Copy and transform data in Microsoft Fabric Lakehouse using Azure Data Factory or Azure Synapse Analytics

Artikkel
07/19/2024

APPLIES TO: Azure Data Factory Azure Synapse Analytics

Tip

Try out Data Factory in Microsoft Fabric, an all-in-one analytics solution for enterprises. Microsoft Fabric covers everything from data movement to data science, real-time analytics, business intelligence, and reporting. Learn how to start a new trial for free!

Microsoft Fabric Lakehouse is a data architecture platform for storing, managing, and analyzing structured and unstructured data in a single location. In order to achieve seamless data access across all compute engines in Microsoft Fabric, go to Lakehouse and Delta Tables to learn more. By default, data is written to Lakehouse Table in V-Order, and you can go to Delta Lake table optimization and V-Order for more information.

This article outlines how to use Copy activity to copy data from and to Microsoft Fabric Lakehouse and use Data Flow to transform data in Microsoft Fabric Lakehouse. To learn more, read the introductory article for Azure Data Factory or Azure Synapse Analytics.

Supported capabilities

This Microsoft Fabric Lakehouse connector is supported for the following capabilities:

Supported capabilities	IR
Copy activity (source/sink)	① ②
Mapping data flow (source/sink)	①
Lookup activity	① ②
GetMetadata activity	① ②
Delete activity	① ②

① Azure integration runtime ② Self-hosted integration runtime

Get started

To perform the Copy activity with a pipeline, you can use one of the following tools or SDKs:

Create a Microsoft Fabric Lakehouse linked service using UI

Use the following steps to create a Microsoft Fabric Lakehouse linked service in the Azure portal UI.

Browse to the Manage tab in your Azure Data Factory or Synapse workspace and select Linked Services, then select New:
- Azure Data Factory
- Azure Synapse
Search for Microsoft Fabric Lakehouse and select the connector.
Configure the service details, test the connection, and create the new linked service.

Connector configuration details

The following sections provide details about properties that are used to define Data Factory entities specific to Microsoft Fabric Lakehouse.

Linked service properties

The Microsoft Fabric Lakehouse connector supports the following authentication types. See the corresponding sections for details:

Service principal authentication

Service principal authentication

To use service principal authentication, follow these steps.

Register an application with the Microsoft Identity platform and add a client secret. Afterwards, make note of these values, which you use to define the linked service:
- Application (client) ID, which is the service principal ID in the linked service.
- Client secret value, which is the service principal key in the linked service.
- Tenant ID
Grant the service principal at least the Contributor role in Microsoft Fabric workspace. Follow these steps:
1. Go to your Microsoft Fabric workspace, select Manage access on the top bar. Then select Add people or groups.
2. In Add people pane, enter your service principal name, and select your service principal from the drop-down list.
  
  Note
  
  The service principal will not appear in the Add people list unless the Power BI tenant settings enable service principals access to Fabric APIs.
3. Specify the role as Contributor or higher (Admin, Member), then select Add.
4. Your service principal is displayed on Manage access pane.

These properties are supported for the linked service:

Property	Description	Required
type	The type property must be set to Lakehouse.	Yes
workspaceId	The Microsoft Fabric workspace ID.	Yes
artifactId	The Microsoft Fabric Lakehouse object ID.	Yes
tenant	Specify the tenant information (domain name or tenant ID) under which your application resides. Retrieve it by hovering the mouse in the upper-right corner of the Azure portal.	Yes
servicePrincipalId	Specify the application's client ID.	Yes
servicePrincipalCredentialType	The credential type to use for service principal authentication. Allowed values are ServicePrincipalKey and ServicePrincipalCert.	Yes
servicePrincipalCredential	The service principal credential. When you use ServicePrincipalKey as the credential type, specify the application's client secret value. Mark this field as SecureString to store it securely, or reference a secret stored in Azure Key Vault. When you use ServicePrincipalCert as the credential, reference a certificate in Azure Key Vault, and ensure the certificate content type is PKCS #12.	Yes
connectVia	The integration runtime to be used to connect to the data store. You can use the Azure integration runtime or a self-hosted integration runtime if your data store is in a private network. If not specified, the default Azure integration runtime is used.	No

Example: using service principal key authentication

You can also store service principal key in Azure Key Vault.

