Dimensions and measurements available in Call Quality Dashboard (CQD)

Artikel
06/17/2024
Van toepassing op:

Skype for Business, Microsoft Teams

The Call Quality Dashboard (CQD) for Microsoft Teams allows you to understand the quality of calls made with these services. This article describes the dimensions and measurements visible through CQD. To learn more about CQD, see Use CQD to manage call and meeting quality in Microsoft Teams.

First and Second endpoint classification

Many of the dimensions and measurements in CQD are labeled as first or second. The following logic determines which endpoint involved in the stream or call is labeled as first:

A server endpoint (AV MCU, Mediation Server, and so on) is considered first when a server is involved in the stream or call.
A client endpoint is considered second unless the stream is between two server endpoints.
If both endpoints are the same type, first versus second is set based on internal ordering of the user agent category to ensure that the ordering is consistent.

In the following example, each row represents a pair of User Agents involved in a stream:

User Agent Category of Caller	User Agent Category of Callee	First Endpoint	Second Endpoint	First Is Caller
AV-MCU	OC (Skype for Business client)	AV-MCU	OC (Skype for Business client)	TRUE
OC (Skype for Business client)	AV-MCU	AV-MCU	OC (Skype for Business client)	FALSE
OC (Skype for Business client)	OC (Skype for Business client)	OC (Skype for Business client)	OC (Skype for Business client)	FALSE
AV-MCU	Mediation Server	Mediation Server	AV-MCU
Mediation Server	AV-MCU	Mediation Server	AV-MCU	TRUE
OC (Skype for Business client)	OC Phone (Skype for Business IP Phone)	OC (Skype for Business client)	OC Phone (Skype for Business IP Phone)	TRUE
OC Phone (Skype for Business IP Phone)	OC (Skype for Business client)	OC (Skype for Business client)	OC Phone (Skype for Business IP Phone)	FALSE

Note

That first and second classification is separate from which endpoint is the caller or callee. The First Is Caller dimension can be used to help identify which endpoint is the caller or callee.

Dimensions

Dimensions information is based in part on data uploaded to the CQD portal. Many Dimension values can also be used as filters.

Dimension data types and units

Boolean

Boolean values are always either True or False. In some cases, True can be represented as 1, and False can be represented as 0.

Range

Dimensions that are provided as range or group of values are shown using the following format:

<sort order string> [<lower bound inclusive> - <upper bound exclusive>

For example, the Duration (Minutes) dimension represents the call duration in seconds with the value reported as a range of values.

Duration (Minutes)	How to interpret
062: [0 - 0)	Stream duration = 0 minutes
064: [1 - 2)	1 minute < = stream duration < 2 minutes
065: [2 - 3)	2 minutes < = stream duration < 3 minutes
066: [3–4)	3 minutes < = stream duration < 4 minutes

The <sort order string> is used to control the sort order when presenting the data and can be used for filtering. For example, a filter on Duration (Minutes) < "065", would show streams with duration less than 2 minutes (The leading '0' is needed for the filter to work as expected). The actual value of the sort order string isn't significant.

Note

You might notice ranges that seem to be invalid for a given dimension. An example is Wifi Signal Strength showing calls in the 082: [100 - 110) range when 100 is the maximum possible value. This range is due to how numbers are assigned to ranges in CQD's data model. If a whole number value is 99, it's counted in the 081: [90 - 100) range. If that value is 100, it's counted in the 082: [100 - 110) range. This doesn't indicate that there are Wifi Signal Strength values greater than 100% being reported.

Enumeration strings

Strings used by CQD are often derived from data files, and these strings can be any combination of character within the allowed length. Some dimensions look like strings, but since they can only be one of a short list of predefined values, they're enumerations and not true strings. Some enumerations strings are also used in pairs.

Enumeration pair

Dimensions that are provided as an enumeration pair are shown using the following format:

<enumeration value from one end point> : <enumeration value from the other endpoint>

The ordering of the enumeration values is consistent but doesn't reflect ordering of the first or second endpoints.

For example, the Network Connection Detail Pair shows the Network Connection Detail values for the two endpoints:

Network Connection Detail Pair	How to interpret
Wired : Wired	First and second endpoints both used wired ethernet connections.
Wired : wifi	One endpoint used a wired ethernet connection and the other endpoint used a Wi-Fi connection.
: wifi	One endpoint used a WiFi connection and the network connection used by the other endpoint is unknown.

Blank values

The table below describes why a dimension might be blank. Many dimensions and measurements are blank if the QoE Record Available dimension is false. Missing QoE typically occurs when the call isn't successfully established, or when the client fails to send its telemetry to the service.

Available dimensions

The following table lists the dimensions currently available in CQD, in the order listed in the Query Editor used to create reports or edit previously defined reports.

