Bewerken

Share via


Graphics.SetClip Method

Definition

Sets the clipping region of this Graphics to the Clip property of the specified Graphics.

Overloads

SetClip(Region, CombineMode)

Sets the clipping region of this Graphics to the result of the specified operation combining the current clip region and the specified Region.

SetClip(RectangleF, CombineMode)

Sets the clipping region of this Graphics to the result of the specified operation combining the current clip region and the rectangle specified by a RectangleF structure.

SetClip(Rectangle, CombineMode)

Sets the clipping region of this Graphics to the result of the specified operation combining the current clip region and the rectangle specified by a Rectangle structure.

SetClip(Graphics, CombineMode)

Sets the clipping region of this Graphics to the result of the specified combining operation of the current clip region and the Clip property of the specified Graphics.

SetClip(GraphicsPath, CombineMode)

Sets the clipping region of this Graphics to the result of the specified operation combining the current clip region and the specified GraphicsPath.

SetClip(RectangleF)

Sets the clipping region of this Graphics to the rectangle specified by a RectangleF structure.

SetClip(Rectangle)

Sets the clipping region of this Graphics to the rectangle specified by a Rectangle structure.

SetClip(Graphics)

Sets the clipping region of this Graphics to the Clip property of the specified Graphics.

SetClip(GraphicsPath)

Sets the clipping region of this Graphics to the specified GraphicsPath.

SetClip(Region, CombineMode)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the result of the specified operation combining the current clip region and the specified Region.

public:
 void SetClip(System::Drawing::Region ^ region, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Region region, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Region * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (region As Region, combineMode As CombineMode)

Parameters

region
Region

Region to combine.

combineMode
CombineMode

Member from the CombineMode enumeration that specifies the combining operation to use.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler. The code performs the following actions:

  • Creates a small rectangle for the clipping region.

  • Sets the clipping region to the rectangle with the Replace member.

  • Fills a large rectangle with a solid black brush.

The result is a small, filled, black rectangle.

public:
   void SetClipRegionCombine( PaintEventArgs^ e )
   {
      // Create region for clipping.
      System::Drawing::Region^ clipRegion = gcnew System::Drawing::Region( Rectangle(0,0,100,100) );

      // Set clipping region of graphics to region.
      e->Graphics->SetClip( clipRegion, CombineMode::Replace );

      // Fill rectangle to demonstrate clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void SetClipRegionCombine(PaintEventArgs e)
{

    // Create region for clipping.
    Region clipRegion = new Region(new Rectangle(0, 0, 100, 100));

    // Set clipping region of graphics to region.
    e.Graphics.SetClip(clipRegion, CombineMode.Replace);

    // Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRegionCombine(ByVal e As PaintEventArgs)

    ' Create region for clipping.
    Dim clipRegion As New [Region](New Rectangle(0, 0, 100, 100))

    ' Set clipping region of graphics to region.
    e.Graphics.SetClip(clipRegion, CombineMode.Replace)

    ' Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

Applies to

SetClip(RectangleF, CombineMode)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the result of the specified operation combining the current clip region and the rectangle specified by a RectangleF structure.

public:
 void SetClip(System::Drawing::RectangleF rect, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.RectangleF rect, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.RectangleF * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (rect As RectangleF, combineMode As CombineMode)

Parameters

rect
RectangleF

RectangleF structure to combine.

combineMode
CombineMode

Member of the CombineMode enumeration that specifies the combining operation to use.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler. The code performs the following actions:

  • Creates a small rectangle for the clipping region.

  • Sets the clipping region to the rectangle with the Replace member.

  • Fills a large rectangle with a solid black brush.

The result is a small, filled, black rectangle.

public:
   void SetClipRectangleFCombine( PaintEventArgs^ e )
   {
      // Create rectangle for clipping region.
      RectangleF clipRect = RectangleF(0.0F,0.0F,100.0F,100.0F);

      // Set clipping region of graphics to rectangle.
      e->Graphics->SetClip( clipRect, CombineMode::Replace );

      // Fill rectangle to demonstrate clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void SetClipRectangleFCombine(PaintEventArgs e)
{

    // Create rectangle for clipping region.
    RectangleF clipRect = new RectangleF(0.0F, 0.0F, 100.0F, 100.0F);

    // Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect, CombineMode.Replace);

    // Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleFCombine(ByVal e As PaintEventArgs)

