Rediģēt

Kopīgot, izmantojot


Azure SQL Database and Azure Synapse IP firewall rules

Applies to: Azure SQL Database Azure Synapse Analytics

When you create a new server in Azure SQL Database or Azure Synapse Analytics named mysqlserver, for example, a server-level firewall blocks all access to the public endpoint for the server (which is accessible at mysqlserver.database.windows.net). For simplicity, SQL Database is used to refer to both SQL Database and Azure Synapse Analytics. This article does not apply to Azure SQL Managed Instance. For information about network configuration, see Connect your application to Azure SQL Managed Instance.

Note

Microsoft Entra ID was previously known as Azure Active Directory (Azure AD).

How the firewall works

Connection attempts from the internet and Azure must pass through the firewall before they reach your server or database, as the following diagram shows.

Firewall configuration diagram

Important

Azure Synapse only supports server-level IP firewall rules. It doesn't support database-level IP firewall rules.

Server-level IP firewall rules

These rules enable clients to access your entire server, that is, all the databases managed by the server. The rules are stored in the master database. The maximum number of server-level IP firewall rules is limited to 256 for a server. If you have the Allow Azure Services and resources to access this server setting enabled, this counts as a single firewall rule for the server.

You can configure server-level IP firewall rules by using the Azure portal, PowerShell, or Transact-SQL statements.

Note

The maximum number of server-level IP firewall rules is limited to 256 when configuring using the Azure portal.

  • To use the portal or PowerShell, you must be the subscription owner or a subscription contributor.
  • To use Transact-SQL, you must connect to the master database as the server-level principal login or as the Microsoft Entra administrator. (A server-level IP firewall rule must first be created by a user who has Azure-level permissions.)

Note

By default, during creation of a new logical SQL server from the Azure portal, the Allow Azure Services and resources to access this server setting is set to No.

Database-level IP firewall rules

Database-level IP firewall rules enable clients to access certain (secure) databases. You create the rules for each database (including the master database), and they're stored in the individual database.

  • You can only create and manage database-level IP firewall rules for master and user databases by using Transact-SQL statements and only after you configure the first server-level firewall.
  • If you specify an IP address range in the database-level IP firewall rule that's outside the range in the server-level IP firewall rule, only those clients that have IP addresses in the database-level range can access the database.
  • The default value is up to 256 database-level IP firewall rules for a database. For more information about configuring database-level IP firewall rules, see the example later in this article and see sp_set_database_firewall_rule (Azure SQL Database).

Recommendations for how to set firewall rules

We recommend that you use database-level IP firewall rules whenever possible. This practice enhances security and makes your database more portable. Use server-level IP firewall rules for administrators. Also use them when you have many databases that have the same access requirements, and you don't want to configure each database individually.

Note

For information about portable databases in the context of business continuity, see Authentication requirements for disaster recovery.

Server-level versus database-level IP firewall rules

Should users of one database be fully isolated from another database?

If yes, use database-level IP firewall rules to grant access. This method avoids using server-level IP firewall rules, which permit access through the firewall to all databases. That would reduce the depth of your defenses.

Do users at the IP addresses need access to all databases?

If yes, use server-level IP firewall rules to reduce the number of times that you have to configure IP firewall rules.

Does the person or team who configures the IP firewall rules only have access through the Azure portal, PowerShell, or the REST API?

If so, you must use server-level IP firewall rules. Database-level IP firewall rules can only be configured through Transact-SQL.

Is the person or team who configures the IP firewall rules prohibited from having high-level permission at the database level?

If so, use server-level IP firewall rules. You need at least CONTROL DATABASE permission at the database level to configure database-level IP firewall rules through Transact-SQL.

Does the person or team who configures or audits the IP firewall rules centrally manage IP firewall rules for many (perhaps hundreds) of databases?

In this scenario, best practices are determined by your needs and environment. Server-level IP firewall rules might be easier to configure, but scripting can configure rules at the database-level. And even if you use server-level IP firewall rules, you might need to audit database-level IP firewall rules to see if users with CONTROL permission on the database create database-level IP firewall rules.

Can I use a mix of server-level and database-level IP firewall rules?

Yes. Some users, such as administrators, might need server-level IP firewall rules. Other users, such as users of a database application, might need database-level IP firewall rules.

Connections from the internet

When a computer tries to connect to your server from the internet, the firewall first checks the originating IP address of the request against the database-level IP firewall rules for the database that the connection requests.

  • If the address is within a range that's specified in the database-level IP firewall rules, the connection is granted to the database that contains the rule.
  • If the address isn't within a range in the database-level IP firewall rules, the firewall checks the server-level IP firewall rules. If the address is within a range that's in the server-level IP firewall rules, the connection is granted. Server-level IP firewall rules apply to all databases managed by the server.
  • If the address isn't within a range that's in any of the database-level or server-level IP firewall rules, the connection request fails.