{
    "name": "MicrosoftFabricLakehouseLinkedService",
    "properties": {
        "type": "Lakehouse",
        "typeProperties": {
            "workspaceId": "<Microsoft Fabric workspace ID>",
            "artifactId": "<Microsoft Fabric Lakehouse object ID>",
            "tenant": "<tenant info, e.g. microsoft.onmicrosoft.com>",
            "servicePrincipalId": "<service principal id>",
            "servicePrincipalCredentialType": "ServicePrincipalKey",
            "servicePrincipalCredential": {
                "type": "SecureString",
                "value": "<service principal key>"
            }   
        },
        "connectVia": {
            "referenceName": "<name of Integration Runtime>",
            "type": "IntegrationRuntimeReference"
        }
    }
}

Dataset properties

Microsoft Fabric Lakehouse connector supports two types of datasets, which are Microsoft Fabric Lakehouse Files dataset and Microsoft Fabric Lakehouse Table dataset. See the corresponding sections for details.

Microsoft Fabric Lakehouse Files dataset
Microsoft Fabric Lakehouse Table dataset

For a full list of sections and properties available for defining datasets, see Datasets.

Microsoft Fabric Lakehouse Files dataset

Microsoft Fabric Lakehouse connector supports the following file formats. Refer to each article for format-based settings.

The following properties are supported under location settings in the format-based Microsoft Fabric Lakehouse Files dataset:

Property	Description	Required
type	The type property under `location` in the dataset must be set to LakehouseLocation.	Yes
folderPath	The path to a folder. If you want to use a wildcard to filter folders, skip this setting and specify it in activity source settings.	No
fileName	The file name under the given folderPath. If you want to use a wildcard to filter files, skip this setting and specify it in activity source settings.	No

Example:

{
    "name": "DelimitedTextDataset",
    "properties": {
        "type": "DelimitedText",
        "linkedServiceName": {
            "referenceName": "<Microsoft Fabric Lakehouse linked service name>",
            "type": "LinkedServiceReference"
        },
        "typeProperties": {
            "location": {
                "type": "LakehouseLocation",
                "fileName": "<file name>",
                "folderPath": "<folder name>"
            },
            "columnDelimiter": ",",
            "compressionCodec": "gzip",
            "escapeChar": "\\",
            "firstRowAsHeader": true,
            "quoteChar": "\""
        },
        "schema": [ < physical schema, optional, auto retrieved during authoring > ]
    }
}

Microsoft Fabric Lakehouse Table dataset

The following properties are supported for Microsoft Fabric Lakehouse Table dataset:

Property	Description	Required
type	The type property of the dataset must be set to LakehouseTable.	Yes
schema	Name of the schema. If not specified, the default value is `dbo`.	No
table	The name of your table.	Yes

Example:

{ 
    "name": "LakehouseTableDataset", 
    "properties": {
        "type": "LakehouseTable",
        "linkedServiceName": { 
            "referenceName": "<Microsoft Fabric Lakehouse linked service name>", 
            "type": "LinkedServiceReference" 
        }, 
        "typeProperties": { 
            "schema": "<schema_name>",
            "table": "<table_name>"   
        },
        "schema": [< physical schema, optional, retrievable during authoring >]
    } 
}

Copy activity properties

The copy activity properties for Microsoft Fabric Lakehouse Files dataset and Microsoft Fabric Lakehouse Table dataset are different. See the corresponding sections for details.

Microsoft Fabric Lakehouse Files in Copy activity
Microsoft Fabric Lakehouse Table in Copy activity

For a full list of sections and properties available for defining activities, see Copy activity configurations and Pipelines and activities.

Microsoft Fabric Lakehouse Files in Copy activity

To use Microsoft Fabric Lakehouse Files dataset type as a source or sink in Copy activity, go to the following sections for the detailed configurations.

Microsoft Fabric Lakehouse Files as a source type

Microsoft Fabric Lakehouse connector supports the following file formats. Refer to each article for format-based settings.

You have several options to copy data from Microsoft Fabric Lakehouse using the Microsoft Fabric Lakehouse Files dataset:

Copy from the given path specified in the dataset.
Wildcard filter against folder path or file name, see wildcardFolderPath and wildcardFileName.
Copy the files defined in a given text file as file set, see fileListPath.