    ' Create rectangle for clipping region.
    Dim clipRect As New RectangleF(0.0F, 0.0F, 100.0F, 100.0F)

    ' Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect, CombineMode.Replace)

    ' Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

Applies to

SetClip(Rectangle, CombineMode)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the result of the specified operation combining the current clip region and the rectangle specified by a Rectangle structure.

public:
 void SetClip(System::Drawing::Rectangle rect, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Rectangle rect, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Rectangle * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (rect As Rectangle, combineMode As CombineMode)

Parameters

rect
Rectangle

Rectangle structure to combine.

combineMode
CombineMode

Member of the CombineMode enumeration that specifies the combining operation to use.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler. The code performs the following actions:

  • Creates a small rectangle for the clipping region.

  • Sets the clipping region to the rectangle with the Replace member.

  • Fills a large rectangle with a solid black brush.

The result is a small, filled, black rectangle.

public:
   void SetClipRectangleCombine( PaintEventArgs^ e )
   {
      // Create rectangle for clipping region.
      Rectangle clipRect = Rectangle(0,0,100,100);

      // Set clipping region of graphics to rectangle.
      e->Graphics->SetClip( clipRect, CombineMode::Replace );

      // Fill rectangle to demonstrate clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void SetClipRectangleCombine(PaintEventArgs e)
{

    // Create rectangle for clipping region.
    Rectangle clipRect = new Rectangle(0, 0, 100, 100);

    // Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect, CombineMode.Replace);

    // Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleCombine(ByVal e As PaintEventArgs)

    ' Create rectangle for clipping region.
    Dim clipRect As New Rectangle(0, 0, 100, 100)

    ' Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect, CombineMode.Replace)

    ' Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

Applies to

SetClip(Graphics, CombineMode)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the result of the specified combining operation of the current clip region and the Clip property of the specified Graphics.

public:
 void SetClip(System::Drawing::Graphics ^ g, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Graphics g, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Graphics * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (g As Graphics, combineMode As CombineMode)

Parameters

g
Graphics

Graphics that specifies the clip region to combine.

combineMode
CombineMode

Member of the CombineMode enumeration that specifies the combining operation to use.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler, as well as thisForm, the Form for the example. The code performs the following actions:

  • Creates a temporary Graphics from the thisForm Form of the example.

  • Sets the clipping region of the temporary Graphics to a small square.

  • Updates the clipping region of the form's graphic object to that of the new Graphics with the Replace member.

  • Fills a large rectangle with a solid black brush.

The result is a small, filled, black square.

public:
   void SetClipGraphicsCombine( PaintEventArgs^ e )
   {
      // Create temporary graphics object and set its clipping region.
      Graphics^ newGraphics = this->CreateGraphics();
      newGraphics->SetClip( Rectangle(0,0,100,100) );

      // Update clipping region of graphics to clipping region of new
      // graphics.
      e->Graphics->SetClip( newGraphics, CombineMode::Replace );

      // Fill rectangle to demonstrate clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );

      // Release new graphics.
      delete newGraphics;
   }
private void SetClipGraphicsCombine(PaintEventArgs e)
{

    // Create temporary graphics object and set its clipping region.
    Graphics newGraphics = this.CreateGraphics();
    newGraphics.SetClip(new Rectangle(0, 0, 100, 100));

    // Update clipping region of graphics to clipping region of new

    // graphics.
    e.Graphics.SetClip(newGraphics, CombineMode.Replace);

    // Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);

    // Release new graphics.
    newGraphics.Dispose();
}
Private Sub SetClipGraphicsCombine(ByVal e As PaintEventArgs)

    ' Create temporary graphics object and set its clipping region.
    Dim newGraphics As Graphics = Me.CreateGraphics()
    newGraphics.SetClip(New Rectangle(0, 0, 100, 100))

    ' Update clipping region of graphics to clipping region of new

    ' graphics.
    e.Graphics.SetClip(newGraphics, CombineMode.Replace)

    ' Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)

    ' Release new graphics.
    newGraphics.Dispose()
End Sub

Applies to

SetClip(GraphicsPath, CombineMode)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the result of the specified operation combining the current clip region and the specified GraphicsPath.

public:
 void SetClip(System::Drawing::Drawing2D::GraphicsPath ^ path, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Drawing2D.GraphicsPath path, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Drawing2D.GraphicsPath * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (path As GraphicsPath, combineMode As CombineMode)

Parameters

path
GraphicsPath

GraphicsPath to combine.

combineMode
CombineMode

Member of the CombineMode enumeration that specifies the combining operation to use.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler. The code performs the following actions:

  • Creates a graphics path and adds an ellipse to the path.

