Udostępnij za pośrednictwem

Tell us about your Rollup 2 (and KB908250) problems

  • Artykuł

Are you an MCE user experiencing problems since you installed Rollup 2 and/or KB908250?  I want to hear about them.  Comments will be moderated to reduce redundancy, but I'd like to hear about any troubles you might be having.

Here are the ground rules:

  • Reports must be directly related to Rollup 2 or KB908250 (the "Rollup to the Rollup").  This means that the problem must have started occurring right after you installed (or uninstalled) one of those 2 packages.
  • You must be willing to share information about your system, which could include running a diagnostic tool that gathers information on your system.  The information not be shared with anyone else, and will only be used to diagnose and/or fix the issue.  I may share information within my team, but only those parts immediately pertinent to the investigation, and only if needed.  I will inform you if that is required.
  • All comments will be edited by me before being published to the blog.  Any personally-identifying information will be removed from your comment, including names, phone numbers, email addresses, etc.  Also, feedback without a way to get in contact with you via email (mandatory) or phone (optional) will not be published.  I won't ignore any feedback, but its usefulness will be limited if there's no way to get more info about a problem.
  • You will probably not hear back from me; there is no guarantee that I will be able to respond to everyone.
  • You might hear from me, so by giving me contact information you give me permission to do so.
  • This is not intended to provide specific solutions for your computer (although if there is one, I will certainly share it!).  If you are having a problem, I urge you to contact your computer manufacturer or system builder to obtain support.

If you want to maximize the usefulness of your report, include the following information:

  1. A concise, one-line description of the issue.
  2. Repro steps (what it takes for me to get the problem to happen to my box).  If it's a problem with Live TV, make sure you include the steps you normally take to get there (i.e. pressing Live TV on the remote control vs. going through the Start Menu, My TV and Live TV).
  3. Expected results.  What did you expect to happen?
  4. Observed results.  What actually happened?
  5. Hardware configuration, even better if you include a link to an MCDiag dump.  You can get MCDiag as part of the Windows XP Media Center Diagnostics Kit 3.0.  MCDiag will collect all the information from the default settings, so there's no need to check any of the boxes (when you run it you'll see what I mean).
  6. Other media-related software installed on the box, for example non-Microsoft codecs (like DIVX, mmswitch), DVD burning applications, etc.

Thanks, and I look forward to your feedback!

Comments

  • Anonymous
    November 01, 2005
    Peter I have an MCdiag dump of my system that exhibits that dual-tuner post-RU2 PTS problem. If you need it , but I have nowhere to host it. Which brings me to my next point, it might be a good idea to start a more formal method of bug feedback. Somewhere , where a log file can be attached and people are brought through the process with a web based wizzard with all the pertinent fields being mandatory , etc. also on the aforementioned dual tuner PTS bug I have now tried x2 TUL Theater 550 pro tuner cards , they also show the problem but I'm pretty sure they don't use the Conexant chipset. rgds, Steve.
  • Anonymous
    November 02, 2005
    <P>Content not allowed to play through Media Center Extender on HBO, Cnemax and other rights protected channels From MCE Extender, tune in to a content protected channel, or open a show already recorded that had the broadcast flag, like HBO. </P>
    <P>The content stops playing after a minute when it reaches the part of the program that is protected or immediately if it is live TV with content protection being broadcasted. I get get the "content can not be played" blue screen. </P>
    <P>In the extender, before Rollup two I didn't have any issues with content not being able to play from those channels and it should work the same way it works when I don't use the extender I will get an MCDiag for you if you want it.</P>
    <P>I am not running anything extra, but the vanilla installation and the My Movies plug in (not that I had to reformat my PC after it being crashed the first time I installed rollup 2) </P>
    <P>Computer: <BR>nVidia CODEC <BR>latest MCE nvidia drivers <BR>eVGA nvidia 5200 graphic card <BR>nvtv tuner card <BR>P4 @ 2.8 Ghz (I assembled the PC) <BR>1 GB of RAM <BR>PCI Modem <BR>SoundBlaster Audigy 2 card </P>