Rediģēt

Kopīgot, izmantojot


Database Engine events and errors (14000 to 14999)

This article contains error message numbers (between the range 14,000 and 14,999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 14,000 and 14,999) for SQL Server 2016 (13.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 14,000 and 14,999) for SQL Server 2017 (14.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 14,000 and 14,999) for SQL Server 2019 (15.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 14,000 and 14,999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

Errors and events (14000 to 14999)

Error Severity Event logged Description
14002 16 No Could not find the 'Sync' subsystem with the task ID %ld.
14003 16 No You must supply a publication name.
14004 16 No %s must be in the current database.
14005 16 No Cannot drop the publication because at least one subscription exists for this publication. Drop all subscriptions to the publication before attempting to drop the publication. If the problem persists, replication metadata might be incorrect; consult Books Online for troubleshooting information.
14006 16 No Could not drop the publication.
14008 11 No There are no publications.
14009 11 No There are no articles for publication '%s'.
14010 16 No The remote server '%s' is not defined as a subscription server. Ensure you specify the server name rather than a network alias.
14011 16 No Unable to mark server '%s' as a non SQL Server subscriber.
14012 16 No The @status parameter value must be either 'active' or 'inactive'.
14013 16 No This database is not enabled for publication.
14014 16 No The synchronization method (@sync_method) must be '[bcp] native', '[bcp] character', 'concurrent', 'concurrent_c', 'database snapshot', or 'database snapshot character'.
14015 16 No The replication frequency (@repl_freq) must be either 'continuous' or 'snapshot'.
14016 16 No The publication '%s' already exists.
14017 16 No Invalid @restricted parameter value. Valid options are 'true' or 'false'.
14018 16 No Could not create the publication.
14019 16 No The @operation parameter value must be either add, drop, or alter.
14020 16 No Could not obtain the column ID for the specified column. Schema replication failed.
14021 16 No The column was not added correctly to the article.
14022 16 No The @property parameter value must be either 'description', 'sync_object', 'type', 'ins_cmd', 'del_cmd', 'upd_cmd', 'filter', 'dest_table', 'dest_object', 'creation_script', 'pre_creation_cmd', 'status', 'schema_option', or 'destination_owner'.
14023 16 No The type must be '[indexed view ]logbased[ (manualview|manualfilter|manualboth)]', '[serializable ]proc exec', or '(view|indexed view|proc|func|aggregate|synonym) schema only'.
14024 16 No The value of property 'subscriber_provider' cannot be NULL.
14025 10 No Article update successful.
14026 16 No The value of property 'subscriber_type is not a supported heterogeneous subscriber type. The value must be 1 (ODBC subscriber), or 3 (OLEDB subscriber).
14027 11 No %s does not exist in the current database.
14028 16 No Only user tables, materialized views, and stored procedures can be published as 'logbased' articles.
14029 16 No The vertical partition switch must be either 'true' or 'false'.
14030 16 No The article '%s' exists in publication '%s'.
14031 16 No User tables and views are the only valid synchronization objects.
14032 16 No The value of parameter %s cannot be 'all'. It is reserved by replication stored procedures.
14033 16 No Could not change replication frequency because there are active subscriptions on the publication.
14034 16 No The publication name (@publication) cannot be the keyword 'all'.
14035 16 No The replication option '%s' of database '%s' has already been set to true.
14036 16 No Could not enable database for publishing.
14037 16 No The replication option '%s' of database '%s' has been set to false.
14038 16 No Could not disable database for publishing.
14039 16 No Could not construct column clause for article view. Reduce the number of columns or create the view manually.
14040 16 No The server '%s' is already a Subscriber.
14041 16 No The '%s' property can only be changed if the publication is enabled for heterogeneous subscriptions. The publication is not enabled.
14042 16 No Could not create Subscriber.
14043 16 No The parameter %s passed to stored procedure %s cannot be NULL.
14044 16 No Unable to clear subscriber status for the server.
14045 16 No Unable to update subscriber_type in MSdistribution_agents table.
14046 16 No Could not drop article. A subscription exists on it.
14047 16 No Could not drop %s.
14048 16 No The server '%s' is not a Subscriber.
14049 16 No Stored procedures for replication are the only objects that can be used as a filter.
14050 11 No No subscription is on this publication or article.
14051 16 No The parameter value must be 'sync_type' or 'dest_db'.
14052 16 No The @sync_type parameter value must be "automatic", "none", "replication support only", "initialize with backup", or "initialize from lsn".
14053 16 No The subscription could not be updated at this time.
14054 10 No The subscription was updated successfully.
14055 10 No The subscription does not exist.
14056 16 No The subscription could not be dropped at this time.
14057 16 No The subscription could not be created.
14058 16 No Cannot create the subscription because the subscription already exists in the subscription database. Only one subscription to the same publication is allowed in each subscription database. Drop the subscription and add it again if necessary. If the problem persists, replication metadata might be incorrect; see Books Online for troubleshooting information.
14059 16 No Materialized view articles cannot be created for publications with the properties allow_sync_tran, allow_queued_tran, or allow_dts.
14060 16 No Subscriber parameters specifying provider properties must be NULL for SQL Server subscribers.
14061 16 No The @pre_creation_cmd parameter value must be 'none', 'drop', 'delete', or 'truncate'.
14062 10 No The Subscriber was dropped.
14063 11 No The remote server does not exist or has not been designated as a valid Subscriber.
14064 10 No Found generation stuck at genstatus 4.
14065 16 No The @status parameter value must be 'initiated', 'active', 'inactive', or 'subscribed'.
14066 16 No The previous status must be 'active', 'inactive', or 'subscribed'.
14067 16 No The status value is the same as the previous status value.
14068 16 No The subscription status of the object could not be changed.
14069 16 No Could not update sysarticles. The subscription status could not be changed.
14070 16 No Could not update the distribution database subscription table. The subscription status could not be changed.
14071 16 No Could not find the Distributor or the distribution database for the local server. The Distributor may not be installed, or the local server may not be configured as a Publisher at the Distributor.
14074 16 No The server '%s' is already listed as a Publisher.
14075 16 No The Publisher could not be created at this time.
14076 16 No Could not grant replication login permission to '%s'.
14077 10 No The publication was updated successfully.
14078 16 No The parameter must be 'description', 'taskid', 'sync_method', 'status', 'repl_freq', 'restricted', 'retention', 'immediate_sync', 'enabled_for_internet', 'allow_push', 'allow_pull', 'allow_anonymous', or 'retention'.
14080 16 No The remote server "%s" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
14085 16 No The Subscriber information could not be obtained from the Distributor.
14088 16 No The table '%s' must have a primary key to be published using the transaction-based method.
14089 16 No The clustered index on materialized view '%s' may not contain nullable columns if it is to be published using the transaction-based method.
14090 16 No Error evaluating article synchronization object after column drop. The filter clause for article '%s' must not reference the dropped column.
14091 16 No The @type parameter passed to sp_helpreplicationdb must be either 'pub' or 'sub'.
14092 16 No Could not change article because there is an existing subscription to the article.
14093 16 No Cannot grant or revoke access directly on publication '%s' because it uses the default publication access list.
14094 16 No Could not subscribe to article '%s' because heterogeneous Subscriber '%s' does not support the @pre_creation_cmd parameter value 'truncate'.
14095 16 No The value for the @sync_method parameter is not valid. Could not subscribe to publication '%s' because non-SQL Server Subscriber '%s' only supports values of 'character', 'bcp character', 'concurrent_c', and 'database snapshot character' for the @sync_method parameter.
14096 16 No The path and name of the table creation script must be specified if the @pre_creation_cmd parameter value is 'drop'.
14097 16 No The 'status' value must be 'no column names', 'include column names', 'string literals', 'parameters', 'DTS horizontal partitions' or 'no DTS horizontal partitions'.
14098 16 No Cannot drop Distribution Publisher '%s'. The remote Publisher is using '%s' as Distributor. Disable publishing at the Publisher before attempting to drop this relationship.
14099 16 No The server '%s' is already defined as a Distributor. To reconfigure the server as a Distributor, you must first uninstall the exisiting Distributor. Use the stored procedure sp_dropdistributor, or use the Disable Publishing and Distribution Wizard.
14100 16 No Specify all articles when subscribing to a publication using concurrent snapshot processing.
14101 16 No The publication '%s' already has a Snapshot Agent defined.
14102 16 No Specify all articles when unsubscribing from a publication using concurrent snapshot processing.
14103 16 No Invalid "%s" value. Valid values are "publisher", "subscriber", or "both".
14105 10 No You have updated the distribution database property '%s' successfully.
14106 16 No Distribution retention periods must be greater than or equal to 0.
14107 10 No The @max_distretention value must be larger than the @min_distretention value.
14108 10 No Removed %ld history records from %s.
14109 10 No The @security_mode parameter value must be 0 (SQL Server Authentication) or 1 (Windows Authentication).
14110 16 No For stored procedure articles, the @property parameter value must be 'description', 'dest_table', 'dest_object', 'creation_script', 'pre_creation_cmd', 'schema_option', or 'destination_owner'.
14111 16 No The @pre_creation_cmd parameter value must be 'none' or 'drop'.
14112 16 No This procedure can be executed only against table-based articles.
14113 16 No Could not execute '%s'. Check '%s' in the install directory.
14114 16 No The server '%s' is not configured as a Distributor.
14115 16 No The property parameter value must be %s.
14117 16 No '%s' is not configured as a distribution database.
14118 16 No A stored procedure can be published only as a 'serializable proc exec' article, a 'proc exec' article, or a 'proc schema only' article.
14119 16 No Could not add the distribution database '%s'. This distribution database already exists.
14120 16 No Could not drop the distribution database '%s'. This distributor database is associated with a Publisher.
14121 16 No Could not drop the Distributor '%s'. This Distributor has associated distribution databases.
14122 16 No The @article parameter value must be 'all' for immediate_sync publications.
14123 16 No The subscription @sync_type parameter value 'manual' is no longer supported.
14124 16 No A publication must have at least one article before a subscription to it can be created.
14126 16 No You do not have the required permissions to complete the operation.
14128 16 No Invalid @subscription_type parameter value. Valid options are 'push' or 'pull'.
14129 16 No The @status parameter value must be NULL for 'automatic' sync_type when you add subscriptions to an immediate_sync publication.
14135 16 No There is no subscription on Publisher '%s', publisher database '%s', publication '%s'.
14136 16 No The keyword 'all' is reserved by replication stored procedures.
14137 16 No The @value parameter value must be either 'true' or 'false'.
14138 16 No Invalid option name '%s'.
14139 16 No The replication system table '%s' already exists.
14143 16 No Cannot drop Distributor Publisher '%s'. There are Subscribers associated with it in the distribution database '%s'.
14144 16 No Cannot drop Subscriber '%s'. There are subscriptions for it in the publication database '%s'.
14146 16 No The article parameter '@schema_option' cannot be NULL.
14147 16 No Restricted publications are no longer supported.
14148 16 No Invalid '%s' value. Valid values are 'true' or 'false'.
14149 10 No Removed %ld replication history records in %s seconds (%ld row/secs).
14150 10 No Replication-%s: agent %s succeeded. %s
14151 18 Yes Replication-%s: agent %s failed. %s
14152 10 Yes Replication-%s: agent %s scheduled for retry. %s
14153 10 No Replication-%s: agent %s warning. %s
14154 16 No The Distributor parameter must be '@heartbeat_interval'.
14155 16 No Invalid article ID specified for procedure script generation.
14156 16 No The custom stored procedure calling the format for the %s command specified in the article definition does not match the %s format.
14157 10 Yes The subscription created by Subscriber '%s' to publication '%s' has expired and has been dropped.
14158 10 No Replication-%s: agent %s: %s.
14159 16 No Could not change property '%s' for article '%s' because there is an existing subscription to the article.
14160 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and change the expiration threshold value if necessary.
14161 10 Yes The threshold [%s:%s] for the publication [%s] has been set. Make sure that the logreader and distribution agents are running and can match the latency requirement.
14162 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14163 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14164 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14165 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14166 10 No Disable publishing ignored error msg %d, severity %d, state %d: %s.
14167 10 No Subscription expiration
14168 10 No Transactional replication latency
14169 10 No Long merge over dialup connection
14170 10 No Long merge over LAN connection
14171 10 No Slow merge over LAN connection
14172 10 No Slow merge over dialup connection
14196 10 No The agent has never been run.
14197 10 No Value of %s parameter should be in the set %s
14198 10 No The value of the %s parameter should be in the range %s. Verify that the specified parameter value is correct.
14199 10 No The specified job '%s' is not created for maintenance plans. Verify that the job has at least one step calling xp_sqlmaint.
14200 16 No The specified '%s' is invalid.
14201 10 No 0 (all steps) ..
14202 10 No before or after @active_start_time
14203 10 No sp_helplogins [excluding Windows NT groups]
14204 10 No 0 (non-idle), 1 (executing), 2 (waiting for thread), 3 (between retries), 4 (idle), 5 (suspended), 7 (performing completion actions)
14205 10 No (unknown)
14206 10 No 0..n seconds
14207 10 No -1 [no maximum], 0..n
14208 10 No 1..7 [1 = E-mail, 2 = Pager, 4 = NetSend]
14209 10 No 0..127 [1 = Sunday .. 64 = Saturday]
14210 10 No notification
14211 10 No server
14212 10 No (all jobs)
14213 10 No Core Job Details:
14214 10 No Job Steps:
14215 10 No Job Schedules:
14216 10 No Job Target Servers:
14217 10 No SQL Server Warning: '%s' has performed a forced defection of TSX server '%s'. Run sp_delete_targetserver at the MSX in order to complete the defection.
14218 10 No hour
14219 10 No minute
14220 10 No second
14221 16 No This job has one or more notifications to operators other than '%s'. The job cannot be targeted at remote servers as currently defined.
14222 16 No Cannot rename the '%s' operator.
14223 16 No Cannot modify or delete operator '%s' while this server is a %s.
14224 10 No Warning: The server name given is not the current MSX server ('%s').
14225 16 No Warning: Could not determine local machine name. This prevents MSX operations from being posted.
14226 10 No %ld history entries purged.
14227 10 No Server defected from MSX '%s'. %ld job(s) deleted.
14228 10 No Server MSX enlistment changed from '%s' to '%s'.
14229 10 No Server enlisted into MSX '%s'.
14230 10 No SP_POST_MSX_OPERATION: %ld %s download instruction(s) posted.
14231 10 No SP_POST_MSX_OPERATION Warning: The specified %s ('%s') is not involved in a multiserver job.
14232 16 No Specify either a job_name, job_id, or an originating_server.
14233 16 No Specify a valid job_id (or 0x00 for all jobs).
14234 16 No The specified '%s' is invalid (valid values are returned by %s).
14235 16 No The specified '%s' is invalid (valid values are greater than 0 but excluding %ld).
14236 10 No Warning: Non-existent step referenced by %s.
14237 16 No When an action of 'REASSIGN' is specified, the New Login parameter must also be supplied.
14238 10 No %ld jobs deleted.
14239 10 No %ld jobs reassigned to %s.
14240 10 No Job applied to %ld new servers.
14241 10 No Job removed from %ld servers.
14242 16 No Only a system administrator can reassign ownership of a job.
14243 10 No Job '%s' started successfully.
14245 16 No Specify either the @name, @id, or @loginname of the task(s) to be deleted.
14250 16 No The specified %s is too long. It must contain no more than %ld characters.
14251 16 No Cannot specify '%s' as the operator to be notified.
14252 16 No Cannot perform this action on a job you do not own.
14253 10 No %ld (of %ld) job(s) stopped successfully.
14254 10 No Job '%s' stopped successfully.
14255 16 No The owner ('%s') of this job is either an invalid login, or is not a valid user of database '%s'.
14256 16 No Cannot start the job "%s" (ID %s) because it does not have any job server or servers defined. Associate the job with a job server by calling sp_add_jobserver.
14257 16 No Cannot stop the job "%s" (ID %s) because it does not have any job server or servers defined. Associate the job with a job server by calling sp_add_jobserver.
14258 16 No Cannot perform this operation while SQLServerAgent is starting. Try again later.
14260 16 No You do not have sufficient permission to run this command. Contact your system administrator.
14261 16 No The specified %s ('%s') already exists.
14262 16 No The specified %s ('%s') does not exist.
14263 16 No Target server '%s' is already a member of group '%s'.
14264 16 No Target server '%s' is not a member of group '%s'.
14265 24 Yes The MSSQLServer service terminated unexpectedly. Check the SQL Server error log and Windows System and Application event logs for possible causes.
14266 16 No The specified '%s' is invalid (valid values are: %s).
14267 16 No Cannot add a job to the '%s' job category.
14268 16 No There are no jobs at this server that originated from server '%s'.
14269 16 No Job '%s' is already targeted at server '%s'.
14270 16 No Job '%s' is not currently targeted at server '%s'.
14271 16 No A target server cannot be named '%s'.
14272 16 No Object-type and object-name must be supplied as a pair.
14273 16 No You must provide either @job_id or @job_name (and, optionally, @schedule_name), or @schedule_id.
14274 16 No Cannot add, update, or delete a job (or its steps or schedules) that originated from an MSX server.
14275 16 No The originating server must be either local server or MSX server.
14276 16 No '%s' is a permanent %s category and cannot be deleted.
14277 16 No The command script does not destroy all the objects that it creates. Revise the command script.
14278 16 No The schedule for this job is invalid (reason: %s).
14279 16 No Supply either @job_name, @job_id or @originating_server.
14280 16 No Supply either a job name (and job aspect), or one or more job filter parameters.
14281 10 No Warning: The @new_owner_login_name parameter is not necessary when specifying a 'DELETE' action.
14282 16 No Supply either a date (created or last modified) and a data comparator, or no date parameters at all.
14283 16 No Supply @target_server_groups or @target_servers, or both.
14284 16 No Cannot specify a job ID for a new job. An ID will be assigned by the procedure.
14285 16 No Cannot add a local job to a multiserver job category.
14286 16 No Cannot add a multiserver job to a local job category.
14287 16 No The '%s' supplied has an invalid %s.
14288 16 No %s cannot be before %s.
14289 16 No %s cannot contain '%s' characters.
14290 16 No This job is currently targeted at the local server so cannot also be targeted at a remote server.
14291 16 No This job is currently targeted at a remote server so cannot also be targeted at the local server.
14292 16 No There are two or more tasks named '%s'. Specify %s instead of %s to uniquely identify the task.
14293 16 No There are two or more jobs named '%s'. Specify %s instead of %s to uniquely identify the job.
14294 16 No Supply either %s or %s to identify the job.
14295 16 No Frequency Type 0x2 (OnDemand) is no longer supported.
14296 16 No This server is already enlisted into MSX '%s'.
14297 16 No Cannot enlist into the local machine.
14298 16 No This server is not currently enlisted into an MSX.
14299 16 No Server '%s' is an MSX. Cannot enlist one MSX into another MSX.
14301 16 No Logins other than the current user can only be seen by members of the sysadmin role.
14305 16 No Column '%.*ls' does not exist in table '%.*ls'.
14306 16 No The target server (TSX) version is not compatible with the master server (MSX) version (%ld.%ld.%ld).
14307 16 No Access to Integration Services package '%s' is denied.
14350 16 No Cannot initialize COM library because CoInitialize failed.
14351 16 No Cannot complete this operation because an unexpected error occurred.
14353 16 No Cannot determine the service account for this SQL Server instance.
14357 16 No Cannot list '%s' in Active Directory because the name is too long. Active Directory common names cannot exceed 64 characters.
14360 16 No %s is already configured as TSX machine
14362 16 No The MSX server must be running the Standard or Enterprise edition of SQL Server
14363 16 No The MSX server is not prepared for enlistments [there must be an operator named 'MSXOperator' defined at the MSX]
14364 16 No The TSX server is not currently enlisted
14365 16 No Specify a valid schedule_uid.
14366 16 No Only members of sysadmin role can modify the owner of a schedule.
14367 16 No One or more schedules were not deleted because they are being used by at least one other job. Use "sp_detach_schedule" to remove schedules from a job.
14368 16 No Schedule "%s" was not deleted because it is being used by at least one other job. Use "sp_detach_schedule" to remove schedules from a job.
14369 16 No The schedule ID "%s" is used by more than one job. Specify the job_id.
14370 16 No The @originating_server must be either the local server name or the master server (MSX) name for MSX jobs on a target server (TSX).
14371 16 No There are two or more schedules named "%s". Specify %s instead of %s to uniquely identify the schedule.
14372 16 No The schedule was not deleted because it is being used by one or more jobs.
14373 16 No Supply either %s or %s to identify the schedule.
14374 16 No The specified schedule name "%s" is not associated with the job "%s".
14375 16 No More than one schedule named "%s" is attached to job "%s". Use "sp_update_schedule" to update schedules.
14376 16 No More than one schedule named "%s" is attached to job "%s". Use "sp_detach_schedule" to remove schedules from a job.
14377 16 No The schedule was not attached to the specified job. The caller must own the job or the operation must be performed by a sysadmin.
14378 16 No @sysadmin_only flag is no longer supported by SQLAgent and kept here only for backwards compatibility
14379 16 No Table '%s' foreign key 'originating_server_id' does not have a matching value in the referenced view 'dbo.sysoriginatingservers_view'.
14380 16 No Field 'originating_server_id' in table sysoriginatingservers is being referenced by either sysjobs or sysschedules.
14390 16 No Only members of role sysadmin can specify the %s parameter.
14391 16 No Only owner of a job or members of sysadmin role can detach a schedule.
14392 16 No Only owner of a job or members of role sysadmin or SQLAgentOperatorRole can purge history of the job.
14393 16 No Only owner of a job or members of role sysadmin or SQLAgentOperatorRole can start and stop the job.
14394 16 No Only owner of a job schedule or members of sysadmin role can modify or delete the job schedule.
14395 16 No '%s' is a member of sysadmin server role and cannot be granted to or revoked from the proxy. Members of sysadmin server role are allowed to use any proxy.
14396 16 No Only members of sysadmin server role can modify multi-server jobs
14397 16 No Only members of sysadmin server role can start/stop multi-server jobs
14398 16 No Only members of sysadmin server role can create multi-server jobs
14399 16 No Current proxy_id %d and new proxy_id %d cannot be the same.
14400 16 No Proxy %d does not have access to subsystem %d. Please use sp_grant_proxy_to_subsystem to grant permissions to this proxy.
14410 16 No You must supply either a plan_name or a plan_id.
14411 16 No Cannot delete this plan. The plan contains enlisted databases.
14412 16 No The destination database is already part of a log shipping plan.
14413 16 No This database is already log shipping.
14414 16 No A log shipping monitor is already defined.
14415 16 No The user name cannot be null when using SQL Server authentication.
14416 16 No This stored procedure must be run in msdb.
14417 16 No Cannot delete the monitor server while databases are participating in log shipping.
14418 16 No The specified @backup_file_name was not created from database '%s'.
14419 16 No The specified @backup_file_name is not a database backup.
14420 16 Yes The log shipping primary database %s.%s has backup threshold of %d minutes and has not performed a backup log operation for %d minutes. Check agent log and logshipping monitor information.
14421 16 Yes The log shipping secondary database %s.%s has restore threshold of %d minutes and is out of sync. No restore was performed for %d minutes. Restored latency is %d minutes. Check agent log and logshipping monitor information.
14422 16 No Supply either @plan_id or @plan_name.
14423 16 No Other databases are enlisted on this plan and must be removed before the plan can be deleted.
14424 16 No The database '%s' is already involved in log shipping.
14425 16 No The database '%s' does not seem to be involved in log shipping.
14426 16 No A log shipping monitor is already defined. Call sp_define_log_shipping_monitor with @delete_existing = 1.
14427 16 No A user name is necessary for SQL Server security.
14428 16 No Could not remove the monitor as there are still databases involved in log shipping.
14429 16 No There are still secondary servers attached to this primary.
14430 16 No Destination path %s is not valid. Unable to list directory contents. Specify a valid destination path.
14440 16 No Could not set single user mode.
14441 16 No Role change succeeded.
14442 16 No Role change failed.
14450 16 No The specified @backup_file_name was not taken from database '%s'.
14451 16 No The specified @backup_file_name is not a database backup.
14500 16 No Supply either a non-zero message ID, non-zero severity, non-null performance condition, or non-null WMI namespace and query.
14501 16 No An alert ('%s') has already been defined on this condition.
14502 16 No The @target_name parameter must be supplied when specifying an @enum_type of 'TARGET'.
14503 16 No The @target_name parameter should not be supplied when specifying an @enum_type of 'ALL' or 'ACTUAL'.
14504 16 No '%s' is the fail-safe operator. You must make another operator the fail-safe operator before '%s' can be dropped.
14505 16 No Specify a null %s when supplying a performance condition.
14506 16 No Cannot set alerts on message ID %ld.
14507 16 No A performance condition must be formatted as: 'object_name|counter_name|instance_name|comparator(> or < or =)|numeric value'.
14508 16 No Specify both @wmi_namespace and @wmi_query.
14509 16 No Specify a valid %s when supplying a @wmi_namespace.
14510 16 No Specify a null %s when supplying a @wmi_namespace.
14511 16 No The @wmi_query could not be executed in the @wmi_namespace provided. Verify that an event class selected in the query exists in the namespace and that the query has the correct syntax.
14512 16 No Specify a valid %s when supplying a @wmi_query.
14513 10 No Analysis query subsystem
14514 10 No Analysis command subsystem
14515 16 No Only a member of the sysadmin server role can add a job for a different owner with @owner_login_name.
14516 16 No Proxy (%d) is not allowed for subsystem "%s" and user "%s". Grant permission by calling sp_grant_proxy_to_subsystem or sp_grant_login_to_proxy.
14517 16 No A proxy account is not allowed for a Transact-SQL subsystem.
14518 16 No Cannot delete proxy (%d). It is used by at least one jobstep. Change this proxy for all jobsteps by calling sp_reassign_proxy.
14519 16 No Only one of @login_name, @fixed_server_role, or @msdb_role should be specified.
14520 16 No "%s" is not a valid SQL Server standard login, Windows NT user, Windows NT group, or msdb database role.
14521 16 No "%s" is not a valid SQL Server fixed server role, Windows NT user, or Windows NT group.
14522 16 No '"%s" is not a valid role of an msdb database, Windows NT user, or Windows NT group.
14523 16 No "%s" has not been granted permission to use proxy "%s".
14524 16 No Supply either %s or %s.
14525 16 No Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
14526 16 No The specified category "%s" does not exist for category class "%s".
14527 16 No Job "%s" cannot be used by an alert. It should first be associated with a server by calling sp_add_jobserver.
14528 16 No Job "%s" has no steps defined.
14529 16 No Proxy "%s" is not a valid Windows user.
14530 16 No The Transact-SQL subsystem cannot be executed under the context of a proxy account.
