Set-CMTaskSequenceGroup

SYNOPSIS

Ustawia Menedżer konfiguracji sekwencji zadań.

SYNTAX

ByValue (wartość domyślna)

Set-CMTaskSequenceGroup [-AddStep <IResultObject[]>] [-CleanStep] [-InsertStepStartIndex <Int32>]
 [-AddCondition <IResultObject[]>] [-ClearCondition] [-Description <String>] -InputObject <IResultObject>
 [-IsContinueOnError <Boolean>] [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>]
 [-RemoveConditionFile] [-RemoveConditionFolder] [-RemoveConditionIfStatement]
 [-RemoveConditionOperatingSystem] [-RemoveConditionQueryWmi] [-RemoveConditionRegistry]
 [-RemoveConditionSoftware] [-RemoveConditionVariable] [-StepName <String>] [-StepOrder <ReorderType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ById

Set-CMTaskSequenceGroup [-AddStep <IResultObject[]>] [-CleanStep] [-InsertStepStartIndex <Int32>]
 [-AddCondition <IResultObject[]>] [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>]
 [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile]
 [-RemoveConditionFolder] [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem]
 [-RemoveConditionQueryWmi] [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable]
 [-StepName <String>] [-StepOrder <ReorderType>] -TaskSequenceId <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

WedługNazwa

Set-CMTaskSequenceGroup [-AddStep <IResultObject[]>] [-CleanStep] [-InsertStepStartIndex <Int32>]
 [-AddCondition <IResultObject[]>] [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>]
 [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile]
 [-RemoveConditionFolder] [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem]
 [-RemoveConditionQueryWmi] [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable]
 [-StepName <String>] [-StepOrder <ReorderType>] -TaskSequenceName <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionIfStatement

Set-CMTaskSequenceGroup [-Condition <IResultObject[]>] [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionIfStatement

Set-CMTaskSequenceGroup [-Condition <IResultObject[]>] [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionIfStatement

Set-CMTaskSequenceGroup [-Condition <IResultObject[]>] -InputObject <IResultObject> [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionVariable

Set-CMTaskSequenceGroup [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 [-OperatorType <VariableOperatorType>] [-SetConditionVariable] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionVariable

Set-CMTaskSequenceGroup [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 [-OperatorType <VariableOperatorType>] [-SetConditionVariable] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionVariable

Set-CMTaskSequenceGroup [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 -InputObject <IResultObject> [-OperatorType <VariableOperatorType>] [-SetConditionVariable]
 [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByIdSetConditionFile

Set-CMTaskSequenceGroup [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile] [-StepName <String>]
 -TaskSequenceId <String> [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFile

Set-CMTaskSequenceGroup [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile] [-StepName <String>]
 -TaskSequenceName <String> [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFile

Set-CMTaskSequenceGroup [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] -InputObject <IResultObject> [-SetConditionFile]
 [-StepName <String>] [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionFolder

Set-CMTaskSequenceGroup [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFolder

Set-CMTaskSequenceGroup [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFolder

Set-CMTaskSequenceGroup [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] -InputObject <IResultObject> [-SetConditionFolder] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionQueryWmi

Set-CMTaskSequenceGroup -InputObject <IResultObject> [-Namespace <String[]>] [-Query <String>]
 [-SetConditionQueryWmi] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionOperatingSystem

Set-CMTaskSequenceGroup -InputObject <IResultObject> [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionRegistry

Set-CMTaskSequenceGroup -InputObject <IResultObject> [-RegistryKey <String>]
 [-RegistryOperator <VariableOperatorType>] [-RegistryValueData <String>] [-RegistryValueName <String>]
 [-RootKey <RegistryRootKeyType>] [-SetConditionRegistry] [-StepName <String>] [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionSoftware

Set-CMTaskSequenceGroup -InputObject <IResultObject> [-IsAnyVersion <Boolean>] [-MsiFilePath <String>]
 [-SetConditionSoftware] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionSoftware

Set-CMTaskSequenceGroup [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware]
 [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByNameSetConditionSoftware

Set-CMTaskSequenceGroup [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware]
 [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionQueryWmi

Set-CMTaskSequenceGroup [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi] [-StepName <String>]
 -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByNameSetConditionQueryWmi

Set-CMTaskSequenceGroup [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi] [-StepName <String>]
 -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByIdSetConditionRegistry

Set-CMTaskSequenceGroup [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>]
 [-RegistryValueData <String>] [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>]
 [-SetConditionRegistry] [-StepName <String>] -TaskSequenceId <String> [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionRegistry

Set-CMTaskSequenceGroup [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>]
 [-RegistryValueData <String>] [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>]
 [-SetConditionRegistry] [-StepName <String>] -TaskSequenceName <String> [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionOperatingSystem

Set-CMTaskSequenceGroup [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] -TaskSequenceId <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionOperatingSystem

Set-CMTaskSequenceGroup [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] -TaskSequenceName <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

DESCRIPTION

Polecenie cmdlet Set-CMTaskSequenceGroup ustawia właściwości, opcje, określone warunki i kroki grup sekwencji zadań w sekwencji zadań. Polecenie cmdlet obsługuje potok z obiektu sekwencji zadań i może być filtrowane według nazwy grupy.

Uwaga

Uruchom Menedżer konfiguracji cmdlet z Menedżer konfiguracji lokacji, na przykład PS XYZ:\> . Aby uzyskać więcej informacji, zobacz wprowadzenie.

EXAMPLES

Przykład 1

PS XYZ:\>$ReferencedTaskSequence | Set-CMTaskSequenceGroup -StepName $gpName -NewStepName $gpName2 -Description $gpNewDescription -IsContinueOnError $false -IsEnabled $false -ClearStep -AddStep $st1 -ClearCondition -AddCondition $cd1

Przykład 2

$ReferencedTaskSequence | Set-CMTaskSequenceGroup -StepName $gpName2 -SetConditionIfStatement -StatementType None -Condition $cd1

Przykład 3

$ReferencedTaskSequence | Set-CMTaskSequenceGroup -StepName $gpName2 -AddStep $st1 -InsertStepStartIndex $index

Przykład 4

$ReferencedTaskSequence | Set-CMTaskSequenceGroup -StepName $gpName2 -StepOrder MoveToIndex -MoveToIndex $index

PARAMETERS

-AddCondition

Określa obiekty warunku do dodania.

Type: IResultObject[]
Parameter Sets: ByValue, ById, ByName
Aliases: AddConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-AddStep

Określa kroki do dodania.

Type: IResultObject[]
Parameter Sets: ByValue, ById, ByName
Aliases: AddSteps

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-CleanStep

Wyczyść krok po wartości/identyfikatorze/nazwie.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases: ClearSteps, ClearStep, CleanSteps

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ClearCondition

Wyczyść warunek według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases: ClearConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Warunek

Określa warunki.

Type: IResultObject[]
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: SubCondition, SubConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableName

Określa nazwę zmiennej warunku.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Variable

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableValue

Określa wartość zmiennej warunku.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Value

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Monituje o potwierdzenie przed uruchomieniem polecenia cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Description (Opis)

Określa opis.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DisableWildcardHandling

Ten parametr traktuje symbole wieloznaczne jako wartości literału znaków. Nie można połączyć go z forceWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileDateTimeOperator

Określa operator daty i czasu pliku.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FilePath

Określa ścieżkę pliku.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileTimestamp

Określa sygnaturę czasową pliku.

Type: DateTime
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileVersion

Określa wersję pliku.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderDateTimeOperator

Określa operator daty i czasu folderu.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderPath

Określa ścieżkę folderu.

Type: String
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderTimestamp

Określa sygnaturę czasową folderu.

Type: DateTime
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ForceWildcardHandling

Ten parametr przetwarza symbole wieloznaczne i może prowadzić do nieoczekiwanego zachowania (nie jest zalecane). Nie można połączyć go z disableWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Określa obiekt sekwencji zadań.

Type: IResultObject
Parameter Sets: ByValue, ByValueSetConditionIfStatement, ByValueSetConditionVariable, ByValueSetConditionFile, ByValueSetConditionFolder, ByValueSetConditionQueryWmi, ByValueSetConditionOperatingSystem, ByValueSetConditionRegistry, ByValueSetConditionSoftware
Aliases: TaskSequence

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

-InsertStepStartIndex

Określa indeks rozpoczęcia kroku wstawiania.

Type: Int32
Parameter Sets: ByValue, ById, ByName
Aliases: InsertStepsStartIndex

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsAnyVersion

Type: Boolean
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsContinueOnError

Wskazuje, czy kontynuować w przypadku wystąpienia błędu.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepContinueOnError

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsEnabled

Wskazuje, czy krok jest włączony.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepEnabled

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MoveToIndex

Określa indeks, aby przejść do.

Type: Int32
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MsiFilePath

Określa ścieżkę pliku MSI.

Type: String
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Przestrzeń nazw

Określa przestrzenie nazw.

Type: String[]
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-NewStepName

Określa nazwę nowego kroku.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-OperatorType

Określa typ operacji.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Query (Zapytanie)

Określa zapytanie.

Type: String
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryKey (Klucz rejestru)

Określa klucz rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryOperator

Określa operator rejestru.

Type: VariableOperatorType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueData

Określa dane wartości rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueName

Określa nazwę wartości rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFile

Usuń plik warunku według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFolder

Usuń folder warunku według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionIfStatement

Usuń instrukcje IF warunku według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionOperatingSystem

Usuń system operacyjny warunku według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionQueryWmi

Usuń zapytanie o warunek WMI według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionRegistry

Usuń rejestr warunków według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionSoftware

Usuń oprogramowanie warunku według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionVariable

Usuń zmienną warunku według wartości/identyfikatora/nazwy.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RootKey

Określ klucz główny.

Type: RegistryRootKeyType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFile

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFolder

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionIfStatement

Type: SwitchParameter
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionOperatingSystem

Type: SwitchParameter
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionQueryWmi

Type: SwitchParameter
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionRegistry

Type: SwitchParameter
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionSoftware

Type: SwitchParameter
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionVariable

Type: SwitchParameter
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StatementType

Type: ConditionStatementType
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: Operator
Accepted values: All, Any, None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepName

Określa nazwę kroku.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepOrder

Określa kolejność kroków.

Type: ReorderType
Parameter Sets: ByValue, ById, ByName
Aliases:
Accepted values: MoveUp, MoveDown, MoveToIndex

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SupportedPlatform

Określa obsługiwane platformy.

Type: IResultObject[]
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases: SupportedPlatforms

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceId

Określa identyfikator sekwencji zadań.

Type: String
Parameter Sets: ById, ByIdSetConditionIfStatement, ByIdSetConditionVariable, ByIdSetConditionFile, ByIdSetConditionFolder, ByIdSetConditionSoftware, ByIdSetConditionQueryWmi, ByIdSetConditionRegistry, ByIdSetConditionOperatingSystem
Aliases: Id, TaskSequencePackageId

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceName

Określa nazwę sekwencji zadań.

Type: String
Parameter Sets: ByName, ByNameSetConditionIfStatement, ByNameSetConditionVariable, ByNameSetConditionFile, ByNameSetConditionFolder, ByNameSetConditionSoftware, ByNameSetConditionQueryWmi, ByNameSetConditionRegistry, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ValueType

Określa typ wartości.

Type: RegistryValueType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: RegistrySZ, RegistryExpandSZ, RegistryDWord

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-VersionOperator

Określa operator wersji.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-WhatIf

Pokazuje, co się stanie po uruchomieniu polecenia cmdlet. Polecenie cmdlet nie zostało uruchomione.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Typowe parametry

To polecenie cmdlet obsługuje typowe parametry: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction i -WarningVariable. Aby uzyskać więcej informacji, zobacz about_CommonParameters.

INPUTS

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

OUTPUTS

System.Object

UWAGI

RELATED LINKS

New-CMTaskSequenceGroup Get-CMTaskSequenceGroup Remove-CMTaskSequenceGroup