  • Sets the clipping region to the elliptical path with the Replace member.

  • Fills a large rectangle with a solid black brush.

The result is a filled, black ellipse.

public:
   void SetClipPathCombine( PaintEventArgs^ e )
   {
      // Create graphics path.
      GraphicsPath^ clipPath = gcnew GraphicsPath;
      clipPath->AddEllipse( 0, 0, 200, 100 );

      // Set clipping region to path.
      e->Graphics->SetClip( clipPath, CombineMode::Replace );

      // Fill rectangle to demonstrate clipping region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void SetClipPathCombine(PaintEventArgs e)
{

    // Create graphics path.
    GraphicsPath clipPath = new GraphicsPath();
    clipPath.AddEllipse(0, 0, 200, 100);

    // Set clipping region to path.
    e.Graphics.SetClip(clipPath, CombineMode.Replace);

    // Fill rectangle to demonstrate clipping region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipPathCombine(ByVal e As PaintEventArgs)

    ' Create graphics path.
    Dim clipPath As New GraphicsPath
    clipPath.AddEllipse(0, 0, 200, 100)

    ' Set clipping region to path.
    e.Graphics.SetClip(clipPath, CombineMode.Replace)

    ' Fill rectangle to demonstrate clipping region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

Remarks

If the graphics path represented by the path parameter is not closed, an additional segment is added from the last point to the first point to close the path.

Applies to

SetClip(RectangleF)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the rectangle specified by a RectangleF structure.

public:
 void SetClip(System::Drawing::RectangleF rect);
public void SetClip (System.Drawing.RectangleF rect);
member this.SetClip : System.Drawing.RectangleF -> unit
Public Sub SetClip (rect As RectangleF)

Parameters

rect
RectangleF

RectangleF structure that represents the new clip region.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler. The code performs the following actions:

  • Creates a small rectangle for the clipping region.

  • Sets the clipping region to the rectangle.

  • Fills a large rectangle with a solid black brush.

The result is a small, filled, black rectangle.

public:
   void SetClipRectangleF( PaintEventArgs^ e )
   {
      // Create rectangle for clipping region.
      RectangleF clipRect = RectangleF(0.0F,0.0F,100.0F,100.0F);

      // Set clipping region of graphics to rectangle.
      e->Graphics->SetClip( clipRect );

      // Fill rectangle to demonstrate clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void SetClipRectangleF(PaintEventArgs e)
{

    // Create rectangle for clipping region.
    RectangleF clipRect = new RectangleF(0.0F, 0.0F, 100.0F, 100.0F);

    // Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect);

    // Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleF(ByVal e As PaintEventArgs)

    ' Create rectangle for clipping region.
    Dim clipRect As New RectangleF(0.0F, 0.0F, 100.0F, 100.0F)

    ' Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect)

    ' Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

Applies to

SetClip(Rectangle)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the rectangle specified by a Rectangle structure.

public:
 void SetClip(System::Drawing::Rectangle rect);
public void SetClip (System.Drawing.Rectangle rect);
member this.SetClip : System.Drawing.Rectangle -> unit
Public Sub SetClip (rect As Rectangle)

Parameters

rect
Rectangle

Rectangle structure that represents the new clip region.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler. The code performs the following actions:

  • Creates a small rectangle for the clipping region.

  • Sets the clipping region to the rectangle.

  • Fills a large rectangle with a solid black brush.

The result is a small, filled, black rectangle.

public:
   void SetClipRectangle( PaintEventArgs^ e )
   {
      // Create rectangle for clipping region.
      Rectangle clipRect = Rectangle(0,0,100,100);

      // Set clipping region of graphics to rectangle.
      e->Graphics->SetClip( clipRect );

      // Fill rectangle to demonstrate clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void SetClipRectangle(PaintEventArgs e)
{

    // Create rectangle for clipping region.
    Rectangle clipRect = new Rectangle(0, 0, 100, 100);

    // Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect);

    // Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangle(ByVal e As PaintEventArgs)

    ' Create rectangle for clipping region.
    Dim clipRect As New Rectangle(0, 0, 100, 100)

    ' Set clipping region of graphics to rectangle.
    e.Graphics.SetClip(clipRect)

    ' Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

Applies to

SetClip(Graphics)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the Clip property of the specified Graphics.

public:
 void SetClip(System::Drawing::Graphics ^ g);
public void SetClip (System.Drawing.Graphics g);
member this.SetClip : System.Drawing.Graphics -> unit
Public Sub SetClip (g As Graphics)

Parameters

g
Graphics

Graphics from which to take the new clip region.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler, as well as thisForm, the Form for the example. The code performs the following actions:

  • Creates a temporary Graphics from the thisForm Form of the example.