14531 16 No Permission to access proxy already granted. Verify current permissions assignments.
14532 16 No Supply both %s and %s, or none of them.
14533 16 No Use either a proxy or user_domain, user_name, or user_password parameter.
14534 16 No All user_domain, user_name, and user_password parameters should be defined.
14535 16 No The user_domain, user_name, and user_password parameters can be specified only for replication subsystems.
14536 16 No Only members of the sysadmin role can specify a "%s" parameter.
14537 16 No Execution in the context of disabled proxy (proxy_id = %d) is not allowed. Contact your system administrator.
14538 10 No SSIS package execution subsystem
14539 16 No Only a Standard or Enterprise edition of SQL Server can be enlisted into an MSX.
14540 16 No Only a SQL Server running on Microsoft Windows NT can be enlisted into an MSX.
14541 16 No The version of the MSX (%s) is not recent enough to support this TSX. Version %s or later is required at the MSX.
14542 16 No It is invalid for any TSQL step of a multiserver job to have a non-null %s value.
14543 16 No Login '%s' owns one or more multiserver jobs. Ownership of these jobs can only be assigned to members of the %s role.
14544 16 No This job is owned by '%s'. Only a job owned by a member of the %s role can be a multiserver job.
14545 16 No The %s parameter is not valid for a job step of type '%s'.
14546 16 No The %s parameter is not supported on Windows 95/98 platforms.
14547 10 No Warning: This change will not be downloaded by the target server(s) until an %s for the job is posted using %s.
14548 10 No Target server '%s' does not have any jobs assigned to it.
14549 10 No (Description not requested.)
14550 10 No Command-Line Subsystem
14551 10 No Replication Snapshot Subsystem
14552 10 No Replication Transaction-Log Reader Subsystem
14553 10 No Replication Distribution Subsystem
14554 10 No Replication Merge Subsystem
14555 10 No Active Scripting Subsystem
14556 10 No Transact-SQL Subsystem
14557 10 No [Internal]
14558 10 No (encrypted command)
14559 10 No (append output file)
14560 10 No (include results in history)
14561 10 No (normal)
14562 10 No (quit with success)
14563 10 No (quit with failure)
14564 10 No (goto next step)
14565 10 No (goto step)
14566 10 No (idle)
14567 10 No (below normal)
14568 10 No (above normal)
14569 10 No (time critical)
14570 10 No (Job outcome)
14571 10 No No description available.
14572 10 No @freq_interval must be at least 1 for a daily job.
14573 10 No @freq_interval must be a valid day of the week bitmask [Sunday = 1 .. Saturday = 64] for a weekly job.
14574 10 No @freq_interval must be between 1 and 31 for a monthly job.
14575 10 No @freq_relative_interval must be one of 1st (0x1), 2nd (0x2), 3rd [0x4], 4th (0x8) or Last (0x10).
14576 10 No @freq_interval must be between 1 and 10 (1 = Sunday .. 7 = Saturday, 8 = Day, 9 = Weekday, 10 = Weekend-day) for a monthly-relative job.
14577 10 No @freq_recurrence_factor must be at least 1.
14578 10 No Starts whenever the CPU usage has remained below %ld percent for %ld seconds.
14579 10 No Automatically starts when SQLServerAgent starts.
14580 10 No job
14581 10 No Replication Transaction Queue Reader Subsystem
14582 16 No Only a sysadmin can specify '@output_file_name' parameter for a jobstep.
14583 16 No Only a sysadmin can specify '@database_user_name' parameter.
14585 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may reassign its ownership.
14586 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may create new versions of it.
14587 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may drop it or any of its versions.
14588 10 No ID.VersionID =
14589 10 No [not specified]
14590 16 No DTS Package '%s' already exists with a different ID in this category.
14591 16 No SSIS folder '%s' already exists in the specified parent folder.
14592 16 No DTS Category '%s' was found in multiple parent categories. You must uniquely specify the category to be dropped.
14593 16 No SSIS folder '%s' contains packages and/or other folders. You must drop these first.
14594 10 No DTS Package
14595 16 No DTS Package '%s' exists in different categories. You must uniquely specify the package.
14596 16 No DTS Package '%s' exists in another category.
14597 16 No DTS Package ID '%s' already exists with a different name.
14598 16 No Cannot drop the Local, Repository, or LocalDefault DTS categories.
14599 10 No Name
14600 16 No Proxy "%s" has not been granted permission to use subsystem "%s".
14601 16 No Operator "%s" is not enabled and therefore cannot receive notifications.
14602 16 No Operator "%s" does not have an e-mail address specified.
14603 16 No Database Mail is not properly configured.
14604 16 No Both %s parameters (id and name) cannot be NULL
14605 16 No Both %s parameters (id and name) do not point to the same object
14606 16 No %s id is not valid
14607 16 No %s name is not valid
14608 16 No Either %s or %s parameter needs to be supplied
14609 16 No Mail database to user database association does not exist and therefore cannot be updated
14610 16 No Either @profile_name or @description parameter needs to be specified for update
14611 16 No Account sequence number must be supplied for update
14612 16 No Each principal should have at least one default profile
14613 16 No The specified '%s' cannot use commas (,) to separate addresses: '%s'. To continue, use semicolons (;) to separate addresses.
14614 16 No %s is not a valid mailserver_type
14615 16 No The @username parameter needs to be supplied if the @password is supplied.
14616 16 No Unable to retrieve the newly created credential [%s] from the credential store.
14617 16 No Mail host database specified is invalid
14618 16 No Parameter '%s' must be specified. This parameter cannot be NULL.
14619 16 No Received an error on the Service Broker conversation with Database Mail. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for information.
14620 16 No The Service Broker conversation to Database Mail ended without a response from Database Mail. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for more information.
14621 16 No Parameter @attachmentencoding does not support the value "%s". The attachment encoding must be "MIME".
14622 16 No Parameter @importance does not support the value "%s". Mail importance must be one of LOW, NORMAL, or HIGH.
14623 16 No Parameter @sensitivity does not support the value "%s". Mail sensitivity must be one of NORMAL, PERSONAL, PRIVATE, or CONFIDENTIAL.
14624 16 No At least one of the following parameters must be specified. "%s".
14625 16 No Parameter @attach_query_result_as_file cannot be 1 (true) when no value is specified for parameter @query. A query must be specified to attach the results of the query.
14626 16 No Parameter @mailformat does not support the value "%s". The mail format must be TEXT or HTML.
14627 16 No Received error %d while sending a message as part of the %s operation. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for more information.
14628 16 No The format of the parameter @attachments is incorrect. The file names must be separated by a semicolon ";".
14629 16 No There is no configuration parameter named "%s", or the value provided is not of the correct data type.
14630 16 No Database Mail is not permitted to send files with the file extension %s.
14631 16 No The current user ('%s') either does not have permission to access the database specified in the parameter @execute_query_database or cannot impersonate the user specified in the parameter @execute_query_as. Only members of the sysadmin fixed server role and members of the db_owner fixed database role can impersonate another user.
14632 16 No The user name %s specified in @execute_query_as is invalid. There is no user by that name.
14633 16 No The database name "%s" specified in @execute_query_database is invalid. There is no database by that name.
14634 10 No Warning: %s'
14635 10 No Mail (Id: %d) queued.
14636 16 No No global profile is configured. Specify a profile name in the @profile_name parameter.
14637 10 No Activation failure.
14638 10 No Activation successful.
14639 10 No The mail queue was started by login "%s".
14640 10 No The mail queue stopped by login "%s".
14641 16 No Mail not queued. Database Mail is stopped. Use sysmail_start_sp to start Database Mail.
14642 10 No Default attachment encoding
14643 10 No Default dialog lifetime
14644 10 No Default maximum file size
14645 10 No Extensions not allowed in outgoing mails
14646 10 No Number of retry attempts for a mail server
14647 10 No Delay between each retry attempt to mail server
14648 10 No Minimum process lifetime in seconds
14649 16 No Unable to test profile. Database Mail is stopped. Use sysmail_start_sp to start Database Mail.
14650 16 No Service Broker message delivery is not enabled in this database. Use the ALTER DATABASE statement to enable Service Broker message delivery.
14651 16 No Unable to test profile. Service Broker message delivery is not enabled in this database. Use the ALTER DATABASE statement to enable Service Broker message delivery.
14652 16 No Invalid message received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14653 16 No Invalid %s value received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14654 10 No Unexpected message received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14655 16 No Invalid XML message format received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14657 16 No Mail not queued. Maximum number of mails per day (%ld) for login %s has been exceeded.
14658 16 No Failed to retrieve SQLPath for syssubsystems population.
14659 16 No Failed to retrieve VerSpecificRootDir for syssubsystems population.
14660 16 No Database Compatibility Level is too low. Compatibility Level must be Version80 or higher.
14661 16 No Query execution failed: %s
14662 10 No mailitem_id on conversation %s was not found in the sysmail_send_retries table. This mail item will not be sent.
14663 10 No Mail Id %d has exceeded the retry count. This mail item will not be sent.
14664 16 No Database Mail logging level: normal - 1, extended - 2 (default), verbose - 3
14665 10 No Mail items deletion is initiated by user "%s". %d items deleted.
14666 16 No User name cannot be supplied when using default credentials
14667 16 No Mail Id %d has been deleted from sysmail_mailitems table. This mail will not be sent.
14668 16 No Deleting profile %s failed because there are some unsent emails associated with this profile, use force_delete option to force the deletion of the profile.
14670 16 No Cannot delete the active collection set '%s'. Stop the collection set and then try to delete it again.
14671 16 No Cannot update the name or the parameters of the collection item '%s' in the active collection set '%s'. Stop the collection set and then try to update the collection item again.
14672 16 No Cannot delete the collection item '%s' in the active collection set '%s'. Stop the collection set and then try to delete the collection item again.
14673 16 No Cannot delete the collector type '%s'. Delete all collection items associated with this collector type and then try to delete it again.
14674 16 No Cannot upload data for the inactive collection set '%s'. Start the collection set and then try to upload the data again.
14675 16 No Cannot update the name, target, proxy_id, logging_level, or collection_mode, or add collection item to the active collection set '%s'. Stop the collection set and then try to update it again.
14676 16 No The user does not have permission to change '%s'. The user must be a member of data collector role '%s'.
14677 16 No The user does not have permission to perform this operation. The user must be a member of data collector role '%s'.
14678 16 No SQL Server Trace with id %d has been stopped and closed by external user. SQL Server Trace collector will attempt to re-create the trace.
14679 16 No The specified %s (%s) is not valid in this data warehouse.
14680 16 No Management Data Warehouse database can only be installed on an instance of SQL Server 2008 or higher.
14681 16 No Cannot perform this procedure when the collector is disabled. Enable the collector and then try again.
14682 16 No The state of the collection set has changed, but it will not start or stop until the collector is enabled.
14683 16 No A collection set in cached mode requires a schedule.
14684 16 No Caught error#: %d, Level: %d, State: %d, in Procedure: %s, Line: %d, with Message: %s
14685 16 No Collection set: '%s' does not contain any collection items, so starting the collection set will have no effect.
14686 16 No The MDWInstance and MDWDatabase parameters of the configuration store cannot be null.
14687 16 No Invalid value (%d) of the @cache_window parameter. Allowable values are: -1 (cache all upload data from previous upload failures), 0 (cache no upload data), N (cache data from N previous upload failures, where N >= 1)
14688 16 No A collection set cannot start when SQL Server Agent is stopped. Start SQL Server Agent.
14689 16 No A collection set cannot start if the management data warehouse is not configured. Run the instmdw.sql script to create and configure the management data warehouse.
14690 16 No Cannot perform this procedure when the collector is enabled. Disable the collector and then try again.
14691 16 No The status of the collector cannot be null. This may indicate an internal corruption in the collector configuration data.
14692 16 No Insufficient priveleges to start collection set: '%s'. Only a member of the 'sysadmin' fixed server role can start a collection set without a SQL Server Agent proxy. Attach a SQL Server Agent proxy to the collection set before retrying.
14693 16 No A collection set cannot start without a schedule. Specify a schedule for the collection set.
14694 16 No Cannot upload data on-demand for the collection set '%s' in non-cached mode.
14695 16 No Cannot collect data on-demand for the collection set '%s' in cached mode.
14696 16 No Cannot update or delete a system collection set, or add new collection items to it.
14697 16 No Unable to convert showplan to XML. Error #%d on Line %d: %s
14698 10 No PowerShell Subsystem
14699 16 No Data Collector cannot be enabled when SQL Server Agent is stopped. Start SQL Server Agent.
14700 10 No Collects data about the disk and log usage for all databases.
14701 10 No Disk Usage
14702 10 No Disk Usage - Data Files
14703 10 No Disk Usage - Log Files
14704 10 No Collects top-level performance indicators for the computer and the Database Engine. Enables analysis of resource use, resource bottlenecks, and Database Engine activity.
14705 10 No Server Activity
14706 10 No Server Activity - DMV Snapshots
14707 10 No Server Activity - Performance Counters
14708 10 No Collects query statistics, T-SQL text, and query plans of most of the statements that affect performance. Enables analysis of poor performing queries in relation to overall SQL Server Database Engine activity.
14709 10 No Query Statistics
14710 10 No Query Statistics - Query Activity
14711 10 No Changes to SQL dumper configuration will take effect when the collection set is restarted. To perform an immediate dump, use the dtutil /dump option.
14712 16 No Only dbo or members of dc_admin can install or upgrade instmdw.sql. Contact an administrator with sufficient permissions to perform this operation.
14713 21 No A management data warehouse cannot be installed to SQL Server Express Edition.
14714 16 No Attempting to upgrade a Management Data Warehouse of newer version '%s' with an older version '%s'. Upgrade aborted.
14715 10 No Collects data about instances of SQL Server that are managed in the SQL Server Utility.
14716 10 No Utility Information
14718 10 No Utility Information - Managed Instance
14719 16 No "%s" has not been granted permission to use proxy.
14720 16 No The operation failed because credential '%s' identity is not a valid Windows account
14721 10 No AutoAdmin Subsystem
14801 16 No Multiple REMOTE_DATA_ARCHIVE definition.
14802 16 No Cannot disable REMOTE_DATA_ARCHIVE because the database contains at least one table having REMOTE_DATA_ARCHIVE enabled.
14803 16 No Cannot alter REMOTE_DATA_ARCHIVE option for table '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled for the database.
14804 16 No A database credential with the name '%s' was not found. A database credential must be created before stretching a database with it.
14806 16 No The identity specified for the database credential '%s' is invalid. The identity must be a valid username for the remote stretch server administrator.
14807 16 No The secret specified for the database credential '%s' is invalid. The secret must be a valid password for the remote stretch server administrator.
14808 16 No Cannot disable REMOTE_DATA_ARCHIVE when migration is enabled.
14809 16 No Cannot enable REMOTE_DATA_ARCHIVE on database '%s'. The REMOTE_DATA_ARCHIVE option can only be set on user databases.
14810 16 No The database option REMOTE_DATA_ARCHIVE is already enabled on database '%s'.
14811 16 No Remote server '%s' is not an Azure SQL Database V12 (or higher) server. A database can only be stretched to an Azure SQL Database V12 (or higher) server.
14812 16 No Cannot enable REMOTE_DATA_ARCHIVE for table '%.*ls' due to '%ls'. %ls
14813 16 No Cannot enable REMOTE_DATA_ARCHIVE for table '%.*ls' due to column '%.*ls' '%ls'. %ls
14814 16 No Code generation for REMOTE_DATA_ARCHIVE failed (%ls).
14815 16 No File error during REMOTE_DATA_ARCHIVE operation. GetLastError = %d (%ls).
14816 16 No The code generation directory cannot be created or set up correctly.
14817 16 No The server '%s' is not accessible. Ensure that the remote server exists and the Azure SQL DB Firewall Rules permit access to the server. If you believe that your server should be accessible please retry the command.
14818 10 No The %ls on table '%ls' will not be enforced because of the use of REMOTE_DATA_ARCHIVE.
14819 20 No Stretch operation failed due to an internal error.
14820 20 No The stretch code generator output is corrupted. Stretch code generation and remote table provisioning will be re-tried.
14821 16 No Cannot execute in REMOTE_ONLY mode since remote part does not exist or is invalid for this operation.
14822 16 No '%s' is not a valid option for the @mode parameter. Enter 'ALL', 'LOCAL_ONLY' or 'REMOTE_ONLY'.
14823 16 No %ls failed on table '%.*ls' because it is not supported on tables with REMOTE_DATA_ARCHIVE option enabled.
14824 16 No Access to REMOTE_DATA_ARCHIVE has been disabled through server configuration option 'remote data archive'. Use "exec sp_configure 'remote data archive', 1" to enable access to the server.
14825 16 No Cannot perform '%ls' on table '%.*ls' because REMOTE_DATA_ARCHIVE is enabled. %ls
14826 14 No Update and delete of rows eligible for migration in table '%.*ls' is not allowed because of the use of REMOTE_DATA_ARCHIVE.
14827 16 No Unable to access remote data archive: Error: %d, Severity: %d, State: %d, Line: %d '%s'
14828 16 No Cannot perform 'CREATE INDEX' on view '%.*ls' because it references table '%.*ls' with REMOTE_DATA_ARCHIVE enabled.
14829 16 No Table '%.*ls' cannot be used in READTEXT, WRITETEXT and UPDATETEXT statements because it has REMOTE_DATA_ARCHIVE option enabled.
14830 16 No Cannot query table '%.*ls' because this operation is currently disabled for this object.
14831 16 No Cannot set the Remote Data Archive query mode for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14832 10 No Querying tables having REMOTE_DATA_ARCHIVE option enabled will not be possible in LOCAL_AND_REMOTE query mode in database '%.*ls' before Remote Data Archive re-authorization is performed.
14833 16 No Cannot set the Remote Data Archive query mode LOCAL_AND_REMOTE for database '%.*ls' because data on remote side is not consistent. See the SQL Server errorlog for more information on the inconsistent objects.
14834 16 No Cannot de-authorize database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14835 16 No Cannot de-authorize database '%.*ls' because it is already disconnected from the remote database.
14836 16 No Cannot reconcile stretched indexes for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14837 16 No Cannot reconcile indexes for stretched table '%.*ls' because migration is not outbound on the table.
14838 16 No Table '%.*ls' cannot be accessed in SNAPSHOT transaction isolation level because it has REMOTE_DATA_ARCHIVE option enabled.
14839 16 No Only column identifiers are allowed as parameters passed to function '%.*ls'.
14840 16 No The filter predicate cannot be set for table '%.*ls' because all rows are already eligible for migration.
14841 16 No The filter predicate '%.*ls' for table '%.*ls' cannot be replaced with '%.*ls' because conditions necessary to perform the replacement are not satisfied.
14842 10 No The database '%.*ls' contains REMOTE_DATA_ARCHIVE tables, it will be marked as disconnected from the remote during the restore. If you would like to reconnect to the same archive or make a copy, refer to the sp_rda_reauthorize_db spec proc once the restore is complete.
14843 10 No Copying remote database '%.*ls' to remote database '%.*ls'.
14844 10 No Remote database '%.*ls' has completed copying, and is now online.
14845 10 No Waiting for remote database copy to complete.
14846 16 No Cannot re-authorize database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14847 16 No Cannot re-authorize database '%.*ls' because it is already authorized and connected to a remote database.
14848 16 No Attempted Migration failed. Remote insert failed. Error : %d.
14849 16 No Attempted Migration failed. Remote insert failed to insert all the rows. Expected rows : %d, Actual remote rows inserted: %d.
14850 16 No Attempted Migration failed. Incrementation of the batch ID failed. Expected batch ID : %I64d, Current batch ID : %I64d.
14851 16 No Attempted Reconciliation failed. The new max remote batch IDs is not less than the initial. Initial: %I64d, New: %I64d
14852 16 No Cannot query table '%.*ls' because data reconciliation is in progress. This is part of the automatic recovery process for a remote data archive enabled table. You may check the status of this operation in sys.remote_data_archive_tables.
14853 16 No Function '%.*ls' cannot be used as Stretch filter predicate because it does not meet necessary requirements.
14854 10 No The Remote Data Archive connection to the server '%ls' succeeded.
14855 16 No The Remote Data Archive connection to the server '%ls' failed.
14856 16 No The procedure %ls requires the %ls parameter if the database is not enabled for REMOTE_DATA_ARCHIVE.
14857 16 No The procedure %ls does not accept the %ls parameter if the database is enabled for REMOTE_DATA_ARCHIVE.
14858 16 No Cannot queue more stretch tasks. Please wait for remaining tasks to be finished and try again later.
14859 10 No The database '%.*ls' contains REMOTE_DATA_ARCHIVE tables, it will be marked as disconnected from the remote during the restore. If you would like to reconnect to the same archive or make a copy, refer to the sp_rda_reauthorize_db spec proc once the restore is complete.
14860 16 No '%.*ls' expects parameter '%.*ls', which was not supplied.
14861 16 No Modifying the collation is not allowed when REMOTE_DATA_ARCHIVE is already enabled on database '%.*ls'.
14862 16 No Cannot rename index '%ls'. Indexes on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
14863 16 No Stretch was disabled after migration started. Please enable stretch and retry.
14864 16 No Attempted inbound migration failed. Local insert failed. Error : %d.
14865 16 No Attempted inbound migration failed. Decrementation of the batch ID failed. Expected batch ID : %I64d, Current batch ID : %I64d.
14866 16 No Attempted unlinking of the stretched table failed. If this table isn't dropped, please retry the operation of setting REMOTE_DATA_ARCHIVE to OFF on the table.
14867 16 No User does not have permission to enable REMOTE_DATA_ARCHIVE with FEDERATED_SERVICE_ACCOUNT = ON.
14868 16 No Inbound migration is in progress or paused. Migration direction outbound cannot be set at this time. Please retry after inbound migration is complete.
14869 16 No Must be DB OWNER to use the REMOTA_DATA_ARCHIVE_OVERRIDE hint.
14870 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside a user transaction.
14871 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside an implicit transaction.
14872 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted on INSERT statements.
14873 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted within a view definition.
14874 16 No Table '%.*ls' cannot be a target of an update or delete statement with a FROM clause because it has the REMOTE_DATA_ARCHIVE option enabled.
14875 16 No DML operation failed because it would have affected one or more migrated (or migration-eligible) rows.
14876 16 No Table '%.*ls' cannot be the target of an update or delete statement through a view because it has the REMOTE_DATA_ARCHIVE option enabled.
14877 16 No Not all rows needed to reconcile with the remote data are available locally for table '%ls'. Needed batch ID : %I64d, Available batch ID : %I64d.
14878 16 No The filter predicate cannot be set for table '%ls' together with inbound migration.
14879 16 No Cannot perform update or delete using hint %.*ls over table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
14880 16 No Unexpected exception occurred during remote column update.
14881 16 No Unable to update remote data archive: Error: %d, Severity: %d, State: %d.
14882 16 No Cannot use STAGE_ONLY hint since the staging environment for the table '%.*ls' has not been provisioned yet.
14883 16 No Stretch remote table creation failed without specific exception.
14884 16 No Unable to load the stretch filter predicate for table "%.*ls".
14885 16 No Cannot reconcile columns for %S_MSG '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the %S_MSG.
14886 16 No Cannot set the rpo duration for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14887 16 No Cannot run the procedure %.*ls for table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
14888 16 No Attempted inbound migration failed. Insert failed to insert all the rows. Expected rows : %d, Actual remote rows: %d.
14889 16 No Unable to process DML statement due to an unexpected operator in the migration predicate for table "%.*ls".
14890 16 No The maximum batch ID in the staging table cannot be greater than %I64d. Please perform the necessary delete/update operation using STAGE_ONLY hint to correct it.
14891 16 No Table '%.*ls' cannot be a target of an update or delete statement with an OUTPUT clause because it has the REMOTE_DATA_ARCHIVE option enabled.
14892 16 No Table '%.*ls' cannot be a target of an update or delete statement through a CURSOR because it has the REMOTE_DATA_ARCHIVE option enabled.
14893 16 No Table '%.*ls' cannot be a target of an update or delete statement because it has the REMOTE_DATA_ARCHIVE option enabled without a migration predicate.
14894 16 No Table '%.*ls' cannot be a target of an update or delete statement because it has both the REMOTE_DATA_ARCHIVE option enabled and a BLOCK PREDICATE enabled.
14895 16 No Cannot run the procedure %.*ls for table '%.*ls' since the max batch ID found in the stage table is different than the max batch ID found in the remote table. Please make sure that you run the same hinted admin query on both tables to bring them in sync.
14896 10 No Reconciliation proc %.*ls brought down the local batch ID for the stretch table '%.*ls' of database '%.*ls' from %I64d to %I64d.
14897 16 No Cannot run the procedure %.*ls for table '%.*ls' since it is not stretched.
14898 16 No Cannot run the procedure %.*ls in database '%.*ls' since it is not connected to a remote database.
14899 16 No Specified RPO Duration cannot be less than the minimum duration of %d
14901 10 No Running an admin %ls operation on stretched table with ID %d using %ls hint.
14903 16 No Cannot rename column '%ls'. Columns on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
14904 10 No Reauthorizing stretched database '%.*ls' with the remote database has completed successfully. Now reconciling remote tables and/or remote columns...
14905 10 No Reconciliation of remote tables and/or remote columns for stretched database '%.*ls' has completed successfully.
14906 16 No The database '%s' is not accessible. Ensure that the remote database exists. If you believe that your database should be accessible please retry the command.
14908 16 No Cannot set REMOTE_DATA_ARCHIVE to OFF from ON. To retrieve remote data and turn off remote data archive, set REMOTE_DATA_ARCHIVE (MIGRATION_STATE = INBOUND). To turn off REMOTE_DATA_ARCHIVE without retrieving remote data, set REMOTE_DATA_ARCHIVE = OFF_WITHOUT_DATA_RECOVERY.
14909 16 No Cannot currently use the REMOTE_DATA_ARCHIVE_OVERRIDE hint with table '%.*ls' because the remote table has not yet been created.
14910 16 No Cannot currently perform the requested operation against table '%.*ls' because it has the REMOTE_DATA_ARCHIVE option enabled but the remote table has not yet been created.
14911 10 No %.*ls is set to '%.*ls' on table '%.*ls'.
14912 10 No REMOTE_DATA_ARCHIVE with value set to OFF_WITHOUT_DATA_RECOVERY is not supported at table creation. Please retry using a valid option'.
14913 10 No Failure was injected by '%ls' transaction/function.
14914 16 No The edition for database '%ls' is invalid. Only the Azure SQL Stretch edition is supported as a target for Stretch database.
14915 16 No The use of replication is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
14916 16 No Change Data Capture is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
14917 16 No The REMOTE_DATA_ARCHIVE option cannot be enabled on table '%ls' because it will exceed the maximum allowable size of %d bytes on the remote table due to an additional required system column.
