Resources for Microsoft Defender for Endpoint on macOS
Applies to:
- Microsoft Defender for Endpoint Plan 1
- Microsoft Defender for Endpoint Plan 2
- Microsoft Defender XDR
Want to experience Microsoft Defender for Endpoint? Sign up for a free trial.
Collecting diagnostic information
If you can reproduce a problem, increase the logging level, run the system for some time, and then restore the logging level to the default.
Increase logging level:
mdatp log level set --level debug
Log level configured successfully
Reproduce the problem.
Run
sudo mdatp diagnostic create
to back up the Microsoft Defender for Endpoint logs. The files are stored inside a.zip
archive. This command also prints the file path to the backup after the operation succeeds.Tip
By default, diagnostic logs are saved to
/Library/Application Support/Microsoft/Defender/wdavdiag/
. To change the directory where diagnostic logs are saved, pass--path [directory]
to the below command, replacing[directory]
with the desired directory.sudo mdatp diagnostic create
Diagnostic file created: "/Library/Application Support/Microsoft/Defender/wdavdiag/932e68a8-8f2e-4ad0-a7f2-65eb97c0de01.zip"
Restore logging level.
mdatp log level set --level info
Log level configured successfully
Logging installation issues
If an error occurs during installation, the installer reports a general failure only. The detailed log is saved to /Library/Logs/Microsoft/mdatp/install.log
. If you experience issues during installation, send us this file when you open your support case so we can help diagnose the cause.
For further troubleshooting installation issues, see Troubleshoot installation issues for Microsoft Defender for Endpoint on macOS.
Uninstalling
Note
Before uninstalling Microsoft Defender for Endpoint on macOS, offboard each device per Offboard non-Windows devices.
There are several ways to uninstall Microsoft Defender for Endpoint on macOS. Although centrally managed uninstallation is available on JAMF, it's not yet available for Microsoft Intune.
Interactive uninstallation
- Open Finder > Applications. Right click on Microsoft Defender for Endpoint, and then select Move to Trash.
Supported output types
Supports table and JSON format output types. For each command, there's a default output behavior. You can modify the output in your preferred output format using the following commands:
-output json
-output table
From the command line
sudo '/Library/Application Support/Microsoft/Defender/uninstall/uninstall'
Using JAMF Pro
To uninstall Microsoft Defender for Endpoint on macOS using JAMF Pro upload the offboarding profile.
The offboarding profile should be uploaded without any modifications, and with Preference Domain name set to com.microsoft.wdav.atp.offboarding
, as shown in the following image:
Note
If you have trouble uninstalling Defender for Endpoint on Mac, and you see in your reports an item for Microsoft Defender Endpoint Security Extension, follow these steps:
- Reinstall the Microsoft Defender app.
- Drag Microsoft Defender.app to Trash.
- Run this command:
sudo /Library/Application Support/Microsoft/Defender/uninstall/install_helper execute --path '/Library/Application Support/Microsoft/Defender/uninstall/uninstall' --args --post-uninstall-hook
. - Restart the device.
Configuring from the command line
Important tasks, such as controlling product settings and triggering on-demand scans, can be done by using the command line:
Group | Scenario | Command |
---|---|---|
Configuration | Turn on/off antivirus in passive mode | mdatp config passive-mode --value [enabled/disabled] |
Configuration | Turn on/off real-time protection | mdatp config real-time-protection --value [enabled/disabled] |
Configuration | Turn on/off behavior monitoring | mdatp config behavior-monitoring --value [enabled/disabled] |
Configuration | Turn on/off cloud protection | mdatp config cloud --value [enabled/disabled] |
Configuration | Turn on/off product diagnostics | mdatp config cloud-diagnostic --value [enabled/disabled] |
Configuration | Turn on/off automatic sample submission | mdatp config cloud-automatic-sample-submission --value [enabled/disabled] |
Configuration | Turn on/audit/off PUA protection | mdatp threat policy set --type potentially_unwanted_application -- action [block/audit/off |
Configuration | Add/remove an antivirus exclusion for a process | mdatp exclusion process [add/remove] --path [path-to-process] or mdatp exclusion process [add\|remove] --name [process-name] |
Configuration | Add/remove an antivirus exclusion for a file | mdatp exclusion file [add/remove] --path [path-to-file] |
Configuration | Add/remove an antivirus exclusion for a directory | mdatp exclusion folder [add/remove] --path [path-to-directory] |
Configuration | Add/remove an antivirus exclusion for a file extension | mdatp exclusion extension [add/remove] --name [extension] |
Configuration | List all antivirus exclusions | mdatp exclusion list |
Configuration | Configure degree of parallelism for on-demand scans | mdatp config maximum-on-demand-scan-threads --value [numerical-value-between-1-and-64] |
