이 항목에서는 XPS OM에서 다양한 유형의 브러시를 사용하는 방법을 설명합니다.
XPS OM의 브러시는 IXpsOMBrush 인터페이스 기반으로 하며 다음을 포함합니다.
- 타일 브러시
- IXpsOMGradientBrush 인터페이스
- IXpsOMLinearGradientBrush 인터페이스
- IXpsOMRadialGradientBrush 인터페이스
그라데이션 브러시
코드 예제
단색 브러시 만들기
다음 코드 예제에서는 코드에 정의 된 색 값에서 단색 브러시를 만듭니다.
HRESULT hr = S_OK;
XPS_COLOR xpsColor;
IXpsOMSolidColorBrush *brush;
// creates a solid red brush
xpsColor.colorType = XPS_COLOR_TYPE_SRGB;
xpsColor.value.sRGB.alpha = 0xFF;
xpsColor.value.sRGB.red = 0xFF;
xpsColor.value.sRGB.green = 0x00;
xpsColor.value.sRGB.blue = 0x00;
hr = xpsFactory->CreateSolidColorBrush(
&xpsColor,
NULL,
reinterpret_cast<IXpsOMSolidColorBrush**>(&brush));
// use brush
// when finished with brush, release pointer
brush->Release();
시각적 브러시 만들기
다음 코드 예제에서는 시각적 개체에서 브러시를 만듭니다.
HRESULT hr = S_OK;
IXpsOMVisualBrush *brush;
XPS_RECT viewBoxRect = {0,0,0,0};
XPS_RECT viewPortRect = {0,0,0,0};
// set viewBoxRect to define the portion of the visual to use
// as the brush.
//
// set viewPortRect to define the location and size of the
// the brush in the destination
//
// create the brush
hr = xpsFactory->CreateVisualBrush (
&viewBoxRect,
&viewPortRect,
reinterpret_cast<IXpsOMVisualBrush**>(&brush));
// assign the visual object
// brushVisual points to a visual
// that is defined outside of this example
hr = brush->SetVisualLocal (brushVisual);
// use brush
// when finished with brush, release pointer
brush->Release();
이미지 브러시 만들기
XPS OM 이미지 배치코드 예제를 참조하세요.
선형 그라데이션 브러시 만들기
다음 코드 예제에서는 선형 그라데이션 브러시를 만듭니다. 그라데이션에는 두 개의 그라데이션 정지점이 있습니다.
HRESULT hr = S_OK;
XPS_COLOR xpsColorStop;
IXpsOMGradientStop *xpsGradientStop1, *xpsGradientStop2;
IXpsOMLinearGradientBrush *brush;
XPS_POINT startPoint, endPoint;
// define the start color
xpsColorStop.colorType = XPS_COLOR_TYPE_SRGB;
xpsColorStop.value.sRGB.alpha = 0xFF;
xpsColorStop.value.sRGB.red = 0xE4;
xpsColorStop.value.sRGB.green = 0x3B;
xpsColorStop.value.sRGB.blue = 0x2F;
// create a gradient stop by setting the color and location
// for the beginning of the gradient
hr = xpsFactory->CreateGradientStop(
&xpsColorStop,
NULL,
0.0f,
&xpsGradientStop1);
startPoint.x = 375.75f;
startPoint.y = 18.0f;
// define the end color
xpsColorStop.colorType = XPS_COLOR_TYPE_SRGB;
xpsColorStop.value.sRGB.alpha = 0xFF;
xpsColorStop.value.sRGB.red = 0xEF;
xpsColorStop.value.sRGB.green = 0x79;
xpsColorStop.value.sRGB.blue = 0x2F;
// create a gradient stop by setting the color and location
// for the end of the gradient
hr = xpsFactory->CreateGradientStop(
&xpsColorStop,
NULL,
1.0f,
&xpsGradientStop2);
endPoint.x = 375.75f;
endPoint.y = 134.6f;
// create the brush
hr = xpsFactory->CreateLinearGradientBrush(
xpsGradientStop1,
xpsGradientStop2,
&startPoint,
&endPoint,
&brush);
// release gradient stops after creating brush
xpsGradientStop1->Release();
xpsGradientStop2->Release();
// when finished with brush, release pointer to brush
brush->Release();
관련 항목