Name	Data type	Description	Possible Reasons for blank values
Endpoint
First CPU Name	String	Name of the CPU used by the first endpoint. Example value: Contoso CPU X11 @ 1.80 GHz	• The endpoint didn't report this data
Second CPU Name	String	Name of the CPU used by the second endpoint. Example value: Contoso CPU X11 @ 1.80 GHz	• The endpoint didn't report this data
First CPU Number Of Cores	Number of cores	Number of CPU cores available on the first endpoint. Example value: 8	• The endpoint didn't report this data
Second CPU Number Of Cores	Number of cores	Number of CPU cores available on the second endpoint. Example value: 8	• The endpoint didn't report this data
First CPU Processor Speed	CPU speed in MHz	Speed in MHz of the CPU used by the first endpoint. Example value: 1800	• The endpoint didn't report this data
Second CPU Processor Speed	CPU speed in MHz	Speed in MHz of the CPU used by the second endpoint. Example value: 1800	• The endpoint didn't report this data
First Endpoint	String	Machine name reported by the first endpoint if the endpoint is a server or a cloud service client. Example value: MACHINENAME	• The endpoint didn't report this data
Second Endpoint	String	Machine name reported by the second endpoint if the endpoint is a server or a cloud service client. Example value: MACHINENAME	• The endpoint didn't report this data
First OS	String	Full Operating System and architecture string reported by the first endpoint. Example value: Windows 10.0.14996 SP: 0.0 Type: 1(Workstation) Suite: 256 Arch: x64 WOW64: True	• The endpoint didn't report this data
Second OS	String	Full Operating System and architecture string reported by the second endpoint. Example value: Windows 10.0.14996 SP: 0.0 Type: 1(Workstation) Suite: 256 Arch: x64 WOW64: True	• The endpoint didn't report this data
First OS Filtered	String	Operating System name and major and minor version reported by the first endpoint. This string can contain more than the OS name and version. Example value: Windows 10	• The endpoint didn't report this information • The report from this endpoint wasn't received.
Second OS Filtered	String	Operating System name and major and minor version reported by the second endpoint. This string can contain more than the OS name and version. Example value: Windows 10	• The endpoint didn't report this information • The report from this endpoint wasn't received
First OS Architecture	String	Hardware architecture reported by the first endpoint. Example value: x64	• The endpoint didn't report this information • The report from this endpoint wasn't received • The format of the architecture wasn't recognized
Second OS Architecture	String	Hardware architecture reported by the second endpoint. Example value: x64	• The endpoint didn't report this information • The report from this endpoint wasn't received • The format of the architecture wasn't recognized
First Virtualization Flag	Enumeration Possible values: "0x00" = None "0x01" = Hyper-V "0x02" = VMware "0x04" = Virtual PC "0x08" = Xen PC	Flag that indicates the type of virtualization environment reported by the first Skype for Business endpoint. Microsoft Teams endpoints only report 0 or 1 in this field. We recommend using the VDI dimensions for Microsoft Teams deployments.	• The endpoint didn't report this data
Second Virtualization Flag	Enumeration Possible values: "0x00" = None "0x01" = Hyper-V "0x02" = VMware "0x04" = Virtual PC "0x08" = Xen PC	Flag that indicates the type of virtualization environment reported by the second Skype for Business endpoint. Microsoft Teams endpoints only report 0 or 1 in this field. We recommend using the VDI dimensions for Microsoft Teams deployments.	• The endpoint didn't report this data
First VTC Device Name	String	The friendly name of the VTC device used by the first endpoint	• The endpoint didn't report this data • Field is EUII and 28 days has passed
Second VTC Device Name	String	The friendly name of the VTC device used by the second endpoint	• The endpoint didn't report this data • Field is EUII and 28 days has passed
First VTC Device Detail	String	The platform and version information of the VTC device used by the first endpoint Example value: Tandberg, 529	• The endpoint didn't report this data
Second VTC Device Detail	String	The platform and version information of the VTC device used by the second endpoint Example value: Tandberg, 529	• The endpoint didn't report this data
First Media Bypass	Boolean	Indicates if the audio stream was bypassing the Teams service endpoint and flowing directly between the session border controller and first endpoint.	• Stream wasn't destined for a PSTN endpoint. • Stream wasn't an audio stream.
Second Media Bypass	Boolean	Indicates if the audio stream was bypassing the Teams service endpoint and flowing directly between the session border controller and second endpoint.	• Stream wasn't destined for a PSTN endpoint. • Stream wasn't an audio stream.
First Endpoint Make	String	Device manufacturer, information is read from an Endpoint Data file EndpointMake field.	• No data file for the endpoint
First Endpoint Model	String	Device model, information is read from an Endpoint Data file EndpointModel field.	• No data file for the endpoint
First Endpoint Type	String	Device type, information is read from an Endpoint Data file EndpointType field.	• No data file for the endpoint
First Endpoint Label 1	String	A customizable label, information is read from an Endpoint Data file.	• No data file for the endpoint
First Endpoint Label 2	String	A customizable label, information is read from an Endpoint Data file.	• No data file for the endpoint
First Endpoint Label 3	String	A customizable label, information is read from an Endpoint Data file.	• No data file for the endpoint
Second Endpoint Make	String	Device manufacturer, information is read from an Endpoint Data file EndpointName field.	• No data file for the endpoint
Second Endpoint Model	String	Device model, information is read from an Endpoint Data file EndpointModel field.	• No data file for the endpoint
Second Endpoint Type	String	Device type, information is read from an Endpoint Data file EndpointType field.	• No data file for the endpoint
Second Endpoint Label 1	String	A customizable label, information is read from an Endpoint Data file.	• No data file for the endpoint
Second Endpoint Label 2	String	A customizable label, information is read from an Endpoint Data file.	• No data file for the endpoint
Second Endpoint Label 3	String	A customizable label, information is read from an Endpoint Data file.	• No data file for the endpoint
First ASN	String	Autonomous system number for the first endpoint. Example value: 8069	• Network data wasn't available to determine endpoint ASN
Second ASN	String	Autonomous system number for the second endpoint. Example value: 8069	• Network data wasn't available to determine endpoint ASN
First ASN ISP Name	String	Name of the ASN holder -- usually an internet service provider or ISP -- for the autonomous system number of the first endpoint. Example value Microsoft Corporation	• Network data wasn't available to determine endpoint ASN
Second ASN ISP Name	String	Name of the ASN holder -- usually an internet service provider or ISP -- for the autonomous system number of the second endpoint. Example value: Microsoft Corporation	• Network data wasn't available to determine endpoint ASN
First ASN Country Code	String	Country code for the Autonomous System Number determined for the first endpoint. Example value: US	• Network data wasn't available to determine endpoint ASN
Second ASN Country Code	String	Country code for the Autonomous System Number determined for the second endpoint. Example value: US	• Network data wasn't available to determine endpoint ASN
First ASN Country	String	Country name for the Autonomous System Number determined for the first endpoint. Example value: United States	• Network data wasn't available to determine endpoint ASN
Second ASN Country	String	Country name for the Autonomous System Number determined for the second endpoint. Example value: United States	• Network data wasn't available to determine endpoint ASN
First ASN City	String	City name for the Autonomous System Number determined for the first endpoint. Example value: Redmond	• Network data wasn't available to determine endpoint ASN
Second ASN City	String	City name for the Autonomous System Number determined for the second endpoint. Example value: Redmond	• Network data wasn't available to determine endpoint ASN
First ASN State	String	State name for the Autonomous System Number determined for the first endpoint. Example value: WA	• Network data wasn't available to determine endpoint ASN
Second ASN State	String	State name for the Autonomous System Number determined for the second endpoint. Example value: WA	• Network data wasn't available to determine endpoint ASN
Building
First Network	String	Subnet used for media stream by the first endpoint if the subnet exists in subnet to tenant building data. Example value: 10.0.1.12.0	• The endpoint didn't report network data • Network isn't defined in subnet-mapping data.
First Network Name	String	Name of network used for media stream by first endpoint. Based on mapping subnet to tenant building data. Example value: USA/WA/REDMOND	• The endpoint didn't report network data • Network isn't defined in subnet-mapping data
First Network Range	String	Network prefix/range of the subnet used for the media stream by the first endpoint, based on data-mapping subnet to tenant building. Example value: 24	• The endpoint didn't report network data • Network isn't defined in subnet-mapping data
First Building Name	String	Name of the building where the first endpoint was located based on mapping subnet to tenant building data. Example value: Main	• The endpoint didn't report network data • Network isn't defined in subnet-mapping data
First Ownership Type	String	Ownership type of the building where the first endpoint was located. Based on mapping subnet to tenant building data. Example value: Contoso-IT	• The endpoint didn't report network data • Network isn't within the corporate network or network ownership isn't defined in subnet-mapping data
First Building Type	String	Type of building where the first endpoint was located based on mapping subnet to tenant building data. Example value: Open Office	• The endpoint didn't report network data • Network isn't within corporate network • Network building type isn't defined in subnet-mapping data
First Building Office Type	String	Type of building where the first endpoint was located based on mapping subnet to tenant building data. Example value: Open Office	• The endpoint didn't report network data • Network isn't within corporate network • Network building type isn't defined in subnet-mapping data
First City	String	City where the first endpoint was located based on mapping subnet to tenant building data. Example value: Redmond	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a city defined in subnet-mapping data
First Zip Code	String	Zip/Postal code where the first endpoint was located based on mapping subnet to tenant building data. Example value: 98052	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a zip code defined in subnet-mapping data
First Country	String	Country where the first endpoint was located based on mapping subnet to tenant building data. Example value: USA	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a country defined in subnet-mapping data
First State	String	State where the first endpoint was located based on mapping subnet to tenant building data. Example value: WA	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a State defined in subnet-mapping data.
First Region	String	Region where the first endpoint was located based on mapping subnet to tenant building data. Example value: North America	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a region defined in subnet-mapping data.
First Express Route	Boolean	True if the subnet used for the media stream by the first endpoint is enabled for Azure ExpressRoute, based on mapping subnet to tenant building data. You can customize usage for other purposes if you decide to.	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have an ExpressRoute flag set in subnet-mapping data.
First Network Mapped VPN	Boolean	True if the subnet used for the media stream by the first endpoint is a VPN subnet, based on mapping subnet to tenant building data.	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a VPN flag set in subnet-mapping data.
Second Network	String	Subnet used for media stream by second endpoint if subnet exists in subnet to tenant building data. Example value: 10.0.1.12.0	• The endpoint didn't report network data • Network isn't defined in subnet-mapping data
Second Network Name	String	Name of the network used for the media stream by the second endpoint, based on mapping subnet to tenant building data. Example value: USA/ WA/ REDMOND	• The endpoint didn't report network data • Network doesn't have a network name defined in subnet-mapping data
Second Network Range	String	Network prefix/range of the subnet used for the media stream by the second endpoint, based on mapping subnet to tenant building data. Example value: 24	• The endpoint didn't report network data • Network doesn't have a network range defined in subnet-mapping data
Second Building Name	String	Name of the building where the second endpoint is located based on mapping subnet to tenant building data. Example value: Main	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a building name defined in subnet-mapping data
Second Ownership Type	String	Ownership type of building where the second endpoint is located based on mapping subnet to tenant building data. Example value: Contoso — IT	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have ownership defined in subnet-mapping data
Second Building Type	String	Type of building where the second endpoint is located based on mapping subnet to tenant building data. Example value: Open Office	• The endpoint didn't report network data • Network isn't within corporate network • Network building type isn't defined in subnet-mapping data
Second Building Office Type	String	Office building type where the second endpoint is located based on mapping subnet to tenant building data. Example value: Office	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a building office type defined in subnet-mapping data.
Second City	String	City where the second endpoint is located based on mapping subnet to tenant building data. Example value: Redmond	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a city defined in subnet-mapping data
Second Zip Code	String	Zip/Postal code where the second endpoint is located based on mapping subnet to tenant building data. Example value: 98052	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a zip code defined in subnet-mapping data
Second Country	String	Country where the second endpoint is located based on mapping subnet to tenant building data. Example value: USA	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have country defined in subnet-mapping data
Second State	String	State where the second endpoint is located based on mapping subnet to tenant building data. Example value: WA	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a state defined in subnet-mapping data
Second Region	String	Region where the second endpoint is located based on mapping subnet to tenant building data. Example value: North America	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have region defined in subnet-mapping data.
Second Express Route	Boolean	True if the subnet used for the media stream by the second endpoint is enabled for ExpressRoute, based on mapping subnet to tenant building data.	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have an ExpressRoute flag set in subnet-mapping data
Second Network Mapped VPN	Boolean	True if the subnet used for the media stream by the second endpoint is a VPN subnet, based on mapping subnet to tenant building data.	• The endpoint didn't report network data • Network isn't within corporate network • Network doesn't have a VPN flag set in subnet-mapping data.
First Inside Corp	Enumeration Possible values: Inside, Outside	Indicates if the first endpoint is on a subnet within the corporate network, based on mapping subnet to tenant building data. By default, the endpoint is considered Outside. Example value: Inside
Second Inside Corp	Enumeration Possible values: Inside, Outside	Indicates if the second endpoint is on a subnet within the corporate network, based on mapping subnet to tenant building data. By default, the endpoint is considered Outside. Example value: Inside
Deployment
First Tenant Id	String	Tenant ID for the first endpoint. Example value: 00000000 — 0000 -0000 - 0000 — 000000000000	• Tenant ID for the first endpoint couldn't be determined. A blank value here might indicate that the endpoint is signed in to an on-premises Skype for Business Server deployment.
Second Tenant Id	String	Tenant ID for the second endpoint. Example value: 00000000 — 0000 - 0000 - 0000 — 000000000000	• Tenant ID for the second endpoint couldn't be determined. A blank value here might indicate that the endpoint is signed in to an on-premises Skype for Business Server deployment.
First Pool	String	Skype for Business Online pool FQDN assigned to the first endpoint. Example value: pool1.lync.com	• Indicates that the endpoint is signed in to a Microsoft Teams or Skype for Business. This field only populates for streams using on-premises Skype for Business Server deployments.
Second Pool	String	Skype for Business Online pool FQDN assigned to the second endpoint. Example value: pool1.lync.com	• Skype for Business Online pool couldn't be determined for the second endpoint. A blank value here might indicate that the endpoint is signed in to an on-premises Skype for Business Server deployment.
Is Federated	Boolean	True if streams are between two federated tenants, False otherwise.	• It couldn't be determined if the stream is federated • Some signaling data isn't collected
Region	String	Region where the deployment is located based on the home region of the tenant. Example value: North America	• Network data not reported • Network isn't within corporate network • Network doesn't have region defined in subnet-mapping data.
Stream
QoE Record Available	Boolean	True if at least one Quality of Experience report is available for call/session. Many dimensions and measurements are available only if a QoE record is available. If the call setup fails, a QoE record won't be available.
CDR Record Available	Boolean	True if at least one Call Detail Records is available for call/session.
Media Line Label	Integer	Label in SDP for media line. Use Media Type to determine if label is used for video, audio, app sharing, or video based screen sharing. Example value: 0	• The endpoint didn't report this data.
Media Type	String	Type of media (video, audio, app sharing, or video based screen sharing). Example value: Audio
Media Line Label Text	String	The Session Description Protocol (SDP) Label Attribute of the media line corresponding to the stream. See RFC 4574 for more detailed info. Example values: main-audio main-video main-video1 main-video2 main-video3 main-video4 main-video5 main-video6 main-video7 main-video8 main-video9 panoramic-video applicationsharing-video data
First Is Server	Enumeration Possible values: • Client • Server	Indicates if the first endpoint is a server endpoint, or a client endpoint. Types of servers include conferencing servers and mediation servers.
Second Is Server	Enumeration Possible values: • Client • Server	Indicates if the second endpoint is a server endpoint, or a client endpoint. Types of servers include conferencing servers and mediation servers.
First Is Caller	Boolean	True if the first endpoint is the caller who initiated the session.
First Network Connection Detail	Enumeration Possible values: • Wired • WiFi • MobileBB • Tunnel • Other	Type of network used by the first endpoint. Example value: Wired	• The endpoint didn't report data
Second Network Connection Detail	Enumeration Possible values: • Wired • WiFi • MobileBB • Tunnel • Other	Type of network used by the second endpoint. Example value: Wired	• The endpoint didn't report data
Stream Direction	Enumeration Possible values: • First-to-Second • Second-to-First	Indicates the direction of a stream. • Example value: First-to-Second	• No data was reported to indicate the direction of the stream
Payload Description	String	Name of last codec used in the stream. Example value: SILKWide	• No data is available
Audio and Video Call	Boolean	True if call had both audio and video streams, False otherwise	• No data was reported to indicate the media types of the stream.
First QoE Record Available	Boolean	True if the QoE Record for the first endpoint is reported to CQD.
Second QoE Record Available	Boolean	True if the QoE Record for the first endpoint is reported to CQD.
Duration 5 seconds or less	Boolean	True if stream had duration of 5 seconds or less, False otherwise.
Duration 60 seconds or more	Boolean	True if stream had duration of 60 seconds of more, False otherwise.
Is Teams	Boolean	True indicates that the first or second user agent for the stream is a Microsoft Teams endpoint. False indicates that the user agents are Skype for Business endpoints.
Duration (Minutes)	Range (minutes)	Duration of stream in minutes. Values grouped by range. Example value: 065: [3–4)
Duration (Seconds)	Range (seconds)	Duration of stream in seconds. Values grouped by range. Example value: 062: [1 -2)
Date
End Time	String	Time of day the call ended. Values are reported in the UTC time zone.	• Call setup failed or wasn't established (see CDR Response Reason)
Year	Integer	Year of the end of the stream. Values are reported in the UTC time zone. Example value: 2018
Month	Integer	Month of the end of the stream. Values are reported in the UTC time zone. Example value: 2
Day	Integer	Day of the end of the stream. Values are reported in the UTC time zone. Example value: 1
Date	String	Date the stream ended. Values are reported in the UTC time zone. Example value: 2018-06-01
Hour	Integer	Hour of the end of the stream. Values are reported in the UTC time zone. Example value: 1
Minute	Integer	Minute of the end of the stream. Values are reported in the UTC time zone. Example value: 30
Second	Integer	Second of the end of the stream. Values are reported in the UTC time zone. Example value: 12
Day Of Year	Integer	Day of year of the end of the stream. Values are reported in the UTC time zone. Example value: 32
Day Of Week	String	Day of week of the end of the stream. Values are reported in the UTC time zone. Example value: Wednesday
Day Number Of Week	Integer	Day number of week of the end of the stream. Values are reported in the UTC time zone. Example value: 3
Week	String	Starting date of the week in which the call took place. Example value: 2019-09-01	• Call setup failed or wasn't established (see CDR Response Reason)
Month Year	String	Month and year of the end of the stream. Values are reported in the UTC time zone. Example value: 2017-02
Full Month	Date time	Full Month of the end of the stream. Values are reported in the UTC time zone. Example value: 2017-02-01T00:00:00
Start time	String	Time of day the call started. Values are reported in the UTC time zone.	• Call setup failed or wasn't established (see CDR Response Reason)
UserAgent
First Domain	String	Domain of the first endpoint's user. If the first endpoint is a conference server, it uses the domain of the organizer of the meeting. Might also be the domain of service accounts used in scenario. Example value: contoso.com
Second Domain	String	Domain of the second endpoint's user. If the second endpoint is a conference server, it uses the domain of the organizer of the meeting. Might also be the domain of service accounts used in scenario. Example value: contoso.com
First User Agent Category	String	Category of the user agent of the first endpoint. Example value: OC	• A user agent doesn't currently have a mapping
Second User Agent Category	String	Category of the user agent of the second endpoint. Example value: OC	• A user agent doesn't currently have a mapping
First User Agent	String	User agent string of the first endpoint. Example value: UCCAPI/16.0.7766.5281 OC/16.0.7766.2047 (Skype for Business)	• No user agent reported by first endpoint
Second User Agent	String	User agent string of the second endpoint. Example value: UCCAPI/16.0.7766.5281 OC/16.0.7766.2047 (Skype for Business)	• No user agent was reported by second endpoint
Conference Type	Enumeration Possible values: • conf:applicationsharing • conf:audio-video • conf:focus	Type of conference URI. Example value: conf:audio-video	• Non-conference scenario.
Conference ID	String	Conference ID (or Call ID) associated with the streams. In cqd.teams.microsoft.com, all calls have a call ID regardless of whether they're a person-to-person (P2P) call or a conference call. This dimension might have too many rows to be used as dimension in a report. It can be used a filter instead. Example value (cqd.teams.microsoft.com): 5a962ccf-b9cb-436a-a433-f28bf5404ad8
