Notitie
Voor toegang tot deze pagina is autorisatie vereist. U kunt proberen u aan te melden of mappen te wijzigen.
Voor toegang tot deze pagina is autorisatie vereist. U kunt proberen om mappen te wijzigen.
De callback- en pollingmodellen voor het verwerken van asynchrone bewerkingen zijn handig wanneer uw toepassing slechts één asynchrone bewerking tegelijk verwerkt. De wait-modellen bieden een flexibelere manier om meerdere asynchrone bewerkingen te verwerken. Er zijn twee Wait-modellen, genaamd voor de WaitHandle methoden die worden gebruikt om ze te implementeren: het Wait(Any)-model en het Wait(All)-model.
Als u een Wait-model wilt gebruiken, moet u de AsyncWaitHandle eigenschap van het IAsyncResult object gebruiken dat wordt geretourneerd door de BeginExecuteNonQuery, BeginExecuteReaderof BeginExecuteXmlReader methoden. WaitAny Voor WaitAll beide methoden moet u de WaitHandle objecten als argument verzenden, gegroepeerd in een matrix.
Beide wachtmethoden bewaken de asynchrone bewerkingen totdat ze voltooid zijn. De WaitAny methode wacht tot een van de bewerkingen is voltooid of er een time-out optreedt. Zodra u weet dat een bepaalde bewerking is voltooid, kunt u de resultaten verwerken en vervolgens wachten tot de volgende bewerking is voltooid of er een time-out optreedt. De WaitAll methode wacht tot alle processen in de matrix met WaitHandle exemplaren zijn voltooid of er een time-out optreedt voordat u doorgaat.
Het voordeel van wachtmodellen is het meest opvallend wanneer u meerdere bewerkingen van een bepaalde lengte op verschillende servers moet uitvoeren of wanneer uw server krachtig genoeg is om alle query's tegelijkertijd te verwerken. In de voorbeelden die hier worden weergegeven, emuleren drie query's lange processen door WAITFOR-opdrachten van verschillende lengtes toe te voegen aan inconsistente SELECT-query's.
Voorbeeld: Wait (Any) model
In het volgende voorbeeld ziet u het model Wait (Any). Zodra drie asynchrone processen zijn gestart, wordt de WaitAny methode aangeroepen om te wachten op de voltooiing van een van deze processen. Wanneer elk proces is voltooid, wordt de EndExecuteReader methode aangeroepen en wordt het resulterende SqlDataReader object gelezen. Op dit moment zou een praktijktoepassing waarschijnlijk SqlDataReader gebruiken om een deel van de pagina te vullen. In dit eenvoudige voorbeeld wordt het tijdstip waarop het proces is voltooid, toegevoegd aan een tekstvak dat overeenkomt met het proces. Samen, de tijden in de tekstvakken illustreren het punt: Code wordt elke keer uitgevoerd wanneer een proces is voltooid.
Als u dit voorbeeld wilt instellen, maakt u een nieuw ASP.NET-websiteproject. Plaats een Button besturingselement en vier TextBox besturingselementen op de pagina (waarbij de standaardnaam voor elk besturingselement wordt geaccepteerd).
Voeg de volgende code toe aan de klasse van het formulier en wijzig zo nodig de verbindingsreeks voor uw omgeving.
// Add the following using statements, if they are not already there.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Threading;
using Microsoft.Data.SqlClient;
// Add this code to the page's class
string GetConnectionString()
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true"
// in the connection string, the command will not be able
// to execute asynchronously.
{
return "Data Source=(local);Integrated Security=SSPI;" +
"Initial Catalog=AdventureWorks;" +
"Asynchronous Processing=true";
}
void Button1_Click(object sender, System.EventArgs e)
{
// In a real-world application, you might be connecting to
// three different servers or databases. For the example,
// we connect to only one.
SqlConnection connection1 =
new SqlConnection(GetConnectionString());
SqlConnection connection2 =
new SqlConnection(GetConnectionString());
SqlConnection connection3 =
new SqlConnection(GetConnectionString());
// To keep the example simple, all three asynchronous
// processes select a row from the same table. WAITFOR
// commands are used to emulate long-running processes
// that complete after different periods of time.
string commandText1 = "WAITFOR DELAY '0:0:01';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
string commandText2 = "WAITFOR DELAY '0:0:05';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
string commandText3 = "WAITFOR DELAY '0:0:10';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
try
// For each process, open a connection and begin
// execution. Use the IAsyncResult object returned by
// BeginExecuteReader to add a WaitHandle for the
// process to the array.
{
connection1.Open();
SqlCommand command1 =
new SqlCommand(commandText1, connection1);
IAsyncResult result1 = command1.BeginExecuteReader();
WaitHandle waitHandle1 = result1.AsyncWaitHandle;
connection2.Open();
SqlCommand command2 =
new SqlCommand(commandText2, connection2);
IAsyncResult result2 = command2.BeginExecuteReader();
WaitHandle waitHandle2 = result2.AsyncWaitHandle;
connection3.Open();
SqlCommand command3 =
new SqlCommand(commandText3, connection3);
IAsyncResult result3 = command3.BeginExecuteReader();
WaitHandle waitHandle3 = result3.AsyncWaitHandle;
WaitHandle[] waitHandles = {
waitHandle1, waitHandle2, waitHandle3
};
int index;
for (int countWaits = 0; countWaits <= 2; countWaits++)
{
// WaitAny waits for any of the processes to
// complete. The return value is either the index
// of the array element whose process just
// completed, or the WaitTimeout value.
index = WaitHandle.WaitAny(waitHandles,
60000, false);
// This example doesn't actually do anything with
// the data returned by the processes, but the
// code opens readers for each just to demonstrate
// the concept.
