2.2.2.54.3 Status (RemoteWipe)
The Status element is a required child of the RemoteWipe or AccountOnlyRemoteWipe element in command requests. The value of this element is an unsignedByte ([MS-ASDTYPE] section 2.8). The value indicates the success or failure of a remote wipe operation on the client. The following table lists valid values for the Status element when it is the child of the RemoteWipe or AccountOnlyRemoteWipe element.
|
Value |
Meaning |
|---|---|
|
1 |
The client remote wipe operation was successful. |
|
2 |
The remote wipe operation failed. |
Protocol Versions
The following table specifies the protocol versions that support this element. The client indicates the protocol version being used by setting either the MS-ASProtocolVersion header, as specified in [MS-ASHTTP] section 2.2.1.1.2.6, or the Protocol version field, as specified in [MS-ASHTTP] section 2.2.1.1.1.1, in the request.
|
Protocol version |
Element support |
|---|---|
|
2.5 |
Yes |
|
12.0 |
Yes |
|
12.1 |
Yes |
|
14.0 |
Yes |
|
14.1 |
Yes |
|
16.0 |
Yes |
|
16.1 |
Yes |