First Client App Version	String	Version of the application used for the first endpoint. Data is parsed from the user agent string. Example value: 16.0.7766.2047	• The version string couldn't be parsed • The value wasn't reported.
Second Client App Version	String	Version of the application used for the second endpoint. Data is parsed from the user agent string. Example value: 16.0.7766.2047	• The version string couldn't be parsed • The value wasn't reported.
Meeting Id	String	The identifier for the meeting, generated when the meeting is created. Example value: 19:meeting_MzB...zIw@thread.v2
First Client App Version Age	String	Client App Version Age indicates the age of the Teams client version (based on the Media Stack revision) in use by the first endpoint at the time the stream is established.
Second Client App Version Age	String	Client App Version Age indicates the age of the Teams client version (based on the Media Stack revision) in use by the second endpoint at the time the stream is established.
Network
Transport	Enumeration Possible values: • UDP • TCP • Unrecognized	Network transport type used by stream. Unrecognized indicates that the system couldn't determine if the transport type is TCP or UDP.	• Transport type wasn't reported • The media path wasn't established
First Connectivity Ice	Enumeration Possible values: • DIRECT= Direct network path • RELAY = through relay • HTTP = through HTTP proxy • FAILED = connectivity failed	ICE connectivity type used by the first endpoint.	• Transport type wasn't reported • The media path wasn't established
Second Connectivity Ice	Enumeration Possible values: • DIRECT= Direct network path • RELAY = through relay • HTTP = through HTTP proxy • FAILED = connectivity failed	ICE connectivity type used by the second endpoint.	• Transport type wasn't reported • The media path wasn't established
First IP Address	String	IP address for first endpoint. Note this dimension might have too many rows to be used as dimension in a report. It can be used as a filter instead. Example value: 10.0.0.10	• Transport type wasn't reported • The media path wasn't established
Second IP Address	String	IP address for second endpoint. Note: This dimension might have too many rows to be used as dimension in a report. It can be used as a filter instead. Example value: 10.0.0.10	• Transport type wasn't reported • The media path wasn't established
First Link Speed	Integer	Link speed in bits per second reported by the network adapter used by the first endpoint. Example value: 10000000	• Transport type wasn't reported • The media path wasn't established
Second Link Speed	Integer	Link speed in bits per second reported by the network adapter used by the second endpoint. Example value: 10000000	• Transport type wasn't reported • The media path wasn't established
First Port	Port number	Network port number used by first endpoint for media. Example value: 50018	• Transport type wasn't reported • The media path wasn't established
Second Port	Port number	Network port number used by second endpoint for media. Example value: 50018	• Transport type wasn't reported • The media path wasn't established
First Reflexive Local IP	String	IP address of first endpoint as seen by the media relay server. This value is typically the public internet IP address associated to the first endpoint for the stream. Example value: 104.43.195.251	• Transport type wasn't reported • The media path wasn't established
Second Reflexive Local IP	String	IP address of second endpoint as seen by the media relay server. This value is typically the public internet IP address associated to the second endpoint for the stream. Example value: 104.43.195.251	• Transport type wasn't reported • The media path wasn't established
First Relay IP	String	IP address of the media relay server allocated by the first endpoint. Example value: 104.43.195.251	• Transport type wasn't reported • The media path wasn't established
Second Relay IP	String	IP address of the media relay server allocated by the second endpoint. Example value: 104.43.195.251	• Transport type wasn't reported • The media path wasn't established
First Relay Port	Integer	Media port allocated on the media relay server by the first endpoint. Example value: 3478	• Transport type wasn't reported • The media path wasn't established
Second Relay Port	Integer	Media port allocated on the media relay server by the second endpoint. Example value: 3478	• Transport type wasn't reported • The media path wasn't established
First Subnet	String	Subnet used for media stream by first endpoint with dashes separating each octet. Example value: 104.43.195.0	•Data not reported by the endpoint • Media path wasn't established • IPv6 was used
Second Subnet	String	Subnet used for media stream by second endpoint with dashes separating each octet. Example value: 104.43.195.0	•Data not reported by the endpoint • Media path wasn't established • IPv6 was used
First VPN	Boolean	True if the network adapter used by first endpoint indicated it's a VPN connection, False otherwise. Some VPNs don't correctly report this data correctly.	• Transport type wasn't reported • The media path wasn't established
Second VPN	Boolean	True if the network adapter used by second endpoint indicated it's a VPN connection, False otherwise. Some VPNs don't correctly report this data correctly.	• Transport type wasn't reported • The media path wasn't established
Applied Bandwidth Source	Enumeration Possible values: • Static Max • API Modality • API Modality_All • API SendSide BWLimit • Preference Value • TURN • ReceiveSide TURN • API SDP Modality • Remote Received • Side BWLimit • API ServiceQuality • API SDP • Receive SidePDP	Identifies the source of bandwidth applied to the stream.	• Transport type wasn't reported • The media path wasn't established
Bandwidth Est	Integer Range	Average estimated bandwidth available between first and second endpoint in bits per second. Example value: 026: [260000 - 270000)	• Transport type wasn't reported • The media path wasn't established
Mediation Server Bypass Flag	Boolean	True if the media stream bypassed the Mediation Server and went straight between client and PSTN Gateway/PBX, False otherwise.	• Transport type wasn't reported • The media path wasn't established
First CDR Connectivity Type	Enumeration Possible values: • OS • PeerDerived • Stun • Turn	Identifies the ICE connectivity path selected by the first endpoint for use for this stream. Example value: OS	• Transport type wasn't reported • The media path wasn't established
Second CDR Connectivity Type	Enumeration Possible values: • OS • PeerDerived • Stun • Turn	Identifies the ICE connectivity path selected by the second endpoint for use for this stream. Example value: OS	• Transport type wasn't reported • The media path wasn't established
First BSSID	String	The Wireless LAN basic service set identifier of the First endpoint used to connect to the network. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
Second BSSID	String	The Wireless LAN basic service set identifier of the Second endpoint used to connect to the network. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
First Base Address	String	IP address of the interface that the first endpoint used for allocating media relay candidates. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 10.0.0.10	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Base Address	String	IP address of the interface that the second endpoint used for allocating media relay candidates. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 10.0.0.10	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Local Address	String	IP address that the first endpoint used for media flow at the end of media connectivity checks. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 10.0.0.10	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Local Address	String	IP address that the second endpoint used for media flow at the end of media connectivity checks. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 10.0.0.10	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Local Address Type	Enumeration Possible Values •IceAddrType_Os •IceAddrType_Stun •IceAddrType_Turn •IceAddrType_UPnP •IceAddrType_ISA_Proxy •IceAddrType_PeerDerived •IceAddrType_Invalid	The candidate type of First Local Address. IceAddrType_Turn indicates a relayed call. The rest of the types indicate direct connections.	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Local Address Type	Enumeration Possible Values •IceAddrType_Os •IceAddrType_Stun •IceAddrType_Turn •IceAddrType_UPnP •IceAddrType_ISA_Proxy •IceAddrType_PeerDerived •IceAddrType_Invalid	The candidate type of Second Local Address. IceAddrType_Turn indicates a relayed call. The rest of the types indicate direct connections.	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Remote Address	String	IP Address of the second endpoint to which the first endpoint sends media to at the end of media connectivity checks. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 10.0.0.10	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Remote Address	String	IP Address of the first endpoint to which the second endpoint sends media to at the end of media connectivity checks. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 10.0.0.10	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Remote Address Type	Enumeration Possible Values •IceAddrType_Os •IceAddrType_Stun •IceAddrType_Turn •IceAddrType_UPnP •IceAddrType_ISA_Proxy •IceAddrType_PeerDerived •IceAddrType_Invalid	Candidate type of First Remote Address. IceAddrType_Turn indicates a relayed call. The rest of the values indicate direct connections.	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Remote Address Type	Enumeration Possible Values •IceAddrType_Os •IceAddrType_Stun •IceAddrType_Turn •IceAddrType_UPnP •IceAddrType_ISA_Proxy •IceAddrType_PeerDerived •IceAddrType_Invalid	Candidate type of Second Remote Address. IceAddrType_Turn indicates a relayed call. The rest of the values indicate direct connections.	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Local Site	String	IP address of the first endpoint as seen by the media relay server. This value is typically the public internet IP address associated with the first endpoint for the stream. If for some reason the relays aren't reachable or allocations failed, this value is the IP of a local interface on the first endpoint. This dimension is similar to First Reflexive Local IP, but this information is reported by the Transport Diagnostic event instead of QoE. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 104.43.195.251	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Local Site	String	IP Address of the second endpoint as seen by the media relay server. This value is typically the public internet IP address associated with the second endpoint for the stream. If for some reason the relays aren't reachable or allocations failed, this value is the IP of a local interface on the first endpoint. This dimension is similar to Second Reflexive Local IP, but this information is reported by the Transport Diagnostic event instead of QoE. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 104.43.195.251	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Remote Site	String	The Local Site IP address reported by the second endpoint and exchanged with the first endpoint. Extra information in case Transport Diagnostic event on the second endpoint isn't available for any reason. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 104.43.195.251	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Remote Site	String	The Local Site IP address reported by the first endpoint and exchanged with the second endpoint. Extra information in case the Transport Diagnostic event on the first endpoint isn't available for any reason. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. Example value: 104.43.195.251	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Local Media Relay Address	String	Microsoft IP address of the media relay server allocated by the first endpoint. This dimension is similar information to First Relay IP, but is reported by the Transport Diagnostic event instead of QoE. Example value: 52.114.5.237	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Local Media Relay Address	String	Microsoft IP address of the media relay server allocated by the second endpoint. This dimension is similar information to Second Relay IP, but is reported by the Transport Diagnostic event instead of QoE. Example value: 52.114.5.237	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Remote Media Relay Address	String	Microsoft IP address of the media relay server allocated by the second endpoint and exchanged with the first endpoint. Extra information in case the Transport Diagnostic event on the second endpoint isn't available for any reason. Example value: 52.114.5.237	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Remote Media Relay Address	String	Microsoft IP address of the media relay server allocated by the first endpoint and exchanged with the second endpoint. Extra information in case the Transport Diagnostic event on the first endpoint isn't available for any reason. Example value: 52.114.5.237	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Transport Protocol	Enumeration string	The communications protocol used by the first endpoint for sending media. Possible Values •UDP - Multi-purpose UDP used for both TURN and host allocations •TurnTCP - TCP TURN allocation. Uses the proxy if proxy settings are specified •TCPHostPassive - TCP listen host socket for a passive connection type •TCPHostActive - TCP connection using an active connection type •CompoundTCP - A combination of upstream and downstream TCP connections. Typically over the HTTPS protocol. •MultiTCP - A connectivity model that uses multiple TCP connections and distributes packets to each using round robin.	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Transport Protocol	Enumeration string	The communications protocol used by the second endpoint for sending media. Possible Values •UDP - Multi-purpose UDP used for both TURN and host allocations •TurnTCP - TCP TURN allocation. Uses the proxy if proxy settings are specified •TCPHostPassive - TCP listen host socket for a passive connection type •TCPHostActive - TCP connection using an active connection type •CompoundTCP - A combination of upstream and downstream TCP connections. Typically over the HTTPS protocol. •MultiTCP - A connectivity model that uses multiple TCP connections and distributes packets to each using round robin.	• Transport Diagnostic type wasn't reported • The media path wasn't established
First Reflexive Local IP Network	String	IP subnet (/24) of first endpoint as seen by the media relay server. This value is typically the subnet of the public internet IP address associated to the first endpoint for the stream. Example value: 52.114.5.0	• Transport Diagnostic type wasn't reported • The media path wasn't established
Second Reflexive Local IP Network	String	IP subnet (/24) of second endpoint as seen by the media relay server. This value is typically the subnet of the public internet IP address associated to the second endpoint for the stream. Example value: 52.114.5.0	• Transport Diagnostic type wasn't reported • The media path wasn't established
First VPN Estimated	Boolean	Indicates high probability of a connection over a Virtual Private Network (VPN). Possible values: 0 or 1
Second VPN Estimated	Boolean	Indicates high probability of a connection over a Virtual Private Network (VPN). Possible values: 0 or 1
First Roaming Trigger	Enumeration (String)	Indicates the most recent cause the first endpoint performed a lightweight reconnect mid-call where signaling wasn't involved. For example, when an endpoint switches wireless access points on the same network. Possible values: • Remote - Sending packets to Peer, but Peer isn't receiving them • ConsentKA - Keep-Alive Failures; 7 second time-out if no response to keep-alive packets • Interface - Local Interface change or flap • RelayDraining - Service maintenance (Expected)	• No roams occurred • The endpoint didn't send data
Second Roaming Trigger	Enumeration (String)	Indicates number of times the second endpoint performed a lightweight reconnect mid-call where signaling wasn't involved. For example, when an endpoint switches wireless access points on the same network. Possible values: • Remote - Sending packets to Peer, but Peer isn't receiving them • ConsentKA - Keep-Alive Failures; 7 second time-out if no response to keep-alive packets • Interface - Local Interface change or flap • RelayDraining - Service maintenance (Expected)	• No roams occurred • The endpoint didn't send data
First Roaming Count	Range (Integer)	Indicates number of times the first endpoint performed a lightweight reconnect mid-call where signaling wasn't involved. For example, when an endpoint switches wireless access points on the same network. Example value: 064: [1 - 2)
Second Roaming Count	Range (Integer)	Indicates number of times the second endpoint performed a lightweight reconnect mid-call where signaling wasn't involved. For example, when an endpoint switches wireless access points on the same network. Example value: 064: [1 - 2)
First Recv AV Sync Distance Avg	Milliseconds	The average difference between audio and video modality (video or VBSS) network delays in milliseconds for the first endpoint. A positive value would mean that audio arrived later than the video.
Second Recv AV Sync Distance Avg	Milliseconds	The average difference between audio and video modality (video orVBSS) network delays in milliseconds for the second endpoint. A positive value would mean that audio arrived later than the video.
First Recv AV Sync Distance Max	Milliseconds	The maximum difference value of how much video or VBSS is ahead of the audio for the first endpoint in milliseconds.
Second Recv AV Sync Distance Max	Milliseconds	The maximum difference value of how much video or VBSS is ahead of the audio for the second endpoint in milliseconds.
First Recv AV Sync Distance Min	Milliseconds	The minimum difference value of how much video or VBSS is ahead of the audio for the first endpoint in milliseconds.
Second Recv AV Sync Distance Min	Milliseconds	The minimum difference value of how much video or VBSS is ahead of the audio for the second endpoint in milliseconds.
First Recv AV Sync Distance Std Dev	Milliseconds	The standard deviation of the difference in audio/video sync delay for the first endpoint. Higher values are indicative of a larger variation of the offsync and can indicate burstier video transmission.
Second Recv AV Sync Distance Std Dev	Milliseconds	The standard deviation of the difference in audio/video sync delay for the second endpoint. Higher values are indicative of a larger variation of the offsync and can indicate burstier video transmission.
Outbound Bit Rate Avg	Kilobits per second (Integer)	The average bit rate of the outbound audio stream in kbps. Must be used with Stream Direction.	• The stream wasn't an audio stream.
Network Score	Range (Decimal)	Network Score is a value computed from network round-trip time, packet loss, and jitter. It is a ranking of the network quality for a Teams call or stream in a single number, with higher values being better.
First Web Network Receive Good Ratio	Range (Ratio)	Indicates how much of a stream's network receive quality was assessed as good on the first endpoint	• Endpoint wasn't using the Teams Web client
Second Web Network Receive Good Ratio	Range (Ratio)	Indicates how much of a stream's network receive quality was assessed as good on the second endpoint	• Endpoint wasn't using the Teams Web client
First Web Network Receive Bad Ratio	Range (Ratio)	Indicates how much of a stream's network receive quality was assessed as bad on the first endpoint	• Endpoint wasn't using the Teams Web client
Second Web Network Receive Bad Ratio	Range (Ratio)	Indicates how much of a stream's network receive quality was assessed as bad on the second endpoint	• Endpoint wasn't using the Teams Web client
First Web Network Send Good Ratio	Range (Ratio)	Indicates how much of a stream's network send quality was assessed as good on the first endpoint	• Endpoint wasn't using the Teams Web client
Second Web Network Send Good Ratio	Range (Ratio)	Indicates how much of a stream's network send quality was assessed as good on the second endpoint	• Endpoint wasn't using the Teams Web client
First Web Network Send Bad Ratio	Range (Ratio)	Indicates how much of a stream's network send quality was assessed as bad on the first endpoint	• Endpoint wasn't using the Teams Web client
Second Web Network Send Bad Ratio	Range (Ratio)	Indicates how much of a stream's network send quality was assessed as bad on the second endpoint	• Endpoint wasn't using the Teams Web client
Device
First Capture Dev	String	Name of the capture device used by the first endpoint. For: Audio streams = device used for the microphone Video streams = device used for the camera Video-based-screen-sharing streams = screen scraper App sharing streams = blank Example value: Headset Microphone (Microsoft LifeChat LX-6000)	• The endpoint didn't report the data • The media path wasn't established • The stream was video-based screen sharing or application sharing.
Second Capture Dev	String	Name of the capture device used by the second endpoint. Audio streams = device used for the microphone Video streams = device used for the camera Video-based-screen-sharing streams = screen scraper App sharing streams = blank Example value: Headset Microphone (Microsoft LifeChat LX-6000)	• The endpoint didn't report data • Media path wasn't established • The stream was video-based screen sharing or application sharing
First Capture Dev Driver	String	Name of the capture device driver used by the first endpoint in the form of "manufacturer : version". For: Audio streams = driver used for the microphone Video streams = driver used for the camera Video-based-screen-sharing and app sharing streams = blank Example value: Microsoft: 10.0.14393.0	• The endpoint didn't report data • The media path wasn't established • The stream was video-based screen sharing or application sharing.
Second Capture Dev Driver	String	Name of the capture device driver used by the second endpoint in the form of "manufacturer : version". For: Audio streams = driver used for the microphone Video streams = driver used for the camera Video-based-screen-sharing and app sharing streams = blank Example value: Microsoft: 10.0.14393.0	• The endpoint didn't report data • The media path wasn't established • The stream was video-based screen sharing or application sharing.
First Render Dev	String	Name of the render device used by the first endpoint. For: Audio streams - device used for the speaker Video and video-based-screen-sharing streams - device used for the display App sharing streams - blank Example value: Headset Earphone (Microsoft LifeChat LX-6000)	• The endpoint didn't report this data • The media path wasn't established • The stream was application sharing
Second Render Dev	String	Name of the render device used by the second endpoint. For: Audio streams - device used for the speaker Video and video-based-screen-sharing streams - device used for the display App sharing streams - blank Example value: Headset Earphone (Microsoft LifeChat LX-6000)	• The endpoint didn't report this data, • Media path wasn't established • The stream was application sharing
First Render Dev Driver	String	Name of the render device driver used by the first endpoint. For: Audio streams - driver used for the speaker Video and video-based-screen-sharing streams - driver used for the display App sharing streams - blank Example value: Microsoft: 10.0.14393.0	• The endpoint didn't report this data • Media path wasn't established • The stream was application sharing
Second Render Dev Driver	String	Name of the render device driver used by the second endpoint. For: Audio streams - driver used for the speaker Video and video-based-screen-sharing streams - driver used for the display App sharing streams - blank Example value: Microsoft: 10.0.14393.0	• The endpoint didn't report this data • Media path wasn't established • The stream was application sharing
First Audio Devices Connection Type	Enumeration string	The connection interface or type of the audio device used on the first endpoint Possible values: BlueTooth, HDAudio, Internal, Mixed, PCI, USB, Other
Second Audio Devices Connection Type	Enumeration string	The connection interface or type of the audio device used on the first endpoint Possible values: BlueTooth, HDAudio, Internal, Mixed, PCI, USB, Other
First Audio Device General Failure	Boolean	Indicates if a general hardware failure is detected on the audio device of the first endpoint.