Error Severity Event logged Description
14002 16 No Could not find the 'Sync' subsystem with the task ID %ld.
14003 16 No You must supply a publication name.
14004 16 No %s must be in the current database.
14005 16 No Cannot drop the publication because at least one subscription exists for this publication. Drop all subscriptions to the publication before attempting to drop the publication. If the problem persists, replication metadata might be incorrect; consult Books Online for troubleshooting information.
14006 16 No Could not drop the publication.
14008 11 No There are no publications.
14009 11 No There are no articles for publication '%s'.
14010 16 No The remote server '%s' is not defined as a subscription server. Ensure you specify the server name rather than a network alias.
14011 16 No Unable to mark server '%s' as a non SQL Server subscriber.
14012 16 No The @status parameter value must be either 'active' or 'inactive'.
14013 16 No This database is not enabled for publication.
14014 16 No The synchronization method (@sync_method) must be '[bcp] native', '[bcp] character', 'concurrent', 'concurrent_c', 'database snapshot', or 'database snapshot character'.
14015 16 No The replication frequency (@repl_freq) must be either 'continuous' or 'snapshot'.
14016 16 No The publication '%s' already exists.
14017 16 No Invalid @restricted parameter value. Valid options are 'true' or 'false'.
14018 16 No Could not create the publication.
14019 16 No The @operation parameter value must be either add, drop, or alter.
14020 16 No Could not obtain the column ID for the specified column. Schema replication failed.
14021 16 No The column was not added correctly to the article.
14022 16 No The @property parameter value must be either 'description', 'sync_object', 'type', 'ins_cmd', 'del_cmd', 'upd_cmd', 'filter', 'dest_table', 'dest_object', 'creation_script', 'pre_creation_cmd', 'status', 'schema_option', or 'destination_owner'.
14023 16 No The type must be '[indexed view ]logbased[ (manualview|manualfilter|manualboth)]', '[serializable ]proc exec', or '(view|indexed view|proc|func|aggregate|synonym) schema only'.
14024 16 No The value of property 'subscriber_provider' cannot be NULL.
14025 10 No Article update successful.
14026 16 No The value of property 'subscriber_type is not a supported heterogeneous subscriber type. The value must be 1 (ODBC subscriber), or 3 (OLEDB subscriber).
14027 11 No %s does not exist in the current database.
14028 16 No Only user tables, materialized views, and stored procedures can be published as 'logbased' articles.
14029 16 No The vertical partition switch must be either 'true' or 'false'.
14030 16 No The article '%s' exists in publication '%s'.
14031 16 No User tables and views are the only valid synchronization objects.
14032 16 No The value of parameter %s cannot be 'all'. It is reserved by replication stored procedures.
14033 16 No Could not change replication frequency because there are active subscriptions on the publication.
14034 16 No The publication name (@publication) cannot be the keyword 'all'.
14035 16 No The replication option '%s' of database '%s' has already been set to true.
14036 16 No Could not enable database for publishing.
14037 16 No The replication option '%s' of database '%s' has been set to false.
14038 16 No Could not disable database for publishing.
14039 16 No Could not construct column clause for article view. Reduce the number of columns or create the view manually.
14040 16 No The server '%s' is already a Subscriber.
14041 16 No The '%s' property can only be changed if the publication is enabled for heterogeneous subscriptions. The publication is not enabled.
14042 16 No Could not create Subscriber.
14043 16 No The parameter %s passed to stored procedure %s cannot be NULL.
14044 16 No Unable to clear subscriber status for the server.
14045 16 No Unable to update subscriber_type in MSdistribution_agents table.
14046 16 No Could not drop article. A subscription exists on it.
14047 16 No Could not drop %s.
14048 16 No The server '%s' is not a Subscriber.
14049 16 No Stored procedures for replication are the only objects that can be used as a filter.
14050 11 No No subscription is on this publication or article.
14051 16 No The parameter value must be 'sync_type' or 'dest_db'.
14052 16 No The @sync_type parameter value must be "automatic", "none", "replication support only", "initialize with backup", or "initialize from lsn".
14053 16 No The subscription could not be updated at this time.
14054 10 No The subscription was updated successfully.
14055 10 No The subscription does not exist.
14056 16 No The subscription could not be dropped at this time.
14057 16 No The subscription could not be created.
14058 16 No Cannot create the subscription because the subscription already exists in the subscription database. Only one subscription to the same publication is allowed in each subscription database. Drop the subscription and add it again if necessary. If the problem persists, replication metadata might be incorrect; see Books Online for troubleshooting information.
14059 16 No Materialized view articles cannot be created for publications with the properties allow_sync_tran, allow_queued_tran, or allow_dts.
14060 16 No Subscriber parameters specifying provider properties must be NULL for SQL Server subscribers.
14061 16 No The @pre_creation_cmd parameter value must be 'none', 'drop', 'delete', or 'truncate'.
14062 10 No The Subscriber was dropped.
14063 11 No The remote server does not exist or has not been designated as a valid Subscriber.
14064 10 No Found generation stuck at genstatus 4.
14065 16 No The @status parameter value must be 'initiated', 'active', 'inactive', or 'subscribed'.
14066 16 No The previous status must be 'active', 'inactive', or 'subscribed'.
14067 16 No The status value is the same as the previous status value.
14068 16 No The subscription status of the object could not be changed.
14069 16 No Could not update sysarticles. The subscription status could not be changed.
14070 16 No Could not update the distribution database subscription table. The subscription status could not be changed.
14071 16 No Could not find the Distributor or the distribution database for the local server. The Distributor may not be installed, or the local server may not be configured as a Publisher at the Distributor.
14074 16 No The server '%s' is already listed as a Publisher.
14075 16 No The Publisher could not be created at this time.
14076 16 No Could not grant replication login permission to '%s'.
14077 10 No The publication was updated successfully.
14078 16 No The parameter must be 'description', 'taskid', 'sync_method', 'status', 'repl_freq', 'restricted', 'retention', 'immediate_sync', 'enabled_for_internet', 'allow_push', 'allow_pull', 'allow_anonymous', or 'retention'.
14080 16 No The remote server "%s" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
14085 16 No The Subscriber information could not be obtained from the Distributor.
14088 16 No The table '%s' must have a primary key to be published using the transaction-based method.
14089 16 No The clustered index on materialized view '%s' may not contain nullable columns if it is to be published using the transaction-based method.
14090 16 No Error evaluating article synchronization object after column drop. The filter clause for article '%s' must not reference the dropped column.
14091 16 No The @type parameter passed to sp_helpreplicationdb must be either 'pub' or 'sub'.
14092 16 No Could not change article because there is an existing subscription to the article.
14093 16 No Cannot grant or revoke access directly on publication '%s' because it uses the default publication access list.
14094 16 No Could not subscribe to article '%s' because heterogeneous Subscriber '%s' does not support the @pre_creation_cmd parameter value 'truncate'.
14095 16 No The value for the @sync_method parameter is not valid. Could not subscribe to publication '%s' because non-SQL Server Subscriber '%s' only supports values of 'character', 'bcp character', 'concurrent_c', and 'database snapshot character' for the @sync_method parameter.
14096 16 No The path and name of the table creation script must be specified if the @pre_creation_cmd parameter value is 'drop'.
14097 16 No The 'status' value must be 'no column names', 'include column names', 'string literals', 'parameters', 'DTS horizontal partitions' or 'no DTS horizontal partitions'.
14098 16 No Cannot drop Distribution Publisher '%s'. The remote Publisher is using '%s' as Distributor. Disable publishing at the Publisher before attempting to drop this relationship.
14099 16 No The server '%s' is already defined as a Distributor. To reconfigure the server as a Distributor, you must first uninstall the exisiting Distributor. Use the stored procedure sp_dropdistributor, or use the Disable Publishing and Distribution Wizard.
14100 16 No Specify all articles when subscribing to a publication using concurrent snapshot processing.
14101 16 No The publication '%s' already has a Snapshot Agent defined.
14102 16 No Specify all articles when unsubscribing from a publication using concurrent snapshot processing.
14103 16 No Invalid "%s" value. Valid values are "publisher", "subscriber", or "both".
14105 10 No You have updated the distribution database property '%s' successfully.
14106 16 No Distribution retention periods must be greater than or equal to 0.
14107 10 No The @max_distretention value must be larger than the @min_distretention value.
14108 10 No Removed %ld history records from %s.
14109 10 No The @security_mode parameter value must be 0 (SQL Server Authentication) or 1 (Integrated Authentication).
14110 16 No For stored procedure articles, the @property parameter value must be 'description', 'dest_table', 'dest_object', 'creation_script', 'pre_creation_cmd', 'schema_option', or 'destination_owner'.
14111 16 No The @pre_creation_cmd parameter value must be 'none' or 'drop'.
14112 16 No This procedure can be executed only against table-based articles.
14113 16 No Could not execute '%s'. Check '%s' in the install directory.
14114 16 No The server '%s' is not configured as a Distributor.
14115 16 No The property parameter value must be %s.
14117 16 No '%s' is not configured as a distribution database.
14118 16 No A stored procedure can be published only as a 'serializable proc exec' article, a 'proc exec' article, or a 'proc schema only' article.
14119 16 No Could not add the distribution database '%s'. This distribution database already exists.
14120 16 No Could not drop the distribution database '%s'. This distributor database is associated with a Publisher.
14121 16 No Could not drop the Distributor '%s'. This Distributor has associated distribution databases.
14122 16 No The @article parameter value must be 'all' for immediate_sync publications.
14123 16 No The subscription @sync_type parameter value 'manual' is no longer supported.
14124 16 No A publication must have at least one article before a subscription to it can be created.
14126 16 No You do not have the required permissions to complete the operation.
14128 16 No Invalid @subscription_type parameter value. Valid options are 'push' or 'pull'.
14129 16 No The @status parameter value must be NULL for 'automatic' sync_type when you add subscriptions to an immediate_sync publication.
14135 16 No There is no subscription on Publisher '%s', publisher database '%s', publication '%s'.
14136 16 No The keyword 'all' is reserved by replication stored procedures.
14137 16 No The @value parameter value must be either 'true' or 'false'.
14138 16 No Invalid option name '%s'.
14139 16 No The replication system table '%s' already exists.
14143 16 No Cannot drop Distributor Publisher '%s'. There are Subscribers associated with it in the distribution database '%s'.
14144 16 No Cannot drop Subscriber '%s'. There are subscriptions for it in the publication database '%s'.
14146 16 No The article parameter '@schema_option' cannot be NULL.
14147 16 No Restricted publications are no longer supported.
14148 16 No Invalid '%s' value. Valid values are 'true' or 'false'.
14149 10 No Removed %ld replication history records in %s seconds (%ld row/secs).
14150 10 No Replication-%s: agent %s succeeded. %s
14151 18 Yes Replication-%s: agent %s failed. %s
14152 10 Yes Replication-%s: agent %s scheduled for retry. %s
14153 10 No Replication-%s: agent %s warning. %s
14154 16 No The Distributor parameter must be '@heartbeat_interval'.
14155 16 No Invalid article ID specified for procedure script generation.
14156 16 No The custom stored procedure calling the format for the %s command specified in the article definition does not match the %s format.
14157 10 Yes The subscription created by Subscriber '%s' to publication '%s' has expired and has been dropped.
14158 10 No Replication-%s: agent %s: %s.
14159 16 No Could not change property '%s' for article '%s' because there is an existing subscription to the article.
14160 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and change the expiration threshold value if necessary.
14161 10 Yes The threshold [%s:%s] for the publication [%s] has been set. Make sure that the logreader and distribution agents are running and can match the latency requirement.
14162 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14163 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14164 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14165 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14166 10 No Disable publishing ignored error msg %d, severity %d, state %d: %s.
14167 10 No Subscription expiration
14168 10 No Transactional replication latency
14169 10 No Long merge over dialup connection
14170 10 No Long merge over LAN connection
14171 10 No Slow merge over LAN connection
14172 10 No Slow merge over dialup connection
14173 18 Yes Replication-%s: agent initialization failed. %s
14196 10 No The agent has never been run.
14197 10 No Value of %s parameter should be in the set %s
14198 10 No The value of the %s parameter should be in the range %s. Verify that the specified parameter value is correct.
14199 10 No The specified job '%s' is not created for maintenance plans. Verify that the job has at least one step calling xp_sqlmaint.
14200 16 No The specified '%s' is invalid.
14201 10 No 0 (all steps) ..
14202 10 No before or after @active_start_time
14203 10 No sp_helplogins [excluding Windows NT groups]
14204 10 No 0 (non-idle), 1 (executing), 2 (waiting for thread), 3 (between retries), 4 (idle), 5 (suspended), 7 (performing completion actions)
14205 10 No (unknown)
14206 10 No 0..n seconds
14207 10 No -1 [no maximum], 0..n
14208 10 No 1..7 [1 = E-mail, 2 = Pager, 4 = NetSend]
14209 10 No 0..127 [1 = Sunday .. 64 = Saturday]
14210 10 No notification
14211 10 No server
14212 10 No (all jobs)
14213 10 No Core Job Details:
14214 10 No Job Steps:
14215 10 No Job Schedules:
14216 10 No Job Target Servers:
14217 10 No SQL Server Warning: '%s' has performed a forced defection of TSX server '%s'. Run sp_delete_targetserver at the MSX in order to complete the defection.
14218 10 No hour
14219 10 No minute
14220 10 No second
14221 16 No This job has one or more notifications to operators other than '%s'. The job cannot be targeted at remote servers as currently defined.
14222 16 No Cannot rename the '%s' operator.
14223 16 No Cannot modify or delete operator '%s' while this server is a %s.
14224 10 No Warning: The server name given is not the current MSX server ('%s').
14225 16 No Warning: Could not determine local machine name. This prevents MSX operations from being posted.
14226 10 No %ld history entries purged.
14227 10 No Server defected from MSX '%s'. %ld job(s) deleted.
14228 10 No Server MSX enlistment changed from '%s' to '%s'.
14229 10 No Server enlisted into MSX '%s'.
14230 10 No SP_POST_MSX_OPERATION: %ld %s download instruction(s) posted.
14231 10 No SP_POST_MSX_OPERATION Warning: The specified %s ('%s') is not involved in a multiserver job.
14232 16 No Specify either a job_name, job_id, or an originating_server.
14233 16 No Specify a valid job_id (or 0x00 for all jobs).
14234 16 No The specified '%s' is invalid (valid values are returned by %s).
14235 16 No The specified '%s' is invalid (valid values are greater than 0 but excluding %ld).
14236 10 No Warning: Non-existent step referenced by %s.
14237 16 No When an action of 'REASSIGN' is specified, the New Login parameter must also be supplied.
14238 10 No %ld jobs deleted.
14239 10 No %ld jobs reassigned to %s.
14240 10 No Job applied to %ld new servers.
14241 10 No Job removed from %ld servers.
14242 16 No Only a system administrator can reassign ownership of a job.
14243 10 No Job '%s' started successfully.
14245 16 No Specify either the @name, @id, or @loginname of the task(s) to be deleted.
14250 16 No The specified %s is too long. It must contain no more than %ld characters.
14251 16 No Cannot specify '%s' as the operator to be notified.
14252 16 No Cannot perform this action on a job you do not own.
14253 10 No %ld (of %ld) job(s) stopped successfully.
14254 10 No Job '%s' stopped successfully.
14255 16 No The owner ('%s') of this job is either an invalid login, or is not a valid user of database '%s'.
14256 16 No Cannot start the job "%s" (ID %s) because it does not have any job server or servers defined. Associate the job with a job server by calling sp_add_jobserver.
14257 16 No Cannot stop the job "%s" (ID %s) because it does not have any job server or servers defined. Associate the job with a job server by calling sp_add_jobserver.
14258 16 No Cannot perform this operation while SQLServerAgent is starting. Try again later.
14260 16 No You do not have sufficient permission to run this command. Contact your system administrator.
14261 16 No The specified %s ('%s') already exists.
14262 16 No The specified %s ('%s') does not exist.
14263 16 No Target server '%s' is already a member of group '%s'.
14264 16 No Target server '%s' is not a member of group '%s'.
14265 24 Yes The MSSQLServer service terminated unexpectedly. Check the SQL Server error log and operating system error logs for possible causes.
14266 16 No The specified '%s' is invalid (valid values are: %s).
14267 16 No Cannot add a job to the '%s' job category.
14268 16 No There are no jobs at this server that originated from server '%s'.
14269 16 No Job '%s' is already targeted at server '%s'.
14270 16 No Job '%s' is not currently targeted at server '%s'.
14271 16 No A target server cannot be named '%s'.
14272 16 No Object-type and object-name must be supplied as a pair.
14273 16 No You must provide either @job_id or @job_name (and, optionally, @schedule_name), or @schedule_id.
14274 16 No Cannot add, update, or delete a job (or its steps or schedules) that originated from an MSX server.
14275 16 No The originating server must be either local server or MSX server.
14276 16 No '%s' is a permanent %s category and cannot be deleted.
14277 16 No The command script does not destroy all the objects that it creates. Revise the command script.
14278 16 No The schedule for this job is invalid (reason: %s).
14279 16 No Supply either @job_name, @job_id or @originating_server.
14280 16 No Supply either a job name (and job aspect), or one or more job filter parameters.
14281 10 No Warning: The @new_owner_login_name parameter is not necessary when specifying a 'DELETE' action.
14282 16 No Supply either a date (created or last modified) and a data comparator, or no date parameters at all.
14283 16 No Supply @target_server_groups or @target_servers, or both.
14284 16 No Cannot specify a job ID for a new job. An ID will be assigned by the procedure.
14285 16 No Cannot add a local job to a multiserver job category.
14286 16 No Cannot add a multiserver job to a local job category.
14287 16 No The '%s' supplied has an invalid %s.
14288 16 No %s cannot be before %s.
14289 16 No %s cannot contain '%s' characters.
14290 16 No This job is currently targeted at the local server so cannot also be targeted at a remote server.
14291 16 No This job is currently targeted at a remote server so cannot also be targeted at the local server.
14292 16 No There are two or more tasks named '%s'. Specify %s instead of %s to uniquely identify the task.
14293 16 No There are two or more jobs named '%s'. Specify %s instead of %s to uniquely identify the job.
14294 16 No Supply either %s or %s to identify the job.
14295 16 No Frequency Type 0x2 (OnDemand) is no longer supported.
14296 16 No This server is already enlisted into MSX '%s'.
14297 16 No Cannot enlist into the local machine.
14298 16 No This server is not currently enlisted into an MSX.
14299 16 No Server '%s' is an MSX. Cannot enlist one MSX into another MSX.
14301 16 No Logins other than the current user can only be seen by members of the sysadmin role.
14305 16 No Column '%.*ls' does not exist in table '%.*ls'.
14306 16 No The target server (TSX) version is not compatible with the master server (MSX) version (%ld.%ld.%ld).
14307 16 No Access to Integration Services package '%s' is denied.
14350 16 No Cannot initialize COM library because CoInitialize failed.
14351 16 No Cannot complete this operation because an unexpected error occurred.
14353 16 No Cannot determine the service account for this SQL Server instance.
14357 16 No Cannot list '%s' in Active Directory because the name is too long. Active Directory common names cannot exceed 64 characters.
14360 16 No %s is already configured as TSX machine
14362 16 No The MSX server must be running the Standard or Enterprise edition of SQL Server
14363 16 No The MSX server is not prepared for enlistments [there must be an operator named 'MSXOperator' defined at the MSX]
14364 16 No The TSX server is not currently enlisted
14365 16 No Specify a valid schedule_uid.
14366 16 No Only members of sysadmin role can modify the owner of a schedule.
14367 16 No One or more schedules were not deleted because they are being used by at least one other job. Use "sp_detach_schedule" to remove schedules from a job.
14368 16 No Schedule "%s" was not deleted because it is being used by at least one other job. Use "sp_detach_schedule" to remove schedules from a job.
14369 16 No The schedule ID "%s" is used by more than one job. Specify the job_id.
14370 16 No The @originating_server must be either the local server name or the master server (MSX) name for MSX jobs on a target server (TSX).
14371 16 No There are two or more schedules named "%s". Specify %s instead of %s to uniquely identify the schedule.
14372 16 No The schedule was not deleted because it is being used by one or more jobs.
14373 16 No Supply either %s or %s to identify the schedule.
14374 16 No The specified schedule name "%s" is not associated with the job "%s".
14375 16 No More than one schedule named "%s" is attached to job "%s". Use "sp_update_schedule" to update schedules.
14376 16 No More than one schedule named "%s" is attached to job "%s". Use "sp_detach_schedule" to remove schedules from a job.
14377 16 No The schedule was not attached to the specified job. The caller must own the job or the operation must be performed by a sysadmin.
14378 16 No @sysadmin_only flag is no longer supported by SQLAgent and kept here only for backwards compatibility
14379 16 No Table '%s' foreign key 'originating_server_id' does not have a matching value in the referenced view 'dbo.sysoriginatingservers_view'.
14380 16 No Field 'originating_server_id' in table sysoriginatingservers is being referenced by either sysjobs or sysschedules.
14390 16 No Only members of role sysadmin can specify the %s parameter.
14391 16 No Only owner of a job or members of sysadmin role can detach a schedule.
14392 16 No Only owner of a job or members of role sysadmin or SQLAgentOperatorRole can purge history of the job.
14393 16 No Only owner of a job or members of role sysadmin or SQLAgentOperatorRole can start and stop the job.
14394 16 No Only owner of a job schedule or members of sysadmin role can modify or delete the job schedule.
14395 16 No '%s' is a member of sysadmin server role and cannot be granted to or revoked from the proxy. Members of sysadmin server role are allowed to use any proxy.
14396 16 No Only members of sysadmin server role can modify multi-server jobs
14397 16 No Only members of sysadmin server role can start/stop multi-server jobs
14398 16 No Only members of sysadmin server role can create multi-server jobs
14399 16 No Current proxy_id %d and new proxy_id %d cannot be the same.
14400 16 No Proxy %d does not have access to subsystem %d. Please use sp_grant_proxy_to_subsystem to grant permissions to this proxy.
14410 16 No You must supply either a plan_name or a plan_id.
14411 16 No Cannot delete this plan. The plan contains enlisted databases.
14412 16 No The destination database is already part of a log shipping plan.
14413 16 No This database is already log shipping.
14414 16 No A log shipping monitor is already defined.
14415 16 No The user name cannot be null when using SQL Server authentication.
14416 16 No This stored procedure must be run in msdb.
14417 16 No Cannot delete the monitor server while databases are participating in log shipping.
14418 16 No The specified @backup_file_name was not created from database '%s'.
14419 16 No The specified @backup_file_name is not a database backup.
14420 16 Yes The log shipping primary database %s.%s has backup threshold of %d minutes and has not performed a backup log operation for %d minutes. Check agent log and logshipping monitor information.
14421 16 Yes The log shipping secondary database %s.%s has restore threshold of %d minutes and is out of sync. No restore was performed for %d minutes. Restored latency is %d minutes. Check agent log and logshipping monitor information.
14422 16 No Supply either @plan_id or @plan_name.
14423 16 No Other databases are enlisted on this plan and must be removed before the plan can be deleted.
14424 16 No The database '%s' is already involved in log shipping.
14425 16 No The database '%s' does not seem to be involved in log shipping.
14426 16 No A log shipping monitor is already defined. Call sp_define_log_shipping_monitor with @delete_existing = 1.
14427 16 No A user name is necessary for SQL Server security.
14428 16 No Could not remove the monitor as there are still databases involved in log shipping.
14429 16 No There are still secondary servers attached to this primary.
14430 16 No Destination path %s is not valid. Unable to list directory contents. Specify a valid destination path.
14440 16 No Could not set single user mode.
14441 16 No Role change succeeded.
14442 16 No Role change failed.
14450 16 No The specified @backup_file_name was not taken from database '%s'.
14451 16 No The specified @backup_file_name is not a database backup.
14500 16 No Supply either a non-zero message ID, non-zero severity, non-null performance condition, or non-null WMI namespace and query.
14501 16 No An alert ('%s') has already been defined on this condition.
14502 16 No The @target_name parameter must be supplied when specifying an @enum_type of 'TARGET'.
14503 16 No The @target_name parameter should not be supplied when specifying an @enum_type of 'ALL' or 'ACTUAL'.
14504 16 No '%s' is the fail-safe operator. You must make another operator the fail-safe operator before '%s' can be dropped.
14505 16 No Specify a null %s when supplying a performance condition.
14506 16 No Cannot set alerts on message ID %ld.
14507 16 No A performance condition must be formatted as: 'object_name|counter_name|instance_name|comparator(> or < or =)|numeric value'.
14508 16 No Specify both @wmi_namespace and @wmi_query.
14509 16 No Specify a valid %s when supplying a @wmi_namespace.
14510 16 No Specify a null %s when supplying a @wmi_namespace.
14511 16 No The @wmi_query could not be executed in the @wmi_namespace provided. Verify that an event class selected in the query exists in the namespace and that the query has the correct syntax.
14512 16 No Specify a valid %s when supplying a @wmi_query.
14513 10 No Analysis query subsystem
14514 10 No Analysis command subsystem
14515 16 No Only a member of the sysadmin server role can add a job for a different owner with @owner_login_name.
14516 16 No Proxy (%d) is not allowed for subsystem "%s" and user "%s". Grant permission by calling sp_grant_proxy_to_subsystem or sp_grant_login_to_proxy.
14517 16 No A proxy account is not allowed for a Transact-SQL subsystem.
14518 16 No Cannot delete proxy (%d). It is used by at least one jobstep. Change this proxy for all jobsteps by calling sp_reassign_proxy.
14519 16 No Only one of @login_name, @fixed_server_role, or @msdb_role should be specified.
14520 16 No "%s" is not a valid SQL Server standard login, Windows NT user, Windows NT group, or msdb database role.
14521 16 No "%s" is not a valid SQL Server fixed server role, Windows NT user, or Windows NT group.
14522 16 No '"%s" is not a valid role of an msdb database, Windows NT user, or Windows NT group.
14523 16 No "%s" has not been granted permission to use proxy "%s".
14524 16 No Supply either %s or %s.
14525 16 No Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
14526 16 No The specified category "%s" does not exist for category class "%s".
14527 16 No Job "%s" cannot be used by an alert. It should first be associated with a server by calling sp_add_jobserver.
14528 16 No Job "%s" has no steps defined.
14529 16 No Proxy "%s" is not a valid Windows user.
14530 16 No The Transact-SQL subsystem cannot be executed under the context of a proxy account.
14531 16 No Permission to access proxy already granted. Verify current permissions assignments.
14532 16 No Supply both %s and %s, or none of them.
14533 16 No Use either a proxy or user_domain, user_name, or user_password parameter.
14534 16 No All user_domain, user_name, and user_password parameters should be defined.
14535 16 No The user_domain, user_name, and user_password parameters can be specified only for replication subsystems.
