Rediģēt

Kopīgot, izmantojot

Troubleshooting guide for Azure Service Bus

  • Raksts

This article provides troubleshooting tips and recommendations for a few issues that you see when using Azure Service Bus.

Connectivity issues

Time out when connecting to service

Depending on the host environment and network, a connectivity issue might present to applications as either a TimeoutException, OperationCanceledException, or a ServiceBusException with Reason of ServiceTimeout and most often occurs when the client can't find a network path to the service.

To troubleshoot:

  • Verify that the connection string or fully qualified domain name that you specified when creating the client is correct. For information on how to acquire a connection string, see Get a Service Bus connection string.
  • Check the firewall and port permissions in your hosting environment. Check that the Advanced Message Queuing Protocol (AMQP) ports 5671 and 5672 are open and that the endpoint is allowed through the firewall.
  • Try using the Web Socket transport option, which connects using port 443. For details, see configure the transport.
  • See if your network is blocking specific IP addresses. For details, see What IP addresses do I need to allow?
  • If applicable, verify the proxy configuration. For details, see: Configuring the transport
  • For more information about troubleshooting network connectivity, see: [Connectivity, certificate, or timeout issues][#connectivity-certificate-or-timeout-issues].

Secure socket layer (SSL) handshake failures

This error can occur when an intercepting proxy is used. To verify, We recommend that you test the application in the host environment with the proxy disabled.

Socket exhaustion errors

Applications should prefer treating the Service Bus types as singletons, creating and using a single instance through the lifetime of the application. Each new ServiceBusClient created results in a new AMQP connection, which uses a socket. The ServiceBusClient type manages the connection for all types created from that instance. Each ServiceBusReceiver, ServiceBusSessionReceiver, ServiceBusSender, and ServiceBusProcessor manages its own AMQP link for the associated Service Bus entity. When you use ServiceBusSessionProcessor, multiple AMQP links are established depending on the number of sessions that are being processed concurrently.

The clients are safe to cache when idle; they ensure efficient management of network, CPU, and memory use, minimizing their impact during periods of inactivity. It's also important that either CloseAsync or DisposeAsync is called when a client is no longer needed to ensure that network resources are properly cleaned up.

Adding components to the connection string doesn't work

The current generation of the Service Bus client library supports connection strings only in the form published by the Azure portal. The connection strings are intended to provide basic location and shared key information only. Configuring behavior of the clients is done through its options.

Previous generations of the Service Bus clients allowed for some behavior to be configured by adding key/value components to a connection string. These components are no longer recognized and have no effect on client behavior.

"TransportType=AmqpWebSockets" alternative

To configure Web Sockets as the transport type, see Configuring the transport.

"Authentication=Managed Identity" Alternative

To authenticate with Managed Identity, see: Identity and Shared Access Credentials. For more information about the Azure.Identity library, see Authentication and the Azure SDK.

Logging and diagnostics

The Service Bus client library is fully instrumented for logging information at various levels of detail using the .NET EventSource to emit information. Logging is performed for each operation and follows the pattern of marking the starting point of the operation, its completion, and any exceptions encountered. Additional information that might offer insight is also logged in the context of the associated operation.

Enable logging

The Service Bus client logs are available to any EventListener by opting into the sources starting with Azure-Messaging-ServiceBus or by opting into all sources that have the trait AzureEventSource. To make capturing logs from the Azure client libraries easier, the Azure.Core library used by Service Bus offers an AzureEventSourceListener.

For more information, see: Logging with the Azure SDK for .NET.

Distributed tracing

The Service Bus client library supports distributed tracing through integration with the Application Insights SDK. It also has experimental support for the OpenTelemetry specification via the .NET ActivitySource type introduced in .NET 5. In order to enable ActivitySource support for use with OpenTelemetry, see ActivitySource support.

In order to use the GA DiagnosticActivity support, you can integrate with the Application Insights SDK. More details can be found in ApplicationInsights with Azure Monitor.

The library creates the following spans:

Message
ServiceBusSender.Send
ServiceBusSender.Schedule
ServiceBusSender.Cancel
ServiceBusReceiver.Receive
ServiceBusReceiver.ReceiveDeferred
ServiceBusReceiver.Peek
ServiceBusReceiver.Abandon
ServiceBusReceiver.Complete
ServiceBusReceiver.DeadLetter
ServiceBusReceiver.Defer
ServiceBusReceiver.RenewMessageLock
ServiceBusSessionReceiver.RenewSessionLock
ServiceBusSessionReceiver.GetSessionState
ServiceBusSessionReceiver.SetSessionState
ServiceBusProcessor.ProcessMessage
ServiceBusSessionProcessor.ProcessSessionMessage
ServiceBusRuleManager.CreateRule
ServiceBusRuleManager.DeleteRule
ServiceBusRuleManager.GetRules

Most of the spans are self-explanatory and are started and stopped during the operation that bears its name. The span that ties the others together is Message. The way that the message is traced is via the Diagnostic-Id that is set in the ServiceBusMessage.ApplicationProperties property by the library during send and schedule operations. In Application Insights, Message spans are displayed as linking out to the various other spans that were used to interact with the message, for example, the ServiceBusReceiver.Receive span, the ServiceBusSender.Send span, and the ServiceBusReceiver.Complete span would all be linked from the Message span. Here's an example of what this looks like in Application Insights:

Image showing a sample distributed trace.