The following properties are under storeSettings settings in format-based copy source when using Microsoft Fabric Lakehouse Files dataset:

Property	Description	Required
type	The type property under `storeSettings` must be set to LakehouseReadSettings.	Yes
Locate the files to copy:
OPTION 1: static path	Copy from the folder/file path specified in the dataset. If you want to copy all files from a folder, additionally specify `wildcardFileName` as `*`.
OPTION 2: wildcard - wildcardFolderPath	The folder path with wildcard characters to filter source folders. Allowed wildcards are: `*` (matches zero or more characters) and `?` (matches zero or single character); use `^` to escape if your actual folder name has wildcard or this escape char inside. See more examples in Folder and file filter examples.	No
OPTION 2: wildcard - wildcardFileName	The file name with wildcard characters under the given folderPath/wildcardFolderPath to filter source files. Allowed wildcards are: `*` (matches zero or more characters) and `?` (matches zero or single character); use `^` to escape if your actual file name has wildcard or this escape char inside. See more examples in Folder and file filter examples.	Yes
OPTION 3: a list of files - fileListPath	Indicates to copy a given file set. Point to a text file that includes a list of files you want to copy, one file per line, which is the relative path to the path configured in the dataset. When using this option, don't specify file name in dataset. See more examples in File list examples.	No
Additional settings:
recursive	Indicates whether the data is read recursively from the subfolders or only from the specified folder. When recursive is set to true and the sink is a file-based store, an empty folder or subfolder isn't copied or created at the sink. Allowed values are true (default) and false. This property doesn't apply when you configure `fileListPath`.	No
deleteFilesAfterCompletion	Indicates whether the binary files will be deleted from source store after successfully moving to the destination store. The file deletion is per file, so when copy activity fails, you see some files have already been copied to the destination and deleted from source, while others are still remaining on source store. This property is only valid in binary files copy scenario. The default value: false.	No
modifiedDatetimeStart	Files filter based on the attribute: Last Modified. The files will be selected if their last modified time is greater than or equal to `modifiedDatetimeStart` and less than `modifiedDatetimeEnd`. The time is applied to UTC time zone in the format of "2018-12-01T05:00:00Z". The properties can be NULL, which means no file attribute filter is applied to the dataset. When `modifiedDatetimeStart` has datetime value but `modifiedDatetimeEnd` is NULL, it means the files whose last modified attribute is greater than or equal with the datetime value will be selected. When `modifiedDatetimeEnd` has datetime value but `modifiedDatetimeStart` is NULL, it means the files whose last modified attribute is less than the datetime value will be selected. This property doesn't apply when you configure `fileListPath`.	No
modifiedDatetimeEnd	Same as above.	No
enablePartitionDiscovery	For files that are partitioned, specify whether to parse the partitions from the file path and add them as another source columns. Allowed values are false (default) and true.	No
partitionRootPath	When partition discovery is enabled, specify the absolute root path in order to read partitioned folders as data columns. If it isn't specified, by default, - When you use file path in dataset or list of files on source, partition root path is the path configured in dataset. - When you use wildcard folder filter, partition root path is the subpath before the first wildcard. For example, assuming you configure the path in dataset as "root/folder/year=2020/month=08/day=27": - If you specify partition root path as "root/folder/year=2020", copy activity generates two more columns `month` and `day` with value "08" and "27" respectively, in addition to the columns inside the files. - If partition root path isn't specified, no extra column is generated.	No
maxConcurrentConnections	The upper limit of concurrent connections established to the data store during the activity run. Specify a value only when you want to limit concurrent connections.	No

Example:

"activities": [
    {
        "name": "CopyFromLakehouseFiles",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "<Delimited text input dataset name>",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "<output dataset name>",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "DelimitedTextSource",
                "storeSettings": {
                    "type": "LakehouseReadSettings",
                    "recursive": true,
                    "enablePartitionDiscovery": false
                },
                "formatSettings": {
                    "type": "DelimitedTextReadSettings"
                }
            },
            "sink": {
                "type": "<sink type>"
            }
        }
    }
]

Microsoft Fabric Lakehouse Files as a sink type

Microsoft Fabric Lakehouse connector supports the following file formats. Refer to each article for format-based settings.

The following properties are under storeSettings settings in format-based copy sink when using Microsoft Fabric Lakehouse Files dataset:

