ToolboxItemFilterType 열거형

아티클
08/21/2007

ToolboxItemFilterAttribute에서 사용된 필터 형식을 나타내는 식별자를 정의합니다.

네임스페이스: System.ComponentModel
어셈블리: System(system.dll)

구문

‘선언
Public Enumeration ToolboxItemFilterType
‘사용 방법
Dim instance As ToolboxItemFilterType

public enum ToolboxItemFilterType

public enum class ToolboxItemFilterType

public enum ToolboxItemFilterType

public enum ToolboxItemFilterType

멤버

	멤버 이름	설명
	Allow	도구 상자 항목 필터 문자열을 사용할 수 있지만 반드시 필요하지는 않음을 나타냅니다.
	Custom	도구 상자 항목 필터 문자열을 사용할지 여부를 결정하려면 사용자 지정 처리가 필요함을 나타냅니다. 일반적으로 이 형식의 ToolboxItemFilterType은 디자이너에서 코드를 통해 도구 상자 항목을 허용할지 또는 거부할지를 나타내기 위해 루트 디자이너 클래스에 지정됩니다. 디자이너는 IToolboxUser 인터페이스의 GetToolSupported 메서드를 구현해야 합니다.
	Prevent	도구 상자 항목 필터 문자열을 사용할 수 없음을 나타냅니다. 디자이너와 구성 요소 클래스 둘다 필터 문자열을 가지며 둘 중 하나가 ToolboxItemFilterType의 Prevent를 가질 경우 해당 도구 상자 항목을 사용할 수 없습니다.
	Require	활성화할 도구 상자 항목에 대해 도구 상자 항목 필터 문자열이 있어야 함을 나타냅니다. 필터 형식이 Require인 도구 상자 항목을 활성화하려면 디자이너와 구성 요소 클래스에 일치하는 필터 문자열이 있어야 합니다. 또한, 디자이너와 구성 요소 클래스 둘다 ToolboxItemFilterType의 Prevent를 가지지 않는 경우에도 해당 도구 상자를 활성화할 수 있습니다.

예제

다음 코드 예제에서는 ToolboxItemFilterAttribute를 적용하는 방법을 보여 줍니다.

Imports System
Imports System.Collections
Imports System.ComponentModel
Imports System.ComponentModel.Design
Imports System.Diagnostics
Imports System.Drawing
Imports System.Drawing.Design
Imports System.Windows.Forms
Imports System.Windows.Forms.Design

' This example contains an IRootDesigner that implements the IToolboxUser interface.
' This example demonstrates how to enable the GetToolSupported method of an IToolboxUser
' designer in order to disable specific toolbox items, and how to respond to the 
' invocation of a ToolboxItem in the ToolPicked method of an IToolboxUser implementation.
' This example component class demonstrates the associated IRootDesigner which 
' implements the IToolboxUser interface. When designer view is invoked, Visual 
' Studio .NET attempts to display a design mode view for the class at the top 
' of a code file. This can sometimes fail when the class is one of multiple types 
' in a code file, and has a DesignerAttribute associating it with an IRootDesigner. 
' Placing a derived class at the top of the code file solves this problem. A 
' derived class is not typically needed for this reason, except that placing the 
' RootDesignedComponent class in another file is not a simple solution for a code 
' example that is packaged in one segment of code.

Public Class RootViewSampleComponent
    Inherits RootDesignedComponent
End Class

' The following attribute associates the SampleRootDesigner with this example component.
<DesignerAttribute(GetType(SampleRootDesigner), GetType(IRootDesigner))> _
Public Class RootDesignedComponent
    Inherits System.Windows.Forms.Control
End Class

' This example IRootDesigner implements the IToolboxUser interface and provides a 
' Windows Forms view technology view for its associated component using an internal 
' Control type.     
' The following ToolboxItemFilterAttribute enables the GetToolSupported method of this
' IToolboxUser designer to be queried to check for whether to enable or disable all 
' ToolboxItems which create any components whose type name begins with "System.Windows.Forms".
<ToolboxItemFilterAttribute("System.Windows.Forms", ToolboxItemFilterType.Custom)> _
<System.Security.Permissions.PermissionSetAttribute(System.Security.Permissions.SecurityAction.Demand, Name:="FullTrust")> _
Public Class SampleRootDesigner
    Inherits ParentControlDesigner
    Implements IRootDesigner, IToolboxUser

    ' Member field of custom type RootDesignerView, a control that is shown in the 
    ' design mode document window. This member is cached to reduce processing needed 
    ' to recreate the view control on each call to GetView().
    Private m_view As RootDesignerView