Second Audio Device General Failure	Boolean	Indicates if a general hardware failure is detected on the audio device of the second endpoint.
First Mic Device Failure	Boolean	Indicates if an audio capture device failure is detected on the first endpoint.
Second Mic Device Failure	Boolean	Indicates if an audio capture device failure is detected on the second endpoint.
First No Mic Devices Enumerated Failure	Boolean	Indicates that no audio capture devices were detected on the first endpoint.
Second No Mic Devices Enumerated Failure	Boolean	Indicates that no audio capture devices were detected on the second endpoint.
First Mic Is Silent	Boolean	Indicates no audio is detected from the first endpoint microphone while unmuted.
Second Mic Is Silent	Boolean	Indicates no audio is detected from the second endpoint microphone while unmuted.
First Mic Initialization Failure	Boolean	Indicates that a failure occurred during the hardware initialization of the microphone device on the first endpoint.
Second Mic Initialization Failure	Boolean	Indicates that a failure occurred during the hardware initialization of the microphone device on the second endpoint.
First Mic Connection Type	Enumeration string	The connection interface or type of the microphone device used on the first endpoint Possible values: BlueTooth, HDAudio, Internal, PCI, USB, Virtual, Other
Second Mic Connection Type	Enumeration string	The connection interface or type of the microphone device used on the second endpoint Possible values: BlueTooth, HDAudio, Internal, PCI, USB, Virtual, Other
First Speaker Device Failure	Boolean	Indicates if an audio render device failure is detected on the first endpoint.
Second Speaker Device Failure	Boolean	Indicates if an audio render device failure is detected on the second endpoint.
First No Speaker Devices Enumerated Failure	Boolean	Indicates that no audio render devices were detected on the first endpoint.
Second No Speaker Devices Enumerated Failure	Boolean	Indicates that no audio render devices were detected on the second endpoint.
First Speaker Initialization Failure	Boolean	Indicates that a failure occurred during the hardware initialization of the audio render device on the first endpoint.
Second Speaker Initialization Failure	Boolean	Indicates that a failure occurred during the hardware initialization of the audio render device on the second endpoint.
First Speaker Connection Type	Enumeration string	The connection interface or type of the audio render device used on the first endpoint Possible values: USB, Wireless, Other
Second Speaker Connection Type	Enumeration string	The connection interface or type of the audio render device used on the second endpoint Possible values: USB, Wireless, Other
First Compute Device Name	String	The detected system manufacturer and system model of the first endpoint. Example: microsoft corporation surface pro	• System manufacturer and model weren't detected.
Second Compute Device Name	String	The detected system manufacturer and system model of the second endpoint. Example: microsoft corporation surface pro	• System manufacturer and model weren't detected.
First Device Failure	Boolean	Indicates if an audio capture or render device failure is detected on the first endpoint.
Second Device Failure	Boolean	Indicates if an audio capture or render device failure is detected on the second endpoint.
WiFi
First WiFi Microsoft Driver	String	Name of Microsoft WiFi driver used reported by the first endpoint. Value might be localized based on the language used by endpoint. Example value: Microsoft Hosted Network Virtual Adapter	• WiFi wasn't used by the endpoint • The driver information wasn't reported
Second WiFi Microsoft Driver	String	Name of Microsoft WiFi driver used reported by the second endpoint. Value might be localized based on the language used by endpoint. Example value: Microsoft Hosted Network Virtual Adapter	• WiFi wasn't used by the endpoint • The driver information wasn't reported
First WiFi Vendor Driver	String	Vendor and name of WiFi driver reported by the first endpoint. Example value: Contoso Dual Band Wireless-AC Driver	• WiFi wasn't used by the endpoint • The driver information wasn't reported
Second WiFi Vendor Driver	String	Vendor and name of WiFi driver reported by the second endpoint. Example value: Contoso Dual Band Wireless-AC Driver	• WiFi wasn't used by the endpoint • The driver information wasn't reported
First WiFi Microsoft Driver Version	String	Version of Microsoft WiFi driver reported by the first endpoint. Example value: Microsoft:10.0.14393.0	• WiFi wasn't used by the endpoint • The driver information wasn't reported
Second WiFi Microsoft Driver Version	String	Version of Microsoft WiFi driver reported by the second endpoint. Example value: Microsoft:10.0.14393.0	• WiFi wasn't used by the endpoint • The driver information wasn't reported
First WiFi Vendor Driver Version	String	Vendor and version of WiFi driver reported by the first endpoint. Example value: Contoso:15.1.1.0	• WiFi wasn't used by the endpoint • The driver information wasn't reported
Second WiFi Vendor Driver Version	String	Vendor and version of WiFi driver reported by the second endpoint. Example value: Contoso:15.1.1.0	• WiFi wasn't used by the endpoint • The driver information wasn't reported
First WiFi Channel	String	WiFi channel used by the first endpoint. Example value: 10	• WiFi wasn't used • The channel wasn't reported
Second WiFi Channel	String	WiFi channel used by the second endpoint. Example value: 10	• WiFi wasn't used • The channel wasn't reported
First WiFi Radio Type	String	Type of WiFi radio used by the first endpoint. HRDSSS is equivalent to 802.11b. Example value: 802.11ac	• WiFi wasn't used • The WiFi type wasn't reported
Second WiFi Radio Type	String	Type of WiFi radio used by the second endpoint. HRDSSS is equivalent to 802.11b. Example value: 802.11ac	• WiFi wasn't used • The WiFi type wasn't reported
First WiFi Band	String	WiFi band used as reported by the first endpoint. Example value: 5.0 Ghz	• The endpoint didn't compute the value • The value wasn't reported
Second WiFi Band	String	WiFi band used as reported by the second endpoint. Example value: 5.0 Ghz	• The endpoint didn't compute the value • The value wasn't reported
First WiFi Signal Strength	String	WiFi signal strength in percentage [0-100] reported by the first endpoint. Example value: 081: [90 - 100)	• The endpoint didn't compute the value • The value wasn't reported
Second WiFi Signal Strength	String	WiFi signal strength in percentage [0-100] reported by the second endpoint. Example value: 081: [90 - 100)	• The endpoint didn't compute the value • The value wasn't reported
First WiFi Battery Charge	Range (percentage)	Estimated remaining battery charge in percentage [0-99] reported by the first endpoint. Values grouped by range. 0 indicates that the device was plugged in. Example value: 081: [90 - 100)	• WiFi wasn't used • The charge value wasn't reported
Second WiFi Battery Charge	Range (percentage)	Estimated remaining battery charge in percentage [0-99] reported by the second endpoint. Values grouped by range. 0 indicates that the device was plugged in. Example value: 081: [90 - 100)	• WiFi wasn't used • The charge value wasn't reported
Metrics
First Web Max Session Bandwidth	Range (Kbps)	Displays the lower of either the default bandwidth limit or the bandwidth limit set by tenant policy for the Teams web client on the first endpoint	• Endpoint wasn't using the Teams Web client.
Second Web Max Session Bandwidth	Range (Kbps)	Displays the lower of either the default bandwidth limit or the bandwidth limit set by tenant policy for the Teams web client on the second endpoint	• Endpoint wasn't using the Teams Web client.
Audio Degradation Avg	Range (Mean opinion score 0-5)	Average Network Mean Opinion Score degradation for stream. Represents how much the network loss and jitter impact the quality of received audio. Not for use with SATIN or WebRTC/VDI. Values grouped by range. Example value: 015: [0.01 - 0.02)	• The endpoint receiving the stream reported no network MOS degradation • The stream isn't an audio stream.
Jitter	Range (millisecond)	Average jitter for stream in milliseconds. Values grouped by range. Example value: 065: [2 - 3)	• The endpoint receiving the stream reported no jitter data
Jitter Max	Range (millisecond)	Maximum jitter for stream in milliseconds. Values grouped by range. Example value: 065: [2 - 3)	• The endpoint receiving the stream reported no jitter data
Packet Loss Rate	Range (ratio)	Average packet loss rate for stream. Values grouped by range. 0.1 indicates 10% packet loss. Example value: 015: [0.01 - 0.02)	• The endpoint receiving the stream reported no packet loss data
Packet Loss Rate Max	Range (ratio)	Maximum packet loss rate for stream. Values grouped by range. 0.1 indicates 10% packet loss. Example value: 023: [0.09 - 0.1)	• The endpoint receiving the stream reported no packet loss data • Packet utilization for a given stream is less than 100 packets
Send Listen MOS	Range (MOS)	Average MOS for stream. Values grouped by range. Example value: 076: [4.4 - 4.5)	• The endpoint receiving the stream reported no MOS • The stream isn't an audio stream • Codec used doesn't report MOS
Overall Avg Network MOS	Range (MOS)	Average Network MOS for stream. Values grouped by range. Example value: 076: [4.4 - 4.5)	• The endpoint receiving the stream reported no network MOS degradation • The stream isn't an audio stream • Codec used doesn't report MOS
Ratio Concealed Samples Avg	Range (ratio)	Ratio of the number of audio frames with samples generated by packet loss concealment to the total number of audio frames. Values grouped by range. 0.1 indicates 10% of frames contained concealed samples. Example value: 015: [0.01 - 0.02)	• The receiver of the stream didn't report this value • The stream wasn't an audio stream
Conceal Ratio Max	Range (ratio)	The maximum seen number of audio frames with samples generated by packet loss concealment to the total number of audio frames. Values grouped by range. 0.1 indicates 10% of frames contained concealed samples. Example value: 015: [0.01 - 0.02)
Ratio Stretched Samples Avg	Range (ratio)	Ratio of the number of audio frames with samples that are stretched to compensate for jitter or loss to the total number of audio frames. Values grouped by range. 0.1 indicates 10% audio frames contained stretched samples. Example value: 017: [0.03 - 0.04)	• The receiver of the stream didn't report this value • The stream wasn't an audio stream
Healer Packet Drop Ratio	Range (ratio)	Ratio of audio packets dropped by healer over total number of audio packets received by healer. See 2.2.1.12.1 Child Elements for more information.
Healer FEC Packet Used Ratio	Range (ratio)	Ratio of used Forward Error Correction (FEC) packets over total number of received FEC packets. See 2.2.1.12.1 Child Elements for more information.
Round Trip	Range (milliseconds)	Average network propagation round-trip time computed as specified in RFC3550 in milliseconds. Values grouped by range. Example value: 070: [15 - 20)	• The value wasn't computed by the endpoint • The value wasn't reported
Round Trip Max	Range (milliseconds)	Maximum network propagation round-trip time computed as specified in RFC3550 in milliseconds. Values grouped by range. Example value: 098: [350 - 375)	• The value wasn't computed by the endpoint • The value wasn't reported
Packet Utilization	Range (packets)	Number of Real-Time Transport Protocol (RTP) packets sent in the session.
Jitter Buffer Size Avg	Range (number)	Average size of jitter buffer during session.
Jitter Buffer Size Max	Range (number)	Maximum size of jitter buffer during session.
Jitter Buffer Size Min	Range (number)	Minimum size of jitter buffer during session.
Relative OneWay Gap Duration	Range (number)	Duration of gaps in the relative one way delay of the peer.
Audio Post FECPLR	Number	Reports packet loss rate after FEC has been applied for audio. Value between 0.00 and 1.00.
Network Jitter Avg	Range (milliseconds)	Average of network jitter in milliseconds computed over 20 second windows during the session. Values grouped by range. Example value: 066: [3–4)	• The stream wasn't an audio stream • Data wasn't reported by the endpoint receiving the stream
Network Jitter Max	Number of events	Maximum of network jitter computed over 20 second windows during the session.
Network Jitter Min	Number of events	Minimum of network jitter computed over 20 second window during the session.
Video Post FECPLR	Range (ratio)	Packet loss rate after FEC is applied for aggregated across all video streams and codecs. Values grouped by range. Example value: 014: [0 - 0.01)	• The stream wasn't a video or video-based-screen-sharing stream • The endpoint receiving the stream didn't report data
Video Local Frame Loss Percentage Avg	Range (percentage)	Average percentage of video frames lost as displayed to the user. Values grouped by range. This includes frames recovered from network losses. Example value: 160: [80 - 85)	• The stream wasn't a video or video-based-screen-sharing stream • The endpoint receiving the stream didn't report data
Recv Frame Rate Average	Range (frames per second)	Average frames per second received for all video streams computed over the duration of the session. Values grouped by range. Example value: 101: [14.5 - 15)	• The stream wasn't a video or video-based-screen-sharing stream • The endpoint receiving the stream didn't report data
Low Frame Rate Call Percent	Range (percentage)	Percentage of time of the call where frame rate is less than 7.5 frames per second. Values grouped by range. Example value: 099: [13.5 - 14)	• The stream wasn't a video or video-based-screen-sharing stream • The endpoint receiving the stream didn't report data
Video Packet Loss Rate	Range (ratio)	Average fraction of packets lost, as specified in RFC3550, computed over the duration of the session. Values grouped by range. Example value: 037: [0.75 - 0.8)	• The stream wasn't a video or video-based-screen-sharing stream • The endpoint receiving the stream didn't report data
Video Frame Rate Avg	Range (frames per second)	Average frames per second received for a video stream, computed over the duration of the session. Values grouped by range. Example value: 135: [31.5 - 32)	• The stream wasn't a video or video-based-screen-sharing stream • The endpoint receiving the stream didn't report data
Dynamic Capability Percent	Range (percentage)	Percentage of time that the client is running < 70% expected video processing capability for this type of CPU grouped by range Example value: 122: [25 - 25.5)	• The stream wasn't a video or video-based-screen-sharing stream • The endpoint receiving the stream didn't report data
Spoiled Tile Percent Total	Range (percentage)	Percentage of tiles which are discarded instead of being sent to a remote peer (for example, from the MCU to a viewer). Values grouped by range. Discarded tiles might be caused by bandwidth restrictions between client and server. Example value: 140: [34 - 34.5)	• The stream wasn't an application sharing stream • The endpoint sending the stream didn't report the data
AppSharing Relative OneWay Average	Range (seconds)	Average relative one-way delay between the endpoints in seconds for application sharing streams. Values grouped by range. Example value: 015: [0.01 - 0.02)	• The stream wasn't an application sharing stream • The endpoint sending the stream didn't report the data
AppSharing RDP Tile Processing Latency Average	Range (milliseconds)	Average latency in milliseconds processing tiles on the RDP Stack at the conferencing server. Values grouped by range. Example value: 103: [15.5 - 16)	• The stream wasn't an application sharing stream in a conference • The endpoint sending the stream didn't report the data
First Network Delay Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected the network delay was significant enough to impact the ability to have real-time two-way communication. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Network Delay Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected the network delay was significant enough to impact the ability to have real-time two-way communication. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Network Bandwidth Low Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected the available bandwidth or bandwidth policy was low enough to cause poor quality of the audio sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Network Bandwidth Low Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected the available bandwidth or bandwidth policy was low enough to cause poor quality of the audio sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Mic Glitch Rate	Number	Average glitches per 5 minutes for the microphone capture of the first endpoint. For more information, see 2.2.1.12.1 Child Elements.
Second Mic Glitch Rate	Number	Average glitches per 5 minutes for the microphone capture of the second endpoint. For more information, see 2.2.1.12.1 Child Elements.
First Speaker Glitch Rate	Number of events	Average glitches per 5 minutes for the first loudspeaker rendering.
Second Speaker Glitch Rate	Number of events	Average glitches per 5 minutes for the second loudspeaker rendering.
First Send Mute Percent	Range (Percentage)	Percentage of the audio stream from the first endpoint where the client was muted.	• Stream isn't an audio stream • The first endpoint didn't report data
Second Send Mute Percent	Range (Percentage)	Percentage of the audio stream from the second endpoint where the client was muted.	• Stream isn't an audio stream • The second endpoint didn't report data
First System CPU Resource Usage Average	Range (percentage)	The average of the system's overall CPU usage measured for the first endpoint.
Second System CPU Resource Usage Average	Range (percentage)	The average of the system's overall CPU usage measured for the second endpoint.
First Process CPU Resource Usage Average	Range (percentage)	The average of the CPU usage by the Teams process measured for the first endpoint.
Second Process CPU Resource Usage Average	Range (percentage)	The average of the CPU usage by the Teams process measured for the second endpoint.
First System Memory Resource Usage Average	Range (percentage)	The average of the system's overall memory usage measured for the first endpoint.
Second System Memory Resource Usage Average	Range (percentage)	The average of the system's overall memory usage measured for the second endpoint.
First Process Memory Resource Usage Average	Range (percentage)	The average of the memory usage by the Teams process measured for the first endpoint.
Second Process Memory Resource Usage Average	Range (percentage)	The average of the memory usage by the Teams process measured for the second endpoint.
First System CPU Resource Usage Max	Range (percentage)	The maximum value of the system's overall CPU usage measured for the first endpoint.
Second System CPU Resource Usage Max	Range (percentage)	The maximum value of the system's overall CPU usage measured for the second endpoint.
First Process CPU Resource Usage Max	Range (percentage)	The maximum value of the CPU usage by the Teams process measured for the first endpoint.
Second Process CPU Resource Usage Max	Range (percentage)	The maximum value of the CPU usage by the Teams process measured for the second endpoint.
First System Memory Resource Usage Max	Range (percentage)	The maximum value of the system's overall memory usage measured for the first endpoint.
Second System Memory Resource Usage Max	Range (percentage)	The maximum value of the system's overall memory usage measured for the second endpoint.
First Process Memory Resource Usage Max	Range (percentage)	The maximum value of the memory usage by the Teams process measured for the first endpoint.
Second Process Memory Resource Usage Max	Range (percentage)	The maximum value of the memory usage by the Teams process measured for the second endpoint.
First Web Time Muted In Client	Range (milliseconds)	The amount of time in milliseconds the user was muted in the Teams web client on the first endpoint.	• Endpoint wasn't using the Teams Web client.
Second Web Time Muted In Client	Range (milliseconds)	The amount of time in milliseconds the user was muted in the Teams web client on the first endpoint.	• Endpoint wasn't using the Teams Web client.
Audio
Audio FEC Used	Boolean	True indicates that audio forward error correction (FEC) is used at some point during the call. False otherwise	• The stream wasn't an audio stream • The endpoint sending the stream didn't report the data
First Audio Render Device In Use	String	Indicates which hardware device is used for playback of the audio stream on the first endpoint.	• The endpoint didn't report the data
Second Audio Render Device In Use	String	Indicates which hardware device is used for playback of the audio stream on the second endpoint.	• The endpoint didn't report the data
First Audio Capture Device In Use	String	Indicates which hardware device is used for capture of the audio stream on the first endpoint.	• The endpoint didn't report the data
Second Audio Capture Device In Use	String	Indicates which hardware device is used for capture of the audio stream on the second endpoint.	• The endpoint didn't report the data
First Audio Codec Average BW	Integer	Indicates the average bandwidth for the first endpoint's audio stream measured, in bytes per second.	• Stream wasn't an audio stream
Second Audio Codec Average BW	Integer	Indicates the average bandwidth for the second endpoint's audio stream measured, in bytes per second.	• Stream wasn't an audio stream
First Mic Device Is Speaker Device	Boolean	Indicates if the same audio device is used by the first endpoint for both capture and rendering.
Second Mic Device Is Speaker Device	Boolean	Indicates if the same audio device is used by the second endpoint for both capture and rendering.
First Capture Dev Name	String	Name of the audio capture device used by the first endpoint.
Second Capture Dev Name	String	Name of the audio capture device used by the second endpoint.
First Render Dev Name	String	Name of the audio playback device used by the first endpoint.
Second Render Dev Name	String	Name of the audio playback device used by the second endpoint.
First Noise Suppression Model Download Failure	Boolean	Indicates if the First endpoint successfully downloaded the noise suppression model prior to outbound audio stream establishment.	• Noise suppression model download is not applicable to or supported by the endpoint or codec. • Stream is not outbound audio.
Second Noise Suppression Model Download Failure	Boolean	Indicates if the Second endpoint successfully downloaded the noise suppression model prior to outbound audio stream establishment.	• Noise suppression model download is not applicable to or supported by the endpoint or codec. • Stream is not outbound audio.
Measure
ClassifiedPoorCall	Boolean	True if one or more streams in the call were classified as poor based on the metrics listed in Stream Classification in Call Quality Dashboard.	• The call didn't have sufficient metrics reported to be classified as good or poor
Video Poor Due To VideoPostFecplr	Boolean	True if the stream is classified as poor based on the Video Post FEC PLR metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-video streams.	• The endpoint didn't report this data • The stream wasn't a video stream.
Video Poor Due To VideoLocalFrameLossPercentageAvg	Boolean	True if the video stream is classified as poor based on the Video Local Frame Loss Percentage Avg metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-video streams.	• The endpoint didn't report this data • The stream wasn't a video stream.
Video Poor Due To VideoFrameRateAvg	Boolean	True if the video stream is classified as poor based on the Video Frame Rate Avg metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-video streams.	• The endpoint didn't report this data • The stream wasn't a video stream
VBSS Poor Due To VideoPostFecplr	Boolean	True if the video-based screen-sharing stream is classified as poor based on the Video Post FEC PLR metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-video based screen-sharing streams.	• The endpoint didn't report this data • The stream wasn't a video-based screen sharing stream
VBSS Poor Due To VideoLocalFrameLossPercentageAvg	Boolean	True if the video-based screen-sharing stream is classified as poor based on the Video Local Frame Loss Percentage Avg metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-video based screen-sharing streams.	• The endpoint didn't report this data • The stream wasn't a video-based screen sharing stream
Video Poor Due To Freeze	Boolean	1 if the video stream is classified as poor based on the Video Freeze instance: Stream Classification in Call Quality Dashboard	• The endpoint didn't report this data • The stream wasn't a video stream. This field is specific to Microsoft Teams only.