// Instead of using the returned data to fill the
// controls on the page, the example adds the time
// the process was completed to the corresponding
// text box.
switch (index)
{
case 0:
SqlDataReader reader1;
reader1 =
command1.EndExecuteReader(result1);
if (reader1.Read())
{
TextBox1.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader1.Close();
break;
case 1:
SqlDataReader reader2;
reader2 =
command2.EndExecuteReader(result2);
if (reader2.Read())
{
TextBox2.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader2.Close();
break;
case 2:
SqlDataReader reader3;
reader3 =
command3.EndExecuteReader(result3);
if (reader3.Read())
{
TextBox3.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader3.Close();
break;
case WaitHandle.WaitTimeout:
throw new Exception("Timeout");
break;
}
}
}
catch (Exception ex)
{
TextBox4.Text = ex.ToString();
}
connection1.Close();
connection2.Close();
connection3.Close();
}
Voorbeeld: Wachtmodel (Alle)
In het volgende voorbeeld ziet u het model Wait (All). Zodra drie asynchrone processen zijn gestart, wordt de WaitAll methode aangeroepen om te wachten totdat de processen zijn voltooid of een time-out hebben.
Net als in het voorbeeld van het model Wait (Any) wordt het tijdstip waarop het proces is voltooid, toegevoegd aan een tekstvak dat overeenkomt met het proces. Nogmaals, de tijden in de tekstvakken illustreren het punt: Code die de WaitAny methode volgt, wordt pas uitgevoerd nadat alle processen zijn voltooid.
Als u dit voorbeeld wilt instellen, maakt u een nieuw ASP.NET-websiteproject. Plaats een Button besturingselement en vier TextBox besturingselementen op de pagina (waarbij de standaardnaam voor elk besturingselement wordt geaccepteerd).
Voeg de volgende code toe aan de klasse van het formulier en wijzig zo nodig de verbindingsreeks voor uw omgeving.
// Add the following using statements, if they are not already there.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Threading;
using Microsoft.Data.SqlClient;
// Add this code to the page's class
string GetConnectionString()
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true"
// in the connection string, the command will not be able
// to execute asynchronously.
{
return "Data Source=(local);Integrated Security=SSPI;" +
"Initial Catalog=AdventureWorks;" +
"Asynchronous Processing=true";
}
void Button1_Click(object sender, System.EventArgs e)
{
// In a real-world application, you might be connecting to
// three different servers or databases. For the example,
// we connect to only one.
SqlConnection connection1 =
new SqlConnection(GetConnectionString());
SqlConnection connection2 =
new SqlConnection(GetConnectionString());
SqlConnection connection3 =
new SqlConnection(GetConnectionString());
// To keep the example simple, all three asynchronous
// processes execute UPDATE queries that result in
// no change to the data. WAITFOR
// commands are used to emulate long-running processes
// that complete after different periods of time.
string commandText1 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:01';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
string commandText2 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:05';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
string commandText3 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:10';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
try
// For each process, open a connection and begin
// execution. Use the IAsyncResult object returned by
// BeginExecuteReader to add a WaitHandle for the
// process to the array.
{
connection1.Open();
SqlCommand command1 =
new SqlCommand(commandText1, connection1);
IAsyncResult result1 = command1.BeginExecuteNonQuery();
WaitHandle waitHandle1 = result1.AsyncWaitHandle;
connection2.Open();
SqlCommand command2 =
new SqlCommand(commandText2, connection2);
IAsyncResult result2 = command2.BeginExecuteNonQuery();
WaitHandle waitHandle2 = result2.AsyncWaitHandle;
connection3.Open();
SqlCommand command3 =
new SqlCommand(commandText3, connection3);
IAsyncResult result3 = command3.BeginExecuteNonQuery();
WaitHandle waitHandle3 = result3.AsyncWaitHandle;
WaitHandle[] waitHandles = {
waitHandle1, waitHandle2, waitHandle3
};
bool result;
// WaitAll waits for all of the processes to
// complete. The return value is True if the processes
// all completed successfully, False if any process
// timed out.
result = WaitHandle.WaitAll(waitHandles, 60000, false);
if(result)
{
long rowCount1 =
command1.EndExecuteNonQuery(result1);
TextBox1.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
long rowCount2 =
command2.EndExecuteNonQuery(result2);
TextBox2.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
long rowCount3 =
command3.EndExecuteNonQuery(result3);
TextBox3.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
}
else
{
throw new Exception("Timeout");
}
}
catch (Exception ex)
{
TextBox4.Text = ex.ToString();
}
connection1.Close();
connection2.Close();
connection3.Close();
}