    ' This string array contains type names of components that should not be added to 
    ' the component managed by this designer from the Toolbox.  Any ToolboxItems whose 
    ' type name matches a type name in this array will be marked disabled according to  
    ' the signal returned by the IToolboxUser.GetToolSupported method of this designer.
    Private blockedTypeNames As String() = {"System.Windows.Forms.ListBox", "System.Windows.Forms.GroupBox"}

    ' IRootDesigner.SupportedTechnologies is a required override for an IRootDesigner.
    ' This designer provides a display using the Windows Forms view technology.
    ReadOnly Property SupportedTechnologies() As ViewTechnology() Implements IRootDesigner.SupportedTechnologies
        Get
            Return New ViewTechnology() {ViewTechnology.Default}
        End Get
    End Property

    ' This method returns an object that provides the view for this root designer. 
    Function GetView(ByVal technology As ViewTechnology) As Object Implements IRootDesigner.GetView
        ' If the design environment requests a view technology other than Windows 
        ' Forms, this method throws an Argument Exception.
        If technology <> ViewTechnology.Default Then
            Throw New ArgumentException("An unsupported view technology was requested", "Unsupported view technology.")
        End If

        ' Creates the view object if it has not yet been initialized.
        If m_view Is Nothing Then
            m_view = New RootDesignerView(Me)
        End If
        Return m_view
    End Function

    ' This method can signal whether to enable or disable the specified
    ' ToolboxItem when the component associated with this designer is selected.
    Function GetToolSupported(ByVal tool As ToolboxItem) As Boolean Implements IToolboxUser.GetToolSupported
        ' Search the blocked type names array for the type name of the tool
        ' for which support for is being tested. Return false to indicate the
        ' tool should be disabled when the associated component is selected.
        Dim i As Integer
        For i = 0 To blockedTypeNames.Length - 1
            If tool.TypeName = blockedTypeNames(i) Then
                Return False
            End If
        Next i ' Return true to indicate support for the tool, if the type name of the
        ' tool is not located in the blockedTypeNames string array.
        Return True
    End Function

    ' This method can perform behavior when the specified tool has been invoked.
    ' Invocation of a ToolboxItem typically creates a component or components, 
    ' and adds any created components to the associated component.
    Sub ToolPicked(ByVal tool As ToolboxItem) Implements IToolboxUser.ToolPicked
    End Sub

    ' This control provides a Windows Forms view technology view object that 
    ' provides a display for the SampleRootDesigner.
    <DesignerAttribute(GetType(ParentControlDesigner), GetType(IDesigner))> _
    Friend Class RootDesignerView
        Inherits Control
        ' This field stores a reference to a designer.
        Private m_designer As IDesigner

        Public Sub New(ByVal designer As IDesigner)
            ' Performs basic control initialization.
            m_designer = designer
            BackColor = Color.Blue
            Font = New Font(Font.FontFamily.Name, 24.0F)
        End Sub

        ' This method is called to draw the view for the SampleRootDesigner.
        Protected Overrides Sub OnPaint(ByVal pe As PaintEventArgs)
            MyBase.OnPaint(pe)
            ' Draws the name of the component in large letters.
            pe.Graphics.DrawString(m_designer.Component.Site.Name, Font, Brushes.Yellow, New RectangleF(ClientRectangle.X, ClientRectangle.Y, ClientRectangle.Width, ClientRectangle.Height))
        End Sub
    End Class
End Class

using System;
using System.Collections;
using System.ComponentModel;
using System.ComponentModel.Design;
using System.Diagnostics;
using System.Drawing;
using System.Drawing.Design;
using System.Windows.Forms;
using System.Windows.Forms.Design;

// This example contains an IRootDesigner that implements the IToolboxUser interface.
// This example demonstrates how to enable the GetToolSupported method of an IToolboxUser
// designer in order to disable specific toolbox items, and how to respond to the 
// invocation of a ToolboxItem in the ToolPicked method of an IToolboxUser implementation.
namespace IToolboxUserExample
{
    // This example component class demonstrates the associated IRootDesigner which 
    // implements the IToolboxUser interface. When designer view is invoked, Visual 
    // Studio .NET attempts to display a design mode view for the class at the top 
    // of a code file. This can sometimes fail when the class is one of multiple types 
    // in a code file, and has a DesignerAttribute associating it with an IRootDesigner. 
    // Placing a derived class at the top of the code file solves this problem. A 
    // derived class is not typically needed for this reason, except that placing the 
    // RootDesignedComponent class in another file is not a simple solution for a code 
    // example that is packaged in one segment of code.
    public class RootViewSampleComponent : RootDesignedComponent
    {
    }