14536 16 No Only members of the sysadmin role can specify a "%s" parameter.
14537 16 No Execution in the context of disabled proxy (proxy_id = %d) is not allowed. Contact your system administrator.
14538 10 No SSIS package execution subsystem
14539 16 No Only a Standard or Enterprise edition of SQL Server can be enlisted into an MSX.
14540 16 No Only a SQL Server running on Microsoft Windows NT can be enlisted into an MSX.
14541 16 No The version of the MSX (%s) is not recent enough to support this TSX. Version %s or later is required at the MSX.
14542 16 No It is invalid for any TSQL step of a multiserver job to have a non-null %s value.
14543 16 No Login '%s' owns one or more multiserver jobs. Ownership of these jobs can only be assigned to members of the %s role.
14544 16 No This job is owned by '%s'. Only a job owned by a member of the %s role can be a multiserver job.
14545 16 No The %s parameter is not valid for a job step of type '%s'.
14546 16 No The %s parameter is not supported on Windows 95/98 platforms.
14547 10 No Warning: This change will not be downloaded by the target server(s) until an %s for the job is posted using %s.
14548 10 No Target server '%s' does not have any jobs assigned to it.
14549 10 No (Description not requested.)
14550 10 No Command-Line Subsystem
14551 10 No Replication Snapshot Subsystem
14552 10 No Replication Transaction-Log Reader Subsystem
14553 10 No Replication Distribution Subsystem
14554 10 No Replication Merge Subsystem
14555 10 No Active Scripting Subsystem
14556 10 No Transact-SQL Subsystem
14557 10 No [Internal]
14558 10 No (encrypted command)
14559 10 No (append output file)
14560 10 No (include results in history)
14561 10 No (normal)
14562 10 No (quit with success)
14563 10 No (quit with failure)
14564 10 No (goto next step)
14565 10 No (goto step)
14566 10 No (idle)
14567 10 No (below normal)
14568 10 No (above normal)
14569 10 No (time critical)
14570 10 No (Job outcome)
14571 10 No No description available.
14572 10 No @freq_interval must be at least 1 for a daily job.
14573 10 No @freq_interval must be a valid day of the week bitmask [Sunday = 1 .. Saturday = 64] for a weekly job.
14574 10 No @freq_interval must be between 1 and 31 for a monthly job.
14575 10 No @freq_relative_interval must be one of 1st (0x1), 2nd (0x2), 3rd [0x4], 4th (0x8) or Last (0x10).
14576 10 No @freq_interval must be between 1 and 10 (1 = Sunday .. 7 = Saturday, 8 = Day, 9 = Weekday, 10 = Weekend-day) for a monthly-relative job.
14577 10 No @freq_recurrence_factor must be at least 1.
14578 10 No Starts whenever the CPU usage has remained below %ld percent for %ld seconds.
14579 10 No Automatically starts when SQLServerAgent starts.
14580 10 No job
14581 10 No Replication Transaction Queue Reader Subsystem
14582 16 No Only a sysadmin can specify '@output_file_name' parameter for a jobstep.
14583 16 No Only a sysadmin can specify '@database_user_name' parameter.
14585 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may reassign its ownership.
14586 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may create new versions of it.
14587 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may drop it or any of its versions.
14588 10 No ID.VersionID =
14589 10 No [not specified]
14590 16 No DTS Package '%s' already exists with a different ID in this category.
14591 16 No SSIS folder '%s' already exists in the specified parent folder.
14592 16 No DTS Category '%s' was found in multiple parent categories. You must uniquely specify the category to be dropped.
14593 16 No SSIS folder '%s' contains packages and/or other folders. You must drop these first.
14594 10 No DTS Package
14595 16 No DTS Package '%s' exists in different categories. You must uniquely specify the package.
14596 16 No DTS Package '%s' exists in another category.
14597 16 No DTS Package ID '%s' already exists with a different name.
14598 16 No Cannot drop the Local, Repository, or LocalDefault DTS categories.
14599 10 No Name
14600 16 No Proxy "%s" has not been granted permission to use subsystem "%s".
14601 16 No Operator "%s" is not enabled and therefore cannot receive notifications.
14602 16 No Operator "%s" does not have an e-mail address specified.
14603 16 No Database Mail is not properly configured.
14604 16 No Both %s parameters (id and name) cannot be NULL
14605 16 No Both %s parameters (id and name) do not point to the same object
14606 16 No %s id is not valid
14607 16 No %s name is not valid
14608 16 No Either %s or %s parameter needs to be supplied
14609 16 No Mail database to user database association does not exist and therefore cannot be updated
14610 16 No Either @profile_name or @description parameter needs to be specified for update
14611 16 No Account sequence number must be supplied for update
14612 16 No Each principal should have at least one default profile
14613 16 No The specified '%s' cannot use commas (,) to separate addresses: '%s'. To continue, use semicolons (;) to separate addresses.
14614 16 No %s is not a valid mailserver_type
14615 16 No The @username parameter needs to be supplied if the @password is supplied.
14616 16 No Unable to retrieve the newly created credential [%s] from the credential store.
14617 16 No Mail host database specified is invalid
14618 16 No Parameter '%s' must be specified. This parameter cannot be NULL.
14619 16 No Received an error on the Service Broker conversation with Database Mail. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for information.
14620 16 No The Service Broker conversation to Database Mail ended without a response from Database Mail. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for more information.
14621 16 No Parameter @attachmentencoding does not support the value "%s". The attachment encoding must be "MIME".
14622 16 No Parameter @importance does not support the value "%s". Mail importance must be one of LOW, NORMAL, or HIGH.
14623 16 No Parameter @sensitivity does not support the value "%s". Mail sensitivity must be one of NORMAL, PERSONAL, PRIVATE, or CONFIDENTIAL.
14624 16 No At least one of the following parameters must be specified. "%s".
14625 16 No Parameter @attach_query_result_as_file cannot be 1 (true) when no value is specified for parameter @query. A query must be specified to attach the results of the query.
14626 16 No Parameter @mailformat does not support the value "%s". The mail format must be TEXT or HTML.
14627 16 No Received error %d while sending a message as part of the %s operation. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for more information.
14628 16 No The format of the parameter @attachments is incorrect. The file names must be separated by a semicolon ";".
14629 16 No There is no configuration parameter named "%s", or the value provided is not of the correct data type.
14630 16 No Database Mail is not permitted to send files with the file extension %s.
14631 16 No The current user ('%s') either does not have permission to access the database specified in the parameter @execute_query_database or cannot impersonate the user specified in the parameter @execute_query_as. Only members of the sysadmin fixed server role and members of the db_owner fixed database role can impersonate another user.
14632 16 No The user name %s specified in @execute_query_as is invalid. There is no user by that name.
14633 16 No The database name "%s" specified in @execute_query_database is invalid. There is no database by that name.
14634 10 No Warning: %s'
14635 10 No Mail (Id: %d) queued.
14636 16 No No global profile is configured. Specify a profile name in the @profile_name parameter.
14637 10 No Activation failure.
14638 10 No Activation successful.
14639 10 No The mail queue was started by login "%s".
14640 10 No The mail queue stopped by login "%s".
14641 16 No Mail not queued. Database Mail is stopped. Use sysmail_start_sp to start Database Mail.
14642 10 No Default attachment encoding
14643 10 No Default dialog lifetime
14644 10 No Default maximum file size
14645 10 No Extensions not allowed in outgoing mails
14646 10 No Number of retry attempts for a mail server
14647 10 No Delay between each retry attempt to mail server
14648 10 No Minimum process lifetime in seconds
14649 16 No Unable to test profile. Database Mail is stopped. Use sysmail_start_sp to start Database Mail.
14650 16 No Service Broker message delivery is not enabled in this database. Use the ALTER DATABASE statement to enable Service Broker message delivery.
14651 16 No Unable to test profile. Service Broker message delivery is not enabled in this database. Use the ALTER DATABASE statement to enable Service Broker message delivery.
14652 16 No Invalid message received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14653 16 No Invalid %s value received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14654 10 No Unexpected message received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14655 16 No Invalid XML message format received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14657 16 No Mail not queued. Maximum number of mails per day (%ld) for login %s has been exceeded.
14658 16 No Failed to retrieve SQLPath for syssubsystems population.
14659 16 No Failed to retrieve VerSpecificRootDir for syssubsystems population.
14660 16 No Database Compatibility Level is too low. Compatibility Level must be Version80 or higher.
14661 16 No Query execution failed: %s
14662 10 No mailitem_id on conversation %s was not found in the sysmail_send_retries table. This mail item will not be sent.
14663 10 No Mail Id %d has exceeded the retry count. This mail item will not be sent.
14664 16 No Database Mail logging level: normal - 1, extended - 2 (default), verbose - 3
14665 10 No Mail items deletion is initiated by user "%s". %d items deleted.
14666 16 No User name cannot be supplied when using default credentials
14667 16 No Mail Id %d has been deleted from sysmail_mailitems table. This mail will not be sent.
14668 16 No Deleting profile %s failed because there are some unsent emails associated with this profile, use force_delete option to force the deletion of the profile.
14670 16 No Cannot delete the active collection set '%s'. Stop the collection set and then try to delete it again.
14671 16 No Cannot update the name or the parameters of the collection item '%s' in the active collection set '%s'. Stop the collection set and then try to update the collection item again.
14672 16 No Cannot delete the collection item '%s' in the active collection set '%s'. Stop the collection set and then try to delete the collection item again.
14673 16 No Cannot delete the collector type '%s'. Delete all collection items associated with this collector type and then try to delete it again.
14674 16 No Cannot upload data for the inactive collection set '%s'. Start the collection set and then try to upload the data again.
14675 16 No Cannot update the name, target, proxy_id, logging_level, or collection_mode, or add collection item to the active collection set '%s'. Stop the collection set and then try to update it again.
14676 16 No The user does not have permission to change '%s'. The user must be a member of data collector role '%s'.
14677 16 No The user does not have permission to perform this operation. The user must be a member of data collector role '%s'.
14678 16 No SQL Server Trace with id %d has been stopped and closed by external user. SQL Server Trace collector will attempt to re-create the trace.
14679 16 No The specified %s (%s) is not valid in this data warehouse.
14680 16 No Management Data Warehouse database can only be installed on an instance of SQL Server 2008 or higher.
14681 16 No Cannot perform this procedure when the collector is disabled. Enable the collector and then try again.
14682 16 No The state of the collection set has changed, but it will not start or stop until the collector is enabled.
14683 16 No A collection set in cached mode requires a schedule.
14684 16 No Caught error#: %d, Level: %d, State: %d, in Procedure: %s, Line: %d, with Message: %s
14685 16 No Collection set: '%s' does not contain any collection items, so starting the collection set will have no effect.
14686 16 No The MDWInstance and MDWDatabase parameters of the configuration store cannot be null.
14687 16 No Invalid value (%d) of the @cache_window parameter. Allowable values are: -1 (cache all upload data from previous upload failures), 0 (cache no upload data), N (cache data from N previous upload failures, where N >= 1)
14688 16 No A collection set cannot start when SQL Server Agent is stopped. Start SQL Server Agent.
14689 16 No A collection set cannot start if the management data warehouse is not configured. Run the instmdw.sql script to create and configure the management data warehouse.
14690 16 No Cannot perform this procedure when the collector is enabled. Disable the collector and then try again.
14691 16 No The status of the collector cannot be null. This may indicate an internal corruption in the collector configuration data.
14692 16 No Insufficient priveleges to start collection set: '%s'. Only a member of the 'sysadmin' fixed server role can start a collection set without a SQL Server Agent proxy. Attach a SQL Server Agent proxy to the collection set before retrying.
14693 16 No A collection set cannot start without a schedule. Specify a schedule for the collection set.
14694 16 No Cannot upload data on-demand for the collection set '%s' in non-cached mode.
14695 16 No Cannot collect data on-demand for the collection set '%s' in cached mode.
14696 16 No Cannot update or delete a system collection set, or add new collection items to it.
14697 16 No Unable to convert showplan to XML. Error #%d on Line %d: %s
14698 10 No PowerShell Subsystem
14699 16 No Data Collector cannot be enabled when SQL Server Agent is stopped. Start SQL Server Agent.
14700 10 No Collects data about the disk and log usage for all databases.
14701 10 No Disk Usage
14702 10 No Disk Usage - Data Files
14703 10 No Disk Usage - Log Files
14704 10 No Collects top-level performance indicators for the computer and the Database Engine. Enables analysis of resource use, resource bottlenecks, and Database Engine activity.
14705 10 No Server Activity
14706 10 No Server Activity - DMV Snapshots
14707 10 No Server Activity - Performance Counters
14708 10 No Collects query statistics, T-SQL text, and query plans of most of the statements that affect performance. Enables analysis of poor performing queries in relation to overall SQL Server Database Engine activity.
14709 10 No Query Statistics
14710 10 No Query Statistics - Query Activity
14711 10 No Changes to SQL dumper configuration will take effect when the collection set is restarted. To perform an immediate dump, use the dtutil /dump option.
14712 16 No Only dbo or members of dc_admin can install or upgrade instmdw.sql. Contact an administrator with sufficient permissions to perform this operation.
14713 21 No A management data warehouse cannot be installed to SQL Server Express Edition.
14714 16 No Attempting to upgrade a Management Data Warehouse of newer version '%s' with an older version '%s'. Upgrade aborted.
14715 10 No Collects data about instances of SQL Server that are managed in the SQL Server Utility.
14716 10 No Utility Information
14718 10 No Utility Information - Managed Instance
14719 16 No "%s" has not been granted permission to use proxy.
14720 16 No The operation failed because credential '%s' identity is not a valid Windows account
14721 10 No AutoAdmin Subsystem
14801 16 No Multiple REMOTE_DATA_ARCHIVE definition.
14802 16 No Cannot disable REMOTE_DATA_ARCHIVE because the database contains at least one table having REMOTE_DATA_ARCHIVE enabled.
14803 16 No Cannot alter REMOTE_DATA_ARCHIVE option for table '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled for the database.
14804 16 No The database credential '%s' cannot be found or the user doesn't have premission to access the credential.
14806 16 No The identity specified for the database credential '%s' is invalid. The identity must be a valid username for the remote stretch server administrator.
14807 16 No The secret specified for the database credential '%s' is invalid. The secret must be a valid password for the remote stretch server administrator.
14808 16 No Cannot disable REMOTE_DATA_ARCHIVE when migration is enabled.
14809 16 No Cannot enable REMOTE_DATA_ARCHIVE on database '%s'. The REMOTE_DATA_ARCHIVE option can only be set on user databases.
14810 16 No The database option REMOTE_DATA_ARCHIVE is already enabled on database '%s'.
14811 16 No Remote server '%s' is not an Azure SQL Database V12 (or higher) server. A database can only be stretched to an Azure SQL Database V12 (or higher) server.
14812 16 No Cannot enable REMOTE_DATA_ARCHIVE for table '%.*ls' due to '%ls'. %ls
14813 16 No Cannot enable REMOTE_DATA_ARCHIVE for table '%.*ls' due to column '%.*ls' '%ls'. %ls
14814 16 No Code generation for REMOTE_DATA_ARCHIVE failed (%ls).
14815 16 No File error during REMOTE_DATA_ARCHIVE operation. GetLastError = %d (%ls).
14816 16 No The code generation directory cannot be created or set up correctly.
14817 16 No The server '%s' is not accessible. Ensure that the remote server exists and the Azure SQL DB Firewall Rules permit access to the server. If you believe that your server should be accessible please retry the command.
14818 10 No The %ls on table '%ls' will not be enforced because of the use of REMOTE_DATA_ARCHIVE.
14819 20 No Stretch operation failed due to an internal error.
14820 20 No The stretch code generator output is corrupted. Stretch code generation and remote table provisioning will be re-tried.
14821 16 No Cannot execute in REMOTE_ONLY mode since remote part does not exist or is invalid for this operation.
14822 16 No '%s' is not a valid option for the @mode parameter. Enter 'ALL', 'LOCAL_ONLY' or 'REMOTE_ONLY'.
14823 16 No %ls failed on table '%.*ls' because it is not supported on tables with REMOTE_DATA_ARCHIVE option enabled.
14824 16 No Access to REMOTE_DATA_ARCHIVE has been disabled through server configuration option 'remote data archive'. Use "exec sp_configure 'remote data archive', 1" to enable access to the server.
14825 16 No Cannot perform '%ls' on table '%.*ls' because REMOTE_DATA_ARCHIVE is enabled. %ls
14826 14 No Update and delete of rows eligible for migration in table '%.*ls' is not allowed because of the use of REMOTE_DATA_ARCHIVE.
14827 16 No Unable to access remote data archive: Error: %d, Severity: %d, State: %d, Line: %d '%s'
14828 16 No Cannot perform 'CREATE INDEX' on view '%.*ls' because it references table '%.*ls' with REMOTE_DATA_ARCHIVE enabled.
14829 16 No Table '%.*ls' cannot be used in READTEXT, WRITETEXT and UPDATETEXT statements because it has REMOTE_DATA_ARCHIVE option enabled.
14830 16 No Cannot query table '%.*ls' because this operation is currently disabled for this object.
14831 16 No Cannot set the Remote Data Archive query mode for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14832 10 No Querying tables having REMOTE_DATA_ARCHIVE option enabled will not be possible in LOCAL_AND_REMOTE query mode in database '%.*ls' before Remote Data Archive re-authorization is performed.
14833 16 No Cannot set the Remote Data Archive query mode LOCAL_AND_REMOTE for database '%.*ls' because data on remote side is not consistent. See the SQL Server errorlog for more information on the inconsistent objects.
14834 16 No Cannot de-authorize database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14835 16 No Cannot de-authorize database '%.*ls' because it is already disconnected from the remote database.
14836 16 No Cannot reconcile stretched indexes for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14837 16 No Cannot reconcile indexes for stretched table '%.*ls' because migration is not outbound on the table.
14838 16 No Table '%.*ls' cannot be accessed in SNAPSHOT transaction isolation level because it has REMOTE_DATA_ARCHIVE option enabled.
14839 16 No Only column identifiers are allowed as parameters passed to function '%.*ls'.
14840 16 No The filter predicate cannot be set for table '%.*ls' because all rows are already eligible for migration.
14841 16 No The filter predicate '%.*ls' for table '%.*ls' cannot be replaced with '%.*ls' because conditions necessary to perform the replacement are not satisfied.
14842 10 No The database '%.*ls' contains REMOTE_DATA_ARCHIVE tables, it will be marked as disconnected from the remote during the restore. If you would like to reconnect to the same archive or make a copy, refer to the sp_rda_reauthorize_db spec proc once the restore is complete.
14843 10 No Copying remote database '%.*ls' to remote database '%.*ls'.
14844 10 No Remote database '%.*ls' has completed copying, and is now online.
14845 10 No Waiting for remote database copy to complete.
14846 16 No Cannot re-authorize database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14847 16 No Cannot re-authorize database '%.*ls' because it is already authorized and connected to a remote database.
14848 16 No Attempted Migration failed. Remote insert failed. Error : %d.
14849 16 No Attempted Migration failed. Remote insert failed to insert all the rows. Expected rows : %d, Actual remote rows inserted: %d.
14850 16 No Attempted Migration failed. Incrementation of the batch ID failed. Expected batch ID : %I64d, Current batch ID : %I64d.
14851 16 No Attempted Reconciliation failed. The new max remote batch IDs is not less than the initial. Initial: %I64d, New: %I64d
14852 16 No Cannot query table '%.*ls' because data reconciliation is in progress. This is part of the automatic recovery process for a remote data archive enabled table. You may check the status of this operation in sys.remote_data_archive_tables.
14853 16 No Function '%.*ls' cannot be used as Stretch filter predicate because it does not meet necessary requirements.
14854 10 No The Remote Data Archive connection to the server '%ls' succeeded.
14855 16 No The Remote Data Archive connection to the server '%ls' failed.
14856 16 No The procedure %ls requires the %ls parameter if the database is not enabled for REMOTE_DATA_ARCHIVE.
14857 16 No The procedure %ls does not accept the %ls parameter if the database is enabled for REMOTE_DATA_ARCHIVE.
14858 16 No Cannot queue more stretch tasks. Please wait for remaining tasks to be finished and try again later.
14859 10 No The database '%.*ls' contains REMOTE_DATA_ARCHIVE tables, it will be marked as disconnected from the remote during the restore. If you would like to reconnect to the same archive or make a copy, refer to the sp_rda_reauthorize_db spec proc once the restore is complete.
14860 16 No '%.*ls' expects parameter '%.*ls', which was not supplied.
14861 16 No Modifying the collation is not allowed when REMOTE_DATA_ARCHIVE is already enabled on database '%.*ls'.
14862 16 No Cannot rename index '%ls'. Indexes on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
14863 16 No Stretch was disabled after migration started. Please enable stretch and retry.
14864 16 No Attempted inbound migration failed. Local insert failed. Error : %d.
14865 16 No Attempted inbound migration failed. Decrementation of the batch ID failed. Expected batch ID : %I64d, Current batch ID : %I64d.
14866 16 No Attempted unlinking of the stretched table failed. If this table isn't dropped, please retry the operation of setting REMOTE_DATA_ARCHIVE to OFF on the table.
14867 16 No User does not have permission to enable REMOTE_DATA_ARCHIVE with FEDERATED_SERVICE_ACCOUNT = ON.
14868 16 No Inbound migration is in progress or paused. Migration direction outbound cannot be set at this time. Please retry after inbound migration is complete.
14869 16 No Must be DB OWNER to use the REMOTA_DATA_ARCHIVE_OVERRIDE hint.
14870 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside a user transaction.
14871 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside an implicit transaction.
14872 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted on INSERT statements.
14873 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted within a view definition.
14874 16 No Table '%.*ls' cannot be a target of an update or delete statement with a FROM clause because it has the REMOTE_DATA_ARCHIVE option enabled.
14875 16 No DML operation failed because it would have affected one or more migrated (or migration-eligible) rows.
14876 16 No Table '%.*ls' cannot be the target of an update or delete statement through a view because it has the REMOTE_DATA_ARCHIVE option enabled.
14877 16 No Not all rows needed to reconcile with the remote data are available locally for table '%ls'. Needed batch ID : %I64d, Available batch ID : %I64d.
14878 16 No The filter predicate cannot be set for table '%ls' together with inbound migration.
14879 16 No Cannot perform update or delete using hint %.*ls over table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
14880 16 No Unexpected exception occurred during remote column update.
14881 16 No Unable to update remote data archive: Error: %d, Severity: %d, State: %d.
14882 16 No Cannot use STAGE_ONLY hint since the staging environment for the table '%.*ls' has not been provisioned yet.
14883 16 No Stretch remote table creation failed without specific exception.
14884 16 No Unable to load the stretch filter predicate for table "%.*ls".
14885 16 No Cannot reconcile columns for %S_MSG '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the %S_MSG.
14886 16 No Cannot set the rpo duration for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14887 16 No Cannot run the procedure %.*ls for table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
14888 16 No Attempted inbound migration failed. Insert failed to insert all the rows. Expected rows : %d, Actual remote rows: %d.
14889 16 No Unable to process DML statement due to an unexpected operator in the migration predicate for table "%.*ls".
14890 16 No The maximum batch ID in the staging table cannot be greater than %I64d. Please perform the necessary delete/update operation using STAGE_ONLY hint to correct it.
14891 16 No Table '%.*ls' cannot be a target of an update or delete statement with an OUTPUT clause because it has the REMOTE_DATA_ARCHIVE option enabled.
14892 16 No Table '%.*ls' cannot be a target of an update or delete statement through a CURSOR because it has the REMOTE_DATA_ARCHIVE option enabled.
14893 16 No Table '%.*ls' cannot be a target of an update or delete statement because it has the REMOTE_DATA_ARCHIVE option enabled without a migration predicate.
14894 16 No Table '%.*ls' cannot be a target of an update or delete statement because it has both the REMOTE_DATA_ARCHIVE option enabled and a BLOCK PREDICATE enabled.
14895 16 No Cannot run the procedure %.*ls for table '%.*ls' since the max batch ID found in the stage table is different than the max batch ID found in the remote table. Please make sure that you run the same hinted admin query on both tables to bring them in sync.
14896 10 No Reconciliation proc %.*ls brought down the local batch ID for the stretch table '%.*ls' of database '%.*ls' from %I64d to %I64d.
14897 16 No Cannot run the procedure %.*ls for table '%.*ls' since it is not stretched.
14898 16 No Cannot run the procedure %.*ls in database '%.*ls' since it is not connected to a remote database.
14899 16 No Specified RPO Duration cannot be less than the minimum duration of %d
14901 10 No Running an admin %ls operation on stretched table with ID %d using %ls hint.
14903 16 No Cannot rename column '%ls'. Columns on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
14904 10 No Reauthorizing stretched database '%.*ls' with the remote database has completed successfully. Now reconciling remote tables and/or remote columns...
14905 10 No Reconciliation of remote tables and/or remote columns for stretched database '%.*ls' has completed successfully.
14906 16 No The database '%s' is not accessible. Ensure that the remote database exists. If you believe that your database should be accessible please retry the command.
14908 16 No Cannot set REMOTE_DATA_ARCHIVE to OFF from ON. To retrieve remote data and turn off remote data archive, set REMOTE_DATA_ARCHIVE (MIGRATION_STATE = INBOUND). To turn off REMOTE_DATA_ARCHIVE without retrieving remote data, set REMOTE_DATA_ARCHIVE = OFF_WITHOUT_DATA_RECOVERY.
14909 16 No Cannot currently use the REMOTE_DATA_ARCHIVE_OVERRIDE hint with table '%.*ls' because the remote table has not yet been created.
14910 16 No Cannot currently perform the requested operation against table '%.*ls' because it has the REMOTE_DATA_ARCHIVE option enabled but the remote table has not yet been created.
14911 10 No %.*ls is set to '%.*ls' on table '%.*ls'.
14912 10 No REMOTE_DATA_ARCHIVE with value set to OFF_WITHOUT_DATA_RECOVERY is not supported at table creation. Please retry using a valid option'.
14913 10 No Failure was injected by '%ls' transaction/function.
14914 16 No The edition for database '%ls' is invalid. Only the Azure SQL Stretch edition is supported as a target for Stretch database.
14915 16 No The use of replication is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
14916 16 No Change Data Capture is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
14917 16 No The REMOTE_DATA_ARCHIVE option cannot be enabled on table '%ls' because it will exceed the maximum allowable size of %d bytes on the remote table due to an additional required system column.
Error Severity Event logged Description
14002 16 No Could not find the 'Sync' subsystem with the task ID %ld.
14003 16 No You must supply a publication name.
14004 16 No %s must be in the current database.
14005 16 No Cannot drop the publication because at least one subscription exists for this publication. Drop all subscriptions to the publication before attempting to drop the publication. If the problem persists, replication metadata might be incorrect; consult Books Online for troubleshooting information.