Property	Description	Required
type	The type property under `storeSettings` must be set to LakehouseWriteSettings.	Yes
copyBehavior	Defines the copy behavior when the source is files from a file-based data store. Allowed values are: - PreserveHierarchy (default): Preserves the file hierarchy in the target folder. The relative path of the source file to the source folder is identical to the relative path of the target file to the target folder. - FlattenHierarchy: All files from the source folder are in the first level of the target folder. The target files have autogenerated names. - MergeFiles: Merges all files from the source folder to one file. If the file name is specified, the merged file name is the specified name. Otherwise, it's an autogenerated file name.	No
blockSizeInMB	Specify the block size in MB used to write data to Microsoft Fabric Lakehouse. Learn more about Block Blobs. Allowed value is between 4 MB and 100 MB. By default, ADF automatically determines the block size based on your source store type and data. For nonbinary copy into Microsoft Fabric Lakehouse, the default block size is 100 MB so as to fit in at most approximately 4.75-TB data. It might be not optimal when your data isn't large, especially when you use Self-hosted Integration Runtime with poor network resulting in operation timeout or performance issue. You can explicitly specify a block size, while ensure blockSizeInMB*50000 is large enough to store the data, otherwise copy activity run fails.	No
maxConcurrentConnections	The upper limit of concurrent connections established to the data store during the activity run. Specify a value only when you want to limit concurrent connections.	No
metadata	Set custom metadata when copy to sink. Each object under the `metadata` array represents an extra column. The `name` defines the metadata key name, and the `value` indicates the data value of that key. If preserve attributes feature is used, the specified metadata will union/overwrite with the source file metadata. Allowed data values are: - `$$LASTMODIFIED`: a reserved variable indicates to store the source files' last modified time. Apply to file-based source with binary format only. - Expression - Static value	No

Example:

"activities": [
    {
        "name": "CopyToLakehouseFiles",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "<input dataset name>",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "<Parquet output dataset name>",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "<source type>"
            },
            "sink": {
                "type": "ParquetSink",
                "storeSettings": {
                    "type": "LakehouseWriteSettings",
                    "copyBehavior": "PreserveHierarchy",
                    "metadata": [
                        {
                            "name": "testKey1",
                            "value": "value1"
                        },
                        {
                            "name": "testKey2",
                            "value": "value2"
                        }
                    ]
                },
                "formatSettings": {
                    "type": "ParquetWriteSettings"
                }
            }
        }
    }
]

Folder and file filter examples

This section describes the resulting behavior of the folder path and file name with wildcard filters.

folderPath	fileName	recursive	Source folder structure and filter result (files in bold are retrieved)
`Folder*`	(Empty, use default)	false	FolderA File1.csv File2.json Subfolder1 File3.csv File4.json File5.csv AnotherFolderB File6.csv
`Folder*`	(Empty, use default)	true	FolderA File1.csv File2.json Subfolder1 File3.csv File4.json File5.csv AnotherFolderB File6.csv
`Folder*`	`*.csv`	false	FolderA File1.csv File2.json Subfolder1 File3.csv File4.json File5.csv AnotherFolderB File6.csv
`Folder*`	`*.csv`	true	FolderA File1.csv File2.json Subfolder1 File3.csv File4.json File5.csv AnotherFolderB File6.csv

File list examples

This section describes the resulting behavior of using file list path in copy activity source.

Assuming you have the following source folder structure and want to copy the files in bold:

Sample source structure	Content in FileListToCopy.txt	ADF configuration
filesystem FolderA File1.csv File2.json Subfolder1 File3.csv File4.json File5.csv Metadata FileListToCopy.txt	File1.csv Subfolder1/File3.csv Subfolder1/File5.csv	In dataset: - Folder path: `FolderA` In copy activity source: - File list path: `Metadata/FileListToCopy.txt` The file list path points to a text file in the same data store that includes a list of files you want to copy, one file per line with the relative path to the path configured in the dataset.

Some recursive and copyBehavior examples

This section describes the resulting behavior of the copy operation for different combinations of recursive and copyBehavior values.

recursive	copyBehavior	Source folder structure	Resulting target
true	preserveHierarchy	Folder1 File1 File2 Subfolder1 File3 File4 File5	The target Folder1 is created with the same structure as the source: Folder1 File1 File2 Subfolder1 File3 File4 File5
true	flattenHierarchy	Folder1 File1 File2 Subfolder1 File3 File4 File5	The target Folder1 is created with the following structure: Folder1 autogenerated name for File1 autogenerated name for File2 autogenerated name for File3 autogenerated name for File4 autogenerated name for File5
true	mergeFiles	Folder1 File1 File2 Subfolder1 File3 File4 File5	The target Folder1 is created with the following structure: Folder1 File1 + File2 + File3 + File4 + File5 contents are merged into one file with an autogenerated file name.
false	preserveHierarchy	Folder1 File1 File2 Subfolder1 File3 File4 File5	The target Folder1 is created with the following structure: Folder1 File1 File2 Subfolder1 with File3, File4, and File5 isn't picked up.
false	flattenHierarchy	Folder1 File1 File2 Subfolder1 File3 File4 File5	The target Folder1 is created with the following structure: Folder1 autogenerated name for File1 autogenerated name for File2 Subfolder1 with File3, File4, and File5 isn't picked up.
false	mergeFiles	Folder1 File1 File2 Subfolder1 File3 File4 File5	The target Folder1 is created with the following structure: Folder1 File1 + File2 contents are merged into one file with an autogenerated file name. autogenerated name for File1 Subfolder1 with File3, File4, and File5 isn't picked up.