Configuration | Turn on/off scans after security intelligence updates | mdatp config scan-after-definition-update --value [enabled/disabled] |
Configuration | Turn on/off archive scanning (on-demand scans only) | mdatp config scan-archives --value [enabled/disabled] |
Configuration | Turn on/off file hash computation | mdatp config enable-file-hash-computation --value [enabled/disabled] |
Protection | Scan a path | mdatp scan custom --path [path] [--ignore-exclusions] |
Protection | Do a quick scan | mdatp scan quick |
Protection | Do a full scan | mdatp scan full |
Protection | Cancel an ongoing on-demand scan | mdatp scan cancel |
Protection | Request a security intelligence update | mdatp definitions update |
Configuration | Add a threat name to the allowed list | mdatp threat allowed add --name [threat-name] |
Configuration | Remove a threat name from the allowed list | mdatp threat allowed remove --name [threat-name] |
Configuration | List all allowed threat names | mdatp threat allowed list |
Protection history | Print the full protection history | mdatp threat list |
Protection history | Get threat details | mdatp threat get --id [threat-id] |
Quarantine management | List all quarantined files | mdatp threat quarantine list |
Quarantine management | Remove all files from the quarantine | mdatp threat quarantine remove-all |
Quarantine management | Add a file detected as a threat to the quarantine | mdatp threat quarantine add --id [threat-id] |
Quarantine management | Remove a file detected as a threat from the quarantine | mdatp threat quarantine remove --id [threat-id] |
Quarantine management | Restore a file from the quarantine. Available in Defender for Endpoint version before 101.23092.0012. | mdatp threat quarantine restore --id [threat-id] --path [destination-folder] |
Quarantine management | Restore a file from the quarantine with Threat ID. Available in Defender for Endpoint version 101.23092.0012 or later. | mdatp threat restore threat-id --id [threat-id] --destination-path [destination-folder] |
Quarantine management | Restore a file from the quarantine with Threat Original Path. Available in Defender for Endpoint version 101.23092.0012 or later. | mdatp threat restore threat-path --path [threat-original-path] --destination-path [destination-folder] |
Network Protection Configuration | Configure the Network Protection enforcement level | mdatp config network-protection enforcement-level --value [Block/Audit/Disabled] |
Network Protection management | Check Network protection was started successfully | mdatp health --field network_protection_status |
Device Control management | Is Device Control enabled, and what is the Default Enforcement? | mdatp device-control policy preferences list |
Device Control management | What Device Control policy is enabled? | mdatp device-control policy rules list |
Device Control management | What Device Control policy groups are enabled? | mdatp device-control policy groups list |
Configuration | Turn on/off data loss prevention | mdatp config data_loss_prevention --value [enabled/disabled] |
Diagnostics | Change the log level | mdatp log level set --level [error/warning/info/verbose] |
Diagnostics | Generate diagnostic logs | mdatp diagnostic create --path [directory] |
Health | Check the product's health | mdatp health |
Health | Check for a specific product attribute | mdatp health --field [attribute: healthy/licensed/engine_version...] |
EDR | EDR list exclusions (root) | mdatp edr exclusion list [processes|paths|extensions|all] |
EDR | Set/Remove tag, only GROUP supported | mdatp edr tag set --name GROUP --value [name] |
EDR | Remove group tag from device | mdatp edr tag remove --tag-name [name] |
EDR | Add Group ID | mdatp edr group-ids --group-id [group] |
How to enable autocompletion
To enable autocompletion in bash, run the following command and restart the Terminal session:
echo "source /Applications/Microsoft\ Defender.app/Contents/Resources/Tools/mdatp_completion.bash" >> ~/.bash_profile
To enable autocompletion in zsh:
Check whether autocompletion is enabled on your device:
cat ~/.zshrc | grep autoload
If the preceding command doesn't produce any output, you can enable autocompletion using the following command:
echo "autoload -Uz compinit && compinit" >> ~/.zshrc
Run the following commands to enable autocompletion for Microsoft Defender for Endpoint on macOS and restart the Terminal session:
sudo mkdir -p /usr/local/share/zsh/site-functions sudo ln -svf "/Applications/Microsoft Defender.app/Contents/Resources/Tools/mdatp_completion.zsh" /usr/local/share/zsh/site-functions/_mdatp
Client Microsoft Defender for Endpoint quarantine directory
/Library/Application Support/Microsoft/Defender/quarantine/
contains the files quarantined by mdatp
. The files are named after the threat trackingId. The current trackingIds are shown with mdatp threat list
.
Microsoft Defender for Endpoint portal information
The Microsoft Defender for Endpoint blog, EDR capabilities for macOS have now arrived provides detailed guidance on what to expect.
Tip
Do you want to learn more? Engage with the Microsoft Security community in our Tech Community: Microsoft Defender for Endpoint Tech Community.