    // The following attribute associates the SampleRootDesigner with this example component.
    [DesignerAttribute(typeof(SampleRootDesigner), typeof(IRootDesigner))]
    public class RootDesignedComponent : System.Windows.Forms.Control
    {
    }

    // This example IRootDesigner implements the IToolboxUser interface and provides a 
    // Windows Forms view technology view for its associated component using an internal 
    // Control type.     
    // The following ToolboxItemFilterAttribute enables the GetToolSupported method of this
    // IToolboxUser designer to be queried to check for whether to enable or disable all 
    // ToolboxItems which create any components whose type name begins with "System.Windows.Forms".
    [ToolboxItemFilterAttribute("System.Windows.Forms", ToolboxItemFilterType.Custom)]
    [System.Security.Permissions.PermissionSet(System.Security.Permissions.SecurityAction.Demand, Name = "FullTrust")] 
    public class SampleRootDesigner : ParentControlDesigner, IRootDesigner, IToolboxUser
    {
        // This field is a custom Control type named RootDesignerView. This field references
        // a control that is shown in the design mode document window.
        private RootDesignerView view;

        // This string array contains type names of components that should not be added to 
        // the component managed by this designer from the Toolbox.  Any ToolboxItems whose 
        // type name matches a type name in this array will be marked disabled according to  
        // the signal returned by the IToolboxUser.GetToolSupported method of this designer.
        private string[] blockedTypeNames =
        {
            "System.Windows.Forms.ListBox",
            "System.Windows.Forms.GroupBox"
        };

        // IRootDesigner.SupportedTechnologies is a required override for an IRootDesigner.
        // This designer provides a display using the Windows Forms view technology.
        ViewTechnology[] IRootDesigner.SupportedTechnologies 
        {
            get { return new ViewTechnology[] {ViewTechnology.Default}; }
        }

        // This method returns an object that provides the view for this root designer. 
        object IRootDesigner.GetView(ViewTechnology technology) 
        {
            // If the design environment requests a view technology other than Windows 
            // Forms, this method throws an Argument Exception.
            if (technology != ViewTechnology.Default)            
                throw new ArgumentException("An unsupported view technology was requested", 
                "Unsupported view technology.");            
            
            // Creates the view object if it has not yet been initialized.
            if (view == null)                            
                view = new RootDesignerView(this);          
  
            return view;
        }

        // This method can signal whether to enable or disable the specified
        // ToolboxItem when the component associated with this designer is selected.
        bool IToolboxUser.GetToolSupported(ToolboxItem tool)
        {       
            // Search the blocked type names array for the type name of the tool
            // for which support for is being tested. Return false to indicate the
            // tool should be disabled when the associated component is selected.
            for( int i=0; i<blockedTypeNames.Length; i++ )
                if( tool.TypeName == blockedTypeNames[i] )
                    return false;
            
            // Return true to indicate support for the tool, if the type name of the
            // tool is not located in the blockedTypeNames string array.
            return true;
        }
    
        // This method can perform behavior when the specified tool has been invoked.
        // Invocation of a ToolboxItem typically creates a component or components, 
        // and adds any created components to the associated component.
        void IToolboxUser.ToolPicked(ToolboxItem tool)
        {
        }

        // This control provides a Windows Forms view technology view object that 
        // provides a display for the SampleRootDesigner.
        [DesignerAttribute(typeof(ParentControlDesigner), typeof(IDesigner))]
        internal class RootDesignerView : Control
        {
            // This field stores a reference to a designer.
            private IDesigner m_designer;

            public RootDesignerView(IDesigner designer)
            {
                // Perform basic control initialization.
                m_designer = designer;
                BackColor = Color.Blue;
                Font = new Font(Font.FontFamily.Name, 24.0f);                
            }

            // This method is called to draw the view for the SampleRootDesigner.
            protected override void OnPaint(PaintEventArgs pe)
            {
                base.OnPaint(pe);
                // Draw the name of the component in large letters.
                pe.Graphics.DrawString(m_designer.Component.Site.Name, Font, Brushes.Yellow, ClientRectangle);
            }
        }
    }
}

플랫폼

Windows 98, Windows 2000 SP4, Windows Millennium Edition, Windows Server 2003, Windows XP Media Center Edition, Windows XP Professional x64 Edition, Windows XP SP2, Windows XP Starter Edition

.NET Framework에서 모든 플래폼의 모든 버전을 지원하지는 않습니다. 지원되는 버전의 목록은 시스템 요구 사항을 참조하십시오.

다음을 통해 공유

ToolboxItemFilterType 열거형

구문

멤버

예제

플랫폼

버전 정보

.NET Framework

참고 항목

참조

추가 리소스