Bewerken

Delen via


Maintaining a Network Interface Stack

NDIS provides services to maintain the interface stack table (ifStackTable in RFC 2863). NDIS maintains the stack table for NDIS miniport adapters, NDIS 5.x filter intermediate drivers, and NDIS filter modules. NDIS also provides services to enable NDIS drivers to add and delete entries in this table. For MUX intermediate drivers, NDIS does not have access to the relationship between the virtual miniport interface and the protocol lower interface. Therefore, NDIS 6.0 MUX intermediate drivers must specify these internal interface relationships.

To define a stack relationship between two interfaces, any NDIS driver can pass HigherLayerIfIndex and LowerLayerIfIndex parameters to the NdisIfAddIfStackEntry function. These parameters specify one network interface that should be higher in the network interface stack and one network interface that should be lower in the stack.

A driver that has stack order information about an interface that is related to another interface (for example, internal bindings in a MUX intermediate driver that are not visible to NDIS) calls NdisIfAddIfStackEntry to populate the interface stack table. This function returns NDIS_STATUS_SUCCESS if the stack entry was successfully made. Typically, the component that owns or is the interface provider for the higher layer interface (which HigherLayerIfIndex identifies) calls NdisIfAddIfStackEntry.

To remove a stack table entry, a driver passes HigherLayerIfIndex and LowerLayerIfIndex parameters to the NdisIfDeleteIfStackEntry function.

For an example of maintaining the interface stack, see the MUX 6.0 sample driver.