Microsoft Fabric Lakehouse Table in Copy activity

To use Microsoft Fabric Lakehouse Table dataset as a source or sink dataset in Copy activity, go to the following sections for the detailed configurations.

Microsoft Fabric Lakehouse Table as a source type

To copy data from Microsoft Fabric Lakehouse using Microsoft Fabric Lakehouse Table dataset, set the type property in the Copy activity source to LakehouseTableSource. The following properties are supported in the Copy activity source section:

Property	Description	Required
type	The type property of the Copy Activity source must be set to LakehouseTableSource.	Yes
timestampAsOf	The timestamp to query an older snapshot.	No
versionAsOf	The version to query an older snapshot.	No

Example:

"activities":[
    {
        "name": "CopyFromLakehouseTable",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "<Microsoft Fabric Lakehouse Table input dataset name>",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "<output dataset name>",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "LakehouseTableSource",
                "timestampAsOf": "2023-09-23T00:00:00.000Z",
                "versionAsOf": 2
            },
            "sink": {
                "type": "<sink type>"
            }
        }
    }
]

Microsoft Fabric Lakehouse Table as a sink type

To copy data to Microsoft Fabric Lakehouse using Microsoft Fabric Lakehouse Table dataset, set the type property in the Copy Activity sink to LakehouseTableSink. The following properties are supported in the Copy activity sink section:

Property	Description	Required
type	The type property of the Copy Activity source must be set to LakehouseTableSink.	Yes

Note

Data is written to Lakehouse Table in V-Order by default. For more information, go to Delta Lake table optimization and V-Order.

Example:

"activities":[
    {
        "name": "CopyToLakehouseTable",
        "type": "Copy",
        "inputs": [
            {
                "referenceName": "<input dataset name>",
                "type": "DatasetReference"
            }
        ],
        "outputs": [
            {
                "referenceName": "<Microsoft Fabric Lakehouse Table output dataset name>",
                "type": "DatasetReference"
            }
        ],
        "typeProperties": {
            "source": {
                "type": "<source type>"
            },
            "sink": {
                "type": "LakehouseTableSink",
                "tableActionOption ": "Append"
            }
        }
    }
]

Mapping data flow properties

When transforming data in mapping data flow, you can read and write to files or tables in Microsoft Fabric Lakehouse. See the corresponding sections for details.

Microsoft Fabric Lakehouse Files in mapping data flow
Microsoft Fabric Lakehouse Table in mapping data flow

For more information, see the source transformation and sink transformation in mapping data flows.

Microsoft Fabric Lakehouse Files in mapping data flow

To use Microsoft Fabric Lakehouse Files dataset as a source or sink dataset in mapping data flow, go to the following sections for the detailed configurations.

Microsoft Fabric Lakehouse Files as a source or sink type

Microsoft Fabric Lakehouse connector supports the following file formats. Refer to each article for format-based settings.

To use Fabric Lakehouse file-based connector in inline dataset type, you need to choose the right Inline dataset type for your data. You can use DelimitedText, Avro, JSON, ORC, or Parquet depending on your data format.

Microsoft Fabric Lakehouse Table in mapping data flow

To use Microsoft Fabric Lakehouse Table dataset as a source or sink dataset in mapping data flow, go to the following sections for the detailed configurations.

Microsoft Fabric Lakehouse Table as a source type

There are no configurable properties under source options.

Note

CDC support for Lakehouse table source is currently not available.

