Set-CMTSStepSetDynamicVariable

SYNOPSIS

Skonfiguruj krok sekwencji zadań Ustaw zmienną dynamiczną.

SYNTAX

ByValue (wartość domyślna)

Set-CMTSStepSetDynamicVariable [-AddRule <IResultObject[]>] [-CleanRule] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] -InputObject <IResultObject> [-IsContinueOnError <Boolean>]
 [-IsEnabled <Boolean>] [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile]
 [-RemoveConditionFolder] [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem]
 [-RemoveConditionQueryWmi] [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable]
 [-StepName <String>] [-StepOrder <ReorderType>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ById

Set-CMTSStepSetDynamicVariable [-AddRule <IResultObject[]>] [-CleanRule] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>] [-IsEnabled <Boolean>]
 [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile] [-RemoveConditionFolder]
 [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem] [-RemoveConditionQueryWmi]
 [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable] [-StepName <String>]
 [-StepOrder <ReorderType>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling]
 [-WhatIf] [-Confirm] [<CommonParameters>]

WedługNazwa

Set-CMTSStepSetDynamicVariable [-AddRule <IResultObject[]>] [-CleanRule] [-AddCondition <IResultObject[]>]
 [-ClearCondition] [-Description <String>] [-IsContinueOnError <Boolean>] [-IsEnabled <Boolean>]
 [-MoveToIndex <Int32>] [-NewStepName <String>] [-RemoveConditionFile] [-RemoveConditionFolder]
 [-RemoveConditionIfStatement] [-RemoveConditionOperatingSystem] [-RemoveConditionQueryWmi]
 [-RemoveConditionRegistry] [-RemoveConditionSoftware] [-RemoveConditionVariable] [-StepName <String>]
 [-StepOrder <ReorderType>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling]
 [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionIfStatement

Set-CMTSStepSetDynamicVariable [-Condition <IResultObject[]>] [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionIfStatement

Set-CMTSStepSetDynamicVariable [-Condition <IResultObject[]>] [-SetConditionIfStatement]
 [-StatementType <ConditionStatementType>] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionIfStatement

Set-CMTSStepSetDynamicVariable [-Condition <IResultObject[]>] -InputObject <IResultObject>
 [-SetConditionIfStatement] [-StatementType <ConditionStatementType>] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionVariable

Set-CMTSStepSetDynamicVariable [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 [-OperatorType <VariableOperatorType>] [-SetConditionVariable] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionVariable

Set-CMTSStepSetDynamicVariable [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 [-OperatorType <VariableOperatorType>] [-SetConditionVariable] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionVariable

Set-CMTSStepSetDynamicVariable [-ConditionVariableName <String>] [-ConditionVariableValue <String>]
 -InputObject <IResultObject> [-OperatorType <VariableOperatorType>] [-SetConditionVariable]
 [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm]
 [<CommonParameters>]

ByIdSetConditionFile

Set-CMTSStepSetDynamicVariable [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile] [-StepName <String>]
 -TaskSequenceId <String> [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFile

Set-CMTSStepSetDynamicVariable [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] [-SetConditionFile] [-StepName <String>]
 -TaskSequenceName <String> [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFile

Set-CMTSStepSetDynamicVariable [-FileDateTimeOperator <VariableOperatorType>] [-FilePath <String>]
 [-FileTimestamp <DateTime>] [-FileVersion <String>] -InputObject <IResultObject> [-SetConditionFile]
 [-StepName <String>] [-VersionOperator <VariableOperatorType>] [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionFolder

Set-CMTSStepSetDynamicVariable [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>] -TaskSequenceId <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionFolder

Set-CMTSStepSetDynamicVariable [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] [-SetConditionFolder] [-StepName <String>] -TaskSequenceName <String>
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionFolder

Set-CMTSStepSetDynamicVariable [-FolderDateTimeOperator <VariableOperatorType>] [-FolderPath <String>]
 [-FolderTimestamp <DateTime>] -InputObject <IResultObject> [-SetConditionFolder] [-StepName <String>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionQueryWmi

Set-CMTSStepSetDynamicVariable -InputObject <IResultObject> [-Namespace <String[]>] [-Query <String>]
 [-SetConditionQueryWmi] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionOperatingSystem

Set-CMTSStepSetDynamicVariable -InputObject <IResultObject> [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByValueSetConditionRegistry

Set-CMTSStepSetDynamicVariable -InputObject <IResultObject> [-RegistryKey <String>]
 [-RegistryOperator <VariableOperatorType>] [-RegistryValueData <String>] [-RegistryValueName <String>]
 [-RootKey <RegistryRootKeyType>] [-SetConditionRegistry] [-StepName <String>] [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByValueSetConditionSoftware

Set-CMTSStepSetDynamicVariable -InputObject <IResultObject> [-IsAnyVersion <Boolean>] [-MsiFilePath <String>]
 [-SetConditionSoftware] [-StepName <String>] [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionSoftware

Set-CMTSStepSetDynamicVariable [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware]
 [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByNameSetConditionSoftware

Set-CMTSStepSetDynamicVariable [-IsAnyVersion <Boolean>] [-MsiFilePath <String>] [-SetConditionSoftware]
 [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionQueryWmi

Set-CMTSStepSetDynamicVariable [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi]
 [-StepName <String>] -TaskSequenceId <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByNameSetConditionQueryWmi

Set-CMTSStepSetDynamicVariable [-Namespace <String[]>] [-Query <String>] [-SetConditionQueryWmi]
 [-StepName <String>] -TaskSequenceName <String> [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf]
 [-Confirm] [<CommonParameters>]

ByIdSetConditionRegistry

Set-CMTSStepSetDynamicVariable [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>]
 [-RegistryValueData <String>] [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>]
 [-SetConditionRegistry] [-StepName <String>] -TaskSequenceId <String> [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionRegistry

Set-CMTSStepSetDynamicVariable [-RegistryKey <String>] [-RegistryOperator <VariableOperatorType>]
 [-RegistryValueData <String>] [-RegistryValueName <String>] [-RootKey <RegistryRootKeyType>]
 [-SetConditionRegistry] [-StepName <String>] -TaskSequenceName <String> [-ValueType <RegistryValueType>]
 [-DisableWildcardHandling] [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByIdSetConditionOperatingSystem

Set-CMTSStepSetDynamicVariable [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] -TaskSequenceId <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

ByNameSetConditionOperatingSystem

Set-CMTSStepSetDynamicVariable [-SetConditionOperatingSystem] [-StepName <String>]
 [-SupportedPlatform <IResultObject[]>] -TaskSequenceName <String> [-DisableWildcardHandling]
 [-ForceWildcardHandling] [-WhatIf] [-Confirm] [<CommonParameters>]

DESCRIPTION

To polecenie cmdlet pozwala ustawić właściwości, opcje i warunki dla kroku Ustaw zmienną dynamiczną w sekwencji zadań. Aby uzyskać więcej informacji, zobacz About task sequence steps - Set Dynamic Variables ( Informacje o krokach sekwencji zadań — ustawianie zmiennych dynamicznych).

Uwaga

Uruchom Menedżer konfiguracji cmdlet z Menedżer konfiguracji lokacji, na przykład PS XYZ:\> . Aby uzyskać więcej informacji, zobacz wprowadzenie.

EXAMPLES

Przykład 1. Konfigurowanie kroku przy użyciu warunku i dwóch reguł

To polecenie najpierw zapisuje docelowy obiekt sekwencji zadań w zmiennej. Następnie tworzy obiekt warunku sekwencji zadań. Istnieją dwa zastosowania polecenia New-CMTSRule do tworzenia obiektów reguł. Ostatni wiersz uruchamia to polecenie cmdlet, przekazując obiekt sekwencji zadań. Powoduje wyczyszczenie wszystkich istniejących warunków i reguł oraz dodanie nowych.