VBSS Poor Due To VideoFrameRateAvg	Boolean	True if the video based screen-sharing stream is classified as poor based on the Video Frame Rate Avg metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-video based screen-sharing streams.	• The endpoint didn't report this data • The stream wasn't a video-based screen-sharing stream
AppSharing Poor Due To SpoiledTilePercentTotal	Boolean	True if the application sharing stream is classified as poor based on the Spoiled Tile Percent Total metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-application sharing streams.	• The endpoint didn't report this data • The stream wasn't an application sharing stream.
AppSharing Poor Due To RelativeOneWayAverage	Boolean	True if the application sharing stream is classified as poor based on the Relative One Way Average metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-application sharing streams.	• The endpoint didn't report this data • The stream wasn't an application sharing stream
AppSharing Poor Due To RDPTileProcessingLatencyAverage	Boolean	True if the application sharing stream is classified as poor based on the RDP Tile Processing Latency Average metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-application sharing streams.	• The endpoint didn't report this data • The stream wasn't an application sharing stream
Audio Poor Due To Jitter	Boolean	True if the audio stream is classified as poor based on the Jitter metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-audio streams.	• The endpoint didn't report this data • The stream wasn't an audio sharing stream
Audio Poor Due To RoundTrip	Boolean	True if the audio stream is classified as poor based on the Round Trip metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-audio streams.	• The endpoint didn't report this data • The stream wasn't an audio sharing stream
Audio Poor Due To PacketLoss	Boolean	True if the audio stream is classified as poor based on the Packet Loss metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-audio streams.	• The endpoint didn't report this data • The stream wasn't an audio sharing stream
Audio Poor Due To Degradation	Boolean	True if the audio stream is classified as poor based on the Degradation metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-audio streams. Note: Degradation is deprecated in the classifier.	• The endpoint didn't report this data • The stream wasn't an audio sharing stream
Audio Poor Due To ConcealedRatio	Boolean	True if the audio stream is classified as poor based on the Concealed Ratio metric threshold listed here: Stream Classification in Call Quality Dashboard. Is always False for non-audio streams. Note: Concealed Ratio is deprecated in the classifier.	• The endpoint didn't report this data • The stream wasn't an audio sharing stream
Poor Reason	Flags Possible values: • Concealed Ratio • Degradation • Jitter • Packet Loss • Round Trip Video Frame Rate Avg Video Local Frame Loss Percentage Avg • Video Post FEC PLR • RDP Tile Processing Latency Average • Relative OneWay Average • Spoiled Tile Percent Total	List of flags that identify why the stream is marked as poor. There might be multiple flags set since there can be multiple reasons why the stream is marked as Poor. Refer to Stream Classification in Call Quality Dashboard for details.	• The stream wasn't classified as poor
Poor	Boolean	True if the stream has sufficient data to be classified as good or poor and stream is classified as poor. False otherwise.
Good	Boolean	True if the stream has sufficient data to be classified as good or poor and stream is classified as good. False otherwise.
Unclassified	Boolean	False if the stream has sufficient data to be classified as good or poor. True otherwise. Example value: 1
OnePercent PacketLoss	Boolean	True if packet loss exceeded 1%, False otherwise.
Is Dominant Participant	Boolean	If true, indicates high confidence that the stream originated from an endpoint with a high rate of speaker participation.	• Calculated only for Conferencing participants • PSTN participants are excluded from this model
Is Dominant Participant Probability	Decimal (Percentage)	The probability that the stream originated from an endpoint with a high rate of speaker participation; values closer to 1 indicate a higher probability.	• Calculated only for Conferencing participants • PSTN participants are excluded from this model
Detected Inbound Network Problem	Boolean	If true, indicates high confidence that a media stream might be impacted due to the inbound network.	• This dimension only applies to streams where Stream Direction == First-to-Second
Detected Uplink Problem	Boolean	If true, indicates high confidence that a media stream might be impacted due to the network uplink.	• This dimension doesn't apply to P2P calls.
Detected Other User Uplink Problem	Boolean	If true, indicates high confidence that a user's media stream might be impacted due to a dominant participant's network uplink issues.	• This dimension doesn't apply to P2P calls.
Detected Input Device Causing Problem	Boolean	If true, indicates high confidence that the quality of sent media might be impacted due to the user's media capture device.
Detected Other User Device Problem	Boolean	If true, indicates high confidence that a media stream might be impacted due to the remote capture device.
Detected Local Input Device Problem	Boolean	If true, indicates high confidence that a media stream might be impacted due to the render device on the first endpoint.	• This dimension only applies to streams where Stream Direction == First-to-Second
Detected Leaking Echo Problem	Boolean	If true, indicates high confidence that the endpoint's outbound media stream is impacted due to echo.
Detected Hearing Echo Problem	Boolean	If true, indicates high confidence that a media stream might be impacted due to echo.
Detected Compute Device Causing Problem	Boolean	If true, indicates high confidence that the endpoint's outbound media stream might be impacted due to compute resources on the sender's side.
Detected Other User Compute Problem	Boolean	If true, indicates high confidence that a media stream might be impacted due to compute resources on the remote side.
Detected Local Compute Problem	Boolean	If true, indicates high confidence that a media stream might be impacted due to local compute resources.	• This dimension only applies to streams where Stream Direction == First-to-Second
Detected Media Modality Problem	Boolean	If true, indicates high confidence that the user's experience of the inbound media stream was poor.	• This dimension only applies to streams where Stream Direction == First-to-Second
Rating
First Feedback Rating	User rating (1-5)	Rating of the call associated with the stream by the first endpoint on 1-5 scale (5 = excellent). 0 indicates the user was shown the call rating survey but didn't rate their experience. Example value: 5	• No survey was shown to the first endpoint
Second Feedback Rating	User rating (1-5)	Rating of the call associated with the stream by the second endpoint on 1-5 scale (5 = excellent). 0 indicates the user was shown the call rating survey but didn't rate their experience. Example value: 5	• No survey was shown to the second endpoint
First Feedback Tokens	String	String containing list of feedback tokens with boolean flag that indicates if token is set by the user providing feedback from the first endpoint. Example value: {DistortedSpeech:1; ElectronicFeedback:1; BackgroundNoise:1; MuffledSpeech:1; Echo:1;}	• No feedback was provided by the user of the first endpoint
Second Feedback Tokens	String	String containing list of feedback tokens with boolean flag that indicates if token is set by the user providing feedback from the second endpoint. Example value: {DistortedSpeech:1; ElectronicFeedback:1; BackgroundNoise:1; MuffledSpeech:1; Echo:1;}	• No feedback was provided by the user of the second endpoint
First Feedback Has Audio Issue	Boolean	True if feedback tokens from first endpoint indicate stream had an audio issue, false otherwise.
Second Feedback Has Audio Issue	Boolean	True if feedback tokens from second endpoint indicate stream had an audio issue, False otherwise.
First Feedback Has Video Issue	Boolean	True if feedback tokens from first endpoint indicate stream had a video issue, False otherwise.
Second Feedback Has Video Issue	Boolean	True if feedback tokens from second endpoint indicate stream had a video issue, False otherwise.
First Feedback Has AppSharing Issue	Boolean	True if feedback tokens from first endpoint indicate stream had an app sharing issue. False otherwise.
Second Feedback Has Appsharing Issue	Boolean	True if feedback tokens from second endpoint indicate stream had an app sharing issue. False otherwise.
Audio Signal
First Echo Event Causes	Flags	Flags that indicate the reasons the DeviceEchoEvent is raised on the first endpoint. There might be multiple flags for a single stream. Flags include: BAD_TIMESTAMP - audio sample timestamps from capture or render device used were poor quality POSTAEC_ECHO - high level of echo remained after echo cancellation MIC_CLIPPING - signal level from capture device had significant instances of maximum signal level EVENT_ANLP - audio samples from capture contain high noise. Example value: BAD_TIMESTAMP	• Stream was a non-audio stream • No event causes were reported by the first endpoint
Second Echo Event Causes	Flags	Flags that indicate the reasons the DeviceEchoEvent was raised on the second endpoint. There might be multiple flags for a single stream. Flags include: BAD_TIMESTAMP - audio sample timestamps from capture or render device used were poor quality POSTAEC_ECHO - high level of echo remained after echo cancellation MIC_CLIPPING - signal level from capture device had significant instances of maximum signal level EVENT_ANLP - audio samples from capture contain high noise. Example value: BAD_TIMESTAMP	• Stream was a non-audio stream • No event causes were reported by the first endpoint
First Echo Percent Mic In	Range (percentage)	Percentage of time when echo is detected in the audio from the capture or microphone device prior to echo cancellation by the first endpoint. Values grouped by range. Example value: 068: [5 - 10)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Echo Percent Mic In	Range (percentage)	Percentage of time when echo is detected in the audio from the capture or microphone device prior to echo cancellation by the second endpoint. Values grouped by range. Example value: 068: [5 - 10)	• Indicates a non-audio stream • The second endpoint didn't report data
First Echo Percent Send	Range (percentage)	Percentage of time echo is detected in the audio after echo cancellation by the first endpoint. Values grouped by range. Example value: 068: [5 - 10)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Echo Percent Send	Range (percentage)	Percentage of time echo is detected in the audio after echo cancellation by the second endpoint. Values grouped by range. Example value: 068: [5 - 10)	• Indicates a non-audio stream • The second endpoint didn't report data
First Send Signal Level	Range (dB decibels)	Average energy level of sent audio for audio classified as mono speech, or left channel of stereo speech by the first endpoint. Values grouped by range. Example value: 055: [-15 - -10)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Send Signal Level	Range (dB decibels)	Average energy level of sent audio for audio classified as mono speech, or left channel of stereo speech by the second endpoint. Values grouped by range. Example value: 055: [-15 - -10)	• Indicates a non-audio stream • The second endpoint didn't report data
First Recv Signal Level	Range (dB decibels)	Average energy level of received audio for audio classified as mono speech, or left channel of stereo speech by the first endpoint. Values grouped by range. Example value: 056: [-10 - -5)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Recv Signal Level	Range (dB decibels)	Average energy level of received audio for audio classified as mono speech, or left channel of stereo speech by the second endpoint. Values grouped by range. Example value: 056: [-10 - -5)	• Indicates a non-audio stream • The second endpoint didn't report data
First Send Noise Level	Range (dB decibels)	Average energy level of audio classified as mono noise or stereo left channel noise sent by the first endpoint. Values grouped by range. Example value: 048: [-50 - -45)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Send Noise Level	Range (dB decibels)	Average energy level of audio classified as mono noise or stereo left channel noise by the second endpoint. Values grouped by range. Example value: 048: [-50 - -45)	• Indicates a non-audio stream • The second endpoint didn't report data
First Recv Noise Level	Range (dB decibels)	Average energy level of mono noise or stereo left channel noise received by the first endpoint. Values grouped by range. Example value: 048: [-50 - -45)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Recv Noise Level	Range (dB decibels)	Average energy level of mono noise or stereo left channel noise received by the second endpoint. Values grouped by range. Example value: 048: [-50 - -45)	• Indicates a non-audio stream • The second endpoint didn't report data
First Initial Signal Level RMS	Range (dB decibels)	The root-mean-square (RMS) of the received signal for the first 30 seconds of the call for the first endpoint. See 2.2.1.28.1 Child Elements
Second Initial Signal Level RMS	Range (dB decibels)	The root-mean-square (RMS) of the received signal for the first 30 seconds of the call for the second endpoint. See 2.2.1.28.1 Child Elements for more information.
First RxAGC Signal Level	Range (dB decibels)	Signal level received at the automatic gain control (AGC) for the first inbound audio stream.
Second RxAGC Signal Level	Range (dB decibels)	Signal level received at the automatic gain control (AGC) for the second inbound audio stream.
First RxAGC Noise Level	Range (dB decibels)	Noise level received at the automatic gain control (AGC) for the first inbound audio stream.
Second RxAGC Noise Level	Range (dB decibels)	Noise level received at the automatic gain control (AGC) for the second inbound audio stream.
First Render Loopback Signal Level	Range (dB decibels)	Loopback signal level for the first inbound audio stream.
Second Render Loopback Signal Level	Range (dB decibels)	Loopback signal level for the Second inbound audio stream.
Client Event
First Network Send Quality Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected the network was causing poor quality of the audio sent. Values grouped by range. Example value: 015: [0.01 - 0.02)	• Indicates a non-audio stream • The first endpoint didn't report data
Second Network Send Quality Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected the network was causing poor quality of the audio sent. Values grouped by range. Example value: 015: [0.01 - 0.02)	• Indicates a non-audio stream • The second endpoint didn't report data
First Network Receive Quality Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected the network was causing poor quality of the audio received. Values grouped by range. Example value: 015: [0.01 - 0.02)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Network Receive Quality Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected the network was causing poor quality of the audio received. Values grouped by range. Example value: 015: [0.01 - 0.02)	• Indicates a non-audio stream • The second endpoint didn't report data
First CPU Insufficient Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected the CPU resources available were insufficient and caused poor quality of the audio sent and received. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The first endpoint didn't report data
Second CPU Insufficient Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected the CPU resources available were insufficient and caused poor quality of the audio sent and received. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device HalfDuplex AEC Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected issues and operated the acoustic echo canceler in half-duplex mode, which impacted the ability to have real-time two-way communication. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device HalfDuplex AEC Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected issues and operated the acoustic echo canceler in half-duplex mode, which impacted the ability to have real-time two-way communication. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Render Not Functioning Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected the render device wasn't working properly. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Render Not Functioning Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected the render device wasn't working properly. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Capture Not Functioning Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected the capture device wasn't working properly. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Capture Not Functioning Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected the capture device wasn't working properly. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Glitches Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected as glitches or gaps that caused poor quality of the audio being sent or received. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Glitches Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected as glitches or gaps in the audio that caused poor quality of the audio being sent or received. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Low SNR Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected low speech to noise level that caused poor quality of the audio being sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The first endpoint didn't report data
Second Device Low SNR Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected low speech to noise level that caused poor quality of the audio being sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Low Speech Level Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected low speech level that caused poor quality of the audio being sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Low Speech Level Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected low speech level that caused poor quality of the audio being sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Clipping Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected clipping in the captured audio that caused poor quality of the audio being sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The first endpoint didn't report data
Second Device Clipping Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected clipping in the captured audio that caused poor quality of the audio being sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Echo Event Ratio	Range (ratio)	Fraction of the call that the first endpoint detected echo that caused poor quality of the audio being sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Echo Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected echo that caused poor quality of the audio being sent. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device NearEnd To Echo Ratio Event Ratio	Range (ratio)	Fraction of the call where the first endpoint detected a ratio of near end signal to echo that caused poor quality audio. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device NearEnd To Echo Ratio Event Ratio	Range (ratio)	Fraction of the call that the second endpoint detected a ratio of near end signal to echo level that caused poor quality audio. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Render Zero Volume Event Ratio	Range (ratio)	Fraction of the call that first endpoint detected device render volume is set to 0. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Render Zero Volume Event Ratio	Range (ratio)	Fraction of the call that second endpoint detected device render volume is set to 0. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Render Mute Event Ratio	Range (ratio)	Fraction of the call that first endpoint detected device render is muted. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Render Mute Event Ratio	Range (ratio)	Fraction of the call that second endpoint detected device render is muted. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Multiple Endpoints Event Count	Range (ratio)	Number of times during the call that the first endpoint detected multiple endpoints in the same room or acoustic environment. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Multiple Endpoints Event Count	Range (ratio)	Number of times during the call that the second endpoint detected multiple endpoints in the same room or acoustic environment. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Device Howling Event Count	Range (ratio)	Number of times during the call that the first endpoint detected two or more endpoints in the same room that caused poor quality audio in the form of howling or screeching audio. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Stream was a non-audio stream • The first endpoint didn't report data
Second Device Howling Event Count	Range (ratio)	Number of times during the call that the second endpoint detected two or more endpoints in the same room or acoustic environment that caused poor quality audio in the form of howling or screeching audio. Values grouped by range. Example value: 016: [0.02 - 0.03)	• Indicates a non-audio stream • The second endpoint didn't report data
First Web Video Capture Device Failure Event Count	Integer	The number of times the video capture device reported a failure on the first Teams web client endpoint.	• User wasn't using the Teams Web client.
Second Web Video Capture Device Failure Event Count	Integer	The number of times the video capture device reported a failure on the second Teams web client endpoint.	• User wasn't using the Teams Web client.
Call Diagnostic
Error Report Sender	String	Indicates which endpoint sent the call error report for the stream. This report contains telemetry that might indicate call setup or call drop issues with the call. Example value: First	• Indicates no call error report was received.
Is Media Error	String	Indicates if the call error report for the stream was a media level error or not. This report contains telemetry that might indicate call setup or call drop issues with the call.	• Indicates no call error report was received.
Media Failure Type	Enumeration Possible values: • Midcall • CallSetup • MediaFailureUnknownType • NotMediaFailure	The type of media failure associated with the stream. Note: "NotMediaFailure" doesn't indicate a non-media failure occurred, only that no media failures occurred. MediaFailureUnknownType indicates a media failure is detected, but doesn't fall under the MidCall or CallSetup classifications due to either being an edge case scenario, or missing telemetry.	• Indicates no call error report was received.
Call Classification	Enumeration	Reliability Classification assigned to the call. Possible values: Success, Failure, ClassificationUnavailable
Classification Reason	String	Reason the classification was assigned to the stream.
Test Call Type	Enumeration	Indicates whether this call is a regular call or a test call. If it's a test call, this indicates the type of test call. Possible Values: NonTest, Silent, UserInitiated, Synthetic Meanings: NonTest – Regular Call Silent – Silent Test Call UserInitiated – User initiated test call Synthetic – ST endpoint-initiated call
Session
RTP RTCP Mux	Boolean	True indicates that RTP and RTCP were multiplexed on the same ports. False otherwise.	• The endpoint didn't report data
Stun Version	Integer	Version of STUN protocol used for establishing the call.	• The endpoint didn't report data Example value: 2
Media Relay	String	IP address for Media relay(s) used for the session. Might report a pair of relay separated by a '+' if the stream. Example value: "13.107.8.2 + 13.107.8.2"	• The endpoints didn't report this data
Is Anonymous Join Session	Boolean	True if user joining conference was anonymous, False otherwise.	• No data to determine if user was joined anonymously or not
Has Media Diag Blob	Boolean	True if session had media diagnostics data, False otherwise.	• Some signaling data wasn't collected for this stream
Call Setup Failure Reason	Enumeration	Classification of why media connection couldn't be established for a call. Possible values: Missing FW Deep Packet Inspection Exemption Rule - indicates that network equipment along the path likely prevented the media path from being established due to deep packet inspection rules, possibly due to proxy or firewall rules not being correctly configured. Missing FW IP Block Exemption Rule - indicates that network equipment along the path likely prevented the media path from being established to the Office 365 network, possibly due to proxy or firewall rules not being correctly configured to allow access to IP addresses and ports used for Skype for Business traffic. Other - indicates the media path for the call couldn't be established but the root cause couldn't be classified. Not Media Failure - indicates no issue is detected with the establishment of the media path.	• Call setup failed due to an unknown media issue