  • Sets the clipping region of the temporary Graphics to a small square.

  • Updates the clipping region of the form's graphic object to that of the temporary Graphics.

  • Fills a large rectangle with a solid black brush.

The result is a small, filled, black square.

public:
   void SetClipGraphics( PaintEventArgs^ e )
   {
      // Create temporary graphics object and set its clipping region.
      Graphics^ newGraphics = this->CreateGraphics();
      newGraphics->SetClip( Rectangle(0,0,100,100) );

      // Update clipping region of graphics to clipping region of new
      // graphics.
      e->Graphics->SetClip( newGraphics );

      // Fill rectangle to demonstrate clip region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );

      // Release new graphics.
      delete newGraphics;
   }
private void SetClipGraphics(PaintEventArgs e)
{

    // Create temporary graphics object and set its clipping region.
    Graphics newGraphics = this.CreateGraphics();
    newGraphics.SetClip(new Rectangle(0, 0, 100, 100));

    // Update clipping region of graphics to clipping region of new

    // graphics.
    e.Graphics.SetClip(newGraphics);

    // Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);

    // Release new graphics.
    newGraphics.Dispose();
}
Private Sub SetClipGraphics(ByVal e As PaintEventArgs)

    ' Create temporary graphics object and set its clipping region.
    Dim newGraphics As Graphics = Me.CreateGraphics()
    newGraphics.SetClip(New Rectangle(0, 0, 100, 100))

    ' Update clipping region of graphics to clipping region of new

    ' graphics.
    e.Graphics.SetClip(newGraphics)

    ' Fill rectangle to demonstrate clip region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)

    ' Release new graphics.
    newGraphics.Dispose()
End Sub

Applies to

SetClip(GraphicsPath)

Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs
Source:
Graphics.cs

Sets the clipping region of this Graphics to the specified GraphicsPath.

public:
 void SetClip(System::Drawing::Drawing2D::GraphicsPath ^ path);
public void SetClip (System.Drawing.Drawing2D.GraphicsPath path);
member this.SetClip : System.Drawing.Drawing2D.GraphicsPath -> unit
Public Sub SetClip (path As GraphicsPath)

Parameters

path
GraphicsPath

GraphicsPath that represents the new clip region.

Examples

The following code example is designed for use with Windows Forms, and it requires PaintEventArgs e, which is a parameter of the Paint event handler. The code performs the following actions:

  • Creates a graphics path and adds an ellipse to the path.

  • Sets the clipping region to the elliptical path.

  • Fills a large rectangle with a solid black brush.

The result is a filled, black ellipse.

public:
   void SetClipPath( PaintEventArgs^ e )
   {
      // Create graphics path.
      GraphicsPath^ clipPath = gcnew GraphicsPath;
      clipPath->AddEllipse( 0, 0, 200, 100 );

      // Set clipping region to path.
      e->Graphics->SetClip( clipPath );

      // Fill rectangle to demonstrate clipping region.
      e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
   }
private void SetClipPath(PaintEventArgs e)
{

    // Create graphics path.
    GraphicsPath clipPath = new GraphicsPath();
    clipPath.AddEllipse(0, 0, 200, 100);

    // Set clipping region to path.
    e.Graphics.SetClip(clipPath);

    // Fill rectangle to demonstrate clipping region.
    e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipPath(ByVal e As PaintEventArgs)

    ' Create graphics path.
    Dim clipPath As New GraphicsPath
    clipPath.AddEllipse(0, 0, 200, 100)

    ' Set clipping region to path.
    e.Graphics.SetClip(clipPath)

    ' Fill rectangle to demonstrate clipping region.
    e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
    500, 300)
End Sub

Remarks

If the graphics path represented by the path parameter is not closed, an additional segment is added from the last point to the first point to close the path.

Applies to