Bewerken

Delen via


Move a TDE protected database to another SQL Server

Applies to: SQL Server

This article describes how to protect a database by using transparent data encryption (TDE), and then move the database to another instance of SQL Server by using SQL Server Management Studio or Transact-SQL. TDE performs real-time I/O encryption and decryption of the data and log files. The encryption uses a database encryption key (DEK), which is stored in the database boot record for availability during recovery. The DEK is a symmetric key secured by using a certificate stored in the master database of the server or an asymmetric key protected by an EKM module.

Limitations

  • When moving a TDE protected database, you must also move the certificate or asymmetric key that is used to open the DEK. The certificate or asymmetric key must be installed in the master database of the destination server, so that SQL Server can access the database files. For more information, see Transparent data encryption (TDE).

  • You must retain copies of both the certificate file and the private key file in order to recover the certificate. The password for the private key doesn't have to be the same as the database master key password.

  • SQL Server stores the files created here in C:\Program Files\Microsoft SQL Server\MSSQL<xx>.MSSQLSERVER\MSSQL\DATA by default, where <xx> is the version number.

Permissions

  • Requires CONTROL DATABASE permission on the master database to create the database master key.

  • Requires CREATE CERTIFICATE permission on the master database to create the certificate that protects the DEK.

  • Requires CONTROL DATABASE permission on the encrypted database and VIEW DEFINITION permission on the certificate or asymmetric key that is used to encrypt the database encryption key.

Create a database protected by Transparent Data Encryption

The following procedures show you how to create a database protected by TDE using SQL Server Management Studio and by using Transact-SQL.

Use SQL Server Management Studio

  1. Create a database master key and certificate in the master database. For more information, see Using Transact-SQL later in this article.

  2. Create a backup of the server certificate in the master database. For more information, see Using Transact-SQL later in this article.

  3. In Object Explorer, right-click the Databases folder and select New Database.

  4. In the New Database dialog box, in the Database name box, enter the name of the new database.

  5. In the Owner box, enter the name of the new database's owner. Alternately, select the ellipsis (...) to open the Select Database Owner dialog box. For more information on creating a new database, see Create a database.

  6. In Object Explorer, select the plus sign to expand the Databases folder.

  7. Right-click the database you created, point to Tasks, and select Manage Database Encryption.

    The following options are available on the Manage Database Encryption dialog box.

    Encryption Algorithm
    Displays or sets the algorithm to use for database encryption. AES128 is the default algorithm. This field can't be blank. For more information on encryption algorithms, see Choose an encryption algorithm.

    Use server certificate
    Sets the encryption to be secured by a certificate. Select one from the list. If you don't have the VIEW DEFINITION permission on server certificates, this list is empty. If a certificate method of encryption is selected, this value can't be empty. For more information about certificates, see SQL Server Certificates and Asymmetric Keys.

    Use server asymmetric key
    Sets the encryption to be secured by an asymmetric key. Only available asymmetric keys are displayed. Only an asymmetric key protected by an EKM module can encrypt a database using TDE.

    Set Database Encryption On
    Alters the database to turn on (checked) or turn off (unchecked) TDE.

  8. When finished, select OK.

Use Transact-SQL

  1. In Object Explorer, connect to an instance of Database Engine.

  2. On the Standard bar, select New Query.

  3. Copy and paste the following example into the query window and select Execute.

    -- Create a database master key and a certificate in the master database.
    USE master;
    GO
    
    CREATE MASTER KEY ENCRYPTION BY PASSWORD = '*rt@40(FL&dasl1';
    GO
    
    CREATE CERTIFICATE TestSQLServerCert
        WITH SUBJECT = 'Certificate to protect TDE key'
    GO
    
    -- Create a backup of the server certificate in the master database.
    -- The following code stores the backup of the certificate and the private key file in the default data location for this instance of SQL Server
    -- (C:\Program Files\Microsoft SQL Server\MSSQL16.MSSQLSERVER\MSSQL\DATA).
    BACKUP CERTIFICATE TestSQLServerCert TO FILE = 'TestSQLServerCert'
    WITH PRIVATE KEY (
        FILE = 'SQLPrivateKeyFile',
        ENCRYPTION BY PASSWORD = '*rt@40(FL&dasl1'
    );
    GO
    
    -- Create a database to be protected by TDE.
    CREATE DATABASE CustRecords;
    GO
    
    -- Switch to the new database.
    -- Create a database encryption key, that is protected by the server certificate in the master database.
    -- Alter the new database to encrypt the database using TDE.
    USE CustRecords;
    GO
    
    CREATE DATABASE ENCRYPTION KEY
        WITH ALGORITHM = AES_128 ENCRYPTION BY SERVER CERTIFICATE TestSQLServerCert;
    GO
    
    ALTER DATABASE CustRecords
    SET ENCRYPTION ON;
    GO
    

For more information, see:

Move a database protected by Transparent Data Encryption

The following procedures show you how to move a database protected by TDE using SQL Server Management Studio and by using Transact-SQL.

Use SQL Server Management Studio

  1. In Object Explorer, right-click the database you encrypted previously, point to Tasks and select Detach....

    The following options are available in the Detach Database dialog box.

    Databases to detach
    Lists the databases to detach.

    Database Name
    Displays the name of the database to be detached.