$ts = Get-CMTaskSequence -Name "Default IPU"

$tscondition = New-CMTSStepConditionVariable -ConditionVariableName "_SMSTSInWinPE" -ConditionVariableValue "false" -OperatorType Equals

$tsrule1 = New-CMTSRule -DefaultGateway "192.168.10.1" -Variable @{'OSDRegisteredUserName' = 'Contoso';'OSDRegisteredOrgName' = 'Contoso'}
$tsrule2 = New CMTSRule -Make "Surface" -Model "*" -Variable @{'custTattoo1' = 'AllSurface'}

$ts | Set-CMTaskSequenceStepSetDynamicVariable -ClearCondition -AddCondition $tscondition -CleanRule -AddRule ($tsrule1,$tsrule2)

PARAMETERS

-AddCondition

Określ obiekty warunku sekwencji zadań do dodania. Aby uzyskać ten obiekt, użyj jednego z następujących polecenia cmdlet:

• New-CMTSStepConditionFile
• New-CMTSStepConditionFolder
• New-CMTSStepConditionIfStatement
• New-CMTSStepConditionOperatingSystem
• New-CMTSStepConditionOperatingSystemLanguage
• New-CMTSStepConditionQueryWmi
• New-CMTSStepConditionRegistry
• New-CMTSStepConditionSoftware
• New-CMTSStepConditionVariable

Type: IResultObject[]
Parameter Sets: ByValue, ById, ByName
Aliases: AddConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-AddRule

Określ obiekt reguły sekwencji zadań. Reguły definiują kryteria i zmienne do ustawienia podczas oceniania wartości true. Aby uzyskać ten obiekt, użyj polecenia cmdlet New-CMTSRule.

Type: IResultObject[]
Parameter Sets: ByValue, ById, ByName
Aliases: AddRules

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-CleanRule

Dodaj ten parametr, aby usunąć wszystkie istniejące reguły. Użyj tego parametru z addRule parametru.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases: CleanRules

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ClearCondition

Dodaj ten parametr, aby usunąć wszystkie istniejące warunki.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases: ClearConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Warunek

Określa warunki. Ten parametr jest używany z jednym z następujących parametrów: SetConditionIfStatement, SetConditionQueryWmi, SetConditionVariable, SetConditionOperatingSystem, SetConditionFile, SetConditionFolder, SetConditionRegistry i SetConditionSoftware.

Type: IResultObject[]
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: SubCondition, SubConditions

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableName

Określa nazwę zmiennej warunku.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Variable

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ConditionVariableValue

Określa wartość zmiennej warunku.

Type: String
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases: Value

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Confirm

Monituje o potwierdzenie przed uruchomieniem polecenia cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Description (Opis)

Podaj opcjonalny opis, który pomoże opisać krok w sekwencji zadań.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-DisableWildcardHandling

Ten parametr traktuje symbole wieloznaczne jako wartości literału znaków. Nie można połączyć go z forceWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileDateTimeOperator

Określa operator daty i czasu pliku.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FilePath

Określa ścieżkę pliku.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileTimestamp

Określa sygnaturę czasową pliku.

Type: DateTime
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FileVersion

Określa wersję pliku.

Type: String
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderDateTimeOperator

Określa operator daty i czasu folderu.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderPath

Określa ścieżkę folderu.

Type: String
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-FolderTimestamp

Określa sygnaturę czasową folderu.

Type: DateTime
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ForceWildcardHandling

Ten parametr przetwarza symbole wieloznaczne i może prowadzić do nieoczekiwanego zachowania (nie jest zalecane). Nie można połączyć go z disableWildcardHandling.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-InputObject

Określ obiekt sekwencji zadań, w którym chcesz dodać ten krok. Aby uzyskać ten obiekt, użyj polecenia cmdlet Get-CMTaskSequence.

Type: IResultObject
Parameter Sets: ByValue, ByValueSetConditionIfStatement, ByValueSetConditionVariable, ByValueSetConditionFile, ByValueSetConditionFolder, ByValueSetConditionQueryWmi, ByValueSetConditionOperatingSystem, ByValueSetConditionRegistry, ByValueSetConditionSoftware
Aliases: TaskSequence

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByValue)
Accept wildcard characters: False

-IsAnyVersion

Wskazuje, czy chcesz dopasować dowolną wersję produktu (tylko kod uaktualnienia). Ten parametr jest używany dla warunku oprogramowania.

