Instrukcje: ładowanie zestawów do kontekstu tylko odbicia
Kontekst ładowania tylko odbicia umożliwia badanie zestawów skompilowanych dla innych platform lub innych wersji platformy .NET. Kod załadowany do tego kontekstu można zbadać tylko; nie można go wykonać. Oznacza to, że nie można utworzyć obiektów, ponieważ konstruktorów nie można wykonać. Ponieważ nie można wykonać kodu, zależności nie są ładowane automatycznie. Jeśli musisz je zbadać, musisz załadować je samodzielnie.
Aby załadować zestaw do kontekstu ładowania tylko odbicia
ReflectionOnlyLoad(String) Użyj przeciążenia metody, aby załadować zestaw pod nazwą wyświetlaną lub ReflectionOnlyLoadFrom metodę, aby załadować zestaw pod daną ścieżką. Jeśli zestaw jest obrazem binarnym, użyj ReflectionOnlyLoad(Byte[]) przeciążenia metody.
Uwaga
Nie można użyć kontekstu tylko odbicia, aby załadować wersję mscorlib.dll z wersji programu .NET Framework innej niż wersja w kontekście wykonywania.
Jeśli zestaw ma zależności, ReflectionOnlyLoad metoda nie ładuje ich. Jeśli musisz je zbadać, musisz załadować je samodzielnie.
Ustal, czy zestaw jest ładowany do kontekstu tylko odbicia przy użyciu właściwości zestawu ReflectionOnly .
Jeśli atrybuty zostały zastosowane do zestawu lub typów w zestawie, sprawdź te atrybuty przy użyciu CustomAttributeData klasy, aby upewnić się, że nie podjęto próby wykonania kodu w kontekście tylko odbicia. Użyj odpowiedniego CustomAttributeData.GetCustomAttributes przeciążenia metody, aby uzyskać CustomAttributeData obiekty reprezentujące atrybuty zastosowane do zestawu, elementu członkowskiego, modułu lub parametru.
Uwaga
Atrybuty zastosowane do zestawu lub jego zawartości mogą być zdefiniowane w zestawie lub mogą być zdefiniowane w innym zestawie załadowanym do kontekstu tylko odbicia. Nie ma możliwości wcześniejszego określenia, gdzie są zdefiniowane atrybuty.
Przykład
Poniższy przykład kodu pokazuje, jak zbadać atrybuty zastosowane do zestawu załadowanego do kontekstu tylko odbicia.
Przykład kodu definiuje atrybut niestandardowy z dwoma konstruktorami i jedną właściwością. Atrybut jest stosowany do zestawu, do typu zadeklarowanego w zestawie, do metody typu i do parametru metody metody . Po wykonaniu zestaw ładuje się do kontekstu tylko odbicia i wyświetla informacje o atrybutach niestandardowych, które zostały do niego zastosowane, oraz do typów i elementów członkowskich, które zawiera.
Uwaga
Aby uprościć przykładowy kod, zestaw ładuje się i sprawdza sam. Zwykle nie można oczekiwać, że ten sam zestaw zostanie załadowany zarówno do kontekstu wykonywania, jak i kontekstu tylko odbicia.
using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;
// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
FirstKind, SecondKind, ThirdKind, FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
// Data for properties.
ExampleKind kindValue;
String^ noteValue;
array<String^>^ arrayStrings;
array<int>^ arrayNumbers;
// Constructors.
void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
{
kindValue = initKind;
arrayStrings = initStrings;
}
public:
ExampleAttribute()
{
ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
}
ExampleAttribute( ExampleKind initKind )
{
ExampleAttributeInitialize( initKind, nullptr );
}
ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
{
ExampleAttributeInitialize( initKind, initStrings );
}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
property ExampleKind Kind
{
ExampleKind get()
{
return kindValue;
}
}
property array<String^>^ Strings
{
array<String^>^ get()
{
return arrayStrings;
}
}
property String^ Note
{
String^ get()
{
return noteValue;
}
void set( String^ value )
{
noteValue = value;
}
}
property array<int>^ Numbers
{
array<int>^ get()
{
return arrayNumbers;
}
void set( array<int>^ value )
{
arrayNumbers = value;
}
}
};
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];
// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind,
gcnew array<String^> { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = gcnew array<int> { 53, 57, 59 })]
public ref class Test
{
public:
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
void TestMethod( [Example] Object^ arg ){}
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
static void Main()
{
Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
Type^ t = assembly->GetType( "Test" );
MethodInfo^ m = t->GetMethod( "TestMethod" );
array<ParameterInfo^>^p = m->GetParameters();
Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
}
private:
static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
{
if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
{
Console::WriteLine(" Array of '{0}':", cata->ArgumentType);
for each (CustomAttributeTypedArgument^ cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
{
Console::WriteLine(" Type: '{0}' Value: '{1}'",
cataElement->ArgumentType, cataElement->Value);
}
}
else
{
Console::WriteLine( " Type: '{0}' Value: '{1}'",
cata->ArgumentType, cata->Value );
}
}
static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
{
for each ( CustomAttributeData^ cad in attributes )
{
Console::WriteLine( " {0}", cad );
Console::WriteLine( " Constructor: '{0}'", cad->Constructor );
Console::WriteLine( " Constructor arguments:" );
for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console::WriteLine( " Named arguments:" );
for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
{
Console::WriteLine( " MemberInfo: '{0}'", cana.MemberInfo );
ShowValueOrArray(cana.TypedValue);
}
}
}
};
int main()
{
Test::Main();
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly: Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() {"String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3"}, _
Note:="This is a note on the class.", _
Numbers:=New Integer() {53, 57, 59})> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
Zobacz też
Współpracuj z nami w serwisie GitHub
Źródło tej zawartości można znaleźć w witrynie GitHub, gdzie można również tworzyć i przeglądać problemy i żądania ściągnięcia. Więcej informacji znajdziesz w naszym przewodniku dla współtwórców.
Opinia
Dostępne już wkrótce: W 2024 r. będziemy stopniowo wycofywać zgłoszenia z serwisu GitHub jako mechanizm przesyłania opinii na temat zawartości i zastępować go nowym systemem opinii. Aby uzyskać więcej informacji, sprawdź: https://aka.ms/ContentUserFeedback.
Prześlij i wyświetl opinię dla