Session Type	Enumeration Possible values: Conf, P2P	Indicates if the call session type was a meeting (Conf) or peer-to-peer call (P2P) scenario. Example value: Conf
CDR Response Reason	Enumeration Possible values: 0 or 200 = "OK" 410 = "MediaConnectivityErrors" 480 = "UserUnavailable" 487 = "PickupTimedOut" 603 = "CallDeclined" All other CDR codes = "Other"	Provides the reason for a call session concluding, whether the call was successful or not, and allows for differentiation between incomplete calls (no answer, busy, declined) and failed calls (media establishment). 410 errors might not always correlate with a 'Failure' classification; due to identified exclusions, they might not be considered an impacting media failure. Example value: OK	• A value of "Other" implies response code isn't diagnostically useful outside of Microsoft's engineering teams
Session Id	String	Unique identifier for the session. A session represents communication between two endpoints, either user-user in peer-to-peer calls or user-server in group calls/meetings.
DNS
First DNS Suffix	String	DNS suffix associated with the network adapter reported by the first endpoint. Note this value might be reported for any type of network adapter. Example value: corp.contoso.com	• This value wasn't reported by the endpoint
Second DNS Suffix	String	DNS suffix associated with the network adapter reported by the second endpoint. Note this value might be reported for any type of network adapter. Example value: corp.contoso.com	• This value wasn't reported by the endpoint
Used DNS Resolve Cache	Boolean	True if endpoint used DNS cache to resolve media relay address, False otherwise.	• The endpoint didn't report this data
First DNS Resolution Result	Boolean	The result of DNS resolution on the first endpoint during session establishment. If this value returns true, DNS resolution succeeded.	• Not all endpoints return these values
Second DNS Resolution Result	Boolean	The result of DNS resolution on the second endpoint during session establishment. If this value returns true, DNS resolution succeeded.	• Not all endpoints return these values
First DNS Error	String	Reports what result code (if any) was returned by the DNS lookup process on the first endpoint. Example: success	• Not all endpoints return these values
Second DNS Error	String	Reports what result code (if any) was returned by the DNS lookup process on the second endpoint. Example: success	• Not all endpoints return these values
UserData
First User ObjectId	String	The Active Directory object ID of the first endpoint's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
Second User ObjectId	String	The Active Directory object ID of the second endpoint's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
First MAC Address	String	The media access control (MAC) address of the first endpoint's network device. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
Second MAC Address	String	The media access control (MAC) address of the second endpoint's network device. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
First Sip Uri	String	The Session Initiation Protocol (SIP) URI of the first endpoint's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.	• Populated only for Skype for Business endpoints. • User doesn't have permissions to view EUII.
Second Sip Uri	String	The SIP URI of the first endpoint's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.	• Populated only for Skype for Business endpoints. • User doesn't have permissions to view EUII.
First Phone Number	String	The phone number of the first endpoint's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. The last four digits of PSTN numbers are always obfuscated in CQD irrespective of EUII viewing privileges. Example value: +1425555****	• Populated only for PSTN endpoints. • User doesn't have permissions to view EUII.
Second Phone Number	String	The phone number of the second endpoint's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access. The last four digits of PSTN numbers are always obfuscated in CQD irrespective of EUII viewing privileges. Example value: +1425555****	• Populated only for PSTN endpoints. • User doesn't have permissions to view EUII.
First UPN	String	The user principal name (UPN) of the first endpoint's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.	• Not all UserTypes have UPNs; include the First UserType or First User ObjectId dimensions to learn more about these endpoints.
Second UPN	String	The user principal name (UPN) of the second endpoint's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.	• Not all UserTypes have UPNs; include the Second UserType or Second User ObjectId dimensions to learn more about these endpoints.
First Feedback Text	String	Verbatim feedback text, if any, provided by first endpoint's user at the end of a call. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
Second Feedback Text	String	Verbatim feedback text, if any, provided by second endpoint's user at the end of a call. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
First Client Endpoint Name	String	The machine name of the first endpoint. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
Second Client Endpoint Name	String	The machine name of the second endpoint. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.
First Endpoint Product Name	String	The product name of the first endpoint (either Skype for Business or Microsoft Teams).
Second Endpoint Product Name	String	The product name of the second endpoint (either Skype for Business or Microsoft Teams).
First UserType	Enumeration string	The type of user on the first endpoint. Possible values: User, Server, Anonymous, Application, PSTN, Voicemail, Unknown Unknown - the default value if UserType can't be determined based on the info received. PSTN - a PSTN User. Anonymous - a Teams user or Skype for Business visitor. Application - a bot. User - a Microsoft Entra User, can be either Skype for Business User or Teams User. Server - for conferences, at least one side is a server. Voicemail - the endpoint was answered by the voicemail service.
Second UserType	Enumeration string	The type of user on the second endpoint. Possible values: User, Server, Anonymous, Application, PSTN, Voicemail, Unknown Unknown - the default value if UserType can't be determined based on the info received. PSTN - a PSTN User. Anonymous - a Teams user or Skype for Business visitor. Application - a bot. User - a Microsoft Entra User, can be either Skype for Business User or Teams User. Server - for conferences, at least one side is server. Voicemail - the endpoint was answered by voicemail service.
Organizer ObjectId	String	The Active Directory object ID of the meeting organizer's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.	• User doesn't have permissions to view EUII. • Record is older than 28 days.
Organizer UPN	String	The user principal name (UPN) of the meeting organizer's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.	• User doesn't have permissions to view EUII. • Record is older than 28 days.
Organizer Sip Uri	String	The Session Initiation Protocol (SIP) URI of the meeting organizer's user. Only available for the past 28 days of data and only visible to users with roles allowing EUII access.	• Populated only for Skype for Business endpoints. • User doesn't have permissions to view EUII. • Record is older than 28 days.
PII Scrubbed	Boolean	Indicates if the end-user identifiable information was scrubbed from the record. This happens automatically after a record is 28 days old.
First Is VPN Combined	Boolean	Indicates if Teams determined the first endpoint was connected to a VPN when it received the stream, combining several detection criteria
Second Is VPN Combined	Boolean	Indicates if Teams determined the second endpoint was connected to a VPN when it received the stream, combining several detection criteria
Devices
First Capture Device Form Factor	Enumeration string	The form factor of the audio capture device (microphone) on the first endpoint.	• Not reported by the endpoint.
Second Capture Device Form Factor	Enumeration string	The form factor of the audio capture device (microphone) on the first endpoint.	• Not reported by the endpoint.
First Render Device Form Factor	Enumeration string	The form factor of the audio capture device (speakers) on the first endpoint.	• Not reported by the endpoint.
Second Render Device Form Factor	Enumeration string	The form factor of the audio capture device (speakers) on the first endpoint.	• Not reported by the endpoint.
Video
First Recv Resolution Height	Number (pixels)	Vertical resolution of the video stream received by the first endpoint.	• Stream isn't a video stream
Second Recv Resolution Height	Number (pixels)	Vertical resolution of the video stream received by the second endpoint.	• Stream isn't a video stream
First Recv Resolution Width	Number (pixels)	Horizontal resolution of the video stream received by the first endpoint.	• Stream isn't a video stream
Second Recv Resolution Width	Number (pixels)	Horizontal resolution of the video stream received by the second endpoint.	• Stream isn't a video stream
First Video Duration Seconds	Range (seconds)	Duration of the first endpoint's video stream, measured in seconds and displayed as a range. Example value: 254: [1000 - 1500]	• Not reported by the endpoint.
Second Video Duration Seconds	Range (seconds)	Duration of the second endpoint's video stream, measured in seconds and displayed as a range. Example value: 254: [1000 - 1500]	• Not reported by the endpoint.
First Recv Avg Freeze Duration	Range (seconds)	Average duration in seconds of received video freeze events on the first endpoint.	• Stream isn't a video stream
Second Recv Avg Freeze Duration	Range (seconds)	Average duration in seconds of received video freeze events on the second endpoint.	• Stream isn't a video stream
First Recv Rms Freeze Duration	Range (seconds)	Root-mean-square (RMS) in seconds of received video freeze events on the first endpoint.	• Stream isn't a video stream
Second Recv Rms Freeze Duration	Range (seconds)	Root-mean-square (RMS) in seconds of received video freeze events on the second endpoint.	• Stream isn't a video stream
First Recv Freeze Duration Percent	Range (percentage)	Percentage of the received video duration that was affected by freeze events on the first endpoint.	• Stream isn't a video stream
Second Recv Freeze Duration Percent	Range (percentage)	Percentage of the received video duration that was affected by freeze events on the second endpoint.	• Stream isn't a video stream
First Video Frame Rate Avg	Range (frames per second)	Average rate in frames-per-second of video on the first endpoint.	• Stream isn't a video stream
Second Video Frame Rate Avg	Range (frames per second)	Average rate in frames-per-second of video on the second endpoint.	• Stream isn't a video stream
First Video Bit Rate Avg	Range (kbps)	Average bit rate in kilobytes-per-second of video on the first endpoint.	• Stream isn't a video stream
Second Video Bit Rate Avg	Range (kbps)	Average bit rate in kilobytes-per-second of video on the second endpoint.	• Stream isn't a video stream
First Time To First Frame	Range (milliseconds)	The number of milliseconds between the video subscription and the first frame of the stream received by the first endpoint.	• Stream is not a video stream
Second Time To First Frame	Range (milliseconds)	The number of milliseconds between the video subscription and the first frame of the stream received by the second endpoint.	• Stream is not a video stream
First Video Bitrate Max	Range (kbps)	The maximum inbound video bitrate as received by the first endpoint at any point of the call.	• Stream is not a video stream
Second Video Bitrate Max	Range (kbps)	The maximum inbound video bitrate as received by the second endpoint at any point of the call.	• Stream is not a video stream
PSTN
First PSTN Country Region	String	If FirstIsCaller is true, First PSTN Country Region is the caller's country. If it's false, then Second PSTN Country region is the caller's country. Example: US
Second PSTN Country Region	String	If FirstIsCaller is false, Second PSTN Country Region is the caller's country. If it's true, then First PSTN Country region is the caller's country. Example: US
PSTN Trunk FQDN	String	FQDN is the fully qualified domain name (FQDN) of the Session Border Controller (SBC). Example: sbcgw.contoso.com
PSTN Carrier Name	String	The company that is authorized by regulatory agencies to operate a telecommunications system. Example: Colt	Direct Routing doesn't have a carrier. Only a calling plan has a carrier.
PSTN Call Type	String	This string combines the service type and call type. Service type: user -> calling plan byot -> direct routing conf -> audio conferencing ucap -> voice app emergency -> emergency number Call type: In -> inbound call Out -> outbound call Out_transfer -> outbound call gets transferred to third person Out_forward -> outbound call gets forwarded to third person Out_conf -> outbound call with ad-hoc PSTN participant Example: ByotIn
PSTN Connectivity Type	String	PSTN connectivity type includes Direct Routing, Calling Plan, Operator Connect, or Teams Phone Mobile. Example: Direct Routing
PSTN Final SIP Code Phrase	String	The reason phrase corresponding to the SIP response code and Microsoft response code. Example: BYE
PSTN Call End Sub Reason	Int	A response code sent out from the Microsoft component that indicates specific actions that occurred. Example: 540000
PSTN Event Type	String	An event type that provides telemetry. Example: End
PSTN Event Info Time	Date	The time in UTC format when an outbound call starts from the Microsoft network or an inbound call reaches the Microsoft network. Example: 2020-02-06 20:57:53.1750000
PSTN MP Location	String	The Media Processor location will show the media path when in non-bypass mode. Example: USWE
PSTN Trunk Call Id	String	The SIP Call ID between the PSTN SIP Trunk and the SIP Proxy. Direct Routing customers can use this value to troubleshoot PSTN calling scenarios. Cross-reference the Trunk Call ID with the logs of the Session Border Controller or Media Gateway.
PSTN Trunk User Agent	String	The manufacturer, device type, and software revision for the PSTN SIP trunk's Session Border Controller or Media Gateway. Example: Cisco-SIPGateway/IOS-17.9.4a
PSTN Trunk SBC Version	String	The manufacturer, model name, and software revision for the PSTN SIP trunk's Session Border Controller or Media Gateway. Example: Cisco UBE/ISR4331/IOS-17.9.4a
PSTN Call End Reason	Int	A three-digit integer response code shows the final status of the call. For more information about SIP call end reasons, see the List of SIP response codes. Example: 404
Is PSTN Conferencing	Boolean	Indicates if a call or stream was involved in a PSTN conferencing scenario
Voice Apps (Preview)		For this category, see Auto Attendant & Call Queue Historical Report for more information.)
Auto Attendant Identity	String	Name of the resource account attached to the Auto Attendant.	• User doesn't have permissions to view EUII. • Record is older than 28 days.
Auto Attendant Chain Index	Integer	Order of the Auto Attendant in the call.
Auto Attendant Chain Start Time	String	The Auto Attendant call start time and date.
Auto Attendant Chain Duration Seconds	Integer	The duration of the call in the Auto Attendant, measured in seconds.
Auto Attendant Caller Action Count	Integer	Count of actions selected by the caller in an Auto Attendant during the call.
Auto Attendant Call Flow	String	Encapsulates the different states of the Auto Attendant call.
Auto Attendant Transfer Action	Enumeration	The call transfer target type.
Auto Attendant Call Result	Enumeration	Final call result with the Auto Attendant.
Auto Attendant Directory Search Method	Enumeration	The last address book search method used.
Auto Attendant Count	Integer	Number of Auto Attendants involved in the call.
Call Queue Identity	String	Name of the resource account attached to the Call Queue.	• User doesn't have permissions to view EUII. • Record is older than 28 days.
Call Queue Is Conference Mode	Boolean	If True, Call Queue is configured to use conference mode otherwise Call Queue is configured to use transfer mode.
Call Queue Agent Count	Integer	Number of agents configured in the queue.
Call Queue Agent Opt In Count	Integer	Number of configured agents that have opted into the queue.
Call Queue Target Type	Enumeration	The call redirection target type.
Call Queue Call Result	Enumeration	The Call Queue call final state.
Call Queue Final State Action	Enumeration	The Call Queue final action.
Call Queue Timed Out Time	Integer	The configured timed out value for the Call Queue.
Transferred from Call Queue Identity	String	Name of the resource account attached to the Call Queue that transferred the call.	• User doesn't have permissions to view EUII. • Record is older than 28 days.
Is Auto Attendant Involved	Boolean	If True, an Auto Attendant was involved in a given call or stream.
Is Call Queue Involved	Boolean	If True, a Call Queue was involved in a given call or stream.
Meeting
Scheduling Source App Id	String	The AppID of the first or third-party scheduling client that booked the meeting.	The scheduling client hasn't provided this parameter through its telemetry.
Total User Count	Integer	Total number of unique users associated with a query.
Common
First ACS Resource ID	String	Immutable resource identifier of the Azure Communication Service associated with the first endpoint. Example: 00000000-0000-0000-0000-000000000000	Endpoint isn't using Azure Communication Services APIs
Second ACS Resource ID	String	Immutable resource identifier of the Azure Communication Service associated with the second endpoint. Example: 00000000-0000-0000-0000-000000000000	Endpoint isn't using Azure Communication Services APIs
Teams Events
Teams Events Meeting Role	String	Identifies if the user was an Attendee in a Teams Event
Teams Events Attendee ECDN Name	String	Identifies the Enterprise Content Delivery Network (eCDN) to which the attendee was connected when viewing the event
Teams Events Attendee ECDN Script Load Error	String	Provides the reason and relevant URL for when script load errors are encountered by attendees.
Teams Events Attendee Stream Retry Count	Integer	The number of retries per minute that occurred while an attendee was watching an event stream.
Meeting Type	String	Indicates whether a meeting was a regular Teams meeting or a Teams Live Event.
Teams Events Time To Connect Media	Integer	The amount of time required for playback to begin after signaling has completed.
Teams Events Attendee Stream Buffering Rate	Range (Ratio)	Indicates the ratio of the stream spent waiting for video buffering versus the overall stream playback time.
Teams Events Attendee Average Stream Download Bit Rate	Integer (bits/second)	The length of the stream viewed by the user, in seconds.
VDI
First Client VDI Desktop Version	String	The VDI Teams client version of the first endpoint. Example: 24165.1414.2987.41	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Second Client VDI Desktop Version	String	The VDI Teams client version of the second endpoint. Example: 24165.1414.2987.41	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
First Client VDI Mode	String	The vdiMode value of the first endpoint. Example: 3100 First digit = `[1,2 for Citrix]` `[3 for VMware]` `[5 for AVD/Windows 365]` Second digit = `[0 not optimized]` `[1 optimized with WebRTC]` `[2 optimized with SlimCore]`	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Second Client VDI Mode	String	The vdiMode value of the second endpoint. Example: 3100 First digit = `[1,2 for Citrix]` `[3 for VMware]` `[5 for AVD/Windows 365]` Second digit = `[0 not optimized]` `[1 optimized with WebRTC]` `[2 optimized with SlimCore]`	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
First Client VDI Connected State	String	Indicates the VDI connected state of the first endpoint. Example: Connected	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Second Client VDI Connected State	String	Indicates the VDI connected state of the second endpoint. Example: Connected	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
First Client VDI Provider Version	String	The VDI provider client version of the first endpoint. Example: 24.2.0.187	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Second Client VDI Provider Version	String	The VDI provider client version of the second endpoint. Example: 24.2.0.187	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
First Client VDI Is Optimized	String	Indicates if the first endpoint's VDI client is operating in optimized mode. Example: VDI 2.0 Optimized	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Second Client VDI Is Optimized	String	Indicates if the second endpoint's VDI client is operating in optimized mode. Example: VDI 2.0 Optimized	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
First Client VDI OS Version	String	Version of the operating system running on the first VDI client endpoint. Example: 10.0.19045	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Second Client VDI OS Version	String	Version of the operating system running on the second VDI client endpoint. Example: 10.0.19045	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
First Client VDI Media Stack Version	String	Version of the SlimCore media engine running on the first VDI client endpoint. Example: 2024.14.1.1	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Second Client VDI Media Stack Version	String	Version of the SlimCore media engine running on the second VDI client endpoint. Example: 2024.14.1.1	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
First Client VDI Plugin Version	String	Version of the Teams plugin for the first VDI client endpoint. Example: 2024.15.1.1	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Second Client VDI Plugin Version	String	Version of the Teams plugin for the second VDI client endpoint. Example: 2024.15.1.1	• Endpoint isn't running on VDI. • Data wasn't provided by the endpoint
Datapair
Network Connection Detail Pair	Enumerated pair Possible values: wifi : wifi wifi : wired Wired : wifi Wired : Wired MobileBB : MobileBB MobileBB : Other MobileBB : Tunnel MobileBB : wifi MobileBB : Wired Other : Other Other : wifi Other : Wired Tunnel : Tunnel Tunnel : wifi Tunnel : Wired : MobileBB : Other : Tunnel : wifi : Wired :	Pair of network connection detail for the first and second endpoint.	• Endpoint network connectivity type was unknown. This might happen if the call couldn't be established.
User Agent Category Pair	Enumerated pair	Pair of User Agent Category for first and second endpoint. Example value: AV-MCU : OC	• Endpoint user agent wasn't a known type
Is Server Pair	Enumerated pair Possible values: Client : Client Client : Server Server : Server	Pair of identification of first and second endpoints as either Client or Server.	no Blank values
Connectivity Ice Pair	Enumerated pair Possible values: DIRECT : DIRECT DIRECT : FAILED DIRECT : HTTP FAILED : FAILED FAILED : RELAY HTTP : RELAY : : DIRECT : FAILED : HTTP : RELAY	Pair of type of ICE connectivity used by each endpoint.	• ICE connectivity used by endpoint wasn't known or reported
OS Pair	Enumerated pair	Pair of the OS name and version for first and second endpoint. Example value: Windows 10 : Windows 10	• OS name couldn't be parsed or wasn't reported by endpoint
Tenant Id Pair	Enumerated pair	Pair of the tenant IDs for first and second endpoint. Example value: 00000000 — 0000 - 0000 - 0000 — 000000000000 : 00000000 — 0000 - 0000 - 0000 — 000000000000	• The tenant identifier couldn't be determined. This might happen if endpoint is signed in to an on-premises Skype for Business Server deployment.
Building Name Pair	Enumerated pair	Pair of the building name for the first and second endpoint.	• The building name for an endpoint couldn't be determined. Missing values could be because the endpoint is located outside the corporate network, or is accessing the network from a site without a subnet mapping. Example value: Main Building : Branch Site Building
Inside Corp Pair	Enumerated pair Possible values: Inside : Inside Inside : Outside Outside : Outside	Pair showing if the endpoints were located inside or outside the corporate network based on the subnet mapping.
Scenario
Scenario Pair	Enumerated pair	Pair showing if the endpoints were located inside or outside the corporate network based on the subnet mapping and the network connection detail. Note: The pairs are separated by '--'. Example value: Client-Inside--Client-Inside-wifi	• The network connectivity type was unknown for either or both endpoints.