    Drop Connections
    Disconnect connections to the specified database.

Note

You can't detach a database with active connections.

Update Statistics
By default, the detach operation retains any out-of-date optimization statistics when detaching the database; to update the existing optimization statistics, select this check box.

Keep Full-Text Catalogs
By default, the detach operation keeps any full-text catalogs that are associated with the database. To remove them, clear the Keep Full-Text Catalogs check box. This option appears only when you're upgrading a database from SQL Server 2005 (9.x).

Status
Displays one of the following states: Ready or Not ready.

Message
The Message column might display information about the database, as follows:

  • When a database is involved with replication, the Status is Not ready and the Message column displays Database replicated.

  • When a database has one or more active connections, the Status is Not ready and the Message column displays <number_of_active_connections>Active connection(s) - for example: 1 Active connection(s). Before you can detach the database, you need to disconnect any active connections by selecting Drop Connections.

To obtain more information about a message, select the hyperlinked text to open Activity Monitor.

  1. Select OK.

  2. Using Windows Explorer, move or copy the database files from the source server to the same location on the destination server.

  3. Using Windows Explorer, move or copy the backup of the server certificate and the private key file from the source server to the same location on the destination server.

  4. Create a database master key on the destination instance of SQL Server. For more information, see Using Transact-SQL later in this article.

  5. Recreate the server certificate by using the original server certificate backup file. For more information, see Using Transact-SQL later in this article.

  6. In Object Explorer in SQL Server Management Studio, right-click the Databases folder and select Attach....

  7. In the Attach Databases dialog box, under Databases to attach, select Add.

  8. In the Locate Database Files -server_name dialog box, select the database file to attach to the new server and select OK.

    The following options are available in the Attach Databases dialog box.

    Databases to attach
    Displays information about the selected databases.

    <no column header>
    Displays an icon indicating the status of the attach operation. The possible icons are described in the Status description.

    MDF File Location
    Displays the path and file name of the selected MDF file.

    Database Name
    Displays the name of the database.

    Attach As
    Optionally, specifies a different name for the database to attach as.

    Owner
    Provides a dropdown list of possible database owners from which you can optionally select a different owner.

    Status
    Displays the status of the database according to the following table.

Icon Status text Description
(No icon) (No text) Attach operation wasn't started or might be pending for this object. This is the default when the dialog is opened.
Green, right-pointing triangle In progress Attach operation was started but it's not complete.
Green check mark Success The object was attached successfully.
Red circle containing a white cross Error Attach operation encountered an error and didn't complete successfully.
Circle containing two black quadrants (on left and right) and two white quadrants (on top and bottom) Stopped Attach operation wasn't completed successfully because the user stopped the operation.
Circle containing a curved arrow pointing counter-clockwise Rolled Back Attach operation was successful but it was rolled back due to an error during attachment of another object.

Message
Displays either a blank message or a "File not found" hyperlink.

Add
Find the necessary main database files. When the user selects an .mdf file, applicable information is automatically filled in the respective fields of the Databases to attach grid.

Remove
Removes the selected file from the Databases to attach grid.

" <database_name> " database details
Displays the names of the files to be attached. To verify or change the pathname of a file, select the Browse button (...).

Note

If a file doesn't exist, the Message column displays "Not found." If a log file isn't found, it exists in another directory or has been deleted. You need to either update the file path in the database details grid to point to the correct location or remove the log file from the grid. If an .ndf data file isn't found, you need to update its path in the grid to point to the correct location.

Original File Name
Displays the name of the attached file belonging to the database.

File Type
Indicates the type of file, Data, or Log.

Current File Path
Displays the path to the selected database file. The path can be edited manually.

Message
Displays either a blank message or a "File not found" hyperlink.

Use Transact-SQL

  1. In Object Explorer, connect to an instance of Database Engine.

  2. On the Standard bar, select New Query.

  3. Copy and paste the following example into the query window and select Execute.

    -- Detach the TDE protected database from the source server.
    USE master;
    GO
    
    EXEC master.dbo.sp_detach_db @dbname = N'CustRecords';
    GO
    
    -- Move or copy the database files from the source server to the same location on the destination server.
    -- Move or copy the backup of the server certificate and the private key file from the source server to the same location on the destination server.
    -- Create a database master key on the destination instance of SQL Server.
    USE master;
    GO
    
    CREATE MASTER KEY ENCRYPTION BY PASSWORD = '*rt@40(FL&dasl1';
    GO
    
    -- Recreate the server certificate by using the original server certificate backup file.
    -- The password must be the same as the password that was used when the backup was created.
    CREATE CERTIFICATE TestSQLServerCert
    FROM FILE = 'TestSQLServerCert'
    WITH PRIVATE KEY (
        FILE = 'SQLPrivateKeyFile',
        DECRYPTION BY PASSWORD = '*rt@40(FL&dasl1'
    );
    GO
    
    -- Attach the database that is being moved.
    -- The path of the database files must be the location where you have stored the database files.
    CREATE DATABASE [CustRecords] ON (FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL16.MSSQLSERVER\MSSQL\DATA\CustRecords.mdf'),
        (FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL16.MSSQLSERVER\MSSQL\DATA\CustRecords_log.LDF')
    FOR ATTACH;
    GO
    

For more information, see: