Set-User
This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
Use the Set-User cmdlet to modify user attributes. You can use this cmdlet to modify all objects that have user accounts (for example, user mailboxes, mail users, and user accounts).
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Set-User
[-Identity] <UserIdParameter>
[-AllowUMCallsFromNonUsers <AllowUMCallsFromNonUsersFlags>]
[-Arbitration]
[-AssistantName <String>]
[-AuthenticationPolicy <String>]
[-BlockCloudCache <Boolean>]
[-CanHaveCloudCache <Boolean>]
[-CertificateSubject <MultiValuedProperty>]
[-City <String>]
[-ClearDataEncryptionPolicy]
[-Company <String>]
[-Confirm]
[-CountryOrRegion <CountryInfo>]
[-CreateDTMFMap <Boolean>]
[-Department <String>]
[-DesiredWorkloads <MailboxWorkloadFlags>]
[-DisplayName <String>]
[-DomainController <Fqdn>]
[-EXOModuleEnabled <Boolean>]
[-Fax <String>]
[-FirstName <String>]
[-Force]
[-GeoCoordinates <GeoCoordinates>]
[-HomePhone <String>]
[-IgnoreDefaultScope]
[-IsShadowMailbox <Boolean>]
[-Initials <String>]
[-LastName <String>]
[-LinkedCredential <PSCredential>]
[-LinkedDomainController <String>]
[-LinkedMasterAccount <UserIdParameter>]
[-MailboxRegion <String>]
[-MailboxRegionSuffix <MailboxRegionSuffixValue>]
[-ManagedOnboardingType <ManagedOnboardingType>]
[-Manager <UserContactIdParameter>]
[-MobilePhone <String>]
[-Name <String>]
[-Notes <String>]
[-Office <String>]
[-OtherFax <MultiValuedProperty>]
[-OtherHomePhone <MultiValuedProperty>]
[-OtherTelephone <MultiValuedProperty>]
[-Pager <String>]
[-PermanentlyClearPreviousMailboxInfo]
[-Phone <String>]
[-PhoneticDisplayName <String>]
[-PostalCode <String>]
[-PostOfficeBox <MultiValuedProperty>]
[-PublicFolder]
[-RemotePowerShellEnabled <Boolean>]
[-RemoveMailboxProvisioningConstraint]
[-ResetPasswordOnNextLogon <Boolean>]
[-SamAccountName <String>]
[-SeniorityIndex <Int32>]
[-SimpleDisplayName <String>]
[-SkipDualWrite]
[-StateOrProvince <String>]
[-StreetAddress <String>]
[-StsRefreshTokensValidFrom <DateTime>]
[-TelephoneAssistant <String>]
[-Title <String>]
[-UMCallingLineIds <MultiValuedProperty>]
[-UMDtmfMap <MultiValuedProperty>]
[-UserPrincipalName <String>]
[-VIP <Boolean>]
[-WebPage <String>]
[-WhatIf]
[-WindowsEmailAddress <SmtpAddress>]
[<CommonParameters>]Description
The Set-User cmdlet contains no mail-related properties for mailboxes or mail users. To modify the mail-related properties for a user, you need to use the corresponding cmdlet based on the object type (for example, Set-Mailbox or Set-MailUser).
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Set-User -Identity Contoso\Jill -DisplayName "Jill Frank"This example sets the display name for user Jill Frank.
Example 2
Set-User -Identity Kweku@fabrikam.com -LinkedMasterAccount $nullThis example unlinks the linked mailbox Kweku@fabrikam.com and converts it to a user mailbox by setting the LinkedMasterAccount parameter to $null.
Performing this procedure on a linked mailbox removes all permissions on the mailbox such as Send As, Full Access, folder and calendar delegation.
Parameters
-AllowUMCallsFromNonUsers
This parameter is available only in on-premises Exchange.
The AllowUMCallsFromNonUsers parameter specifies whether to exclude the user from Unified Messaging directory searches.
| Type: | AllowUMCallsFromNonUsersFlags |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Arbitration
This parameter is available only in on-premises Exchange.
The Arbitration switch is required to modify arbitration mailboxes. You don't need to specify a value with this switch.
Arbitration mailboxes are system mailboxes that are used for storing different types of system data and for managing messaging approval workflow.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-AssistantName
The AssistantName parameter specifies the name of the user's assistant.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-AuthenticationPolicy
The AuthenticationPolicy parameter specifies the authentication policy to apply to the user. You can use any value that uniquely identifies the policy. For example:
- Name
- Distinguished name (DN)
- GUID
To remove the policy assignment for the user, use the value $null.
You create authentication policies with the New-AuthenticationPolicy cmdlet to block or selectively allow Basic authentication or (in Exchange 2019 CU2 or later) other legacy authentication methods.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2019, Exchange Online, Exchange Online Protection |
-BlockCloudCache
This parameter is available only in the cloud-based service.
{{ Fill BlockCloudCache Description }}
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-CanHaveCloudCache
This parameter is available only in the cloud-based service.
{{ Fill CanHaveCloudCache Description }}
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-CertificateSubject
This parameter is available only in on-premises Exchange.
The CertificateSubject parameter specifies the value of the subject field of the user's digital certificate.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-City
The City parameter specifies the user's city.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-ClearDataEncryptionPolicy
This parameter is available only in the cloud-based service.
{{ Fill ClearDataEncryptionPolicy Description }}
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Company
The Company parameter specifies the user's company.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-Confirm
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-CountryOrRegion
The CountryOrRegion parameter specifies the user's country or region. A valid value is a valid ISO 3166-1 two-letter country code (for example, AU for Australia) or the corresponding friendly name for the country (which might be different from the official ISO 3166 Maintenance Agency short name).
A reference for two-letter country codes is available at Country Codes List.
The friendly name is returned in the CountryOrRegion property value by the Get-User cmdlet, but you can use either the friendly name or the two-letter country code in filter operations.
| Type: | CountryInfo |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-CreateDTMFMap
This parameter is available only in on-premises Exchange.
The CreateDTMFMap parameter specifies whether to create a dual-tone multiple-frequency (DTMF) map for the recipient. This allows the recipient to be identified by using a telephone keypad in Unified Messaging (UM) environments. Valid values are:
- $true: A DTMF map is created for the recipient. This is the default value.
- $false: A DTMF map isn't created for the recipient.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Department
The Department parameter specifies the user's department.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-DesiredWorkloads
This parameter is available only in the cloud-based service.
{{ Fill DesiredWorkloads Description }}
| Type: | Microsoft.Exchange.Data.MailboxWorkloadFlags |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-DisplayName
The DisplayName parameter specifies the display name of the user. The display name is visible in the Exchange admin center and in Active Directory. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-DomainController
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-EXOModuleEnabled
This parameter is available only in the cloud-based service.
The EXOModuleEnabled parameter specifies whether the user can connect to Exchange Online PowerShell in Microsoft 365 organizations using the Exchange Online PowerShell V3 module. Valid values are:
- $true: The user can connect to Exchange Online PowerShell.
- $false: The user can't connect to Exchange Online PowerShell.
The default value depends on the management roles that are assigned to the user.
Access to Exchange Online PowerShell is also required for other features (for example, the ability to open the Exchange admin center (EAC)).
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Fax
The Fax parameter specifies the user's fax number.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-FirstName
The FirstName parameter specifies the user's first name.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-Force
This parameter is available only in the cloud-based service.
The Force switch hides warning or confirmation messages. You don't need to specify a value with this switch.
You can use this switch to run tasks programmatically where prompting for administrative input is inappropriate.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-GeoCoordinates
The GeoCoordinates parameter specifies the user's location in latitude, longitude and (optionally) altitude coordinates. A valid value for this parameter uses one of the following formats:
- Latitude and longitude: For example, "47.644125;-122.122411"
- Latitude, longitude, and altitude: For example, "47.644125;-122.122411;161.432"
Note: If period separators don't work for you, use commas instead.
| Type: | GeoCoordinates |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-HomePhone
The HomePhone parameter specifies the user's home telephone number.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-Identity
The Identity parameter specifies the user that you want to modify. You can use any value that uniquely identifies the user. For example:
- Name
- User principal name (UPN)
- Distinguished name (DN)
- Canonical DN
- GUID
- UserPrincipalName
| Type: | UserIdParameter |
| Position: | 1 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-IgnoreDefaultScope
This parameter is available only in on-premises Exchange.
The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.
This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:
- You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
- You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Initials
The Initials parameter specifies the user's middle initials.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-IsShadowMailbox
This parameter is available only in the cloud-based service.
{{ Fill IsShadowMailbox Description }}
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-LastName
The LastName parameter specifies the user's last name.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-LinkedCredential
This parameter is available only in on-premises Exchange.
The LinkedCredential parameter specifies the username and password that's used to access the domain controller specified by the LinkedDomainController parameter.
A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.
You can only use the LinkedCredential parameter with a linked user.
| Type: | PSCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-LinkedDomainController
This parameter is available only in on-premises Exchange.
The LinkedDomainController parameter specifies the domain controller in the forest where the user account resides, if this user is a linked user. The domain controller in the forest where the user account resides is used to get security information for the account specified by the LinkedMasterAccount parameter.
This parameter is required only if you're connecting a linked user.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-LinkedMasterAccount
This parameter is available only in on-premises Exchange.
The LinkedMasterAccount parameter specifies the master account in the forest where the user account resides, if this user is a linked user. The master account is the account to which the user links. The master account grants access to the user. You can use one of the following values:
- GUID
- DN
- Domain\Account
- UPN
- LegacyExchangeDN
- SmtpAddress
- Alias
- $null
If you set this parameter's value to $null, you will unlink the account and convert the linked mailbox into a non-linked user mailbox. The mailbox won't retain the permissions previously set on it such as Send As, full access, folder, and calendar delegation.
This parameter is required only if you're connecting a linked user.
| Type: | UserIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-MailboxRegion
This parameter is available only in the cloud-based service.
{{ Fill MailboxRegion Description }}
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-MailboxRegionSuffix
This parameter is available only in the cloud-based service.
{{ Fill MailboxRegionSuffix Description }}
| Type: | MailboxRegionSuffixValue |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-ManagedOnboardingType
This parameter is available only in the cloud-based service.
{{ Fill ManagedOnboardingType Description }}
| Type: | ManagedOnboardingType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-Manager
The Manager parameter specifies the user's manager.
| Type: | UserContactIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-MobilePhone
The MobilePhone parameter specifies the user's primary mobile phone number.
Note: In Exchange Online, you can't use this parameter. Instead, use the MobilePhone parameter on the Update-MgUser cmdlet in Microsoft Graph PowerShell.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-Name
The Name parameter specifies the unique name of the user. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-Notes
The Notes parameters specifies additional information about the object. If the value contains spaces, enclose the value in quotation marks (").
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-Office
The Office parameter specifies the user's physical office name or number.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-OtherFax
The OtherFax parameter specifies the user's alternative fax number.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-OtherHomePhone
The OtherHomePhone parameter specifies the user's alternative home telephone number.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-OtherTelephone
The OtherTelephone parameter specifies the user's alternative telephone number.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-Pager
The Pager parameter specifies the user's pager number.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-PermanentlyClearPreviousMailboxInfo
This parameter is functional only in the cloud-based service.
The PermanentlyClearPreviousMailboxInfo switch specifies whether to clear the Exchange Online mailbox attributes on a user. You don't need to specify a value with this switch.
Clearing these attributes might be required in mailbox move and re-licensing scenarios between on-premises Exchange and Microsoft 365. For more information, see Permanently Clear Previous Mailbox Info.
Caution: This switch prevents you from reconnecting to the mailbox and prevents you from recovering content from the mailbox.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019, Exchange Online |
-Phone
The Phone parameter specifies the user's office telephone number.
Note: In Exchange Online, you can't use this parameter. Instead, use the BusinessPhones parameter on the Update-MgUser cmdlet in Microsoft Graph PowerShell.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-PhoneticDisplayName
The PhoneticDisplayName parameter specifies an alternate spelling of the user's name that's used for text to speech in Unified Messaging (UM) environments. Typically, you use this parameter when the pronunciation and spelling of the user's name don't match. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-PostalCode
The PostalCode parameter specifies the user's zip code or postal code.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-PostOfficeBox
The PostOfficeBox parameter specifies the user's post office box number.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-PublicFolder
The PublicFolder switch is required to modify public folder mailboxes. You don't need to specify a value with this switch.
Public folder mailboxes are specially designed mailboxes that store the hierarchy and content of public folders.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-RemotePowerShellEnabled
Note: This parameter is being deprecated in cloud-based environments. In cloud-based environments, use the EXOModuleEnabled parameter instead.
The RemotePowerShellEnabled parameter specifies whether the user has access to remote PowerShell. Remote PowerShell access is required to open the Exchange Management Shell or the Exchange admin center (EAC), even if you're trying to open the Exchange Management Shell or the EAC on the local Mailbox server. Valid values are:
- $true: The user has access to remote PowerShell.
- $false: The user doesn't have access to remote PowerShell.
The default value depends on the management roles that are assigned to the user.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-RemoveMailboxProvisioningConstraint
This parameter is available only in the cloud-based service.
This parameter is reserved for internal Microsoft use.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-ResetPasswordOnNextLogon
The ResetPasswordOnNextLogon parameter specifies whether the user must change their password the next time they log on. Valid values are:
- $true: The user is required to change their password the next time they log on.
- $false: The user isn't required to change their password the next time they log on. This is the default value.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-SamAccountName
This parameter is available only in on-premises Exchange.
The SamAccountName parameter (also known as the pre-Windows 2000 user account or group name) specifies an object identifier that's compatible with older versions of Microsoft Windows client and server operating systems. The value can contain letters, numbers, spaces, periods (.), and the following characters: !, #, $, %, ^, &, -, _, {, }, and ~. The last character can't be a period. Unicode characters are allowed, but accented characters may generate collisions (for example, o and รถ match). The maximum length is 20 characters.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-SeniorityIndex
The SeniorityIndex parameter specifies the order in which this user will display in a hierarchical address book. A user with a value of 2 will display higher in an address book than a user with a value of 1.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-SimpleDisplayName
The SimpleDisplayName parameter is used to display an alternative description of the object when only a limited set of characters is permitted. Valid characters are:
- a - z
- A - Z
- 0 - 9
- space
" ' ( ) + , - . / : ?