14006 16 No Could not drop the publication.
14008 11 No There are no publications.
14009 11 No There are no articles for publication '%s'.
14010 16 No The remote server '%s' is not defined as a subscription server. Ensure you specify the server name rather than a network alias.
14011 16 No Unable to mark server '%s' as a non SQL Server subscriber.
14012 16 No The @status parameter value must be either 'active' or 'inactive'.
14013 16 No This database is not enabled for publication.
14014 16 No The synchronization method (@sync_method) must be '[bcp] native', '[bcp] character', 'concurrent', 'concurrent_c', 'database snapshot', or 'database snapshot character'.
14015 16 No The replication frequency (@repl_freq) must be either 'continuous' or 'snapshot'.
14016 16 No The publication '%s' already exists.
14017 16 No Invalid @restricted parameter value. Valid options are 'true' or 'false'.
14018 16 No Could not create the publication.
14019 16 No The @operation parameter value must be either add, drop, or alter.
14020 16 No Could not obtain the column ID for the specified column. Schema replication failed.
14021 16 No The column was not added correctly to the article.
14022 16 No The @property parameter value must be either 'description', 'sync_object', 'type', 'ins_cmd', 'del_cmd', 'upd_cmd', 'filter', 'dest_table', 'dest_object', 'creation_script', 'pre_creation_cmd', 'status', 'schema_option', or 'destination_owner'.
14023 16 No The type must be '[indexed view ]logbased[ (manualview|manualfilter|manualboth)]', '[serializable ]proc exec', or '(view|indexed view|proc|func|aggregate|synonym) schema only'.
14024 16 No The value of property 'subscriber_provider' cannot be NULL.
14025 10 No Article update successful.
14026 16 No The value of property 'subscriber_type is not a supported heterogeneous subscriber type. The value must be 1 (ODBC subscriber), or 3 (OLEDB subscriber).
14027 11 No %s does not exist in the current database.
14028 16 No Only user tables, materialized views, and stored procedures can be published as 'logbased' articles.
14029 16 No The vertical partition switch must be either 'true' or 'false'.
14030 16 No The article '%s' exists in publication '%s'.
14031 16 No User tables and views are the only valid synchronization objects.
14032 16 No The value of parameter %s cannot be 'all'. It is reserved by replication stored procedures.
14033 16 No Could not change replication frequency because there are active subscriptions on the publication.
14034 16 No The publication name (@publication) cannot be the keyword 'all'.
14035 16 No The replication option '%s' of database '%s' has already been set to true.
14036 16 No Could not enable database for publishing.
14037 16 No The replication option '%s' of database '%s' has been set to false.
14038 16 No Could not disable database for publishing.
14039 16 No Could not construct column clause for article view. Reduce the number of columns or create the view manually.
14040 16 No The server '%s' is already a Subscriber.
14041 16 No The '%s' property can only be changed if the publication is enabled for heterogeneous subscriptions. The publication is not enabled.
14042 16 No Could not create Subscriber.
14043 16 No The parameter %s passed to stored procedure %s cannot be NULL.
14044 16 No Unable to clear subscriber status for the server.
14045 16 No Unable to update subscriber_type in MSdistribution_agents table.
14046 16 No Could not drop article. A subscription exists on it.
14047 16 No Could not drop %s.
14048 16 No The server '%s' is not a Subscriber.
14049 16 No Stored procedures for replication are the only objects that can be used as a filter.
14050 11 No No subscription is on this publication or article.
14051 16 No The parameter value must be 'sync_type' or 'dest_db'.
14052 16 No The @sync_type parameter value must be "automatic", "none", "replication support only", "initialize with backup", or "initialize from lsn".
14053 16 No The subscription could not be updated at this time.
14054 10 No The subscription was updated successfully.
14055 10 No The subscription does not exist.
14056 16 No The subscription could not be dropped at this time.
14057 16 No The subscription could not be created.
14058 16 No Cannot create the subscription because the subscription already exists in the subscription database. Only one subscription to the same publication is allowed in each subscription database. Drop the subscription and add it again if necessary. If the problem persists, replication metadata might be incorrect; see Books Online for troubleshooting information.
14059 16 No Materialized view articles cannot be created for publications with the properties allow_sync_tran, allow_queued_tran, or allow_dts.
14060 16 No Subscriber parameters specifying provider properties must be NULL for SQL Server subscribers.
14061 16 No The @pre_creation_cmd parameter value must be 'none', 'drop', 'delete', or 'truncate'.
14062 10 No The Subscriber was dropped.
14063 11 No The remote server does not exist or has not been designated as a valid Subscriber.
14064 10 No Found generation stuck at genstatus 4.
14065 16 No The @status parameter value must be 'initiated', 'active', 'inactive', or 'subscribed'.
14066 16 No The previous status must be 'active', 'inactive', or 'subscribed'.
14067 16 No The status value is the same as the previous status value.
14068 16 No The subscription status of the object could not be changed.
14069 16 No Could not update sysarticles. The subscription status could not be changed.
14070 16 No Could not update the distribution database subscription table. The subscription status could not be changed.
14071 16 No Could not find the Distributor or the distribution database for the local server. The Distributor may not be installed, or the local server may not be configured as a Publisher at the Distributor.
14074 16 No The server '%s' is already listed as a Publisher.
14075 16 No The Publisher could not be created at this time.
14076 16 No Could not grant replication login permission to '%s'.
14077 10 No The publication was updated successfully.
14078 16 No The parameter must be 'description', 'taskid', 'sync_method', 'status', 'repl_freq', 'restricted', 'retention', 'immediate_sync', 'enabled_for_internet', 'allow_push', 'allow_pull', 'allow_anonymous', or 'retention'.
14080 16 No The remote server "%s" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
14085 16 No The Subscriber information could not be obtained from the Distributor.
14088 16 No The table '%s' must have a primary key to be published using the transaction-based method.
14089 16 No The clustered index on materialized view '%s' may not contain nullable columns if it is to be published using the transaction-based method.
14090 16 No Error evaluating article synchronization object after column drop. The filter clause for article '%s' must not reference the dropped column.
14091 16 No The @type parameter passed to sp_helpreplicationdb must be either 'pub' or 'sub'.
14092 16 No Could not change article because there is an existing subscription to the article.
14093 16 No Cannot grant or revoke access directly on publication '%s' because it uses the default publication access list.
14094 16 No Could not subscribe to article '%s' because heterogeneous Subscriber '%s' does not support the @pre_creation_cmd parameter value 'truncate'.
14095 16 No The value for the @sync_method parameter is not valid. Could not subscribe to publication '%s' because non-SQL Server Subscriber '%s' only supports values of 'character', 'bcp character', 'concurrent_c', and 'database snapshot character' for the @sync_method parameter.
14096 16 No The path and name of the table creation script must be specified if the @pre_creation_cmd parameter value is 'drop'.
14097 16 No The 'status' value must be 'no column names', 'include column names', 'string literals', 'parameters', 'DTS horizontal partitions' or 'no DTS horizontal partitions'.
14098 16 No Cannot drop Distribution Publisher '%s'. The remote Publisher is using '%s' as Distributor. Disable publishing at the Publisher before attempting to drop this relationship.
14099 16 No The server '%s' is already defined as a Distributor. To reconfigure the server as a Distributor, you must first uninstall the exisiting Distributor. Use the stored procedure sp_dropdistributor, or use the Disable Publishing and Distribution Wizard.
14100 16 No Specify all articles when subscribing to a publication using concurrent snapshot processing.
14101 16 No The publication '%s' already has a Snapshot Agent defined.
14102 16 No Specify all articles when unsubscribing from a publication using concurrent snapshot processing.
14103 16 No Invalid "%s" value. Valid values are "publisher", "subscriber", or "both".
14105 10 No You have updated the distribution database property '%s' successfully.
14106 16 No Distribution retention periods must be greater than or equal to 0.
14107 10 No The @max_distretention value must be larger than the @min_distretention value.
14108 10 No Removed %ld history records from %s.
14109 10 No The @security_mode parameter value must be 0 (SQL Server Authentication) or 1 (Integrated Authentication).
14110 16 No For stored procedure articles, the @property parameter value must be 'description', 'dest_table', 'dest_object', 'creation_script', 'pre_creation_cmd', 'schema_option', or 'destination_owner'.
14111 16 No The @pre_creation_cmd parameter value must be 'none' or 'drop'.
14112 16 No This procedure can be executed only against table-based articles.
14113 16 No Could not execute '%s'. Check '%s' in the install directory.
14114 16 No The server '%s' is not configured as a Distributor.
14115 16 No The property parameter value must be %s.
14117 16 No '%s' is not configured as a distribution database.
14118 16 No A stored procedure can be published only as a 'serializable proc exec' article, a 'proc exec' article, or a 'proc schema only' article.
14119 16 No Could not add the distribution database '%s'. This distribution database already exists.
14120 16 No Could not drop the distribution database '%s'. This distributor database is associated with a Publisher.
14121 16 No Could not drop the Distributor '%s'. This Distributor has associated distribution databases.
14122 16 No The @article parameter value must be 'all' for immediate_sync publications.
14123 16 No The subscription @sync_type parameter value 'manual' is no longer supported.
14124 16 No A publication must have at least one article before a subscription to it can be created.
14126 16 No You do not have the required permissions to complete the operation.
14128 16 No Invalid @subscription_type parameter value. Valid options are 'push' or 'pull'.
14129 16 No The @status parameter value must be NULL for 'automatic' sync_type when you add subscriptions to an immediate_sync publication.
14135 16 No There is no subscription on Publisher '%s', publisher database '%s', publication '%s'.
14136 16 No The keyword 'all' is reserved by replication stored procedures.
14137 16 No The @value parameter value must be either 'true' or 'false'.
14138 16 No Invalid option name '%s'.
14139 16 No The replication system table '%s' already exists.
14143 16 No Cannot drop Distributor Publisher '%s'. There are Subscribers associated with it in the distribution database '%s'.
14144 16 No Cannot drop Subscriber '%s'. There are subscriptions for it in the publication database '%s'.
14146 16 No The article parameter '@schema_option' cannot be NULL.
14147 16 No Restricted publications are no longer supported.
14148 16 No Invalid '%s' value. Valid values are 'true' or 'false'.
14149 10 No Removed %ld replication history records in %s seconds (%ld row/secs).
14150 10 No Replication-%s: agent %s succeeded. %s
14151 18 Yes Replication-%s: agent %s failed. %s
14152 10 Yes Replication-%s: agent %s scheduled for retry. %s
14153 10 No Replication-%s: agent %s warning. %s
14154 16 No The Distributor parameter must be '@heartbeat_interval'.
14155 16 No Invalid article ID specified for procedure script generation.
14156 16 No The custom stored procedure calling the format for the %s command specified in the article definition does not match the %s format.
14157 10 Yes The subscription created by Subscriber '%s' to publication '%s' has expired and has been dropped.
14158 10 No Replication-%s: agent %s: %s.
14159 16 No Could not change property '%s' for article '%s' because there is an existing subscription to the article.
14160 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and change the expiration threshold value if necessary.
14161 10 Yes The threshold [%s:%s] for the publication [%s] has been set. Make sure that the logreader and distribution agents are running and can match the latency requirement.
14162 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14163 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14164 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14165 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14166 10 No Disable publishing ignored error msg %d, severity %d, state %d: %s.
14167 10 No Subscription expiration
14168 10 No Transactional replication latency
14169 10 No Long merge over dialup connection
14170 10 No Long merge over LAN connection
14171 10 No Slow merge over LAN connection
14172 10 No Slow merge over dialup connection
14173 18 Yes Replication-%s: agent initialization failed. %s
14196 10 No The agent has never been run.
14197 10 No Value of %s parameter should be in the set %s
14198 10 No The value of the %s parameter should be in the range %s. Verify that the specified parameter value is correct.
14199 10 No The specified job '%s' is not created for maintenance plans. Verify that the job has at least one step calling xp_sqlmaint.
14200 16 No The specified '%s' is invalid.
14201 10 No 0 (all steps) ..
14202 10 No before or after @active_start_time
14203 10 No sp_helplogins [excluding Windows NT groups]
14204 10 No 0 (non-idle), 1 (executing), 2 (waiting for thread), 3 (between retries), 4 (idle), 5 (suspended), 7 (performing completion actions)
14205 10 No (unknown)
14206 10 No 0..n seconds
14207 10 No -1 [no maximum], 0..n
14208 10 No 1..7 [1 = E-mail, 2 = Pager, 4 = NetSend]
14209 10 No 0..127 [1 = Sunday .. 64 = Saturday]
14210 10 No notification
14211 10 No server
14212 10 No (all jobs)
14213 10 No Core Job Details:
14214 10 No Job Steps:
14215 10 No Job Schedules:
14216 10 No Job Target Servers:
14217 10 No SQL Server Warning: '%s' has performed a forced defection of TSX server '%s'. Run sp_delete_targetserver at the MSX in order to complete the defection.
14218 10 No hour
14219 10 No minute
14220 10 No second
14221 16 No This job has one or more notifications to operators other than '%s'. The job cannot be targeted at remote servers as currently defined.
14222 16 No Cannot rename the '%s' operator.
14223 16 No Cannot modify or delete operator '%s' while this server is a %s.
14224 10 No Warning: The server name given is not the current MSX server ('%s').
14225 16 No Warning: Could not determine local machine name. This prevents MSX operations from being posted.
14226 10 No %ld history entries purged.
14227 10 No Server defected from MSX '%s'. %ld job(s) deleted.
14228 10 No Server MSX enlistment changed from '%s' to '%s'.
14229 10 No Server enlisted into MSX '%s'.
14230 10 No SP_POST_MSX_OPERATION: %ld %s download instruction(s) posted.
14231 10 No SP_POST_MSX_OPERATION Warning: The specified %s ('%s') is not involved in a multiserver job.
14232 16 No Specify either a job_name, job_id, or an originating_server.
14233 16 No Specify a valid job_id (or 0x00 for all jobs).
14234 16 No The specified '%s' is invalid (valid values are returned by %s).
14235 16 No The specified '%s' is invalid (valid values are greater than 0 but excluding %ld).
14236 10 No Warning: Non-existent step referenced by %s.
14237 16 No When an action of 'REASSIGN' is specified, the New Login parameter must also be supplied.
14238 10 No %ld jobs deleted.
14239 10 No %ld jobs reassigned to %s.
14240 10 No Job applied to %ld new servers.
14241 10 No Job removed from %ld servers.
14242 16 No Only a system administrator can reassign ownership of a job.
14243 10 No Job '%s' started successfully.
14245 16 No Specify either the @name, @id, or @loginname of the task(s) to be deleted.
14250 16 No The specified %s is too long. It must contain no more than %ld characters.
14251 16 No Cannot specify '%s' as the operator to be notified.
14252 16 No Cannot perform this action on a job you do not own.
14253 10 No %ld (of %ld) job(s) stopped successfully.
14254 10 No Job '%s' stopped successfully.
14255 16 No The owner ('%s') of this job is either an invalid login, or is not a valid user of database '%s'.
14256 16 No Cannot start the job "%s" (ID %s) because it does not have any job server or servers defined. Associate the job with a job server by calling sp_add_jobserver.
14257 16 No Cannot stop the job "%s" (ID %s) because it does not have any job server or servers defined. Associate the job with a job server by calling sp_add_jobserver.
14258 16 No Cannot perform this operation while SQLServerAgent is starting. Try again later.
14260 16 No You do not have sufficient permission to run this command. Contact your system administrator.
14261 16 No The specified %s ('%s') already exists.
14262 16 No The specified %s ('%s') does not exist.
14263 16 No Target server '%s' is already a member of group '%s'.
14264 16 No Target server '%s' is not a member of group '%s'.
14265 24 Yes The MSSQLServer service terminated unexpectedly. Check the SQL Server error log and operating system error logs for possible causes.
14266 16 No The specified '%s' is invalid (valid values are: %s).
14267 16 No Cannot add a job to the '%s' job category.
14268 16 No There are no jobs at this server that originated from server '%s'.
14269 16 No Job '%s' is already targeted at server '%s'.
14270 16 No Job '%s' is not currently targeted at server '%s'.
14271 16 No A target server cannot be named '%s'.
14272 16 No Object-type and object-name must be supplied as a pair.
14273 16 No You must provide either @job_id or @job_name (and, optionally, @schedule_name), or @schedule_id.
14274 16 No Cannot add, update, or delete a job (or its steps or schedules) that originated from an MSX server.
14275 16 No The originating server must be either local server or MSX server.
14276 16 No '%s' is a permanent %s category and cannot be deleted.
14277 16 No The command script does not destroy all the objects that it creates. Revise the command script.
14278 16 No The schedule for this job is invalid (reason: %s).
14279 16 No Supply either @job_name, @job_id or @originating_server.
14280 16 No Supply either a job name (and job aspect), or one or more job filter parameters.
14281 10 No Warning: The @new_owner_login_name parameter is not necessary when specifying a 'DELETE' action.
14282 16 No Supply either a date (created or last modified) and a data comparator, or no date parameters at all.
14283 16 No Supply @target_server_groups or @target_servers, or both.
14284 16 No Cannot specify a job ID for a new job. An ID will be assigned by the procedure.
14285 16 No Cannot add a local job to a multiserver job category.
14286 16 No Cannot add a multiserver job to a local job category.
14287 16 No The '%s' supplied has an invalid %s.
14288 16 No %s cannot be before %s.
14289 16 No %s cannot contain '%s' characters.
14290 16 No This job is currently targeted at the local server so cannot also be targeted at a remote server.
14291 16 No This job is currently targeted at a remote server so cannot also be targeted at the local server.
14292 16 No There are two or more tasks named '%s'. Specify %s instead of %s to uniquely identify the task.
14293 16 No There are two or more jobs named '%s'. Specify %s instead of %s to uniquely identify the job.
14294 16 No Supply either %s or %s to identify the job.
14295 16 No Frequency Type 0x2 (OnDemand) is no longer supported.
14296 16 No This server is already enlisted into MSX '%s'.
14297 16 No Cannot enlist into the local machine.
14298 16 No This server is not currently enlisted into an MSX.
14299 16 No Server '%s' is an MSX. Cannot enlist one MSX into another MSX.
14301 16 No Logins other than the current user can only be seen by members of the sysadmin role.
14305 16 No Column '%.*ls' does not exist in table '%.*ls'.
14306 16 No The target server (TSX) version is not compatible with the master server (MSX) version (%ld.%ld.%ld).
14307 16 No Access to Integration Services package '%s' is denied.
14350 16 No Cannot initialize COM library because CoInitialize failed.
14351 16 No Cannot complete this operation because an unexpected error occurred.
14353 16 No Cannot determine the service account for this SQL Server instance.
14357 16 No Cannot list '%s' in Active Directory because the name is too long. Active Directory common names cannot exceed 64 characters.
14360 16 No %s is already configured as TSX machine
14362 16 No The MSX server must be running the Standard or Enterprise edition of SQL Server
14363 16 No The MSX server is not prepared for enlistments [there must be an operator named 'MSXOperator' defined at the MSX]
14364 16 No The TSX server is not currently enlisted
14365 16 No Specify a valid schedule_uid.
14366 16 No Only members of sysadmin role can modify the owner of a schedule.
14367 16 No One or more schedules were not deleted because they are being used by at least one other job. Use "sp_detach_schedule" to remove schedules from a job.
14368 16 No Schedule "%s" was not deleted because it is being used by at least one other job. Use "sp_detach_schedule" to remove schedules from a job.
14369 16 No The schedule ID "%s" is used by more than one job. Specify the job_id.
14370 16 No The @originating_server must be either the local server name or the master server (MSX) name for MSX jobs on a target server (TSX).
14371 16 No There are two or more schedules named "%s". Specify %s instead of %s to uniquely identify the schedule.
14372 16 No The schedule was not deleted because it is being used by one or more jobs.
14373 16 No Supply either %s or %s to identify the schedule.
14374 16 No The specified schedule name "%s" is not associated with the job "%s".
14375 16 No More than one schedule named "%s" is attached to job "%s". Use "sp_update_schedule" to update schedules.
14376 16 No More than one schedule named "%s" is attached to job "%s". Use "sp_detach_schedule" to remove schedules from a job.
14377 16 No The schedule was not attached to the specified job. The caller must own the job or the operation must be performed by a sysadmin.
14378 16 No @sysadmin_only flag is no longer supported by SQLAgent and kept here only for backwards compatibility
14379 16 No Table '%s' foreign key 'originating_server_id' does not have a matching value in the referenced view 'dbo.sysoriginatingservers_view'.
14380 16 No Field 'originating_server_id' in table sysoriginatingservers is being referenced by either sysjobs or sysschedules.
14390 16 No Only members of role sysadmin can specify the %s parameter.
14391 16 No Only owner of a job or members of sysadmin role can detach a schedule.
14392 16 No Only owner of a job or members of role sysadmin or SQLAgentOperatorRole can purge history of the job.
14393 16 No Only owner of a job or members of role sysadmin or SQLAgentOperatorRole can start and stop the job.
14394 16 No Only owner of a job schedule or members of sysadmin role can modify or delete the job schedule.
14395 16 No '%s' is a member of sysadmin server role and cannot be granted to or revoked from the proxy. Members of sysadmin server role are allowed to use any proxy.
14396 16 No Only members of sysadmin server role can modify multi-server jobs
14397 16 No Only members of sysadmin server role can start/stop multi-server jobs
14398 16 No Only members of sysadmin server role can create multi-server jobs
14399 16 No Current proxy_id %d and new proxy_id %d cannot be the same.
14400 16 No Proxy %d does not have access to subsystem %d. Please use sp_grant_proxy_to_subsystem to grant permissions to this proxy.
14410 16 No You must supply either a plan_name or a plan_id.
14411 16 No Cannot delete this plan. The plan contains enlisted databases.
14412 16 No The destination database is already part of a log shipping plan.
14413 16 No This database is already log shipping.
14414 16 No A log shipping monitor is already defined.
14415 16 No The user name cannot be null when using SQL Server authentication.
14416 16 No This stored procedure must be run in msdb.
14417 16 No Cannot delete the monitor server while databases are participating in log shipping.
14418 16 No The specified @backup_file_name was not created from database '%s'.
14419 16 No The specified @backup_file_name is not a database backup.
14420 16 Yes The log shipping primary database %s.%s has backup threshold of %d minutes and has not performed a backup log operation for %d minutes. Check agent log and logshipping monitor information.
14421 16 Yes The log shipping secondary database %s.%s has restore threshold of %d minutes and is out of sync. No restore was performed for %d minutes. Restored latency is %d minutes. Check agent log and logshipping monitor information.
14422 16 No Supply either @plan_id or @plan_name.
14423 16 No Other databases are enlisted on this plan and must be removed before the plan can be deleted.
14424 16 No The database '%s' is already involved in log shipping.
14425 16 No The database '%s' does not seem to be involved in log shipping.
14426 16 No A log shipping monitor is already defined. Call sp_define_log_shipping_monitor with @delete_existing = 1.
14427 16 No A user name is necessary for SQL Server security.
14428 16 No Could not remove the monitor as there are still databases involved in log shipping.
14429 16 No There are still secondary servers attached to this primary.
14430 16 No Destination path %s is not valid. Unable to list directory contents. Specify a valid destination path.
14440 16 No Could not set single user mode.
14441 16 No Role change succeeded.
14442 16 No Role change failed.
14450 16 No The specified @backup_file_name was not taken from database '%s'.
14451 16 No The specified @backup_file_name is not a database backup.
14500 16 No Supply either a non-zero message ID, non-zero severity, non-null performance condition, or non-null WMI namespace and query.
14501 16 No An alert ('%s') has already been defined on this condition.
14502 16 No The @target_name parameter must be supplied when specifying an @enum_type of 'TARGET'.
14503 16 No The @target_name parameter should not be supplied when specifying an @enum_type of 'ALL' or 'ACTUAL'.
14504 16 No '%s' is the fail-safe operator. You must make another operator the fail-safe operator before '%s' can be dropped.
14505 16 No Specify a null %s when supplying a performance condition.
14506 16 No Cannot set alerts on message ID %ld.
14507 16 No A performance condition must be formatted as: 'object_name|counter_name|instance_name|comparator(> or < or =)|numeric value'.
14508 16 No Specify both @wmi_namespace and @wmi_query.
14509 16 No Specify a valid %s when supplying a @wmi_namespace.
14510 16 No Specify a null %s when supplying a @wmi_namespace.
14511 16 No The @wmi_query could not be executed in the @wmi_namespace provided. Verify that an event class selected in the query exists in the namespace and that the query has the correct syntax.
14512 16 No Specify a valid %s when supplying a @wmi_query.
14513 10 No Analysis query subsystem
14514 10 No Analysis command subsystem
14515 16 No Only a member of the sysadmin server role can add a job for a different owner with @owner_login_name.
14516 16 No Proxy (%d) is not allowed for subsystem "%s" and user "%s". Grant permission by calling sp_grant_proxy_to_subsystem or sp_grant_login_to_proxy.
14517 16 No A proxy account is not allowed for a Transact-SQL subsystem.
14518 16 No Cannot delete proxy (%d). It is used by at least one jobstep. Change this proxy for all jobsteps by calling sp_reassign_proxy.
14519 16 No Only one of @login_name, @fixed_server_role, or @msdb_role should be specified.
14520 16 No "%s" is not a valid SQL Server standard login, Windows NT user, Windows NT group, or msdb database role.
14521 16 No "%s" is not a valid SQL Server fixed server role, Windows NT user, or Windows NT group.
14522 16 No '"%s" is not a valid role of an msdb database, Windows NT user, or Windows NT group.
14523 16 No "%s" has not been granted permission to use proxy "%s".
14524 16 No Supply either %s or %s.
14525 16 No Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
14526 16 No The specified category "%s" does not exist for category class "%s".
14527 16 No Job "%s" cannot be used by an alert. It should first be associated with a server by calling sp_add_jobserver.
14528 16 No Job "%s" has no steps defined.
14529 16 No Proxy "%s" is not a valid Windows user.
14530 16 No The Transact-SQL subsystem cannot be executed under the context of a proxy account.
14531 16 No Permission to access proxy already granted. Verify current permissions assignments.
14532 16 No Supply both %s and %s, or none of them.
14533 16 No Use either a proxy or user_domain, user_name, or user_password parameter.
14534 16 No All user_domain, user_name, and user_password parameters should be defined.
14535 16 No The user_domain, user_name, and user_password parameters can be specified only for replication subsystems.
14536 16 No Only members of the sysadmin role can specify a "%s" parameter.
14537 16 No Execution in the context of disabled proxy (proxy_id = %d) is not allowed. Contact your system administrator.
14538 10 No SSIS package execution subsystem
14539 16 No Only a Standard or Enterprise edition of SQL Server can be enlisted into an MSX.
14540 16 No Only a SQL Server running on Microsoft Windows NT can be enlisted into an MSX.