In the above screenshot, you see the end-to-end transaction that can be viewed in Application Insights in the portal. In this scenario, the application is sending messages and using the ServiceBusSessionProcessor to process them. The Message activity is linked to ServiceBusSender.Send, ServiceBusReceiver.Receive, ServiceBusSessionProcessor.ProcessSessionMessage, and ServiceBusReceiver.Complete.

Note

For more information, see Distributed tracing and correlation through Service Bus messaging.

Troubleshoot sender issues

Can't send a batch with multiple partition keys

When an app sends a batch to a partition-enabled entity, all messages included in a single send operation must have the same PartitionKey. If your entity is session-enabled, the same requirement holds true for the SessionId property. In order to send messages with different PartitionKey or SessionId values, group the messages in separate ServiceBusMessageBatch instances or include them in separate calls to the SendMessagesAsync overload that takes a set of ServiceBusMessage instances.

Batch fails to send

A message batch is either ServiceBusMessageBatch containing two or more messages, or a call to SendMessagesAsync where two or more messages are passed in. The service doesn't allow a message batch to exceed 1 MB. This behavior is true whether or not the Premium large message support feature is enabled. If you intend to send a message greater than 1 MB, it must be sent individually rather than grouped with other messages. Unfortunately, the ServiceBusMessageBatch type doesn't currently support validating that a batch doesn't contain any messages greater than 1 MB as the size is constrained by the service and might change. So, if you intend to use the premium large message support feature, ensure that you send messages over 1 MB individually.

Troubleshoot receiver issues

Number of messages returned doesn't match number requested in batch receive

When attempting to do a batch receive operation, that is, passing a maxMessages value of two or greater to the ReceiveMessagesAsync method, you aren't guaranteed to receive the number of messages requested, even if the queue or subscription has that many messages available at that time, and even if the entire configured maxWaitTime hasn't yet elapsed. To maximize throughput and avoid lock expiration, once the first message comes over the wire, the receiver waits an additional 20 milliseconds for any additional messages before dispatching the messages for processing. The maxWaitTime controls how long the receiver waits to receive the first message - subsequent messages are waited for 20 milliseconds. Therefore, your application shouldn't assume that all messages available are received in one call.

Message or session lock is lost before lock expiration time

The Service Bus service uses the AMQP protocol, which is stateful. Due to the nature of the protocol, if the link that connects the client and the service is detached after a message is received, but before the message is settled, the message isn't able to be settled on reconnecting the link. Links can be detached due to a short-term transient network failure, a network outage, or due to the service enforced 10-minute idle timeout. The reconnection of the link happens automatically as a part of any operation that requires the link, that is, settling or receiving messages. In this situation, you receive a ServiceBusException with Reason of MessageLockLost or SessionLockLost even if the lock expiration time hasn't yet passed.

How to browse scheduled or deferred messages

Scheduled and deferred messages are included when peeking messages. They can be identified by the ServiceBusReceivedMessage.State property. Once you have the SequenceNumber of a deferred message, you can receive it with a lock via the ReceiveDeferredMessagesAsync method.

When working with topics, you can't peek scheduled messages on the subscription, as the messages remain in the topic until the scheduled enqueue time. As a workaround, you can construct a ServiceBusReceiver passing in the topic name in order to peek such messages. No other operations with the receiver work when using a topic name.

How to browse session messages across all sessions

You can use a regular ServiceBusReceiver to peek across all sessions. To peek for a specific session you can use the ServiceBusSessionReceiver, but you need to obtain a session lock.

NotSupportedException thrown when accessing message body

This issue occurs most often in interop scenarios when receiving a message sent from a different library that uses a different AMQP message body format. If you're interacting with these types of messages, see the AMQP message body sample to learn how to access the message body.

Troubleshoot processor issues

Autolock renewal isn't working

Autolock renewal relies on the system time to determine when to renew a lock for a message or session. If your system time isn't accurate, for example, your clock is slow, then lock renewal might not happen before the lock is lost. Ensure that your system time is accurate if autolock renewal isn't working.