Note

To access Azure SQL Database from your local computer, ensure that the firewall on your network and local computer allow outgoing communication on TCP port 1433.

Connections from inside Azure

To allow applications hosted inside Azure to connect to your SQL server, Azure connections must be enabled. To enable Azure connections, there must be a firewall rule with starting and ending IP addresses set to 0.0.0.0. This recommended rule is only applicable to Azure SQL Database.

When an application from Azure tries to connect to the server, the firewall checks that Azure connections are allowed by verifying this firewall rule exists. This can be turned on directly from the Azure portal pane by switching the Allow Azure Services and resources to access this server to ON in the Firewalls and virtual networks settings. Switching the setting to ON creates an inbound firewall rule for IP 0.0.0.0 - 0.0.0.0 named AllowAllWindowsAzureIps. The rule can be viewed in your master database sys.firewall_rules view. Use PowerShell or the Azure CLI to create a firewall rule with start and end IP addresses set to 0.0.0.0 if you're not using the portal.

Important

This option configures the firewall to allow all connections from Azure, including connections from the subscriptions of other customers. If you select this option, make sure that your login and user permissions limit access to authorized users only.

Permissions

To be able to create and manage IP firewall rules for the Azure SQL Server, you will need to either be:

Create and manage IP firewall rules

You create the first server-level firewall setting by using the Azure portal or programmatically by using Azure PowerShell, Azure CLI, or an Azure REST API. You create and manage additional server-level IP firewall rules by using these methods or Transact-SQL.

Important

Database-level IP firewall rules can only be created and managed by using Transact-SQL.

To improve performance, server-level IP firewall rules are temporarily cached at the database level. To refresh the cache, see DBCC FLUSHAUTHCACHE.

Tip

You can use Database Auditing to audit server-level and database-level firewall changes.

Use the Azure portal to manage server-level IP firewall rules

To set a server-level IP firewall rule in the Azure portal, go to the overview page for your database or your server.

Tip

For a tutorial, see Create a database using the Azure portal.

From the database overview page

  1. To set a server-level IP firewall rule from the database overview page, select Set server firewall on the toolbar, as the following image shows.

    Screenshot of the set server firewall setting in the Azure portal.

    The Networking page for the server opens.

  2. Add a rule in the Firewall rules section to add the IP address of the computer that you're using, and then select Save. A server-level IP firewall rule is created for your current IP address.

    Screenshot shows the Networking page where you can set the server-level IP firewall rules.

From the server overview page

The overview page for your server opens. It shows the fully qualified server name (such as mynewserver20170403.database.windows.net) and provides options for further configuration.

  1. To set a server-level rule from this page, select Networking from the Settings menu on the left side.

  2. Add a rule in the Firewall rules section to add the IP address of the computer that you're using, and then select Save. A server-level IP firewall rule is created for your current IP address.

Use Transact-SQL to manage IP firewall rules

Catalog view or stored procedure Level Description
sys.firewall_rules Server Displays the current server-level IP firewall rules
sp_set_firewall_rule Server Creates or updates server-level IP firewall rules
sp_delete_firewall_rule Server Removes server-level IP firewall rules
sys.database_firewall_rules Database Displays the current database-level IP firewall rules
sp_set_database_firewall_rule Database Creates or updates the database-level IP firewall rules
sp_delete_database_firewall_rule Databases Removes database-level IP firewall rules

The following example reviews the existing rules, enables a range of IP addresses on the server Contoso, and deletes an IP firewall rule:

SELECT * FROM sys.firewall_rules ORDER BY name;

Next, add a server-level IP firewall rule.

EXECUTE sp_set_firewall_rule @name = N'ContosoFirewallRule',
   @start_ip_address = '192.168.1.1', @end_ip_address = '192.168.1.10'

To delete a server-level IP firewall rule, execute the sp_delete_firewall_rule stored procedure. The following example deletes the rule ContosoFirewallRule:

EXECUTE sp_delete_firewall_rule @name = N'ContosoFirewallRule'

Use PowerShell to manage server-level IP firewall rules

Note

This article uses the Azure Az PowerShell module, which is the recommended PowerShell module for interacting with Azure. To get started with the Az PowerShell module, see Install Azure PowerShell. To learn how to migrate to the Az PowerShell module, see Migrate Azure PowerShell from AzureRM to Az.

Important

The PowerShell Azure Resource Manager module is still supported by Azure SQL Database, but all development is now for the Az.Sql module. For these cmdlets, see AzureRM.Sql. The arguments for the commands in the Az and AzureRm modules are substantially identical.