14541 16 No The version of the MSX (%s) is not recent enough to support this TSX. Version %s or later is required at the MSX.
14542 16 No It is invalid for any TSQL step of a multiserver job to have a non-null %s value.
14543 16 No Login '%s' owns one or more multiserver jobs. Ownership of these jobs can only be assigned to members of the %s role.
14544 16 No This job is owned by '%s'. Only a job owned by a member of the %s role can be a multiserver job.
14545 16 No The %s parameter is not valid for a job step of type '%s'.
14546 16 No The %s parameter is not supported on Windows 95/98 platforms.
14547 10 No Warning: This change will not be downloaded by the target server(s) until an %s for the job is posted using %s.
14548 10 No Target server '%s' does not have any jobs assigned to it.
14549 10 No (Description not requested.)
14550 10 No Command-Line Subsystem
14551 10 No Replication Snapshot Subsystem
14552 10 No Replication Transaction-Log Reader Subsystem
14553 10 No Replication Distribution Subsystem
14554 10 No Replication Merge Subsystem
14555 10 No Active Scripting Subsystem
14556 10 No Transact-SQL Subsystem
14557 10 No [Internal]
14558 10 No (encrypted command)
14559 10 No (append output file)
14560 10 No (include results in history)
14561 10 No (normal)
14562 10 No (quit with success)
14563 10 No (quit with failure)
14564 10 No (goto next step)
14565 10 No (goto step)
14566 10 No (idle)
14567 10 No (below normal)
14568 10 No (above normal)
14569 10 No (time critical)
14570 10 No (Job outcome)
14571 10 No No description available.
14572 10 No @freq_interval must be at least 1 for a daily job.
14573 10 No @freq_interval must be a valid day of the week bitmask [Sunday = 1 .. Saturday = 64] for a weekly job.
14574 10 No @freq_interval must be between 1 and 31 for a monthly job.
14575 10 No @freq_relative_interval must be one of 1st (0x1), 2nd (0x2), 3rd [0x4], 4th (0x8) or Last (0x10).
14576 10 No @freq_interval must be between 1 and 10 (1 = Sunday .. 7 = Saturday, 8 = Day, 9 = Weekday, 10 = Weekend-day) for a monthly-relative job.
14577 10 No @freq_recurrence_factor must be at least 1.
14578 10 No Starts whenever the CPU usage has remained below %ld percent for %ld seconds.
14579 10 No Automatically starts when SQLServerAgent starts.
14580 10 No job
14581 10 No Replication Transaction Queue Reader Subsystem
14582 16 No Only a sysadmin can specify '@output_file_name' parameter for a jobstep.
14583 16 No Only a sysadmin can specify '@database_user_name' parameter.
14585 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may reassign its ownership.
14586 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may create new versions of it.
14587 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may drop it or any of its versions.
14588 10 No ID.VersionID =
14589 10 No [not specified]
14590 16 No DTS Package '%s' already exists with a different ID in this category.
14591 16 No SSIS folder '%s' already exists in the specified parent folder.
14592 16 No DTS Category '%s' was found in multiple parent categories. You must uniquely specify the category to be dropped.
14593 16 No SSIS folder '%s' contains packages and/or other folders. You must drop these first.
14594 10 No DTS Package
14595 16 No DTS Package '%s' exists in different categories. You must uniquely specify the package.
14596 16 No DTS Package '%s' exists in another category.
14597 16 No DTS Package ID '%s' already exists with a different name.
14598 16 No Cannot drop the Local, Repository, or LocalDefault DTS categories.
14599 10 No Name
14600 16 No Proxy "%s" has not been granted permission to use subsystem "%s".
14601 16 No Operator "%s" is not enabled and therefore cannot receive notifications.
14602 16 No Operator "%s" does not have an e-mail address specified.
14603 16 No Database Mail is not properly configured.
14604 16 No Both %s parameters (id and name) cannot be NULL
14605 16 No Both %s parameters (id and name) do not point to the same object
14606 16 No %s id is not valid
14607 16 No %s name is not valid
14608 16 No Either %s or %s parameter needs to be supplied
14609 16 No Mail database to user database association does not exist and therefore cannot be updated
14610 16 No Either @profile_name or @description parameter needs to be specified for update
14611 16 No Account sequence number must be supplied for update
14612 16 No Each principal should have at least one default profile
14613 16 No The specified '%s' cannot use commas (,) to separate addresses: '%s'. To continue, use semicolons (;) to separate addresses.
14614 16 No %s is not a valid mailserver_type
14615 16 No The @username parameter needs to be supplied if the @password is supplied.
14616 16 No Unable to retrieve the newly created credential [%s] from the credential store.
14617 16 No Mail host database specified is invalid
14618 16 No Parameter '%s' must be specified. This parameter cannot be NULL.
14619 16 No Received an error on the Service Broker conversation with Database Mail. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for information.
14620 16 No The Service Broker conversation to Database Mail ended without a response from Database Mail. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for more information.
14621 16 No Parameter @attachmentencoding does not support the value "%s". The attachment encoding must be "MIME".
14622 16 No Parameter @importance does not support the value "%s". Mail importance must be one of LOW, NORMAL, or HIGH.
14623 16 No Parameter @sensitivity does not support the value "%s". Mail sensitivity must be one of NORMAL, PERSONAL, PRIVATE, or CONFIDENTIAL.
14624 16 No At least one of the following parameters must be specified. "%s".
14625 16 No Parameter @attach_query_result_as_file cannot be 1 (true) when no value is specified for parameter @query. A query must be specified to attach the results of the query.
14626 16 No Parameter @mailformat does not support the value "%s". The mail format must be TEXT or HTML.
14627 16 No Received error %d while sending a message as part of the %s operation. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for more information.
14628 16 No The format of the parameter @attachments is incorrect. The file names must be separated by a semicolon ";".
14629 16 No There is no configuration parameter named "%s", or the value provided is not of the correct data type.
14630 16 No Database Mail is not permitted to send files with the file extension %s.
14631 16 No The current user ('%s') either does not have permission to access the database specified in the parameter @execute_query_database or cannot impersonate the user specified in the parameter @execute_query_as. Only members of the sysadmin fixed server role and members of the db_owner fixed database role can impersonate another user.
14632 16 No The user name %s specified in @execute_query_as is invalid. There is no user by that name.
14633 16 No The database name "%s" specified in @execute_query_database is invalid. There is no database by that name.
14634 10 No Warning: %s'
14635 10 No Mail (Id: %d) queued.
14636 16 No No global profile is configured. Specify a profile name in the @profile_name parameter.
14637 10 No Activation failure.
14638 10 No Activation successful.
14639 10 No The mail queue was started by login "%s".
14640 10 No The mail queue stopped by login "%s".
14641 16 No Mail not queued. Database Mail is stopped. Use sysmail_start_sp to start Database Mail.
14642 10 No Default attachment encoding
14643 10 No Default dialog lifetime
14644 10 No Default maximum file size
14645 10 No Extensions not allowed in outgoing mails
14646 10 No Number of retry attempts for a mail server
14647 10 No Delay between each retry attempt to mail server
14648 10 No Minimum process lifetime in seconds
14649 16 No Unable to test profile. Database Mail is stopped. Use sysmail_start_sp to start Database Mail.
14650 16 No Service Broker message delivery is not enabled in this database. Use the ALTER DATABASE statement to enable Service Broker message delivery.
14651 16 No Unable to test profile. Service Broker message delivery is not enabled in this database. Use the ALTER DATABASE statement to enable Service Broker message delivery.
14652 16 No Invalid message received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14653 16 No Invalid %s value received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14654 10 No Unexpected message received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14655 16 No Invalid XML message format received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14657 16 No Mail not queued. Maximum number of mails per day (%ld) for login %s has been exceeded.
14658 16 No Failed to retrieve SQLPath for syssubsystems population.
14659 16 No Failed to retrieve VerSpecificRootDir for syssubsystems population.
14660 16 No Database Compatibility Level is too low. Compatibility Level must be Version80 or higher.
14661 16 No Query execution failed: %s
14662 10 No mailitem_id on conversation %s was not found in the sysmail_send_retries table. This mail item will not be sent.
14663 10 No Mail Id %d has exceeded the retry count. This mail item will not be sent.
14664 16 No Database Mail logging level: normal - 1, extended - 2 (default), verbose - 3
14665 10 No Mail items deletion is initiated by user "%s". %d items deleted.
14666 16 No User name cannot be supplied when using default credentials
14667 16 No Mail Id %d has been deleted from sysmail_mailitems table. This mail will not be sent.
14668 16 No Deleting profile %s failed because there are some unsent emails associated with this profile, use force_delete option to force the deletion of the profile.
14670 16 No Cannot delete the active collection set '%s'. Stop the collection set and then try to delete it again.
14671 16 No Cannot update the name or the parameters of the collection item '%s' in the active collection set '%s'. Stop the collection set and then try to update the collection item again.
14672 16 No Cannot delete the collection item '%s' in the active collection set '%s'. Stop the collection set and then try to delete the collection item again.
14673 16 No Cannot delete the collector type '%s'. Delete all collection items associated with this collector type and then try to delete it again.
14674 16 No Cannot upload data for the inactive collection set '%s'. Start the collection set and then try to upload the data again.
14675 16 No Cannot update the name, target, proxy_id, logging_level, or collection_mode, or add collection item to the active collection set '%s'. Stop the collection set and then try to update it again.
14676 16 No The user does not have permission to change '%s'. The user must be a member of data collector role '%s'.
14677 16 No The user does not have permission to perform this operation. The user must be a member of data collector role '%s'.
14678 16 No SQL Server Trace with id %d has been stopped and closed by external user. SQL Server Trace collector will attempt to re-create the trace.
14679 16 No The specified %s (%s) is not valid in this data warehouse.
14680 16 No Management Data Warehouse database can only be installed on an instance of SQL Server 2008 or higher.
14681 16 No Cannot perform this procedure when the collector is disabled. Enable the collector and then try again.
14682 16 No The state of the collection set has changed, but it will not start or stop until the collector is enabled.
14683 16 No A collection set in cached mode requires a schedule.
14684 16 No Caught error#: %d, Level: %d, State: %d, in Procedure: %s, Line: %d, with Message: %s
14685 16 No Collection set: '%s' does not contain any collection items, so starting the collection set will have no effect.
14686 16 No The MDWInstance and MDWDatabase parameters of the configuration store cannot be null.
14687 16 No Invalid value (%d) of the @cache_window parameter. Allowable values are: -1 (cache all upload data from previous upload failures), 0 (cache no upload data), N (cache data from N previous upload failures, where N >= 1)
14688 16 No A collection set cannot start when SQL Server Agent is stopped. Start SQL Server Agent.
14689 16 No A collection set cannot start if the management data warehouse is not configured. Run the instmdw.sql script to create and configure the management data warehouse.
14690 16 No Cannot perform this procedure when the collector is enabled. Disable the collector and then try again.
14691 16 No The status of the collector cannot be null. This may indicate an internal corruption in the collector configuration data.
14692 16 No Insufficient priveleges to start collection set: '%s'. Only a member of the 'sysadmin' fixed server role can start a collection set without a SQL Server Agent proxy. Attach a SQL Server Agent proxy to the collection set before retrying.
14693 16 No A collection set cannot start without a schedule. Specify a schedule for the collection set.
14694 16 No Cannot upload data on-demand for the collection set '%s' in non-cached mode.
14695 16 No Cannot collect data on-demand for the collection set '%s' in cached mode.
14696 16 No Cannot update or delete a system collection set, or add new collection items to it.
14697 16 No Unable to convert showplan to XML. Error #%d on Line %d: %s
14698 10 No PowerShell Subsystem
14699 16 No Data Collector cannot be enabled when SQL Server Agent is stopped. Start SQL Server Agent.
14700 10 No Collects data about the disk and log usage for all databases.
14701 10 No Disk Usage
14702 10 No Disk Usage - Data Files
14703 10 No Disk Usage - Log Files
14704 10 No Collects top-level performance indicators for the computer and the Database Engine. Enables analysis of resource use, resource bottlenecks, and Database Engine activity.
14705 10 No Server Activity
14706 10 No Server Activity - DMV Snapshots
14707 10 No Server Activity - Performance Counters
14708 10 No Collects query statistics, T-SQL text, and query plans of most of the statements that affect performance. Enables analysis of poor performing queries in relation to overall SQL Server Database Engine activity.
14709 10 No Query Statistics
14710 10 No Query Statistics - Query Activity
14711 10 No Changes to SQL dumper configuration will take effect when the collection set is restarted. To perform an immediate dump, use the dtutil /dump option.
14712 16 No Only dbo or members of dc_admin can install or upgrade instmdw.sql. Contact an administrator with sufficient permissions to perform this operation.
14713 21 No A management data warehouse cannot be installed to SQL Server Express Edition.
14714 16 No Attempting to upgrade a Management Data Warehouse of newer version '%s' with an older version '%s'. Upgrade aborted.
14715 10 No Collects data about instances of SQL Server that are managed in the SQL Server Utility.
14716 10 No Utility Information
14718 10 No Utility Information - Managed Instance
14719 16 No "%s" has not been granted permission to use proxy.
14720 16 No The operation failed because credential '%s' identity is not a valid Windows account
14721 10 No AutoAdmin Subsystem
14801 16 No Multiple REMOTE_DATA_ARCHIVE definition.
14802 16 No Cannot disable REMOTE_DATA_ARCHIVE because the database contains at least one table having REMOTE_DATA_ARCHIVE enabled.
14803 16 No Cannot alter REMOTE_DATA_ARCHIVE option for table '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled for the database.
14804 16 No The database credential '%s' cannot be found or the user doesn't have premission to access the credential.
14806 16 No The identity specified for the database credential '%s' is invalid. The identity must be a valid username for the remote stretch server administrator.
14807 16 No The secret specified for the database credential '%s' is invalid. The secret must be a valid password for the remote stretch server administrator.
14808 16 No Cannot disable REMOTE_DATA_ARCHIVE when migration is enabled.
14809 16 No Cannot enable REMOTE_DATA_ARCHIVE on database '%s'. The REMOTE_DATA_ARCHIVE option can only be set on user databases.
14810 16 No The database option REMOTE_DATA_ARCHIVE is already enabled on database '%s'.
14811 16 No Remote server '%s' is not an Azure SQL Database V12 (or higher) server. A database can only be stretched to an Azure SQL Database V12 (or higher) server.
14812 16 No Cannot enable REMOTE_DATA_ARCHIVE for table '%.*ls' due to '%ls'. %ls
14813 16 No Cannot enable REMOTE_DATA_ARCHIVE for table '%.*ls' due to column '%.*ls' '%ls'. %ls
14814 16 No Code generation for REMOTE_DATA_ARCHIVE failed (%ls).
14815 16 No File error during REMOTE_DATA_ARCHIVE operation. GetLastError = %d (%ls).
14816 16 No The code generation directory cannot be created or set up correctly.
14817 16 No The server '%s' is not accessible. Ensure that the remote server exists and the Azure SQL DB Firewall Rules permit access to the server. If you believe that your server should be accessible please retry the command.
14818 10 No The %ls on table '%ls' will not be enforced because of the use of REMOTE_DATA_ARCHIVE.
14819 20 No Stretch operation failed due to an internal error.
14820 20 No The stretch code generator output is corrupted. Stretch code generation and remote table provisioning will be re-tried.
14821 16 No Cannot execute in REMOTE_ONLY mode since remote part does not exist or is invalid for this operation.
14822 16 No '%s' is not a valid option for the @mode parameter. Enter 'ALL', 'LOCAL_ONLY' or 'REMOTE_ONLY'.
14823 16 No %ls failed on table '%.*ls' because it is not supported on tables with REMOTE_DATA_ARCHIVE option enabled.
14824 16 No Access to REMOTE_DATA_ARCHIVE has been disabled through server configuration option 'remote data archive'. Use "exec sp_configure 'remote data archive', 1" to enable access to the server.
14825 16 No Cannot perform '%ls' on table '%.*ls' because REMOTE_DATA_ARCHIVE is enabled. %ls
14826 14 No Update and delete of rows eligible for migration in table '%.*ls' is not allowed because of the use of REMOTE_DATA_ARCHIVE.
14827 16 No Unable to access remote data archive: Error: %d, Severity: %d, State: %d, Line: %d '%s'
14828 16 No Cannot perform 'CREATE INDEX' on view '%.*ls' because it references table '%.*ls' with REMOTE_DATA_ARCHIVE enabled.
14829 16 No Table '%.*ls' cannot be used in READTEXT, WRITETEXT and UPDATETEXT statements because it has REMOTE_DATA_ARCHIVE option enabled.
14830 16 No Cannot query table '%.*ls' because this operation is currently disabled for this object.
14831 16 No Cannot set the Remote Data Archive query mode for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14832 10 No Querying tables having REMOTE_DATA_ARCHIVE option enabled will not be possible in LOCAL_AND_REMOTE query mode in database '%.*ls' before Remote Data Archive re-authorization is performed.
14833 16 No Cannot set the Remote Data Archive query mode LOCAL_AND_REMOTE for database '%.*ls' because data on remote side is not consistent. See the SQL Server errorlog for more information on the inconsistent objects.
14834 16 No Cannot de-authorize database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14835 16 No Cannot de-authorize database '%.*ls' because it is already disconnected from the remote database.
14836 16 No Cannot reconcile stretched indexes for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14837 16 No Cannot reconcile indexes for stretched table '%.*ls' because migration is not outbound on the table.
14838 16 No Table '%.*ls' cannot be accessed in SNAPSHOT transaction isolation level because it has REMOTE_DATA_ARCHIVE option enabled.
14839 16 No Only column identifiers are allowed as parameters passed to function '%.*ls'.
14840 16 No The filter predicate cannot be set for table '%.*ls' because all rows are already eligible for migration.
14841 16 No The filter predicate '%.*ls' for table '%.*ls' cannot be replaced with '%.*ls' because conditions necessary to perform the replacement are not satisfied.
14842 10 No The database '%.*ls' contains REMOTE_DATA_ARCHIVE tables, it will be marked as disconnected from the remote during the restore. If you would like to reconnect to the same archive or make a copy, refer to the sp_rda_reauthorize_db spec proc once the restore is complete.
14843 10 No Copying remote database '%.*ls' to remote database '%.*ls'.
14844 10 No Remote database '%.*ls' has completed copying, and is now online.
14845 10 No Waiting for remote database copy to complete.
14846 16 No Cannot re-authorize database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14847 16 No Cannot re-authorize database '%.*ls' because it is already authorized and connected to a remote database.
14848 16 No Attempted Migration failed. Remote insert failed. Error : %d.
14849 16 No Attempted Migration failed. Remote insert failed to insert all the rows. Expected rows : %d, Actual remote rows inserted: %d.
14850 16 No Attempted Migration failed. Incrementation of the batch ID failed. Expected batch ID : %I64d, Current batch ID : %I64d.
14851 16 No Attempted Reconciliation failed. The new max remote batch IDs is not less than the initial. Initial: %I64d, New: %I64d
14852 16 No Cannot query table '%.*ls' because data reconciliation is in progress. This is part of the automatic recovery process for a remote data archive enabled table. You may check the status of this operation in sys.remote_data_archive_tables.
14853 16 No Function '%.*ls' cannot be used as Stretch filter predicate because it does not meet necessary requirements.
14854 10 No The Remote Data Archive connection to the server '%ls' succeeded.
14855 16 No The Remote Data Archive connection to the server '%ls' failed.
14856 16 No The procedure %ls requires the %ls parameter if the database is not enabled for REMOTE_DATA_ARCHIVE.
14857 16 No The procedure %ls does not accept the %ls parameter if the database is enabled for REMOTE_DATA_ARCHIVE.
14858 16 No Cannot queue more stretch tasks. Please wait for remaining tasks to be finished and try again later.
14859 10 No The database '%.*ls' contains REMOTE_DATA_ARCHIVE tables, it will be marked as disconnected from the remote during the restore. If you would like to reconnect to the same archive or make a copy, refer to the sp_rda_reauthorize_db spec proc once the restore is complete.
14860 16 No '%.*ls' expects parameter '%.*ls', which was not supplied.
14861 16 No Modifying the collation is not allowed when REMOTE_DATA_ARCHIVE is already enabled on database '%.*ls'.
14862 16 No Cannot rename index '%ls'. Indexes on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
14863 16 No Stretch was disabled after migration started. Please enable stretch and retry.
14864 16 No Attempted inbound migration failed. Local insert failed. Error : %d.
14865 16 No Attempted inbound migration failed. Decrementation of the batch ID failed. Expected batch ID : %I64d, Current batch ID : %I64d.
14866 16 No Attempted unlinking of the stretched table failed. If this table isn't dropped, please retry the operation of setting REMOTE_DATA_ARCHIVE to OFF on the table.
14867 16 No User does not have permission to enable REMOTE_DATA_ARCHIVE with FEDERATED_SERVICE_ACCOUNT = ON.
14868 16 No Inbound migration is in progress or paused. Migration direction outbound cannot be set at this time. Please retry after inbound migration is complete.
14869 16 No Must be DB OWNER to use the REMOTA_DATA_ARCHIVE_OVERRIDE hint.
14870 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside a user transaction.
14871 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside an implicit transaction.
14872 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted on INSERT statements.
14873 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted within a view definition.
14874 16 No Table '%.*ls' cannot be a target of an update or delete statement with a FROM clause because it has the REMOTE_DATA_ARCHIVE option enabled.
14875 16 No DML operation failed because it would have affected one or more migrated (or migration-eligible) rows.
14876 16 No Table '%.*ls' cannot be the target of an update or delete statement through a view because it has the REMOTE_DATA_ARCHIVE option enabled.
14877 16 No Not all rows needed to reconcile with the remote data are available locally for table '%ls'. Needed batch ID : %I64d, Available batch ID : %I64d.
14878 16 No The filter predicate cannot be set for table '%ls' together with inbound migration.
14879 16 No Cannot perform update or delete using hint %.*ls over table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
14880 16 No Unexpected exception occurred during remote column update.
14881 16 No Unable to update remote data archive: Error: %d, Severity: %d, State: %d.
14882 16 No Cannot use STAGE_ONLY hint since the staging environment for the table '%.*ls' has not been provisioned yet.
14883 16 No Stretch remote table creation failed without specific exception.
14884 16 No Unable to load the stretch filter predicate for table "%.*ls".
14885 16 No Cannot reconcile columns for %S_MSG '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the %S_MSG.
14886 16 No Cannot set the rpo duration for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14887 16 No Cannot run the procedure %.*ls for table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
14888 16 No Attempted inbound migration failed. Insert failed to insert all the rows. Expected rows : %d, Actual remote rows: %d.
14889 16 No Unable to process DML statement due to an unexpected operator in the migration predicate for table "%.*ls".
14890 16 No The maximum batch ID in the staging table cannot be greater than %I64d. Please perform the necessary delete/update operation using STAGE_ONLY hint to correct it.
14891 16 No Table '%.*ls' cannot be a target of an update or delete statement with an OUTPUT clause because it has the REMOTE_DATA_ARCHIVE option enabled.
14892 16 No Table '%.*ls' cannot be a target of an update or delete statement through a CURSOR because it has the REMOTE_DATA_ARCHIVE option enabled.
14893 16 No Table '%.*ls' cannot be a target of an update or delete statement because it has the REMOTE_DATA_ARCHIVE option enabled without a migration predicate.
14894 16 No Table '%.*ls' cannot be a target of an update or delete statement because it has both the REMOTE_DATA_ARCHIVE option enabled and a BLOCK PREDICATE enabled.
14895 16 No Cannot run the procedure %.*ls for table '%.*ls' since the max batch ID found in the stage table is different than the max batch ID found in the remote table. Please make sure that you run the same hinted admin query on both tables to bring them in sync.
14896 10 No Reconciliation proc %.*ls brought down the local batch ID for the stretch table '%.*ls' of database '%.*ls' from %I64d to %I64d.
14897 16 No Cannot run the procedure %.*ls for table '%.*ls' since it is not stretched.
14898 16 No Cannot run the procedure %.*ls in database '%.*ls' since it is not connected to a remote database.
14899 16 No Specified RPO Duration cannot be less than the minimum duration of %d
14901 10 No Running an admin %ls operation on stretched table with ID %d using %ls hint.
14903 16 No Cannot rename column '%ls'. Columns on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
14904 10 No Reauthorizing stretched database '%.*ls' with the remote database has completed successfully. Now reconciling remote tables and/or remote columns...
14905 10 No Reconciliation of remote tables and/or remote columns for stretched database '%.*ls' has completed successfully.
14906 16 No The database '%s' is not accessible. Ensure that the remote database exists. If you believe that your database should be accessible please retry the command.
14908 16 No Cannot set REMOTE_DATA_ARCHIVE to OFF from ON. To retrieve remote data and turn off remote data archive, set REMOTE_DATA_ARCHIVE (MIGRATION_STATE = INBOUND). To turn off REMOTE_DATA_ARCHIVE without retrieving remote data, set REMOTE_DATA_ARCHIVE = OFF_WITHOUT_DATA_RECOVERY.
14909 16 No Cannot currently use the REMOTE_DATA_ARCHIVE_OVERRIDE hint with table '%.*ls' because the remote table has not yet been created.
14910 16 No Cannot currently perform the requested operation against table '%.*ls' because it has the REMOTE_DATA_ARCHIVE option enabled but the remote table has not yet been created.
14911 10 No %.*ls is set to '%.*ls' on table '%.*ls'.
14912 10 No REMOTE_DATA_ARCHIVE with value set to OFF_WITHOUT_DATA_RECOVERY is not supported at table creation. Please retry using a valid option'.
14913 10 No Failure was injected by '%ls' transaction/function.
14914 16 No The edition for database '%ls' is invalid. Only the Azure SQL Stretch edition is supported as a target for Stretch database.
14915 16 No The use of replication is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
14916 16 No Change Data Capture is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
14917 16 No The REMOTE_DATA_ARCHIVE option cannot be enabled on table '%ls' because it will exceed the maximum allowable size of %d bytes on the remote table due to an additional required system column.
Error Severity Event logged Description
14002 16 No Could not find the 'Sync' subsystem with the task ID %ld.
14003 16 No You must supply a publication name.
14004 16 No %s must be in the current database.
14005 16 No Cannot drop the publication because at least one subscription exists for this publication. Drop all subscriptions to the publication before attempting to drop the publication. If the problem persists, replication metadata might be incorrect; consult Books Online for troubleshooting information.
14006 16 No Could not drop the publication.
14008 11 No There are no publications.
14009 11 No There are no articles for publication '%s'.
14010 16 No The remote server '%s' is not defined as a subscription server. Ensure you specify the server name rather than a network alias.
14011 16 No Unable to mark server '%s' as a non SQL Server subscriber.
14012 16 No The @status parameter value must be either 'active' or 'inactive'.
14013 16 No This database is not enabled for publication.