Microsoft Fabric Lakehouse Table as a sink type

The following properties are supported in the Mapping Data Flows sink section:

Name	Description	Required	Allowed values	Data flow script property
Update method	When you select "Allow insert" alone or when you write to a new delta table, the target receives all incoming rows regardless of the Row policies set. If your data contains rows of other Row policies, they need to be excluded using a preceding Filter transform. When all Update methods are selected a Merge is performed, where rows are inserted/deleted/upserted/updated as per the Row Policies set using a preceding Alter Row transform.	yes	`true` or `false`	insertable deletable upsertable updateable
Optimized Write	Achieve higher throughput for write operation via optimizing internal shuffle in Spark executors. As a result, you might notice fewer partitions and files that are of a larger size	no	`true` or `false`	optimizedWrite: true
Auto Compact	After any write operation has completed, Spark will automatically execute the `OPTIMIZE` command to reorganize the data, resulting in more partitions if necessary, for better reading performance in the future	no	`true` or `false`	autoCompact: true
Merge Schema	Merge schema option allows schema evolution, that is, any columns that are present in the current incoming stream but not in the target Delta table is automatically added to its schema. This option is supported across all update methods.	no	`true` or `false`	mergeSchema: true

Example: Microsoft Fabric Lakehouse Table sink

sink(allowSchemaDrift: true, 
    validateSchema: false, 
    input( 
        CustomerID as string,
        NameStyle as string, 
        Title as string, 
        FirstName as string, 
        MiddleName as string,
        LastName as string, 
        Suffix as string, 
        CompanyName as string,
        SalesPerson as string, 
        EmailAddress as string, 
        Phone as string, 
        PasswordHash as string, 
        PasswordSalt as string, 
        rowguid as string, 
        ModifiedDate as string 
    ), 
    deletable:false, 
    insertable:true, 
    updateable:false, 
    upsertable:false, 
    optimizedWrite: true, 
    mergeSchema: true, 
    autoCompact: true, 
    skipDuplicateMapInputs: true, 
    skipDuplicateMapOutputs: true) ~> CustomerTable

For Fabric Lakehouse table-based connector in inline dataset type, you only need to use Delta as dataset type. This will allow you to read and write data from Fabric Lakehouse tables.

Lookup activity properties

To learn details about the properties, check Lookup activity.

GetMetadata activity properties

To learn details about the properties, check GetMetadata activity

Delete activity properties

To learn details about the properties, check Delete activity

For a list of data stores supported as sources and sinks by the copy activity, see Supported data stores.

Del via

Copy and transform data in Microsoft Fabric Lakehouse using Azure Data Factory or Azure Synapse Analytics

Supported capabilities

Get started

Create a Microsoft Fabric Lakehouse linked service using UI

Connector configuration details

Linked service properties

Service principal authentication

Dataset properties

Microsoft Fabric Lakehouse Files dataset

Microsoft Fabric Lakehouse Table dataset

Copy activity properties

Microsoft Fabric Lakehouse Files in Copy activity

Microsoft Fabric Lakehouse Files as a source type

Microsoft Fabric Lakehouse Files as a sink type

Folder and file filter examples

File list examples

Some recursive and copyBehavior examples

Microsoft Fabric Lakehouse Table in Copy activity

Microsoft Fabric Lakehouse Table as a source type

Microsoft Fabric Lakehouse Table as a sink type

Mapping data flow properties

Microsoft Fabric Lakehouse Files in mapping data flow

Microsoft Fabric Lakehouse Files as a source or sink type

Microsoft Fabric Lakehouse Table in mapping data flow

Microsoft Fabric Lakehouse Table as a source type

Microsoft Fabric Lakehouse Table as a sink type

Lookup activity properties

GetMetadata activity properties

Delete activity properties

Tilbakemeldinger

Flere ressurser

Del via

Copy and transform data in Microsoft Fabric Lakehouse using Azure Data Factory or Azure Synapse Analytics

Supported capabilities

Get started

Create a Microsoft Fabric Lakehouse linked service using UI

Connector configuration details

Linked service properties

Service principal authentication

Dataset properties

Microsoft Fabric Lakehouse Files dataset

Microsoft Fabric Lakehouse Table dataset

Copy activity properties

Microsoft Fabric Lakehouse Files in Copy activity

Microsoft Fabric Lakehouse Files as a source type

Microsoft Fabric Lakehouse Files as a sink type

Folder and file filter examples

File list examples

Some recursive and copyBehavior examples

Microsoft Fabric Lakehouse Table in Copy activity

Microsoft Fabric Lakehouse Table as a source type

Microsoft Fabric Lakehouse Table as a sink type

Mapping data flow properties

Microsoft Fabric Lakehouse Files in mapping data flow

Microsoft Fabric Lakehouse Files as a source or sink type

Microsoft Fabric Lakehouse Table in mapping data flow

Microsoft Fabric Lakehouse Table as a source type

Microsoft Fabric Lakehouse Table as a sink type

Lookup activity properties

GetMetadata activity properties

Delete activity properties

Related content

Tilbakemeldinger

Flere ressurser