Cmdlet Level Description
Get-AzSqlServerFirewallRule Server Returns the current server-level firewall rules
New-AzSqlServerFirewallRule Server Creates a new server-level firewall rule
Set-AzSqlServerFirewallRule Server Updates the properties of an existing server-level firewall rule
Remove-AzSqlServerFirewallRule Server Removes server-level firewall rules

The following example uses PowerShell to set a server-level IP firewall rule:

New-AzSqlServerFirewallRule -ResourceGroupName "myResourceGroup" `
    -ServerName $servername `
    -FirewallRuleName "ContosoIPRange" -StartIpAddress "192.168.1.0" -EndIpAddress "192.168.1.255"

Tip

For $servername specify the server name and not the fully qualified DNS name e.g. specify mysqldbserver instead of mysqldbserver.database.windows.net

For PowerShell examples in the context of a quickstart, see Create DB - PowerShell and Create a single database and configure a server-level IP firewall rule using PowerShell.

Use CLI to manage server-level IP firewall rules

Cmdlet Level Description
az sql server firewall-rule create Server Creates a server IP firewall rule
az sql server firewall-rule list Server Lists the IP firewall rules on a server
az sql server firewall-rule show Server Shows the detail of an IP firewall rule
az sql server firewall-rule update Server Updates an IP firewall rule
az sql server firewall-rule delete Server Deletes an IP firewall rule

The following example uses CLI to set a server-level IP firewall rule:

az sql server firewall-rule create --resource-group myResourceGroup --server $servername \
-n ContosoIPRange --start-ip-address 192.168.1.0 --end-ip-address 192.168.1.255

Tip

For $servername, specify the server name and not the fully qualified DNS name. For example, use mysqldbserver instead of mysqldbserver.database.windows.net.

For a CLI example in the context of a quickstart, see Create DB - Azure CLI and Create a single database and configure a server-level IP firewall rule using the Azure CLI.

For Azure Synapse Analytics, refer to the following examples:

Cmdlet Level Description
az synapse workspace firewall-rule create Server Create a firewall rule
az synapse workspace firewall-rule delete Server Delete a firewall rule
az synapse workspace firewall-rule list Server List all firewall rules
az synapse workspace firewall-rule show Server Get a firewall rule
az synapse workspace firewall-rule update Server Update a firewall rule
az synapse workspace firewall-rule wait Server Place the CLI in a waiting state until a condition of a firewall rule is met

The following example uses CLI to set a server-level IP firewall rule in Azure Synapse:

az synapse workspace firewall-rule create --name AllowAllWindowsAzureIps --workspace-name $workspacename --resource-group $resourcegroupname --start-ip-address 0.0.0.0 --end-ip-address 0.0.0.0

Use a REST API to manage server-level IP firewall rules

API Level Description
List firewall rules Server Displays the current server-level IP firewall rules
Create or update firewall rules Server Creates or updates server-level IP firewall rules
Delete firewall rules Server Removes server-level IP firewall rules
Get firewall rules Server Gets server-level IP firewall rules

Troubleshoot the database firewall

Consider the following points when access to Azure SQL Database doesn't behave as you expect.

  • Local firewall configuration:

    Before your computer can access Azure SQL Database, you may need to create a firewall exception on your computer for TCP port 1433. To make connections inside the Azure cloud boundary, you may have to open additional ports. For more information, see the "SQL Database: Outside vs inside" section of Ports beyond 1433 for ADO.NET 4.5 and Azure SQL Database.

  • Network address translation:

    Because of network address translation (NAT), the IP address that's used by your computer to connect to Azure SQL Database may be different than the IP address in your computer's IP configuration settings. To view the IP address that your computer is using to connect to Azure:

    1. Sign in to the portal.
    2. Go to the Configure tab on the server that hosts your database.
    3. The Current Client IP Address is displayed in the Allowed IP Addresses section. Select Add for Allowed IP Addresses to allow this computer to access the server.
  • Changes to the allow list haven't taken effect yet:

    There may be up to a five-minute delay for changes to the Azure SQL Database firewall configuration to take effect.

  • The login isn't authorized, or an incorrect password was used:

    If a login doesn't have permissions on the server or the password is incorrect, the connection to the server is denied. Creating a firewall setting only gives clients an opportunity to try to connect to your server. The client must still provide the necessary security credentials. For more information about preparing logins, see Controlling and granting database access.

  • Dynamic IP address:

    If you have an internet connection that uses dynamic IP addressing and you have trouble getting through the firewall, try one of the following solutions:

    • Ask your internet service provider for the IP address range that's assigned to your client computers that access the server. Add that IP address range as an IP firewall rule.
    • Get static IP addressing instead for your client computers. Add the IP addresses as IP firewall rules.

Next steps