14014 16 No The synchronization method (@sync_method) must be '[bcp] native', '[bcp] character', 'concurrent', 'concurrent_c', 'database snapshot', or 'database snapshot character'.
14015 16 No The replication frequency (@repl_freq) must be either 'continuous' or 'snapshot'.
14016 16 No The publication '%s' already exists.
14017 16 No Invalid @restricted parameter value. Valid options are 'true' or 'false'.
14018 16 No Could not create the publication.
14019 16 No The @operation parameter value must be either add, drop, or alter.
14020 16 No Could not obtain the column ID for the specified column. Schema replication failed.
14021 16 No The column was not added correctly to the article.
14022 16 No The @property parameter value must be either 'description', 'sync_object', 'type', 'ins_cmd', 'del_cmd', 'upd_cmd', 'filter', 'dest_table', 'dest_object', 'creation_script', 'pre_creation_cmd', 'status', 'schema_option', or 'destination_owner'.
14023 16 No The type must be '[indexed view ]logbased[ (manualview|manualfilter|manualboth)]', '[serializable ]proc exec', or '(view|indexed view|proc|func|aggregate|synonym) schema only'.
14024 16 No The value of property 'subscriber_provider' cannot be NULL.
14025 10 No Article update successful.
14026 16 No The value of property 'subscriber_type is not a supported heterogeneous subscriber type. The value must be 1 (ODBC subscriber), or 3 (OLEDB subscriber).
14027 11 No %s does not exist in the current database.
14028 16 No Only user tables, materialized views, and stored procedures can be published as 'logbased' articles.
14029 16 No The vertical partition switch must be either 'true' or 'false'.
14030 16 No The article '%s' exists in publication '%s'.
14031 16 No User tables and views are the only valid synchronization objects.
14032 16 No The value of parameter %s cannot be 'all'. It is reserved by replication stored procedures.
14033 16 No Could not change replication frequency because there are active subscriptions on the publication.
14034 16 No The publication name (@publication) cannot be the keyword 'all'.
14035 16 No The replication option '%s' of database '%s' has already been set to true.
14036 16 No Could not enable database for publishing.
14037 16 No The replication option '%s' of database '%s' has been set to false.
14038 16 No Could not disable database for publishing.
14039 16 No Could not construct column clause for article view. Reduce the number of columns or create the view manually.
14040 16 No The server '%s' is already a Subscriber.
14041 16 No The '%s' property can only be changed if the publication is enabled for heterogeneous subscriptions. The publication is not enabled.
14042 16 No Could not create Subscriber.
14043 16 No The parameter %s passed to stored procedure %s cannot be NULL.
14044 16 No Unable to clear subscriber status for the server.
14045 16 No Unable to update subscriber_type in MSdistribution_agents table.
14046 16 No Could not drop article. A subscription exists on it.
14047 16 No Could not drop %s.
14048 16 No The server '%s' is not a Subscriber.
14049 16 No Stored procedures for replication are the only objects that can be used as a filter.
14050 11 No No subscription is on this publication or article.
14051 16 No The parameter value must be 'sync_type' or 'dest_db'.
14052 16 No The @sync_type parameter value must be "automatic", "none", "replication support only", "initialize with backup", or "initialize from lsn".
14053 16 No The subscription could not be updated at this time.
14054 10 No The subscription was updated successfully.
14055 10 No The subscription does not exist.
14056 16 No The subscription could not be dropped at this time.
14057 16 No The subscription could not be created.
14058 16 No Cannot create the subscription because the subscription already exists in the subscription database. Only one subscription to the same publication is allowed in each subscription database. Drop the subscription and add it again if necessary. If the problem persists, replication metadata might be incorrect; see Books Online for troubleshooting information.
14059 16 No Materialized view articles cannot be created for publications with the properties allow_sync_tran, allow_queued_tran, or allow_dts.
14060 16 No Subscriber parameters specifying provider properties must be NULL for SQL Server subscribers.
14061 16 No The @pre_creation_cmd parameter value must be 'none', 'drop', 'delete', or 'truncate'.
14062 10 No The Subscriber was dropped.
14063 11 No The remote server does not exist or has not been designated as a valid Subscriber.
14064 10 No Found generation stuck at genstatus 4.
14065 16 No The @status parameter value must be 'initiated', 'active', 'inactive', or 'subscribed'.
14066 16 No The previous status must be 'active', 'inactive', or 'subscribed'.
14067 16 No The status value is the same as the previous status value.
14068 16 No The subscription status of the object could not be changed.
14069 16 No Could not update sysarticles. The subscription status could not be changed.
14070 16 No Could not update the distribution database subscription table. The subscription status could not be changed.
14071 16 No Could not find the Distributor or the distribution database for the local server. The Distributor may not be installed, or the local server may not be configured as a Publisher at the Distributor.
14074 16 No The server '%s' is already listed as a Publisher.
14075 16 No The Publisher could not be created at this time.
14076 16 No Could not grant replication login permission to '%s'.
14077 10 No The publication was updated successfully.
14078 16 No The parameter must be 'description', 'taskid', 'sync_method', 'status', 'repl_freq', 'restricted', 'retention', 'immediate_sync', 'enabled_for_internet', 'allow_push', 'allow_pull', 'allow_anonymous', or 'retention'.
14080 16 No The remote server "%s" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
14085 16 No The Subscriber information could not be obtained from the Distributor.
14088 16 No The table '%s' must have a primary key to be published using the transaction-based method.
14089 16 No The clustered index on materialized view '%s' may not contain nullable columns if it is to be published using the transaction-based method.
14090 16 No Error evaluating article synchronization object after column drop. The filter clause for article '%s' must not reference the dropped column.
14091 16 No The @type parameter passed to sp_helpreplicationdb must be either 'pub' or 'sub'.
14092 16 No Could not change article because there is an existing subscription to the article.
14093 16 No Cannot grant or revoke access directly on publication '%s' because it uses the default publication access list.
14094 16 No Could not subscribe to article '%s' because heterogeneous Subscriber '%s' does not support the @pre_creation_cmd parameter value 'truncate'.
14095 16 No The value for the @sync_method parameter is not valid. Could not subscribe to publication '%s' because non-SQL Server Subscriber '%s' only supports values of 'character', 'bcp character', 'concurrent_c', and 'database snapshot character' for the @sync_method parameter.
14096 16 No The path and name of the table creation script must be specified if the @pre_creation_cmd parameter value is 'drop'.
14097 16 No The 'status' value must be 'no column names', 'include column names', 'string literals', 'parameters', 'DTS horizontal partitions' or 'no DTS horizontal partitions'.
14098 16 No Cannot drop Distribution Publisher '%s'. The remote Publisher is using '%s' as Distributor. Disable publishing at the Publisher before attempting to drop this relationship.
14099 16 No The server '%s' is already defined as a Distributor. To reconfigure the server as a Distributor, you must first uninstall the exisiting Distributor. Use the stored procedure sp_dropdistributor, or use the Disable Publishing and Distribution Wizard.
14100 16 No Specify all articles when subscribing to a publication using concurrent snapshot processing.
14101 16 No The publication '%s' already has a Snapshot Agent defined.
14102 16 No Specify all articles when unsubscribing from a publication using concurrent snapshot processing.
14103 16 No Invalid "%s" value. Valid values are "publisher", "subscriber", or "both".
14105 10 No You have updated the distribution database property '%s' successfully.
14106 16 No Distribution retention periods must be greater than or equal to 0.
14107 10 No The @max_distretention value must be larger than the @min_distretention value.
14108 10 No Removed %ld history records from %s.
14109 10 No The @security_mode parameter value must be 0 (SQL Server Authentication), 1 (Integrated Authentication), 2 (Microsoft Entra Password Authentication), 3 (Microsoft Entra Integrated Authentication), or 4 (Microsoft Entra Service Principal Authentication).
14110 16 No For stored procedure articles, the @property parameter value must be 'description', 'dest_table', 'dest_object', 'creation_script', 'pre_creation_cmd', 'schema_option', or 'destination_owner'.
14111 16 No The @pre_creation_cmd parameter value must be 'none' or 'drop'.
14112 16 No This procedure can be executed only against table-based articles.
14113 16 No Could not execute '%s'. Check '%s' in the install directory.
14114 16 No The server '%s' is not configured as a Distributor.
14115 16 No The property parameter value must be %s.
14117 16 No '%s' is not configured as a distribution database.
14118 16 No A stored procedure can be published only as a 'serializable proc exec' article, a 'proc exec' article, or a 'proc schema only' article.
14119 16 No Could not add the distribution database '%s'. This distribution database already exists.
14120 16 No Could not drop the distribution database '%s'. This distributor database is associated with a Publisher.
14121 16 No Could not drop the Distributor '%s'. This Distributor has associated distribution databases.
14122 16 No The @article parameter value must be 'all' for immediate_sync publications.
14123 16 No The subscription @sync_type parameter value 'manual' is no longer supported.
14124 16 No A publication must have at least one article before a subscription to it can be created.
14126 16 No You do not have the required permissions to complete the operation.
14128 16 No Invalid @subscription_type parameter value. Valid options are 'push' or 'pull'.
14129 16 No The @status parameter value must be NULL for 'automatic' sync_type when you add subscriptions to an immediate_sync publication.
14135 16 No There is no subscription on Publisher '%s', publisher database '%s', publication '%s'.
14136 16 No The keyword 'all' is reserved by replication stored procedures.
14137 16 No The @value parameter value must be either 'true' or 'false'.
14138 16 No Invalid option name '%s'.
14139 16 No The replication system table '%s' already exists.
14143 16 No Cannot drop Distributor Publisher '%s'. There are Subscribers associated with it in the distribution database '%s'.
14144 16 No Cannot drop Subscriber '%s'. There are subscriptions for it in the publication database '%s'.
14146 16 No The article parameter '@schema_option' cannot be NULL.
14147 16 No Restricted publications are no longer supported.
14148 16 No Invalid '%s' value. Valid values are 'true' or 'false'.
14149 10 No Removed %ld replication history records in %s seconds (%ld row/secs).
14150 10 No Replication-%s: agent %s succeeded. %s
14151 18 Yes Replication-%s: agent %s failed. %s
14152 10 Yes Replication-%s: agent %s scheduled for retry. %s
14153 10 No Replication-%s: agent %s warning. %s
14154 16 No The Distributor parameter must be '@heartbeat_interval'.
14155 16 No Invalid article ID specified for procedure script generation.
14156 16 No The custom stored procedure calling the format for the %s command specified in the article definition does not match the %s format.
14157 10 Yes The subscription created by Subscriber '%s' to publication '%s' has expired and has been dropped.
14158 10 No Replication-%s: agent %s: %s.
14159 16 No Could not change property '%s' for article '%s' because there is an existing subscription to the article.
14160 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and change the expiration threshold value if necessary.
14161 10 Yes The threshold [%s:%s] for the publication [%s] has been set. Make sure that the logreader and distribution agents are running and can match the latency requirement.
14162 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14163 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14164 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14165 10 Yes One or more subscriptions has exceeded the threshold [%s:%s] for the publication [%s]. Check the status of subscriptions to this publication and adjust the threshold value if necessary.
14166 10 No Disable publishing ignored error msg %d, severity %d, state %d: %s.
14167 10 No Subscription expiration
14168 10 No Transactional replication latency
14169 10 No Long merge over dialup connection
14170 10 No Long merge over LAN connection
14171 10 No Slow merge over LAN connection
14172 10 No Slow merge over dialup connection
14173 18 Yes Replication-%s: agent initialization failed. %s
14196 10 No The agent has never been run.
14197 10 No Value of %s parameter should be in the set %s
14198 10 No The value of the %s parameter should be in the range %s. Verify that the specified parameter value is correct.
14199 10 No The specified job '%s' is not created for maintenance plans. Verify that the job has at least one step calling xp_sqlmaint.
14200 16 No The specified '%s' is invalid.
14201 10 No 0 (all steps) ..
14202 10 No before or after @active_start_time
14203 10 No sp_helplogins [excluding Windows NT groups]
14204 10 No 0 (non-idle), 1 (executing), 2 (waiting for thread), 3 (between retries), 4 (idle), 5 (suspended), 7 (performing completion actions)
14205 10 No (unknown)
14206 10 No 0..n seconds
14207 10 No -1 [no maximum], 0..n
14208 10 No 1..7 [1 = E-mail, 2 = Pager, 4 = NetSend]
14209 10 No 0..127 [1 = Sunday .. 64 = Saturday]
14210 10 No notification
14211 10 No server
14212 10 No (all jobs)
14213 10 No Core Job Details:
14214 10 No Job Steps:
14215 10 No Job Schedules:
14216 10 No Job Target Servers:
14217 10 No SQL Server Warning: '%s' has performed a forced defection of TSX server '%s'. Run sp_delete_targetserver at the MSX in order to complete the defection.
14218 10 No hour
14219 10 No minute
14220 10 No second
14221 16 No This job has one or more notifications to operators other than '%s'. The job cannot be targeted at remote servers as currently defined.
14222 16 No Cannot rename the '%s' operator.
14223 16 No Cannot modify or delete operator '%s' while this server is a %s.
14224 10 No Warning: The server name given is not the current MSX server ('%s').
14225 16 No Warning: Could not determine local machine name. This prevents MSX operations from being posted.
14226 10 No %ld history entries purged.
14227 10 No Server defected from MSX '%s'. %ld job(s) deleted.
14228 10 No Server MSX enlistment changed from '%s' to '%s'.
14229 10 No Server enlisted into MSX '%s'.
14230 10 No SP_POST_MSX_OPERATION: %ld %s download instruction(s) posted.
14231 10 No SP_POST_MSX_OPERATION Warning: The specified %s ('%s') is not involved in a multiserver job.
14232 16 No Specify either a job_name, job_id, or an originating_server.
14233 16 No Specify a valid job_id (or 0x00 for all jobs).
14234 16 No The specified '%s' is invalid (valid values are returned by %s).
14235 16 No The specified '%s' is invalid (valid values are greater than 0 but excluding %ld).
14236 10 No Warning: Non-existent step referenced by %s.
14237 16 No When an action of 'REASSIGN' is specified, the New Login parameter must also be supplied.
14238 10 No %ld jobs deleted.
14239 10 No %ld jobs reassigned to %s.
14240 10 No Job applied to %ld new servers.
14241 10 No Job removed from %ld servers.
14242 16 No Only a system administrator can reassign ownership of a job.
14243 10 No Job '%s' started successfully.
14245 16 No Specify either the @name, @id, or @loginname of the task(s) to be deleted.
14250 16 No The specified %s is too long. It must contain no more than %ld characters.
14251 16 No Cannot specify '%s' as the operator to be notified.
14252 16 No Cannot perform this action on a job you do not own.
14253 10 No %ld (of %ld) job(s) stopped successfully.
14254 10 No Job '%s' stopped successfully.
14255 16 No The owner ('%s') of this job is either an invalid login, or is not a valid user of database '%s'.
14256 16 No Cannot start the job "%s" (ID %s) because it does not have any job server or servers defined. Associate the job with a job server by calling sp_add_jobserver.
14257 16 No Cannot stop the job "%s" (ID %s) because it does not have any job server or servers defined. Associate the job with a job server by calling sp_add_jobserver.
14258 16 No Cannot perform this operation while SQLServerAgent is starting. Try again later.
14260 16 No You do not have sufficient permission to run this command. Contact your system administrator.
14261 16 No The specified %s ('%s') already exists.
14262 16 No The specified %s ('%s') does not exist.
14263 16 No Target server '%s' is already a member of group '%s'.
14264 16 No Target server '%s' is not a member of group '%s'.
14265 24 Yes The MSSQLServer service terminated unexpectedly. Check the SQL Server error log and operating system error logs for possible causes.
14266 16 No The specified '%s' is invalid (valid values are: %s).
14267 16 No Cannot add a job to the '%s' job category.
14268 16 No There are no jobs at this server that originated from server '%s'.
14269 16 No Job '%s' is already targeted at server '%s'.
14270 16 No Job '%s' is not currently targeted at server '%s'.
14271 16 No A target server cannot be named '%s'.
14272 16 No Object-type and object-name must be supplied as a pair.
14273 16 No You must provide either @job_id or @job_name (and, optionally, @schedule_name), or @schedule_id.
14274 16 No Cannot add, update, or delete a job (or its steps or schedules) that originated from an MSX server.
14275 16 No The originating server must be either local server or MSX server.
14276 16 No '%s' is a permanent %s category and cannot be deleted.
14277 16 No The command script does not destroy all the objects that it creates. Revise the command script.
14278 16 No The schedule for this job is invalid (reason: %s).
14279 16 No Supply either @job_name, @job_id or @originating_server.
14280 16 No Supply either a job name (and job aspect), or one or more job filter parameters.
14281 10 No Warning: The @new_owner_login_name parameter is not necessary when specifying a 'DELETE' action.
14282 16 No Supply either a date (created or last modified) and a data comparator, or no date parameters at all.
14283 16 No Supply @target_server_groups or @target_servers, or both.
14284 16 No Cannot specify a job ID for a new job. An ID will be assigned by the procedure.
14285 16 No Cannot add a local job to a multiserver job category.
14286 16 No Cannot add a multiserver job to a local job category.
14287 16 No The '%s' supplied has an invalid %s.
14288 16 No %s cannot be before %s.
14289 16 No %s cannot contain '%s' characters.
14290 16 No This job is currently targeted at the local server so cannot also be targeted at a remote server.
14291 16 No This job is currently targeted at a remote server so cannot also be targeted at the local server.
14292 16 No There are two or more tasks named '%s'. Specify %s instead of %s to uniquely identify the task.
14293 16 No There are two or more jobs named '%s'. Specify %s instead of %s to uniquely identify the job.
14294 16 No Supply either %s or %s to identify the job.
14295 16 No Frequency Type 0x2 (OnDemand) is no longer supported.
14296 16 No This server is already enlisted into MSX '%s'.
14297 16 No Cannot enlist into the local machine.
14298 16 No This server is not currently enlisted into an MSX.
14299 16 No Server '%s' is an MSX. Cannot enlist one MSX into another MSX.
14301 16 No Logins other than the current user can only be seen by members of the sysadmin role.
14305 16 No Column '%.*ls' does not exist in table '%.*ls'.
14306 16 No The target server (TSX) version is not compatible with the master server (MSX) version (%ld.%ld.%ld).
14307 16 No Access to Integration Services package '%s' is denied.
14350 16 No Cannot initialize COM library because CoInitialize failed.
14351 16 No Cannot complete this operation because an unexpected error occurred.
14353 16 No Cannot determine the service account for this SQL Server instance.
14357 16 No Cannot list '%s' in Active Directory because the name is too long. Active Directory common names cannot exceed 64 characters.
14360 16 No %s is already configured as TSX machine
14362 16 No The MSX server must be running the Standard or Enterprise edition of SQL Server
14363 16 No The MSX server is not prepared for enlistments [there must be an operator named 'MSXOperator' defined at the MSX]
14364 16 No The TSX server is not currently enlisted
14365 16 No Specify a valid schedule_uid.
14366 16 No Only members of sysadmin role can modify the owner of a schedule.
14367 16 No One or more schedules were not deleted because they are being used by at least one other job. Use "sp_detach_schedule" to remove schedules from a job.
14368 16 No Schedule "%s" was not deleted because it is being used by at least one other job. Use "sp_detach_schedule" to remove schedules from a job.
14369 16 No The schedule ID "%s" is used by more than one job. Specify the job_id.
14370 16 No The @originating_server must be either the local server name or the master server (MSX) name for MSX jobs on a target server (TSX).
14371 16 No There are two or more schedules named "%s". Specify %s instead of %s to uniquely identify the schedule.
14372 16 No The schedule was not deleted because it is being used by one or more jobs.
14373 16 No Supply either %s or %s to identify the schedule.
14374 16 No The specified schedule name "%s" is not associated with the job "%s".
14375 16 No More than one schedule named "%s" is attached to job "%s". Use "sp_update_schedule" to update schedules.
14376 16 No More than one schedule named "%s" is attached to job "%s". Use "sp_detach_schedule" to remove schedules from a job.
14377 16 No The schedule was not attached to the specified job. The caller must own the job or the operation must be performed by a sysadmin.
14378 16 No @sysadmin_only flag is no longer supported by SQLAgent and kept here only for backwards compatibility
14379 16 No Table '%s' foreign key 'originating_server_id' does not have a matching value in the referenced view 'dbo.sysoriginatingservers_view'.
14380 16 No Field 'originating_server_id' in table sysoriginatingservers is being referenced by either sysjobs or sysschedules.
14390 16 No Only members of role sysadmin can specify the %s parameter.
14391 16 No Only owner of a job or members of sysadmin role can detach a schedule.
14392 16 No Only owner of a job or members of role sysadmin or SQLAgentOperatorRole can purge history of the job.
14393 16 No Only owner of a job or members of role sysadmin or SQLAgentOperatorRole can start and stop the job.
14394 16 No Only owner of a job schedule or members of sysadmin role can modify or delete the job schedule.
14395 16 No '%s' is a member of sysadmin server role and cannot be granted to or revoked from the proxy. Members of sysadmin server role are allowed to use any proxy.
14396 16 No Only members of sysadmin server role can modify multi-server jobs
14397 16 No Only members of sysadmin server role can start/stop multi-server jobs
14398 16 No Only members of sysadmin server role can create multi-server jobs
14399 16 No Current proxy_id %d and new proxy_id %d cannot be the same.
14400 16 No Proxy %d does not have access to subsystem %d. Please use sp_grant_proxy_to_subsystem to grant permissions to this proxy.
14410 16 No You must supply either a plan_name or a plan_id.
14411 16 No Cannot delete this plan. The plan contains enlisted databases.
14412 16 No The destination database is already part of a log shipping plan.
14413 16 No This database is already log shipping.
14414 16 No A log shipping monitor is already defined.
14415 16 No The user name cannot be null when using SQL Server authentication.
14416 16 No This stored procedure must be run in msdb.
14417 16 No Cannot delete the monitor server while databases are participating in log shipping.
14418 16 No The specified @backup_file_name was not created from database '%s'.
14419 16 No The specified @backup_file_name is not a database backup.
14420 16 Yes The log shipping primary database %s.%s has backup threshold of %d minutes and has not performed a backup log operation for %d minutes. Check agent log and logshipping monitor information.
14421 16 Yes The log shipping secondary database %s.%s has restore threshold of %d minutes and is out of sync. No restore was performed for %d minutes. Restored latency is %d minutes. Check agent log and logshipping monitor information.
14422 16 No Supply either @plan_id or @plan_name.
14423 16 No Other databases are enlisted on this plan and must be removed before the plan can be deleted.
14424 16 No The database '%s' is already involved in log shipping.
14425 16 No The database '%s' does not seem to be involved in log shipping.
14426 16 No A log shipping monitor is already defined. Call sp_define_log_shipping_monitor with @delete_existing = 1.
14427 16 No A user name is necessary for SQL Server security.
14428 16 No Could not remove the monitor as there are still databases involved in log shipping.
14429 16 No There are still secondary servers attached to this primary.
14430 16 No Destination path %s is not valid. Unable to list directory contents. Specify a valid destination path.
14440 16 No Could not set single user mode.
14441 16 No Role change succeeded.
14442 16 No Role change failed.
14450 16 No The specified @backup_file_name was not taken from database '%s'.
14451 16 No The specified @backup_file_name is not a database backup.
14500 16 No Supply either a non-zero message ID, non-zero severity, non-null performance condition, or non-null WMI namespace and query.
14501 16 No An alert ('%s') has already been defined on this condition.
14502 16 No The @target_name parameter must be supplied when specifying an @enum_type of 'TARGET'.
14503 16 No The @target_name parameter should not be supplied when specifying an @enum_type of 'ALL' or 'ACTUAL'.
14504 16 No '%s' is the fail-safe operator. You must make another operator the fail-safe operator before '%s' can be dropped.
14505 16 No Specify a null %s when supplying a performance condition.
14506 16 No Cannot set alerts on message ID %ld.
14507 16 No A performance condition must be formatted as: 'object_name|counter_name|instance_name|comparator(> or < or =)|numeric value'.
14508 16 No Specify both @wmi_namespace and @wmi_query.
14509 16 No Specify a valid %s when supplying a @wmi_namespace.
14510 16 No Specify a null %s when supplying a @wmi_namespace.
14511 16 No The @wmi_query could not be executed in the @wmi_namespace provided. Verify that an event class selected in the query exists in the namespace and that the query has the correct syntax.
14512 16 No Specify a valid %s when supplying a @wmi_query.
14513 10 No Analysis query subsystem
14514 10 No Analysis command subsystem
14515 16 No Only a member of the sysadmin server role can add a job for a different owner with @owner_login_name.
14516 16 No Proxy (%d) is not allowed for subsystem "%s" and user "%s". Grant permission by calling sp_grant_proxy_to_subsystem or sp_grant_login_to_proxy.
14517 16 No A proxy account is not allowed for a Transact-SQL subsystem.
14518 16 No Cannot delete proxy (%d). It is used by at least one jobstep. Change this proxy for all jobsteps by calling sp_reassign_proxy.
14519 16 No Only one of @login_name, @fixed_server_role, or @msdb_role should be specified.
14520 16 No "%s" is not a valid SQL Server standard login, Windows NT user, Windows NT group, or msdb database role.
14521 16 No "%s" is not a valid SQL Server fixed server role, Windows NT user, or Windows NT group.
14522 16 No '"%s" is not a valid role of an msdb database, Windows NT user, or Windows NT group.
14523 16 No "%s" has not been granted permission to use proxy "%s".
14524 16 No Supply either %s or %s.
14525 16 No Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
14526 16 No The specified category "%s" does not exist for category class "%s".
14527 16 No Job "%s" cannot be used by an alert. It should first be associated with a server by calling sp_add_jobserver.
14528 16 No Job "%s" has no steps defined.
14529 16 No Proxy "%s" is not a valid Windows user.
14530 16 No The Transact-SQL subsystem cannot be executed under the context of a proxy account.
14531 16 No Permission to access proxy already granted. Verify current permissions assignments.
14532 16 No Supply both %s and %s, or none of them.
14533 16 No Use either a proxy or user_domain, user_name, or user_password parameter.
14534 16 No All user_domain, user_name, and user_password parameters should be defined.
14535 16 No The user_domain, user_name, and user_password parameters can be specified only for replication subsystems.
14536 16 No Only members of the sysadmin role can specify a "%s" parameter.
14537 16 No Execution in the context of disabled proxy (proxy_id = %d) is not allowed. Contact your system administrator.
14538 10 No SSIS package execution subsystem
14539 16 No Only a Standard or Enterprise edition of SQL Server can be enlisted into an MSX.
14540 16 No Only a SQL Server running on Microsoft Windows NT can be enlisted into an MSX.
14541 16 No The version of the MSX (%s) is not recent enough to support this TSX. Version %s or later is required at the MSX.