Processor appears to hang or have latency issues when using high concurrency

This behavior is often caused by thread starvation, particularly when using the session processor and using a very high value for MaxConcurrentSessions, relative to the number of cores on the machine. The first thing to check would be to make sure you aren't doing sync-over-async in any of your event handlers. Sync-over-async is an easy way to cause deadlocks and thread starvation. Even if you aren't doing sync over async, any pure sync code in your handlers could contribute to thread starvation. If you've determined that isn't the issue, for example, because you have pure async code, you can try increasing your [TryTimeout][TryTimeout]. It relieves pressure on the thread pool by reducing the number of context switches and timeouts that occur when using the session processor in particular. The default value for [TryTimeout][TryTimeout] is 60 seconds, but it can be set all the way up to 1 hour. We recommend testing with the TryTimeout set to 5 minutes as a starting point and iterate from there. If none of these suggestions work, you simply need to scale out to multiple hosts, reducing the concurrency in your application, but running the application on multiple hosts to achieve the desired overall concurrency.

Further reading:

Session processor takes too long to switch sessions

This can be configured using the [SessionIdleTimeout][SessionIdleTimeout], which tells the processor how long to wait to receive a message from a session, before giving up and moving to another one. It's useful if you have many sparsely populated sessions, where each session only has a few messages. If you expect that each session will have many messages that trickle in, setting it too low can be counter productive, as it results in unnecessary closing of the session.

Processor stops immediately

This is often observed for demo or testing scenarios. StartProcessingAsync returns immediately after the processor has started. Calling this method won't block and keep your application alive while the processor is running, so you need some other mechanism to do so. For demos or testing, it's sufficient to just add a Console.ReadKey() call after you start the processor. For production scenarios, you'll likely want to use some sort of framework integration like [BackgroundService][BackgroundService] to provide convenient application lifecycle hooks that can be used for starting and disposing the processor.

Troubleshoot transactions

For general information about transactions in Service Bus, see the [Overview of Service Bus transaction processing][Transactions].

Supported operations

Not all operations are supported when using transactions. To see the list of supported transactions, see [Operations within a transaction scope][TransactionOperations].

Timeout

A transaction times out after a [period of time][TransactionTimeout], so it's important that processing that occurs within a transaction scope adheres to this timeout.

Operations in a transaction aren't retried

This is by design. Consider the following scenario - you're attempting to complete a message within a transaction, but there's some transient error that occurs, for example, ServiceBusException with a Reason of ServiceCommunicationProblem. Suppose the request does actually make it to the service. If the client were to retry, the service would see two complete requests. The first complete won't be finalized until the transaction is committed. The second complete isn't able to even be evaluated before the first complete finishes. The transaction on the client is waiting for the complete to finish. This creates a deadlock where the service is waiting for the client to complete the transaction, but the client is waiting for the service to acknowledge the second complete operation. The transaction will eventually time out after 2 minutes, but this is a bad user experience. For this reason, we don't retry operations within a transaction.

Transactions across entities aren't working

In order to perform transactions that involve multiple entities, you need to set the ServiceBusClientOptions.EnableCrossEntityTransactions property to true. For details, see the [Transactions across entities][CrossEntityTransactions] sample.

Quotas

Information about Service Bus quotas can be found [here][ServiceBusQuotas].

Connectivity, certificate, or timeout issues

The following steps help you with troubleshooting connectivity/certificate/timeout issues for all services under *.servicebus.windows.net.

  • Browse to or wget https://<yournamespace>.servicebus.windows.net/. It helps with checking whether you have IP filtering or virtual network or certificate chain issues, which are common when using Java SDK.

    An example of successful message:

    <feed xmlns="http://www.w3.org/2005/Atom"><title type="text">Publicly Listed Services</title><subtitle type="text">This is the list of publicly-listed services currently available.</subtitle><id>uuid:27fcd1e2-3a99-44b1-8f1e-3e92b52f0171;id=30</id><updated>2019-12-27T13:11:47Z</updated><generator>Service Bus 1.1</generator></feed>

    An example of failure error message:

    <Error>
    <Code>400</Code>
    <Detail>
        Bad Request. To know more visit https://aka.ms/sbResourceMgrExceptions. . TrackingId:b786d4d1-cbaf-47a8-a3d1-be689cda2a98_G22, SystemTracker:NoSystemTracker, Timestamp:2019-12-27T13:12:40
    </Detail>
</Error>

  • Run the following command to check if any port is blocked on the firewall. Ports used are 443 (HTTPS), 5671 and 5672 (AMQP) and 9354 (Net Messaging/SBMP). Depending on the library you use, other ports are also used. Here's the sample command that check whether the 5671 port is blocked. C

    tnc <yournamespacename>.servicebus.windows.net -port 5671

    On Linux:

    telnet <yournamespacename>.servicebus.windows.net 5671

  • When there are intermittent connectivity issues, run the following command to check if there are any dropped packets. This command tries to establish 25 different TCP connections every 1 second with the service. Then, you can check how many of them succeeded/failed and also see TCP connection latency. You can download the psping tool from here.

