Add-CMMulticastServicePoint
Adds a multicast service point.
Syntax
Add-CMMulticastServicePoint
[-ClientTransferRate <NetworkProfile>]
[-EndIPAddress <String>]
[-EndUdpPort <Int32>]
-InputObject <IResultObject>
[-MaximumClientCount <Int32>]
[-MinimumClientCount <Int32>]
[-SessionStartDelayMins <Int32>]
[-StartIPAddress <String>]
[-StartUdpPort <Int32>]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMulticastServicePoint
[-ClientTransferRate <NetworkProfile>]
[-EndIPAddress <String>]
[-EndUdpPort <Int32>]
[-MaximumClientCount <Int32>]
[-MinimumClientCount <Int32>]
[-SessionStartDelayMins <Int32>]
[-SiteCode <String>]
[-SiteSystemServerName] <String>
[-StartIPAddress <String>]
[-StartUdpPort <Int32>]
[-UserName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Add-CMMulticastServicePoint cmdlet enables multicast to simultaneously send data to multiple clients on the distribution point.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1: Add a multicast service point by using the pipeline
PS XYZ:\> Get-CMDistributionPoint -SiteSystemServerName "server01.contoso.com" | Add-CMMulticastServicePoint -UserName "contoso\administrator" -StartIPAddress "224.0.1.0" -EndIPAddress "239.255.255.255" -StartUdpPort 64001 -EndUdpPort 65000 -ClientTransferRate "Profile100Mbps" -MaximumClientCount 100 -SessionStartDelayMins 15 -MinimumClientCount 20This command gets the distribution point object with the site system server name server1.contoso.com and uses the pipeline operator to pass the object to Add-CMMulticastServicePoint. Add-CMMulticastServicePoint enables multicast on the distribution point object using the administrator account, creating an IP address range of 224.0.1.0 to 239.255.255.255, and a UDP port range of 64001 to 65000. The command also sets the minimum and maximum client count, and sets a start delay of 15 minutes.
Example 2: Add a multicast service point
PS XYZ:\>Add-CMMulticastServicePoint -SiteSystemServerName "server02.contoso.com" -UserName "contoso\administrator" -StartIPAddress "224.0.1.0" -EndIPAddress "239.255.255.255" -StartUdpPort 64001 -EndUdpPort 65000 -ClientTransferRate "Profile100Mbps" -MaximumClientCount 100 -SessionStartDelayMins 15 -MinimumClientCount 20This command enables multicast on the distribution point with the site system server name of server1.contoso.com using the administrator account. The command creates an IP address range of 224.0.1.0 to 239.255.255.255, and a UDP port range of 64001 to 65000. The command also sets the minimum and maximum client count, and sets a start delay of 15 minutes.
Parameters
-ClientTransferRate
No longer used. Transfer speed is dynamic.
Specifies the client transfer rate. Valid values are:
- None
- Profile100Mbps
- Profile10Mbps
- Profile1Gbps
- ProfileCustom
| Type: | NetworkProfile |
| Accepted values: | None, ProfileCustom, Profile10Mbps, Profile100Mbps, Profile1Gbps |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndIPAddress
Specifies the ending IP address in the range of IP addresses that Configuration Manager uses to send data to the destination computers.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EndUdpPort
Specifies the ending port in the range of user datagram protocol (UDP) ports that Configuration Manager uses to send data to the destination computers.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specifies a multicast service point object. To obtain a multicast service point object, use the Get-CMMulticastServicePoint cmdlet.
| Type: | IResultObject |
| Aliases: | SiteServer |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-MaximumClientCount
Specifies the maximum number of destination computers that can download the operating system from this distribution point.
| Type: | Int32 |
| Aliases: | MulticastMaximumClientCount |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MinimumClientCount
Specifies the minimum number of requests that must be received before Configuration Manager starts to deploy the operating system.
| Type: | Int32 |
| Aliases: | MinimumSessionSize |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SessionStartDelayMins
Specifies the number of minutes that Configuration Manager waits before it responds to the first deployment request.
| Type: | Int32 |
| Aliases: | SessionStartDelayMinutes |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SiteCode
Specifies the site code for the Configuration Manager site that hosts the site system role.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SiteSystemServerName
Specifies the name of the server that hosts a site system role.
| Type: | String |
| Aliases: | Name, ServerName |
| Position: | 0 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartIPAddress
Specifies the starting IP address in the range of IP addresses that Configuration Manager uses to send data to the destination computers.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartUdpPort
Specifies the starting port in the range of UDP ports that Configuration Manager uses to send data to the destination computers.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserName
Specifies the name of the user that the distribution site system components use to connect to the primary site database. If UserName is not specified, the cmdlet uses the computer account of the distribution point to the primary site database.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object