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-SkipDualWrite
This parameter is available only in on-premises Exchange.
This parameter is reserved for internal Microsoft use.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-StateOrProvince
The StateOrProvince parameter specifies the user's state or province.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-StreetAddress
The StreetAddress parameter specifies the user's physical address.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-StsRefreshTokensValidFrom
This parameter is available only in the cloud-based service.
The StsRefreshTokensValidFrom specifies the date-time that the user's STS refresh tokens are valid from.
Use the short date format that's defined in the Regional Options settings on the computer where you're running the command. For example, if the computer is configured to use the short date format MM/dd/yyyy, enter 09/01/2018 to specify September 1, 2018. You can enter the date only, or you can enter the date and time of day. If you enter the date and time of day, enclose the value in quotation marks ("), for example, "09/01/2018 5:00 PM".
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-TelephoneAssistant
This parameter is available only in on-premises Exchange.
The TelephoneAssistant parameter specifies the telephone number of the user's assistant.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Title
The Title parameter specifies the user's title.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-UMCallingLineIds
This parameter is available only in on-premises Exchange.
The UMCallingLineIds parameter specifies telephone numbers or extensions that can be mapped to a Unified Messaging (UM)-enabled user. You can specify more than one telephone number for each user, separated by a comma. This parameter accepts digits less than 128 characters in length and may include an optional plus sign (+) preceding the numbers. Each UM-enabled user must have a unique UMCallingLineIds parameter value.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-UMDtmfMap
This parameter is available only in on-premises Exchange.
The UMDtmfMap parameter specifies the dual-tone multiple-frequency (DTMF) map values for the recipient. This allows the recipient to be identified by using a telephone keypad in Unified Messaging (UM) environments. Typically, these DTMF values are automatically created and updated, but you can use this parameter to make changes manually. This parameter uses the following syntax:
emailAddress:<integers>lastNameFirstName:<integers>firstNameLastName:<integers>
To enter values that overwrite all existing entries, use the following syntax: emailAddress:<integers>,lastNameFirstName:<integers>,firstNameLastName:<integers>.
If you use this syntax and you omit any of the DTMF map values, those values are removed from the recipient. For example, if you specify only emailAddress:<integers>, all existing lastNameFirstName and firstNameLastName values are removed.
To add or remove values without affecting other existing entries, use the following syntax: @{Add="emailAddress:<integers>","lastNameFirstName:<integers>","firstNameLastName:<integers>"; Remove="emailAddress:<integers>","lastNameFirstName:<integers>","firstNameLastName:<integers>"}.
If you use this syntax, you don't need to specify all of the DTMF map values, and you can specify multiple DTMF map values. For example, you can use @{Add="emailAddress:<integers1>","emailAddress:<integers2>} to add two new values for emailAddress without affecting the existing lastNameFirstName and firstNameLastName values.
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-UserPrincipalName
This parameter is available only in on-premises Exchange.
The UserPrincipalName parameter specifies the logon name for the user account. The UPN uses an email address format: username@domain. Typically, the domain value is the domain where the user account resides.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-VIP
This parameter is available only in the cloud-based service.
The VIP parameter specifies whether the user is a priority account. Valid values are:
- $true: The user is a priority account.
- $false: The user is not a priority account.
For more information about priority accounts, see Manage and monitor priority accounts.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online, Exchange Online Protection |
-WebPage
The WebPage parameter specifies the user's Web page.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-WhatIf
The WhatIf switch doesn't work on this cmdlet.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
-WindowsEmailAddress
The WindowsEmailAddress parameter specifies the Windows email address for this recipient. This is a common Active Directory attribute that's present in all environments, including environments without Exchange. Using the WindowsEmailAddress parameter on a recipient has one of the following results:
- In environments where the recipient is subject to email address policies (the EmailAddressPolicyEnabled property is set to the value True for the recipient), the WindowsEmailAddress parameter has no effect on the WindowsEmailAddress property or the primary email address value.
- In environments where the recipient isn't subject to email address policies (the EmailAddressPolicyEnabled property is set to the value False for the recipient), the WindowsEmailAddress parameter updates the WindowsEmailAddress property and the primary email address to the same value.
The WindowsEmailAddress property is visible for the recipient in Active Directory Users and Computers in the E-mail attribute. The attribute common name is E-mail-Addresses, and the Ldap-Display-Name is mail. If you modify this attribute in Active Directory, the recipient's primary email address is not updated to the same value.
| Type: | SmtpAddress |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.