    .\psping.exe -n 25 -i 1 -q <yournamespace>.servicebus.windows.net:5671 -nobanner

    You can use equivalent commands if you're using other tools such as tnc, ping, and so on.

  • Obtain a network trace if the previous steps don't help and analyze it using tools such as Wireshark. Contact Microsoft Support if needed.

  • To find the right IP addresses to add to allowlist for your connections, see What IP addresses do I need to add to allowlist.

On 30 September 2026, we'll retire support of the SBMP protocol for Azure Service Bus, so you'll no longer be able to use this protocol after 30 September 2026. Migrate to the latest Azure Service Bus SDK libraries using the AMQP protocol, which offer critical security updates and improved capabilities, before that date.

For more information, see the support retirement announcement.

Issues that might occur with service upgrades/restarts

Symptoms

  • Requests might be momentarily throttled.
  • There might be a drop in incoming messages/requests.
  • The log file might contain error messages.
  • The applications might be disconnected from the service for a few seconds.

Cause

Backend service upgrades and restarts might cause these issues in your applications.

Resolution

If the application code uses SDK, the retry policy is already built in and active. The application reconnects without significant impact to the application/workflow.

Unauthorized access: Send claims are required

Symptoms

You might see this error when attempting to access a Service Bus topic from Visual Studio on an on-premises computer using a user-assigned managed identity with send permissions.

Service Bus Error: Unauthorized access. 'Send' claim\(s\) are required to perform this operation.

Cause

The identity doesn't have permissions to access the Service Bus topic.

Resolution

To resolve this error, install the Microsoft.Azure.Services.AppAuthentication library. For more information, see Local development authentication.

To learn how to assign permissions to roles, see Authenticate a managed identity with Microsoft Entra ID to access Azure Service Bus resources.

Service Bus Exception: Put token failed

Symptoms

You receive the following error message:

Microsoft.Azure.ServiceBus.ServiceBusException: Put token failed. status-code: 403, status-description: The maximum number of '1000' tokens per connection has been reached.

On 30 September 2026, we'll retire the Azure Service Bus SDK libraries WindowsAzure.ServiceBus, Microsoft.Azure.ServiceBus, and com.microsoft.azure.servicebus, which don't conform to Azure SDK guidelines. We'll also end support of the SBMP protocol, so you'll no longer be able to use this protocol after 30 September 2026. Migrate to the latest Azure SDK libraries, which offer critical security updates and improved capabilities, before that date.

Although the older libraries can still be used beyond 30 September 2026, they'll no longer receive official support and updates from Microsoft. For more information, see the support retirement announcement.

Cause

Number of authentication tokens for concurrent links in a single connection to a Service Bus namespace has exceeded the limit: 1000.

Resolution

Do one of the following steps:

  • Reduce the number of concurrent links in a single connection or use a new connection
  • Use SDKs for Azure Service Bus, which ensures that you don't get into this situation (recommended)

Resource locks don't work when using the data plane SDK

Symptoms

You have configured a delete lock on a Service Bus namespace, but you're able to delete resources in the namespace (queues, topics, etc.) by using the Service Bus Explorer.

Cause

Resource lock is preserved in Azure Resource Manager (control plane) and it doesn't prevent the data plane SDK call from deleting the resource directly from the namespace. The standalone Service Bus Explorer uses the data plane SDK, so the deletion goes through.

Resolution

We recommend that you use the Azure Resource Manager based API via Azure portal, PowerShell, CLI, or Resource Manager template to delete entities so that the resource lock prevents the resources from being accidentally deleted.

Entity is no longer available

Symptoms

You see an error that the entity is no longer available.

Cause

The resource might have been deleted. Follow these steps to identify why the entity was deleted.

  • Check the activity log to see if there's an Azure Resource Manager request for deletion.
  • Check the operational log to see if there was a direct API call for deletion. To learn how to collect an operational log, see Monitor Azure Service Bus. For the schema and an example of an operation log, see Operation logs
  • Check the operation log to see if there was an autodeleteonidle related deletion.

Next steps

See the following articles:

  • Azure Resource Manager exceptions. It list exceptions generated when interacting with Azure Service Bus using Azure Resource Manager (via templates or direct calls).
  • Messaging exceptions. It provides a list of exceptions generated by .NET Framework for Azure Service Bus.