속성에 대한 응답으로 Changed 처리기도 호출합니다. (다음에서 상속됨 Freezable) |
Parse(String) |
Point3D 개체 컬렉션의 문자열 표현을 해당 Point3DCollection으로 변환합니다. |
ReadLocalValue(DependencyProperty) |
종속성 속성의 로컬 값을 반환합니다(있는 경우). (다음에서 상속됨 DependencyObject) |
ReadPreamble() |
유효한 스레드에서 Freezable에 액세스하고 있는지 확인합니다. Freezable 상속자는 종속성 속성이 아닌 데이터 멤버를 읽는 API의 시작 부분에서 이 메서드를 호출해야 합니다. (다음에서 상속됨 Freezable) |
Remove(Point3D) |
Point3D에서 맨 처음 발견되는 지정된 Point3DCollection을 제거합니다. |
RemoveAt(Int32) |
Point3D에서 지정된 인덱스 위치의 Point3DCollection를 제거합니다. |
SetCurrentValue(DependencyProperty, Object) |
해당 값 소스를 변경하지 않고 종속성 속성의 값을 설정합니다. (다음에서 상속됨 DependencyObject) |
SetValue(DependencyProperty, Object) |
지정된 종속성 속성 식별자를 가진 종속성 속성의 로컬 값을 설정합니다. (다음에서 상속됨 DependencyObject) |
SetValue(DependencyPropertyKey, Object) |
종속성 속성의 DependencyPropertyKey 식별자에 의해 지정된 읽기 전용 종속성 속성의 로컬 값을 설정합니다. (다음에서 상속됨 DependencyObject) |
ShouldSerializeProperty(DependencyProperty) |
serialization 프로세스에서 지정된 종속성 속성의 값을 직렬화해야 하는지 여부를 나타내는 값을 반환합니다. (다음에서 상속됨 DependencyObject) |
ToString() |
이 Point3DCollection의 문자열 표현을 만듭니다. |
ToString(IFormatProvider) |
이 Point3DCollection의 문자열 표현을 만듭니다. |
VerifyAccess() |
호출 스레드에서 이 DispatcherObject에 액세스할 수 있는지 확인합니다. (다음에서 상속됨 DispatcherObject) |
WritePostscript() |
Changed 에 대한 Freezable 이벤트를 발생시키고 해당 OnChanged() 메서드를 호출합니다. Freezable에서 파생된 클래스는 종속성 속성으로 저장되지 않은 클래스 멤버를 수정하는 모든 API의 끝에서 이 메서드를 호출해야 합니다. (다음에서 상속됨 Freezable) |
WritePreamble() |
Freezable이 고정되어 있지 않고 유효한 스레드 컨텍스트에서 액세스되고 있는지 확인합니다. Freezable 상속자는 종속성 속성이 아닌 데이터 멤버에 쓰는 API의 시작 부분에서 이 메서드를 호출해야 합니다. (다음에서 상속됨 Freezable) |
이벤트
Changed |
Freezable 또는 여기에 들어 있는 개체가 수정될 때 발생합니다. (다음에서 상속됨 Freezable) |
명시적 인터페이스 구현
ICollection.CopyTo(Array, Int32) |
이 멤버에 대한 설명은 CopyTo(Array, Int32)를 참조하세요. |
ICollection.IsSynchronized |
이 멤버에 대한 설명은 IsSynchronized를 참조하세요. |
ICollection.SyncRoot |
이 멤버에 대한 설명은 SyncRoot를 참조하세요. |
ICollection<Point3D>.IsReadOnly |
이 멤버에 대한 설명은 IsReadOnly를 참조하세요. |
IEnumerable.GetEnumerator() |
이 멤버에 대한 설명은 GetEnumerator()를 참조하세요. |
IEnumerable<Point3D>.GetEnumerator() |
이 멤버에 대한 설명은 GetEnumerator()를 참조하세요. |
IFormattable.ToString(String, IFormatProvider) |
이 멤버에 대한 설명은 ToString(String, IFormatProvider)를 참조하세요. |
IList.Add(Object) |
이 멤버에 대한 설명은 Add(Object)를 참조하세요. |
IList.Contains(Object) |
이 멤버에 대한 설명은 Contains(Object)를 참조하세요. |
IList.IndexOf(Object) |
이 멤버에 대한 설명은 IndexOf(Object)를 참조하세요. |
IList.Insert(Int32, Object) |
이 멤버에 대한 설명은 Insert(Int32, Object)를 참조하세요. |
IList.IsFixedSize |
이 멤버에 대한 설명은 IsFixedSize를 참조하세요. |
IList.IsReadOnly |
이 멤버에 대한 설명은 IsReadOnly를 참조하세요. |
IList.Item[Int32] |
이 멤버에 대한 설명은 Item[Int32]를 참조하세요. |
IList.Remove(Object) |
이 멤버에 대한 설명은 Remove(Object)를 참조하세요. |
확장 메서드
적용 대상
.NET
피드백
https://aka.ms/ContentUserFeedback
출시 예정: 2024년 내내 콘텐츠에 대한 피드백 메커니즘으로 GitHub 문제를 단계적으로 폐지하고 이를 새로운 피드백 시스템으로 바꿀 예정입니다. 자세한 내용은 다음을 참조하세요.다음에 대한 사용자 의견 제출 및 보기