14542 16 No It is invalid for any TSQL step of a multiserver job to have a non-null %s value.
14543 16 No Login '%s' owns one or more multiserver jobs. Ownership of these jobs can only be assigned to members of the %s role.
14544 16 No This job is owned by '%s'. Only a job owned by a member of the %s role can be a multiserver job.
14545 16 No The %s parameter is not valid for a job step of type '%s'.
14546 16 No The %s parameter is not supported on Windows 95/98 platforms.
14547 10 No Warning: This change will not be downloaded by the target server(s) until an %s for the job is posted using %s.
14548 10 No Target server '%s' does not have any jobs assigned to it.
14549 10 No (Description not requested.)
14550 10 No Command-Line Subsystem
14551 10 No Replication Snapshot Subsystem
14552 10 No Replication Transaction-Log Reader Subsystem
14553 10 No Replication Distribution Subsystem
14554 10 No Replication Merge Subsystem
14555 10 No Active Scripting Subsystem
14556 10 No Transact-SQL Subsystem
14557 10 No [Internal]
14558 10 No (encrypted command)
14559 10 No (append output file)
14560 10 No (include results in history)
14561 10 No (normal)
14562 10 No (quit with success)
14563 10 No (quit with failure)
14564 10 No (goto next step)
14565 10 No (goto step)
14566 10 No (idle)
14567 10 No (below normal)
14568 10 No (above normal)
14569 10 No (time critical)
14570 10 No (Job outcome)
14571 10 No No description available.
14572 10 No @freq_interval must be at least 1 for a daily job.
14573 10 No @freq_interval must be a valid day of the week bitmask [Sunday = 1 .. Saturday = 64] for a weekly job.
14574 10 No @freq_interval must be between 1 and 31 for a monthly job.
14575 10 No @freq_relative_interval must be one of 1st (0x1), 2nd (0x2), 3rd [0x4], 4th (0x8) or Last (0x10).
14576 10 No @freq_interval must be between 1 and 10 (1 = Sunday .. 7 = Saturday, 8 = Day, 9 = Weekday, 10 = Weekend-day) for a monthly-relative job.
14577 10 No @freq_recurrence_factor must be at least 1.
14578 10 No Starts whenever the CPU usage has remained below %ld percent for %ld seconds.
14579 10 No Automatically starts when SQLServerAgent starts.
14580 10 No job
14581 10 No Replication Transaction Queue Reader Subsystem
14582 16 No Only a sysadmin can specify '@output_file_name' parameter for a jobstep.
14583 16 No Only a sysadmin can specify '@database_user_name' parameter.
14585 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may reassign its ownership.
14586 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may create new versions of it.
14587 16 No Only the owner of DTS Package '%s' or a member of the sysadmin role may drop it or any of its versions.
14588 10 No ID.VersionID =
14589 10 No [not specified]
14590 16 No DTS Package '%s' already exists with a different ID in this category.
14591 16 No SSIS folder '%s' already exists in the specified parent folder.
14592 16 No DTS Category '%s' was found in multiple parent categories. You must uniquely specify the category to be dropped.
14593 16 No SSIS folder '%s' contains packages and/or other folders. You must drop these first.
14594 10 No DTS Package
14595 16 No DTS Package '%s' exists in different categories. You must uniquely specify the package.
14596 16 No DTS Package '%s' exists in another category.
14597 16 No DTS Package ID '%s' already exists with a different name.
14598 16 No Cannot drop the Local, Repository, or LocalDefault DTS categories.
14599 10 No Name
14600 16 No Proxy "%s" has not been granted permission to use subsystem "%s".
14601 16 No Operator "%s" is not enabled and therefore cannot receive notifications.
14602 16 No Operator "%s" does not have an e-mail address specified.
14603 16 No Database Mail is not properly configured.
14604 16 No Both %s parameters (id and name) cannot be NULL
14605 16 No Both %s parameters (id and name) do not point to the same object
14606 16 No %s id is not valid
14607 16 No %s name is not valid
14608 16 No Either %s or %s parameter needs to be supplied
14609 16 No Mail database to user database association does not exist and therefore cannot be updated
14610 16 No Either @profile_name or @description parameter needs to be specified for update
14611 16 No Account sequence number must be supplied for update
14612 16 No Each principal should have at least one default profile
14613 16 No The specified '%s' cannot use commas (,) to separate addresses: '%s'. To continue, use semicolons (;) to separate addresses.
14614 16 No %s is not a valid mailserver_type
14615 16 No The @username parameter needs to be supplied if the @password is supplied.
14616 16 No Unable to retrieve the newly created credential [%s] from the credential store.
14617 16 No Mail host database specified is invalid
14618 16 No Parameter '%s' must be specified. This parameter cannot be NULL.
14619 16 No Received an error on the Service Broker conversation with Database Mail. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for information.
14620 16 No The Service Broker conversation to Database Mail ended without a response from Database Mail. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for more information.
14621 16 No Parameter @attachmentencoding does not support the value "%s". The attachment encoding must be "MIME".
14622 16 No Parameter @importance does not support the value "%s". Mail importance must be one of LOW, NORMAL, or HIGH.
14623 16 No Parameter @sensitivity does not support the value "%s". Mail sensitivity must be one of NORMAL, PERSONAL, PRIVATE, or CONFIDENTIAL.
14624 16 No At least one of the following parameters must be specified. "%s".
14625 16 No Parameter @attach_query_result_as_file cannot be 1 (true) when no value is specified for parameter @query. A query must be specified to attach the results of the query.
14626 16 No Parameter @mailformat does not support the value "%s". The mail format must be TEXT or HTML.
14627 16 No Received error %d while sending a message as part of the %s operation. Database Mail may not be available, or may have encountered an error. Check the Database Mail error log for more information.
14628 16 No The format of the parameter @attachments is incorrect. The file names must be separated by a semicolon ";".
14629 16 No There is no configuration parameter named "%s", or the value provided is not of the correct data type.
14630 16 No Database Mail is not permitted to send files with the file extension %s.
14631 16 No The current user ('%s') either does not have permission to access the database specified in the parameter @execute_query_database or cannot impersonate the user specified in the parameter @execute_query_as. Only members of the sysadmin fixed server role and members of the db_owner fixed database role can impersonate another user.
14632 16 No The user name %s specified in @execute_query_as is invalid. There is no user by that name.
14633 16 No The database name "%s" specified in @execute_query_database is invalid. There is no database by that name.
14634 10 No Warning: %s'
14635 10 No Mail (Id: %d) queued.
14636 16 No No global profile is configured. Specify a profile name in the @profile_name parameter.
14637 10 No Activation failure.
14638 10 No Activation successful.
14639 10 No The mail queue was started by login "%s".
14640 10 No The mail queue stopped by login "%s".
14641 16 No Mail not queued. Database Mail is stopped. Use sysmail_start_sp to start Database Mail.
14642 10 No Default attachment encoding
14643 10 No Default dialog lifetime
14644 10 No Default maximum file size
14645 10 No Extensions not allowed in outgoing mails
14646 10 No Number of retry attempts for a mail server
14647 10 No Delay between each retry attempt to mail server
14648 10 No Minimum process lifetime in seconds
14649 16 No Unable to test profile. Database Mail is stopped. Use sysmail_start_sp to start Database Mail.
14650 16 No Service Broker message delivery is not enabled in this database. Use the ALTER DATABASE statement to enable Service Broker message delivery.
14651 16 No Unable to test profile. Service Broker message delivery is not enabled in this database. Use the ALTER DATABASE statement to enable Service Broker message delivery.
14652 16 No Invalid message received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14653 16 No Invalid %s value received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14654 10 No Unexpected message received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14655 16 No Invalid XML message format received on the ExternalMailQueue. conversation_handle: %s. message_type_name: %s. message body: %s.
14657 16 No Mail not queued. Maximum number of mails per day (%ld) for login %s has been exceeded.
14658 16 No Failed to retrieve SQLPath for syssubsystems population.
14659 16 No Failed to retrieve VerSpecificRootDir for syssubsystems population.
14660 16 No Database Compatibility Level is too low. Compatibility Level must be Version80 or higher.
14661 16 No Query execution failed: %s
14662 10 No mailitem_id on conversation %s was not found in the sysmail_send_retries table. This mail item will not be sent.
14663 10 No Mail Id %d has exceeded the retry count. This mail item will not be sent.
14664 16 No Database Mail logging level: normal - 1, extended - 2 (default), verbose - 3
14665 10 No Mail items deletion is initiated by user "%s". %d items deleted.
14666 16 No User name cannot be supplied when using default credentials
14667 16 No Mail Id %d has been deleted from sysmail_mailitems table. This mail will not be sent.
14668 16 No Deleting profile %s failed because there are some unsent emails associated with this profile, use force_delete option to force the deletion of the profile.
14670 16 No Cannot delete the active collection set '%s'. Stop the collection set and then try to delete it again.
14671 16 No Cannot update the name or the parameters of the collection item '%s' in the active collection set '%s'. Stop the collection set and then try to update the collection item again.
14672 16 No Cannot delete the collection item '%s' in the active collection set '%s'. Stop the collection set and then try to delete the collection item again.
14673 16 No Cannot delete the collector type '%s'. Delete all collection items associated with this collector type and then try to delete it again.
14674 16 No Cannot upload data for the inactive collection set '%s'. Start the collection set and then try to upload the data again.
14675 16 No Cannot update the name, target, proxy_id, logging_level, or collection_mode, or add collection item to the active collection set '%s'. Stop the collection set and then try to update it again.
14676 16 No The user does not have permission to change '%s'. The user must be a member of data collector role '%s'.
14677 16 No The user does not have permission to perform this operation. The user must be a member of data collector role '%s'.
14678 16 No SQL Server Trace with id %d has been stopped and closed by external user. SQL Server Trace collector will attempt to re-create the trace.
14679 16 No The specified %s (%s) is not valid in this data warehouse.
14680 16 No Management Data Warehouse database can only be installed on an instance of SQL Server 2008 or higher.
14681 16 No Cannot perform this procedure when the collector is disabled. Enable the collector and then try again.
14682 16 No The state of the collection set has changed, but it will not start or stop until the collector is enabled.
14683 16 No A collection set in cached mode requires a schedule.
14684 16 No Caught error#: %d, Level: %d, State: %d, in Procedure: %s, Line: %d, with Message: %s
14685 16 No Collection set: '%s' does not contain any collection items, so starting the collection set will have no effect.
14686 16 No The MDWInstance and MDWDatabase parameters of the configuration store cannot be null.
14687 16 No Invalid value (%d) of the @cache_window parameter. Allowable values are: -1 (cache all upload data from previous upload failures), 0 (cache no upload data), N (cache data from N previous upload failures, where N >= 1)
14688 16 No A collection set cannot start when SQL Server Agent is stopped. Start SQL Server Agent.
14689 16 No A collection set cannot start if the management data warehouse is not configured. Run the instmdw.sql script to create and configure the management data warehouse.
14690 16 No Cannot perform this procedure when the collector is enabled. Disable the collector and then try again.
14691 16 No The status of the collector cannot be null. This may indicate an internal corruption in the collector configuration data.
14692 16 No Insufficient priveleges to start collection set: '%s'. Only a member of the 'sysadmin' fixed server role can start a collection set without a SQL Server Agent proxy. Attach a SQL Server Agent proxy to the collection set before retrying.
14693 16 No A collection set cannot start without a schedule. Specify a schedule for the collection set.
14694 16 No Cannot upload data on-demand for the collection set '%s' in non-cached mode.
14695 16 No Cannot collect data on-demand for the collection set '%s' in cached mode.
14696 16 No Cannot update or delete a system collection set, or add new collection items to it.
14697 16 No Unable to convert showplan to XML. Error #%d on Line %d: %s
14698 10 No PowerShell Subsystem
14699 16 No Data Collector cannot be enabled when SQL Server Agent is stopped. Start SQL Server Agent.
14700 10 No Collects data about the disk and log usage for all databases.
14701 10 No Disk Usage
14702 10 No Disk Usage - Data Files
14703 10 No Disk Usage - Log Files
14704 10 No Collects top-level performance indicators for the computer and the Database Engine. Enables analysis of resource use, resource bottlenecks, and Database Engine activity.
14705 10 No Server Activity
14706 10 No Server Activity - DMV Snapshots
14707 10 No Server Activity - Performance Counters
14708 10 No Collects query statistics, T-SQL text, and query plans of most of the statements that affect performance. Enables analysis of poor performing queries in relation to overall SQL Server Database Engine activity.
14709 10 No Query Statistics
14710 10 No Query Statistics - Query Activity
14711 10 No Changes to SQL dumper configuration will take effect when the collection set is restarted. To perform an immediate dump, use the dtutil /dump option.
14712 16 No Only dbo or members of dc_admin can install or upgrade instmdw.sql. Contact an administrator with sufficient permissions to perform this operation.
14713 21 No A management data warehouse cannot be installed to SQL Server Express Edition or Azure SQL Edge.
14714 16 No Attempting to upgrade a Management Data Warehouse of newer version '%s' with an older version '%s'. Upgrade aborted.
14715 10 No Collects data about instances of SQL Server that are managed in the SQL Server Utility.
14716 10 No Utility Information
14718 10 No Utility Information - Managed Instance
14719 16 No "%s" has not been granted permission to use proxy.
14720 16 No The operation failed because credential '%s' identity is not a valid Windows account
14721 10 No AutoAdmin Subsystem
14801 16 No Multiple REMOTE_DATA_ARCHIVE definition.
14802 16 No Cannot disable REMOTE_DATA_ARCHIVE because the database contains at least one table having REMOTE_DATA_ARCHIVE enabled.
14803 16 No Cannot alter REMOTE_DATA_ARCHIVE option for table '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled for the database.
14804 16 No The database credential '%s' cannot be found or the user doesn't have premission to access the credential.
14806 16 No The identity specified for the database credential '%s' is invalid. The identity must be a valid username for the remote stretch server administrator.
14807 16 No The secret specified for the database credential '%s' is invalid. The secret must be a valid password for the remote stretch server administrator.
14808 16 No Cannot disable REMOTE_DATA_ARCHIVE when migration is enabled.
14809 16 No Cannot enable REMOTE_DATA_ARCHIVE on database '%s'. The REMOTE_DATA_ARCHIVE option can only be set on user databases.
14810 16 No The database option REMOTE_DATA_ARCHIVE is already enabled on database '%s'.
14811 16 No Remote server '%s' is not an Azure SQL Database V12 (or higher) server. A database can only be stretched to an Azure SQL Database V12 (or higher) server.
14812 16 No Cannot enable REMOTE_DATA_ARCHIVE for table '%.*ls' due to '%ls'. %ls
14813 16 No Cannot enable REMOTE_DATA_ARCHIVE for table '%.*ls' due to column '%.*ls' '%ls'. %ls
14814 16 No Code generation for REMOTE_DATA_ARCHIVE failed (%ls).
14815 16 No File error during REMOTE_DATA_ARCHIVE operation. GetLastError = %d (%ls).
14816 16 No The code generation directory cannot be created or set up correctly.
14817 16 No The server '%s' is not accessible. Ensure that the remote server exists and the Azure SQL DB Firewall Rules permit access to the server. If you believe that your server should be accessible please retry the command.
14818 10 No The %ls on table '%ls' will not be enforced because of the use of REMOTE_DATA_ARCHIVE.
14819 20 No Stretch operation failed due to an internal error.
14820 20 No The stretch code generator output is corrupted. Stretch code generation and remote table provisioning will be re-tried.
14821 16 No Cannot execute in REMOTE_ONLY mode since remote part does not exist or is invalid for this operation.
14822 16 No '%s' is not a valid option for the @mode parameter. Enter 'ALL', 'LOCAL_ONLY' or 'REMOTE_ONLY'.
14823 16 No %ls failed on table '%.*ls' because it is not supported on tables with REMOTE_DATA_ARCHIVE option enabled.
14824 16 No Access to REMOTE_DATA_ARCHIVE has been disabled through server configuration option 'remote data archive'. Use "exec sp_configure 'remote data archive', 1" to enable access to the server.
14825 16 No Cannot perform '%ls' on table '%.*ls' because REMOTE_DATA_ARCHIVE is enabled. %ls
14826 14 No Update and delete of rows eligible for migration in table '%.*ls' is not allowed because of the use of REMOTE_DATA_ARCHIVE.
14827 16 No Unable to access remote data archive: Error: %d, Severity: %d, State: %d, Line: %d '%s'
14828 16 No Cannot perform 'CREATE INDEX' on view '%.*ls' because it references table '%.*ls' with REMOTE_DATA_ARCHIVE enabled.
14829 16 No Table '%.*ls' cannot be used in READTEXT, WRITETEXT and UPDATETEXT statements because it has REMOTE_DATA_ARCHIVE option enabled.
14830 16 No Cannot query table '%.*ls' because this operation is currently disabled for this object.
14831 16 No Cannot set the Remote Data Archive query mode for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14832 10 No Querying tables having REMOTE_DATA_ARCHIVE option enabled will not be possible in LOCAL_AND_REMOTE query mode in database '%.*ls' before Remote Data Archive re-authorization is performed.
14833 16 No Cannot set the Remote Data Archive query mode LOCAL_AND_REMOTE for database '%.*ls' because data on remote side is not consistent. See the SQL Server errorlog for more information on the inconsistent objects.
14834 16 No Cannot de-authorize database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14835 16 No Cannot de-authorize database '%.*ls' because it is already disconnected from the remote database.
14836 16 No Cannot reconcile stretched indexes for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14837 16 No Cannot reconcile indexes for stretched table '%.*ls' because migration is not outbound on the table.
14838 16 No Table '%.*ls' cannot be accessed in SNAPSHOT transaction isolation level because it has REMOTE_DATA_ARCHIVE option enabled.
14839 16 No Only column identifiers are allowed as parameters passed to function '%.*ls'.
14840 16 No The filter predicate cannot be set for table '%.*ls' because all rows are already eligible for migration.
14841 16 No The filter predicate '%.*ls' for table '%.*ls' cannot be replaced with '%.*ls' because conditions necessary to perform the replacement are not satisfied.
14842 10 No The database '%.*ls' contains REMOTE_DATA_ARCHIVE tables, it will be marked as disconnected from the remote during the restore. If you would like to reconnect to the same archive or make a copy, refer to the sp_rda_reauthorize_db spec proc once the restore is complete.
14843 10 No Copying remote database '%.*ls' to remote database '%.*ls'.
14844 10 No Remote database '%.*ls' has completed copying, and is now online.
14845 10 No Waiting for remote database copy to complete.
14846 16 No Cannot re-authorize database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14847 16 No Cannot re-authorize database '%.*ls' because it is already authorized and connected to a remote database.
14848 16 No Attempted Migration failed. Remote insert failed. Error : %d.
14849 16 No Attempted Migration failed. Remote insert failed to insert all the rows. Expected rows : %d, Actual remote rows inserted: %d.
14850 16 No Attempted Migration failed. Incrementation of the batch ID failed. Expected batch ID : %I64d, Current batch ID : %I64d.
14851 16 No Attempted Reconciliation failed. The new max remote batch IDs is not less than the initial. Initial: %I64d, New: %I64d
14852 16 No Cannot query table '%.*ls' because data reconciliation is in progress. This is part of the automatic recovery process for a remote data archive enabled table. You may check the status of this operation in sys.remote_data_archive_tables.
14853 16 No Function '%.*ls' cannot be used as Stretch filter predicate because it does not meet necessary requirements.
14854 10 No The Remote Data Archive connection to the server '%ls' succeeded.
14855 16 No The Remote Data Archive connection to the server '%ls' failed.
14856 16 No The procedure %ls requires the %ls parameter if the database is not enabled for REMOTE_DATA_ARCHIVE.
14857 16 No The procedure %ls does not accept the %ls parameter if the database is enabled for REMOTE_DATA_ARCHIVE.
14858 16 No Cannot queue more stretch tasks. Please wait for remaining tasks to be finished and try again later.
14859 10 No The database '%.*ls' contains REMOTE_DATA_ARCHIVE tables, it will be marked as disconnected from the remote during the restore. If you would like to reconnect to the same archive or make a copy, refer to the sp_rda_reauthorize_db spec proc once the restore is complete.
14860 16 No '%.*ls' expects parameter '%.*ls', which was not supplied.
14861 16 No Modifying the collation is not allowed when REMOTE_DATA_ARCHIVE is already enabled on database '%.*ls'.
14862 16 No Cannot rename index '%ls'. Indexes on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
14863 16 No Stretch was disabled after migration started. Please enable stretch and retry.
14864 16 No Attempted inbound migration failed. Local insert failed. Error : %d.
14865 16 No Attempted inbound migration failed. Decrementation of the batch ID failed. Expected batch ID : %I64d, Current batch ID : %I64d.
14866 16 No Attempted unlinking of the stretched table failed. If this table isn't dropped, please retry the operation of setting REMOTE_DATA_ARCHIVE to OFF on the table.
14867 16 No User does not have permission to enable REMOTE_DATA_ARCHIVE with FEDERATED_SERVICE_ACCOUNT = ON.
14868 16 No Inbound migration is in progress or paused. Migration direction outbound cannot be set at this time. Please retry after inbound migration is complete.
14869 16 No Must be DB OWNER to use the REMOTA_DATA_ARCHIVE_OVERRIDE hint.
14870 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside a user transaction.
14871 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint is not allowed inside an implicit transaction.
14872 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted on INSERT statements.
14873 16 No REMOTE_DATA_ARCHIVE_OVERRIDE hint not permitted within a view definition.
14874 16 No Table '%.*ls' cannot be a target of an update or delete statement with a FROM clause because it has the REMOTE_DATA_ARCHIVE option enabled.
14875 16 No DML operation failed because it would have affected one or more migrated (or migration-eligible) rows.
14876 16 No Table '%.*ls' cannot be the target of an update or delete statement through a view because it has the REMOTE_DATA_ARCHIVE option enabled.
14877 16 No Not all rows needed to reconcile with the remote data are available locally for table '%ls'. Needed batch ID : %I64d, Available batch ID : %I64d.
14878 16 No The filter predicate cannot be set for table '%ls' together with inbound migration.
14879 16 No Cannot perform update or delete using hint %.*ls over table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
14880 16 No Unexpected exception occurred during remote column update.
14881 16 No Unable to update remote data archive: Error: %d, Severity: %d, State: %d.
14882 16 No Cannot use STAGE_ONLY hint since the staging environment for the table '%.*ls' has not been provisioned yet.
14883 16 No Stretch remote table creation failed without specific exception.
14884 16 No Unable to load the stretch filter predicate for table "%.*ls".
14885 16 No Cannot reconcile columns for %S_MSG '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the %S_MSG.
14886 16 No Cannot set the rpo duration for database '%.*ls' because REMOTE_DATA_ARCHIVE is not enabled on the database.
14887 16 No Cannot run the procedure %.*ls for table '%.*ls' if migration is not paused. Please set MIGRATION_STATE to PAUSED and retry the operation.
14888 16 No Attempted inbound migration failed. Insert failed to insert all the rows. Expected rows : %d, Actual remote rows: %d.
14889 16 No Unable to process DML statement due to an unexpected operator in the migration predicate for table "%.*ls".
14890 16 No The maximum batch ID in the staging table cannot be greater than %I64d. Please perform the necessary delete/update operation using STAGE_ONLY hint to correct it.
14891 16 No Table '%.*ls' cannot be a target of an update or delete statement with an OUTPUT clause because it has the REMOTE_DATA_ARCHIVE option enabled.
14892 16 No Table '%.*ls' cannot be a target of an update or delete statement through a CURSOR because it has the REMOTE_DATA_ARCHIVE option enabled.
14893 16 No Table '%.*ls' cannot be a target of an update or delete statement because it has the REMOTE_DATA_ARCHIVE option enabled without a migration predicate.
14894 16 No Table '%.*ls' cannot be a target of an update or delete statement because it has both the REMOTE_DATA_ARCHIVE option enabled and a BLOCK PREDICATE enabled.
14895 16 No Cannot run the procedure %.*ls for table '%.*ls' since the max batch ID found in the stage table is different than the max batch ID found in the remote table. Please make sure that you run the same hinted admin query on both tables to bring them in sync.
14896 10 No Reconciliation proc %.*ls brought down the local batch ID for the stretch table '%.*ls' of database '%.*ls' from %I64d to %I64d.
14897 16 No Cannot run the procedure %.*ls for table '%.*ls' since it is not stretched.
14898 16 No Cannot run the procedure %.*ls in database '%.*ls' since it is not connected to a remote database.
14899 16 No Specified RPO Duration cannot be less than the minimum duration of %d
14901 10 No Running an admin %ls operation on stretched table with ID %d using %ls hint.
14903 16 No Cannot rename column '%ls'. Columns on tables with REMOTE_DATA_ARCHIVE option enabled cannot be renamed.
14904 10 No Reauthorizing stretched database '%.*ls' with the remote database has completed successfully. Now reconciling remote tables and/or remote columns...
14905 10 No Reconciliation of remote tables and/or remote columns for stretched database '%.*ls' has completed successfully.
14906 16 No The database '%s' is not accessible. Ensure that the remote database exists. If you believe that your database should be accessible please retry the command.
14908 16 No Cannot set REMOTE_DATA_ARCHIVE to OFF from ON. To retrieve remote data and turn off remote data archive, set REMOTE_DATA_ARCHIVE (MIGRATION_STATE = INBOUND). To turn off REMOTE_DATA_ARCHIVE without retrieving remote data, set REMOTE_DATA_ARCHIVE = OFF_WITHOUT_DATA_RECOVERY.
14909 16 No Cannot currently use the REMOTE_DATA_ARCHIVE_OVERRIDE hint with table '%.*ls' because the remote table has not yet been created.
14910 16 No Cannot currently perform the requested operation against table '%.*ls' because it has the REMOTE_DATA_ARCHIVE option enabled but the remote table has not yet been created.
14911 10 No %.*ls is set to '%.*ls' on table '%.*ls'.
14912 10 No REMOTE_DATA_ARCHIVE with value set to OFF_WITHOUT_DATA_RECOVERY is not supported at table creation. Please retry using a valid option'.
14913 10 No Failure was injected by '%ls' transaction/function.
14914 16 No The edition for database '%ls' is invalid. Only the Azure SQL Stretch edition is supported as a target for Stretch database.
14915 16 No The use of replication is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
14916 16 No Change Data Capture is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.
14917 16 No The REMOTE_DATA_ARCHIVE option cannot be enabled on table '%ls' because it will exceed the maximum allowable size of %d bytes on the remote table due to an additional required system column.
14918 16 Yes Reconfigure Failed. sp_configure option 'remote data archive' cannot be updated to 1. Stretch Database functionality is currently not supported with Azure SQL Edge.
14919 16 No Change Feed is not supported for table '%ls' with REMOTE_DATA_ARCHIVE enabled.