Measurements

Many Measurement values can also be used as filters. The following table lists the measurements currently available in CQD, shown in the order listed in the Query Editor

Measure Name	Units	Description
Total Stream Count	Number of streams	Number media streams regardless of type of media, including reliability/diagnostics streams that might not have a media type.
Total CDR Available Stream Count	Number of streams	Number of media streams with reliability/diagnostics information available. See Call detail recording (CDR) in Skype for Business Server
Total Media Failed Stream Count	Number of streams	Number of streams where either media path couldn't be established or didn't terminate normally.
Total Call Setup Failed Stream Count	Number of streams	Number of streams where media path couldn't be established between the endpoints at the start of the call.
Total Call Dropped Stream Count	Number of streams	Number of streams where media path didn't terminate normally.
Total Media Succeeded Stream Count	Number of streams	Number of streams where media path was established and terminated normally.
Total Call Setup Succeeded Stream Count	number of streams	Number of streams where media path could be established between the endpoints at the start of the call.
Total Call Setup Failure Percentage	Percentage	Percentage of all streams where media path couldn't be established between the endpoints at the start of the call.
Total Call Dropped Failure Percentage	Percentage	Percentage of successfully established streams where media path didn't terminate normally.
Total Short Call Count	Number of streams	Number of calls with a duration equal to or less than five seconds.
Total Answer Seizure Ratio	Ratio	Ratio of calls with duration less than 5 seconds over the total number of calls.
Total Short Call Percentage	Percentage	Percentage of total calls less than 1 minute long.
Total Media Failure Percentage	Percentage	Percentage of all streams where either media path couldn't be established or didn't terminate normally.
Media Failed Due To Firewall DPI Stream Count	Number of streams	Number of streams that failed to be established due to network equipment blocking access due to deep packet inspection not allowing Skype for Business traffic. These failures typically indicate a proxy, firewall, or other network security device isn't correctly configured. These devices might be blocking access to the IP address and ports that are used by Skype for Business in Microsoft 365 or Office 365.
Firewall DPI Media Failure Percentage	Percentage	Percentage of streams that failed to be established due to network equipment blocking access due to deep packet inspection not allowing Skype for Business traffic. These failures typically indicate a proxy, firewall, or other network security device isn't correctly configured. These devices might be blocking access to the IP address and ports that are used by Skype for Business in Microsoft 365 or Office 365.
Media Failed Due To Firewall IP Blocked Stream Count	Number of streams	Number of streams that failed to be established due to network equipment blocking access to Skype for Business servers. These failures typically indicate a proxy, firewall, or other network security device isn't correctly configured. These devices might be blocking access to the IP address and ports that are used by Skype for Business in Microsoft 365 or Office 365.
Firewall IP Blocked Media Failure Percentage	Percentage	Percentage of streams that failed to be established because network equipment blocked access to Skype for Business servers. These failures typically indicate a proxy, firewall, or other network security device isn't correctly configured. These devices might be blocking access to the IP address and ports that are used by Skype for Business in Microsoft 365 or Office 365.
Media Failed Due To Other Stream Count	Number of streams	Number of streams where media path couldn't be established between the endpoints due to an undetermined/unclassified reason.
Other Media Failure Percentage	Percentage	Percentage of streams where media path couldn't be established between the endpoints due to an undetermined/unclassified reason.
Total Call Count	Number of calls	Number of distinct calls, either as peer-to-peer calls or call legs within a conference.
Total CDR Available Call Count	Number of streams	Total number of calls with reliability/diagnostics information available. There's an up to 0.2% error for this measure. See note below for details.
Total Media Failed Call Count	Number of streams	Number of calls where media path couldn't be established between the endpoints. There's an up to 0.2% error for this measure. See note below for details.
Audio Stream Count	Number of streams	Number of audio streams.
Audio Poor Stream Count	Number of streams	Number of audio streams classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Audio Good Stream Count	Number of streams	Number of audio streams classified as good based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Audio Unclassified Stream Count	Number of streams	Number of audio streams that didn't have sufficient data to be classified as good or poor based on network metrics listed here: Stream Classification in Call Quality Dashboard. Unclassified streams are omitted from 'Poor Percentage' calculations.
Audio Poor Percentage	Percentage	Percentage of classified audio streams that were classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Audio OnePercent PacketLoss Count	Number of streams	Number of audio streams with packet loss greater than 1%.
Audio OnePercent PacketLoss Percentage	Percentage	Percentage of all audio streams with packet loss greater than 1%.
Audio Poor Due To Jitter Count	Number of streams	Number of audio streams where the jitter metric exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
Audio Poor Due To PacketLoss Count	Number of streams	Number of audio streams where the packet loss metric exceeds thresholds listed here: Stream Classification in Call Quality Dashboard
Audio Poor Due To Degradation Count	Number of streams	Number of audio streams where the degradation metric exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
Audio Poor Due To RoundTrip Count	Number of streams	Number of audio streams where the round trip exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
Audio Poor Due To ConcealedRatio Count	Number of streams	Number of audio streams where the concealed ratio exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
Audio SLA Good Call Count	Number of calls	Number of audio calls within scope of the Skype for Business Voice Quality SLA (Volume Licensing for Microsoft Products and Online Services) classified as meeting the network performance targets.
Audio SLA Poor Call Count	Number of calls	Number of audio calls within scope of the Skype for Business Voice Quality SLA (Volume Licensing for Microsoft Products and Online Services) classified as not meeting the network performance targets.
Audio SLA Call Count	Number of calls	Number of audio calls within scope of the Skype for Business Voice Quality SLA (Volume Licensing for Microsoft Products and Online Services).
Audio SLA Good Call Percentage	Percentage	Percentage of audio calls within scope of the Skype for Business Voice Quality SLA (Volume Licensing for Microsoft Products and Online Services) that were classified as meeting the network performance targets.
Audio Good Call Stream Count	Number of streams	Number of audio streams where both audio streams in the call (call-leg) aren't classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Audio Poor Call Stream Count	Number of streams	Number of audio streams where at least one audio stream in the call (call-leg) was classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Audio Unclassified Call Stream Count	Number of streams	Number of audio streams where both audio streams in the call (call-leg) couldn't be classified due to missing network metrics.
Audio Poor Call Level Percentage	Percentage	Percentage of all audio streams where at least one audio stream in the call (call-leg) was classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Audio Call Count	Number	Number of calls involving audio. There's an up to 0.2% error for this measure. See note below for details.
Audio Poor Call Count	Number	Number of calls involving audio classified as poor. There's an up to 0.2% error for this measure. See note below for details.
Audio Good Call Count	Number of calls	Number of calls involving audio classified as good. There's an up to 0.2% error for this measure. See notes below for details.
Audio Unclassified Call Count	Number of calls	Number of calls involving audio that couldn't be classified Good or Poor. Unclassified calls are omitted from 'Poor Call Percentage' calculations. There's an up to 0.2% error for this measure. See note below for details.
Audio Poor Call Percentage	Percentage of calls	Percentage of classified calls involving audio classified as poor. There's an up to 0.2% error for this measure. See note below for details.
First Noise Suppression Model Download Failure Count	Number of streams	Number of outbound audio streams where First endpoints failed to download the noise suppression model successfully.
Second Noise Suppression Model Download Failure Count	Number of streams	Number of outbound audio streams where Second endpoints failed to download the noise suppression model successfully.
First Noise Suppression Model Download Failure Percentage	Percentage of streams (Decimal)	Percentage of outbound audio streams where First endpoints failed to download the noise suppression model successfully.
Second Noise Suppression Model Download Failure Percentage	Percentage of streams (Decimal)	Percentage of outbound audio streams where Second endpoints failed to download the noise suppression model successfully.
AppSharing Stream Count	Number of streams	Number of RDP-based application sharing streams.
AppSharing Poor Due To SpoiledTilePercentTotal Count	Number of streams	Number of application sharing streams where the spoiled tile percent total metric exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
AppSharing Poor Due To RelativeOneWayAverage Count	Number of streams	Number of application sharing streams where the relative one-way average metric exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
AppSharing Poor Due To RDPTileProcessingLatencyAverage Count	Number of streams	Number of application sharing streams where the RDP tile processing latency average exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
AppSharing Poor Stream Count	Number of streams	Number of application sharing streams classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
AppSharing Good Stream Count	Number of streams	Number of application sharing streams classified as good based on network metrics listed here: Stream Classification in Call Quality Dashboard.
AppSharing Unclassified Stream Count	Number of streams	Number of application sharing streams that didn't have sufficient data to be classified as good or poor based on network metrics listed here: Stream Classification in Call Quality Dashboard. Unclassified streams are omitted from 'Poor Percentage' calculations.
AppSharing Poor Percentage	Percentage	Percentage of classified application sharing streams that were classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Video Stream Count	Number of streams	Number of video streams.
Video Poor Due To VideoPostFecplr Count	Number of streams	Number of video streams where the Video Post Fec plr exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
Video Poor Due To VideoLocalFrameLossPercentageAvg Count	Number of streams	Number of video streams where the Video Local Frame Loss Percentage Avg exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
Video Poor Due To VideoFrameRateAvg Count	Number of streams	Number of Video streams where the Video Frame Rate Avg exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
Video Poor Due to Freeze Count	Number of streams	Number of main video streams where the Video Freeze metric exceeds thresholds listed here. Stream Classification in Call Quality Dashboard. This field is specific to Microsoft Teams only
Video Poor Stream Count	Number of streams	Number of video streams classified as poor based on network metrics listed here Stream Classification in Call Quality Dashboard.
Video Good Stream Count	Number of streams	Number of video streams classified as good based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Video Unclassified Stream Count	Number of streams	Number of video streams that didn't have sufficient data to be classified as good or poor based on network metrics listed here: Stream Classification in Call Quality Dashboard. Unclassified streams are omitted from 'Poor Percentage' calculations.
Video Poor Percentage	Percentage	Percentage of classified video streams that were classified as poor based on network metrics listed here Stream Classification in Call Quality Dashboard.
Video Call Count	Number of calls	Number of calls involving video. There's an up to 0.2% error for this measure. See note below for details.
Video Poor Percentage Due to Freeze	Percentage	Percentage of main video streams that were classified as poor based on the Video Poor metric Due to Freeze listed here Stream Classification in Call Quality Dashboard. This field is specific to Microsoft Teams only
VBSS Stream Count	Number of streams	Number of video-based-screen sharing streams.
VBSS Poor Due To VideoPostFecplr Count	Number of streams	Number of video-based-screen-sharing streams where the Video Post Fec plr exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
VBSS Poor Due To VideoLocalFrameLossPercentageAvg Count	Number of streams	Number of video-based-screen-sharing streams where the Video Local Frame Loss Percentage Avg exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
VBSS Poor Due To VideoFrameRateAvg Count	Number of streams	Number of video-based-screen-sharing streams where the Video Frame Rate Avg exceeds thresholds listed here: Stream Classification in Call Quality Dashboard.
VBSS Poor Stream Count	Number of streams	Number of video-based-screen-sharing streams classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
VBSS Good Stream Count	Number of streams	Number of video-based-screen-sharing streams classified as good based on network metrics listed here: Stream Classification in Call Quality Dashboard.
VBSS Unclassified Stream Count	Number of streams	Number of video-based-screen-sharing streams that didn't have sufficient data to be classified as good or poor based on network metrics listed here: Stream Classification in Call Quality Dashboard. Unclassified streams are omitted from 'Poor Percentage' calculations.
VBSS Poor Percentage	Percentage	Percentage of classified video-based-screen-sharing streams that classified as poor based on network metrics listed here: Stream Classification in Call Quality Dashboard.
Audio Device Failure Percentage	Percentage	Percentage of all audio streams in which an audio capture or render device failure is detected.
Audio Device General Failure Percentage	Percentage	Percentage of all audio streams in which a general hardware failure on an audio device is detected.
No Mic Device Enumerated Failure Count	Number of streams	Total number of audio streams in which no audio capture devices were detected.
No Mic Device Enumerated Failure Percentage	Percentage	Percentage of all audio streams in which no audio capture devices were detected.
Mic Initialization Failure Count	Number of streams	Total number of audio streams in which a failure occurred during the hardware initialization of the microphone device.
Mic Initialization Failure Percentage	Percentage	Percentage of all audio streams in which a failure occurred during the hardware initialization of the microphone device.
Speaker Initialization Failure Count	Number of streams	Total number of audio streams in which a failure occurred during the hardware initialization of the audio render device.
Speaker Initialization Failure Percentage	Percentage	Percentage of all audio streams in which a failure occurred during the hardware initialization of the audio render device.
No Speaker Device Enumerated Failure Count	Number of streams	Total number of audio streams in which no audio render devices were detected.
No Speaker Device Enumerated Failure Percentage	Percentage	Percentage of all audio streams in which no audio render devices were detected.
Mic Is Silent Failure Count	Number of streams	Total number of audio streams in which no audio is detected from the microphone while unmuted.
Mic Is Silent Failure Percentage	Percentage	Percentage of all audio streams in which no audio is detected from the microphone while unmuted.
Audio Device Failure Count	Number of streams	Number of streams with either a mic or speaker failure.
First Audio Device General Failure Rate	Percentage	Percentage of all audio streams with a general audio hardware failure on the first endpoint.
Second Audio Device General Failure Rate	Percentage	Percentage of all audio streams with a general audio hardware failure on the second endpoint.
First Mic Device Failure Rate	Percentage	Percentage of all audio stream in which an audio capture device failure is detected on the first endpoint.
Second Mic Device Failure Rate	Percentage	Percentage of all audio stream in which an audio capture device failure is detected on the second endpoint.
First Speaker Device Failure Rate	Percentage	Percentage of all audio stream in which an audio render device failure is detected on the first endpoint.
Second Speaker Device Failure Rate	Percentage	Percentage of all audio stream in which an audio render device failure is detected on the second endpoint.
Avg Call Duration	Seconds	Average duration of streams in seconds.
Total Audio Stream Duration (Minutes)	Minutes	Total audio stream duration in minutes in the selected time range.
Total Stream Duration (Minutes)	Minutes	The total duration of streams as measured in minutes based on the selected filters. Can be filtered to specific Media Types and Stream Directions for increased precision.
First Feedback Rating Avg	User rating (1-5)	Average rating of streams reported by the user using the first endpoint. Calls are rated from 1-5 and the rating is applied to all streams of the call.
Second Feedback Rating Avg	User rating (1-5)	Average rating of streams reported by the user using the second endpoint. Calls are rated from 1-5 and the rating is applied to all streams of the call.
First Feedback Rating Count	Number of rated streams	Number of streams rated by the user using the first endpoint. Calls are rated from 1-5 and the rating is applied to all streams of the call.
Second Feedback Rating Count	Number of rated streams	Number of streams rated by the user using the second endpoint. Calls are rated from 1-5 and the rating is applied to all streams of the call.
First Feedback Rating Poor Count	Number of rated streams	Number of streams rated by the user using the first endpoint as either 1 or 2. Calls are rated from 1-5 and the rating is applied to all streams of the call.
Second Feedback Rating Poor Count	Number of rated streams	Number of streams rated by the user using the second endpoint as either 1 or 2. Calls are rated from 1-5 and the rating is applied to all streams of the call.
First Feedback Rating Poor Percentage	Number of rated streams	Percentage of all rated streams that are rated by the user using the first endpoint as either 1 or 2. Calls are rated from 1-5 and the rating is applied to all streams of the call.
Second Feedback Rating Poor Percentage	Number of rated streams	Percentage of all rated streams that are rated by the user using the second endpoint as either 1 or 2. Calls are rated from 1-5 and the rating is applied to all streams of the call.
First Feedback Token Audio Issue Count	Number rated streams	Number of streams where user using the first endpoint indicated an issue with audio.
Second Feedback Token Audio Issue Count	Number rated streams	Number of streams where user using the second endpoint indicated an issue with audio.
First Feedback Token Video Issue Count	Number of rated streams	Number of streams where user using the first endpoint indicated an issue with video.
Second Feedback Token Video Issue Count	Number of rated streams	Number of streams where user using the second endpoint indicated an issue with video.
Avg First Echo Percent Mic In	Percentage	Average percentage of time during the stream that the first endpoints detected echo in the audio from the capture or microphone device prior to echo cancellation.
Avg Second Echo Percent Mic In	Percentage	Average percentage of time during the stream that the second endpoints detected echo in the audio from the capture or microphone device prior to echo cancellation.
Avg First Echo Percent Send	Percentage	Average percentage of time during the stream that the first endpoints detected echo in the audio from the capture or microphone device after echo cancellation.
Avg Second Echo Percent Send	Percentage	Average percentage of time during the stream that the second endpoints detected echo in the audio from the capture or microphone device after echo cancellation.
Avg First Initial Signal Level RMS	Range (Decibels)	Average of the root-mean-square (RMS) of the received signal for the first 30 seconds of the call for the first endpoint. See 2.2.1.28.1 Child Elements for more information
Avg Second Initial Signal Level RMS	Range (Decibels)	Average of the root-mean-square (RMS) of the received signal for the first 30 seconds of the call for the second endpoint.
Avg First RxAGC Signal Level	Range (Decibels)	Average signal level received at the automatic gain control for the first inbound audio stream.
Avg Second RxAGC Signal Level	Range (Decibels)	Average signal level received at the automatic gain control for the second inbound audio stream.
Avg First RxAGC Noise Level	Range (Decibels)	Average noise level received at the automatic gain control for the first inbound audio stream.
Avg Second RxAGC Noise Level	Range (Decibels)	Average noise level received at the automatic gain control for the second inbound audio stream.
Avg First Render Loopback Signal Level	Range (Decibels)	Average level of first speaker loopback signal (after any device offload effects are applied).
Avg Second Render Loopback Signal Level	Range (Decibels)	Average level of second speaker loopback signal (after any device offload effects are applied).
Avg First Audio Send Signal Level	Decibels	Average energy level of sent audio for audio classified as mono speech, or left channel of stereo speech sent by first endpoints.
Avg Second Audio Send Signal Level	Decibels	Average energy level of sent audio for audio classified as mono speech, or left channel of stereo speech sent by second endpoints.
Avg First Audio Received Signal Level	Decibels	Average energy level of received audio for audio classified as mono speech, or left channel of stereo speech by the first endpoints.
Avg Second Audio Received Signal Level	Decibels	Average energy level of received audio for audio classified as mono speech, or left channel of stereo speech by the second endpoints.
Avg First Audio Send Noise Level	Decibels	Average energy level of sent audio for audio classified as mono noise or left channel of stereo noise by the first endpoints.
Avg Second Audio Send Noise Level	Decibels	Average energy level of sent audio for audio classified as mono noise or left channel of stereo noise by the second endpoints.
Avg First Audio Received Noise Level	Decibels	Average energy level of received audio for audio classified as mono noise or left channel of stereo noise by the first endpoints.
Avg Second Audio Received Noise Level	Decibels	Average energy level of received audio for audio classified as mono noise or left channel of stereo noise by the second endpoints.
First Audio Echo BAD_TIMESTAMP Count	Number of streams	Number of streams where the echo is caused by bad device timestamps from the first endpoints that limited echo cancellation in audio sent.
First Audio Echo POSTAEC_ECHO Count	Number of streams	Number of streams where the high echo is detected after echo cancellation for audio sent by the first endpoints.
First Audio Echo EVENT_ANLP Count	Number of streams	Number of streams where the first endpoints detected noise in the captured audio that limited echo cancellation in audio sent.
First Audio Echo EVENT_DNLP Count	Number of streams	Number of streams where the first endpoints detected noise in the captured audio that limited echo cancellation in audio sent.
First Audio Echo MIC_CLIPPING Count	Number of streams	Number of streams where the first endpoints detected clipping in the captured audio that limited echo cancellation in audio sent.
First Audio Echo BAD_STATE Count	Number of streams	Number of streams where the first endpoints detected issues with the internal state that limited echo cancellation in audio sent.
Second Audio Echo BAD_TIMESTAMP Count	Number of streams	Number of streams where the echo is caused by bad device timestamps from the second endpoints that limited echo cancellation in audio sent.
Second Audio Echo POSTAEC_ECHO Count	Number of streams	Number of streams where the high echo is detected after echo cancellation for audio sent by the second endpoints.
Second Audio Echo EVENT_ANLP Count	Number of streams	Number of streams where the second endpoints detected noise in the captured audio that limited echo cancellation in audio sent.
Second Audio Echo EVENT_DNLP Count	Number of streams	Number of streams where the second endpoints detected noise in the captured audio that limited echo cancellation in audio sent.
Second Audio Echo MIC_CLIPPING Count	Number of streams	Number of streams where the second endpoints detected clipping in the captured audio that limited echo cancellation in audio sent.
Second Audio Echo BAD_STATE Count	Number of streams	Number of streams where the second endpoints detected issues with the internal state that limited echo cancellation in audio sent.
Avg Audio Degradation	Mean Opinion Score (0-5)	Average Network Mean Opinion Score degradation for streams. Represents how much the network loss and jitter impact the quality of received audio.
Avg Jitter	Milliseconds	Average network jitter for streams in milliseconds. This jitter metric is inter-arrival jitter as reported in the generic network payload, and is reported for all stream types.
Avg Jitter Max	Milliseconds	Maximum network jitter for streams in milliseconds. This jitter metric is inter-arrival jitter as reported in the generic network payload, and is reported for all stream types.
Avg Packet Loss Rate	Ratio	Average of average percentage of packets lost computed using 5 second interval for streams. 0.1 indicates 10% packet loss.
Avg Packet Loss Rate Max	Ratio	Average of maximum percentage of packets lost during any 5 second interval for streams. 0.1 indicates 10% packet loss.
Avg Send Listen MOS	Number	Average of the prediction of the Wideband Listening Quality Mean Opinion Score (MOS-LQ) of the audio stream that is being sent from the user.
Avg Overall Avg Network MOS	Mean Opinion Score (0-5)	Average or average network Mean Opinion Score for streams. Represents the average predicted quality of received audio factoring in network loss, jitter, and codec.
Avg Ratio Concealed Samples	Ratio	Average of average ratio of the number of audio frames with samples generated by packet loss concealment to the total number of audio frames for streams. 0.1 indicates 10% of frames contained concealed samples.
Avg Conceal Ratio Max	Ratio	Average of the maximum ratios of the number of audio frames with samples generated by packet loss concealment to the total number of audio frames for streams. 0.1 indicates 10% of frames contained concealed samples.
Avg Ratio Stretched Samples	Ratio	Average of average ratio of the number of audio frames with samples that are stretched to compensate for jitter or loss to the total number of audio frames for streams. 0.1 indicates 10% audio frames contained stretched samples.
Avg Healer Packet Drop Ratio	Range (Ratio)	Average ratio of audio packets dropped by healer over total number of audio packets received by healer.
Avg Healer FEC Packet Used Ratio	Range (Ratio)	Average ratio of used FEC packets over total number of received FEC packets.
Avg Round Trip	Milliseconds	Average of average network propagation round-trip time computed as specified in RFC3550 in milliseconds for streams.
Avg Round Trip Max	Milliseconds	Average of maximum network propagation round-trip time computed as specified in RFC3550 in milliseconds for streams.
Avg Packet Utilization	Number of packets	Average number of Real-Time Transport Protocol (RTP) packets sent per second in the session.
Avg Network Jitter	Milliseconds	Average of network jitter computed over 20 second windows during the session. This metric is contained in the audio payload of the QoE. Stream types other than audio won't report a value for this measurement.
Avg Network Jitter Max	Milliseconds	Average of maximum network jitter in milliseconds computed over 20 second windows during the session. This metric is contained in the audio payload of the QoE. Stream types other than audio won't report a value for this measurement.
Avg Network Jitter Min	Milliseconds	Average of minimum network jitter values in milliseconds computed over 20 second windows during the session for streams. This metric is contained in the audio payload of the QoE. Stream types other than audio won't report a value for this measurement.
Avg Jitter Buffer Size	Milliseconds	Average size of jitter buffer during session. This metric is contained in the audio payload of the QoE. Stream types other than audio won't report a value for this measurement.
Avg Jitter Buffer Size Max	Milliseconds	Maximum size of jitter buffer during session. This metric is contained in the audio payload of the QoE. Stream types other than audio won't report a value for this measurement.
Avg Jitter Buffer Size Min	Milliseconds	Minimum size of jitter buffer during session. This metric is contained in the audio payload of the QoE. Stream types other than audio won't report a value for this measurement.
Avg Relative OneWay	Milliseconds	Average computed relative one way delay of the peer.
Avg Relative OneWay Max	Milliseconds	Average of the maximum relative one-way delay of the peer.
Avg Relative OneWay Gap Occurrences	Milliseconds	Average number of instances of gaps in the relative one way delay of the peer.
Avg Relative OneWay Gap Density	Milliseconds	Average density of gaps in the relative one way delay of the peer.
Avg Relative OneWay Gap Duration	Number (Milliseconds)	Average duration of gaps in the relative one way delay of the peer.
Avg Audio Post FECPLR	Ratio	Average of packet loss rate after FEC is applied for aggregated across all audio streams and codecs for streams.
Avg Video Post FECPLR	Ratio	Average of packet loss rate after FEC is applied for aggregated across all video streams and codecs for streams.
Avg Video Local Frame Loss Percentage	Percentage	Average percentage of video frames lost as displayed to the user for streams. This includes frames recovered from network losses.
Avg Video Received Frame Rate Average	Frames per second	Average of average frames per second received for all video streams computed over the duration of the session for streams.
Avg Video Low Frame Rate Call Percent	Percentage	Average of percentage of time of the call where frame rate is less than 7.5 frames per second for streams.
Avg Video Packet Loss Rate	Ratio	Average of average fraction of packets lost, as specified in RFC3550, computed over the duration of the session for streams.
Avg Video Frame Rate	Frames per second	Average frames per second received for a video stream, computed over the duration of the session. Values grouped by range.
Avg Video Dynamic Capability Percent	Milliseconds	Average of percentage of time that the client is running < 70% expected video processing capability for this type of CPU for streams.
Avg AppSharing Spoiled Tile Percent Total	Milliseconds	Average of percentage of tiles which are discarded instead of being sent to a remote peer (for example, from the MCU to a viewer) for streams. Discarded tiles might be caused by bandwidth restrictions between client and server.
Avg AppSharing Relative OneWay	Seconds	Average of average relative one-way delay between the endpoints in seconds for application sharing streams.
Avg AppSharing RDP Tile Processing Latency	Milliseconds	Average of average latency in milliseconds processing tiles on the RDP Stack at the conferencing server for streams.
Avg First Device Capture Not Functioning Event Ratio	Ratio	Average of the fraction of the call that the first endpoint detects the capture device isn't working properly.
Avg Second Device Capture Not Functioning Event Ratio	Ratio	Average of the fraction of the call that the second endpoint detects the capture device isn't working properly.
Avg First Device Render Not Functioning Event Ratio	Ratio	Average of the fraction of the call that the first endpoint detects the render device isn't working properly.
Avg Second Device Render Not Functioning Event Ratio	Ratio	Average of the fraction of the call that the second endpoint detects the render device isn't working properly.
Avg First Mic Glitch Rate	Number of glitches	Average First Mic Glitch Rate (glitches per 5 minutes for the endpoint microphone) for the stream.
Avg Second Mic Glitch Rate	Number of glitches	Average Second Mic Glitch Rate (glitches per 5 minutes for the endpoint microphone) for the stream.
Avg First Speaker Glitch Rate	Number of glitches	Average First Speaker Glitch Rate (glitches per 5 minutes for the endpoint loudspeaker) for the stream.
Avg Second Speaker Glitch Rate	Number of glitches	Average Second Speaker Glitch Rate (glitches per 5 minutes for the endpoint loudspeaker) for the stream.
Avg First Send Mute Percent	Percentage	Average of the percentage of the audio stream that's muted from the first endpoint.
Avg Second Send Mute Percent	Percentage	Average of the percentage of the audio stream that's muted from the second endpoint.
Avg First System CPU Resource Usage Average	Percentage	The average of the system's average overall CPU usage measured for the first endpoint.
Avg Second System CPU Resource Usage Average	Percentage	The average of the system's average overall CPU usage measured for the second endpoint.
Avg First Process Memory Resource Usage Average	Percentage	The average of the average memory usage by the Teams process measured for the first endpoint.
Avg Second Process Memory Resource Usage Average	Percentage	The average of the average memory usage by the Teams process measured for the second endpoint.
Avg First System CPU Resource Usage Max	Percentage	The average of the maximum values of the system's overall CPU usage measured for the first endpoint.
Avg Second System CPU Resource Usage Max	Percentage	The average of the maximum values of the system's overall CPU usage measured for the second endpoint.
Avg First Process Memory Resource Usage Max	Percentage	The average of the maximum value of the memory usage by the Teams process measured for the first endpoint.
Avg Second Process Memory Resource Usage Max	Percentage	The average of the maximum value of the memory usage by the Teams process measured for the second endpoint.
Avg First System Memory Resource Usage Average	Percentage	The average of the system's average overall memory usage measured for the first endpoint.
Avg Second System Memory Resource Usage Average	Percentage	The average of the system's average overall memory usage measured for the second endpoint.
Avg First System Memory Resource Usage Max	Percentage	The average of maximum values of the system's overall memory usage measured for the first endpoint.
Avg Second System Memory Resource Usage Max	Percentage	The average of maximum values of the system's overall memory usage measured for the second endpoint.
Avg First Process CPU Resource Usage Average	Percentage	The average of the average CPU usage by the Teams process measured for the first endpoint.
Avg Second Process CPU Resource Usage Average	Percentage	The average of the average CPU usage by the Teams process measured for the second endpoint.
Avg First Process CPU Resource Usage Max	Percentage	The average of the maximum values of the CPU usage by the Teams process measured for the first endpoint.
Avg Second Process CPU Resource Usage Max	Percentage	The average of the maximum values of the CPU usage by the Teams process measured for the second endpoint.
First User Count	Number	Number of unique or distinct first endpoint users. Only available for the past 28 days of data. There's an up to 0.2% error for this measure. See note below for details.
Second User Count	Number	Number of unique or distinct second endpoint users. Only available for the past 28 days of data. There's an up to 0.2% error for this measure. See note below for details.
Avg First Device Glitches Event Ratio	Percentage	Average fraction of the calls that the first endpoint detected glitches or gaps in the media played or captured that caused poor quality of the media being sent or received.
Avg Second Device Glitches Event Ratio	Percentage	Average fraction of the call that the second endpoint detected glitches or gaps in the media played or captured that caused poor quality of the media being sent or received.
First Device Glitches Event Count	Number	Number of streams where the first endpoint detected significant glitches or gaps in the media played or captured that caused poor quality of the media being sent or received.
Second Device Glitches Event Count	Number	Number of streams where the second endpoint detected significant glitches or gaps in the media played or captured that caused poor quality of the media being sent or received.
PSTN Total Attempts Count	Number of calls	Total attempted calls, including successful calls and failed calls in the selected time range. There's an up to 0.2% error for this measure. See note below for details.
PSTN Total Connected Count	Number of calls	Total successfully connected calls in the selected time range. There's an up to 0.2% error for this measure. See note below for details.
PSTN Inbound Attempts Count	Number of calls	Total inbound attempted calls, including successful calls and failed calls in the select time range. There's an up to 0.2% error for this measure. See note below for details.
PSTN Inbound Connected Count	Number of calls	Total inbound successfully connected calls in the selected time range. There's an up to 0.2% error for this measure. See note below for details.
PSTN Outbound Attempts Count	Number of calls	Total outbound attempted calls, including successful calls and failed calls in the selected time range. There's an up to 0.2% error for this measure. See note below for details.
PSTN Outbound Connected Count	Number of Calls	Total outbound successfully connected calls in the selected time range. There's an up to 0.2% error for this measure. See note below for details.
PSTN Total Minutes	Minutes	Total minute usage in the selected time range.
PSTN Inbound Total Minutes	Minutes	Total inbound minute usage in the selected time range.
PSTN Outbound Total Minutes	Minutes	Total outbound minute usage in the selected time range.
PSTN Active User Count	Number of users	The number of users who made at least one connected call during that day.
PSTN Average Call Duration	Minutes	The average duration of all connected calls in the selected time range. Normally, a 1:1 PSTN call is four to five minutes. However, this average can differ for each company.
PSTN Total Inbound Concurrent Call Count	Number of calls	Maximum number of simultaneous active inbound calls in a minute.
PSTN Total Outbound Concurrent Call Count	Number of calls	Maximum number of simultaneous active outbound calls in a minute.
P50 Latency	Milliseconds	50% of the requests should be faster than given latency.
P50 Jitter	Milliseconds	50% of the requests should be faster than given Jitter.
P50 Packet Loss Rate	Percentage	50% of the requests should have lower than the given Packet Loss Rate.
PSTN Outgoing Post Dial Delay	Milliseconds	The delay that occurs on outgoing calls measured from the time a number has been dialed until the caller or called party hears ringing.
PSTN Incoming Post Dial Delay	Milliseconds	The time or delay that occurs on incoming calls measured from the time a number has been dialed until the caller or called party hears ringing.
PSTN Calls Affected By NER	Number of calls	Number of PSTN calls considered unsuccessful according to the Network Effectiveness Ratio (NER).
PSTN NER Good Percentage	Percentage	The NER measures the ability of a network to deliver calls by measuring the number of calls sent versus the number of calls delivered to a recipient. NER = (Answered calls + User Busy + Ring no Answer + Terminal Reject Seizures) / Total Attempt Calls x 100. There's an up to 0.2% error for this measure. See note below for details.
Avg Auto Attendant Chain Duration Seconds	Integer	The average duration that users spend in the Auto Attendant, measured in seconds.
Avg Call Queue Duration Seconds	Integer	The average duration that users are waiting for a Call Queue to be answered by an agent, measured in seconds.
Total Teams Events Stream Count	Integer	The total number of Teams Events streams.
Teams Events ECDN Error Stream Count	Integer	The total number of Teams Events streams that failed to establish due to eCDN errors.
Teams Events Setup Failure Stream Count	Integer	The number or Teams Events streams that failed to establish during media setup.
Teams Events Setup Succeeded Stream Count	Integer	The number or Teams Events streams that successfully established.
Teams Events Stream Setup Failure Percentage	Percentage	The percentage of Teams Events steams that failed to establish during media setup.
Detected Inbound Network Problem True Count	Integer	Number of instances that there's high confidence that a First-to-Second media stream might be impacted due to the inbound network.
Detected Inbound Network Problem False Count	Integer	Number of instances that there isn't high confidence that a First-to-Second media stream might be impacted due to the inbound network.
Detected Inbound Network Problem Null Count	Integer	Number of instances that the Detected Inbound Network Problem model returned a null value. See Detected Inbound Network Problem dimension for explanation.
Detected Inbound Network Problem Rate	Percentage	Percentage of streams for which there's high confidence that a First-to-Second media stream might be impacted due to the inbound network.
Avg First Healed Data Ratio Value	Percentage (Decimal)	Percentage of the audio stream in which the audio healer on the first endpoint is invoked, averaged across the number of streams in a given row. High HDR indicates that the client expected audio but Teams didn't have any content to play back. High healer usage is experienced by end-users as choppy audio. This measurement isn't currently calculated for WebRTC-based clients.
Avg Second Healed Data Ratio Value	Percentage (Decimal)	Percentage of the audio stream in which the audio healer on the second endpoint is invoked, averaged across the number of streams in a given row. High HDR indicates that the client expected audio but Teams didn't have any content to play back. High healer usage is experienced by end-users as choppy audio. This measurement isn't currently reported by WebRTC-based clients.
Avg First Received Audio Seconds	Seconds (Decimal)	Amount of active audio received by the first endpoint in seconds, excluding silence. This measurement isn't currently reported by WebRTC based clients.
Avg Second Received Audio Seconds	Seconds (Decimal)	Amount of active audio received by the second endpoint in seconds, excluding silence. This measurement isn't currently reported by WebRTC based clients.
Avg First Roaming Count	Integer	Average of instances where the first endpoint performed a lightweight reconnect mid-call where signaling wasn't involved. For example, when an endpoint switches wireless access points on the same network.
Avg Second Roaming Count	Integer	Average of instances where the second endpoint performed a lightweight reconnect mid-call where signaling wasn't involved. For example, when an endpoint switches wireless access points on the same network.
Avg First Recv Avg Freeze Duration	Seconds	Average of the average duration in seconds of received video freeze events on the first endpoint.
Avg Second Recv Avg Freeze Duration	Seconds	Average of the average duration in seconds of received video freeze events on the second endpoint.
Avg First Recv AV Sync Distance Avg	Milliseconds	The average of the average difference between audio and video modality (video or VBSS) network delays in milliseconds for the first endpoint. A positive value would mean that audio arrived later than the video.
Avg Second Recv AV Sync Distance Avg	Milliseconds	The average of the average difference between audio and video modality (video or VBSS) network delays in milliseconds for the second endpoint. A positive value would mean that audio arrived later than the video.
Avg First Recv AV Sync Distance Max	Milliseconds	The average of the maximum difference value of how much video or VBSS is ahead of the audio for the first endpoint in milliseconds.
Avg Second Recv AV Sync Distance Max	Milliseconds	The average of the maximum difference value of how much video or VBSS is ahead of the audio for the second endpoint in milliseconds.
Avg First Recv AV Sync Distance Min	Milliseconds	The average of the minimum difference value of how much video or VBSS is ahead of the audio for the first endpoint in milliseconds.
Avg Second Recv AV Sync Distance Min	Milliseconds	The average of the minimum difference value of how much video or VBSS is ahead of the audio for the second endpoint in milliseconds.
Avg First Recv AV Sync Distance Std Dev	Milliseconds	The average of the standard deviation of the difference in audio/video sync delay for the first endpoint. Higher values are indicative of a larger variation of the offsync and can indicate burstier video transmission.
Avg Second Recv AV Sync Distance Std Dev	Milliseconds	The average of the standard deviation of the difference in audio/video sync delay for the second endpoint. Higher values are indicative of a larger variation of the offsync and can indicate burstier video transmission.
Avg First Input Noise Level	dBFS (Decimal)	The RMS noise level of the audio signal Teams receives from the first capture device as measured in dBFS.
Avg Second Input Noise Level	dBFS (Decimal)	The RMS noise level of the audio signal Teams receives from the second capture device as measured in dBFS.
Avg First Input Speech Level	dBFS (Decimal)	The RMS level of the speech detected in the audio signal Teams receives from the first capture device as measured in dBFS.
Avg Second Input Speech Level	dBFS (Decimal)	The RMS level of the speech detected in the audio signal Teams receives from the second capture device as measured in dBFS.

Notes on measurements

Accuracy limitations

Certain user and call count measurements rely on performing a distinct countif operation on the data set to compute the count. There's currently an up to 0.2% error inherent with the distinct countif operation depending on the number of rows the operation is performed on. For the most accurate volume, use stream count measures, which don't rely on this distinct countif operation. Filtering to reduce the data volume might reduce the error, but might not eliminate the source of the error in distinct call and user counts. More information about this limitation can be found here dcount aggregate function.

Filters

You can use many Dimension and Measurement values as filters. You can use filters in your query to eliminate information in the same way you'd select a Dimension or Measurement to add or include information in the query.

Improve and monitor call quality for Teams

What is CQD?

Set up Call Quality Dashboard (CQD)

Upload tenant and building data

CQD data and reports

Use CQD to manage call and meeting quality

Stream Classification in CQD

Use Power BI to analyze CQD data