Type: Boolean
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsContinueOnError

Ustaw ten parametr na wartość $true, aby włączyć opcję kroku Kontynuuj przy błędzie. Jeśli po włączeniu tej opcji wystąpi błąd podczas tego kroku, sekwencja zadań będzie kontynuowana.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepContinueOnError

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-IsEnabled

Ustaw ten parametr na $false, aby wyłączyć krok w sekwencji zadań. Sekwencja zadań nie uruchamia wyłączonych kroków.

Type: Boolean
Parameter Sets: ByValue, ById, ByName
Aliases: IsThisStepEnabled

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MoveToIndex

Określa kolejność tego kroku. Indeks zamówień jest oparty na 0. Ten parametr musi być używany w połączeniu z StepOrder parametru.

Type: Int32
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-MsiFilePath

Określa ścieżkę pliku MSI.

Type: String
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Przestrzeń nazw

Określa przestrzeń nazw usługi WMI. Ten parametr jest używany dla warunku WMI zapytania.

Type: String[]
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-NewStepName

Określ nazwę nowego kroku, aby zmienić jego nazwę.

Type: String
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-OperatorType

Określa typ operatora.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Query (Zapytanie)

Określa zapytanie.

Type: String
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryKey (Klucz rejestru)

Określa klucz rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryOperator

Określa operator rejestru.

Type: VariableOperatorType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueData

Określa dane wartości rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RegistryValueName (Nazwa_wartości_rejestru)

Określa nazwę wartości rejestru.

Type: String
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFile

Wskazuje usunięcie warunków typu Właściwości pliku.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionFolder

Wskazuje usunięcie warunków typu Właściwości folderu.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionIfStatement

Wskazuje usunięcie warunków typu If Statement.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionOperatingSystem

Wskazuje usunięcie warunków typu systemu operacyjnego.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionQueryWmi

Wskazuje usunięcie warunków typu WMI zapytania.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionRegistry

Wskazuje usunięcie warunków typu ustawienie rejestru.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionSoftware

Wskazuje usunięcie warunków typu Zainstalowane oprogramowanie.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RemoveConditionVariable

Wskazuje usunięcie warunków typu zmienna sekwencji zadań.

Type: SwitchParameter
Parameter Sets: ByValue, ById, ByName
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-RootKey

Określa klucz główny warunku typu ustawienia rejestru.

Type: RegistryRootKeyType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFile

Wskaż ustawienie wszystkich warunków typu Właściwości pliku.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionFolder

Wskaż ustawienie wszystkich warunków typu Właściwości folderu.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionFolder, ByNameSetConditionFolder, ByValueSetConditionFolder
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionIfStatement

Wskazuje ustawienie wszystkich warunków typu If Statement.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionOperatingSystem

Wskaż ustawienie wszystkich warunków typu systemu operacyjnego.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionQueryWmi

Wskazuje ustawienie wszystkich warunków typu WMI zapytania.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionQueryWmi, ByIdSetConditionQueryWmi, ByNameSetConditionQueryWmi
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionRegistry

Wskaż ustawienie wszystkich warunków typu Ustawienie rejestru.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionSoftware

Wskaż ustawienie wszystkich warunków typu Zainstalowane oprogramowanie.

Type: SwitchParameter
Parameter Sets: ByValueSetConditionSoftware, ByIdSetConditionSoftware, ByNameSetConditionSoftware
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SetConditionVariable

Wskaż ustawienie wszystkich warunków typu Zmienna sekwencji zadań.

Type: SwitchParameter
Parameter Sets: ByIdSetConditionVariable, ByNameSetConditionVariable, ByValueSetConditionVariable
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StatementType

Określa typ instrukcji.

Type: ConditionStatementType
Parameter Sets: ByIdSetConditionIfStatement, ByNameSetConditionIfStatement, ByValueSetConditionIfStatement
Aliases: Operator
Accepted values: All, Any, None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepName (Nazwa Kroku)

Określ nazwę kroku do skonfigurowania.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-StepOrder

Określa kolejność kroku. Jeśli moveToIndex jest określony, należy również określić MoveToIndex parametru.

Type: ReorderType
Parameter Sets: ByValue, ById, ByName
Aliases:
Accepted values: MoveUp, MoveDown, MoveToIndex

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-SupportedPlatform (ObsługiwanyPlatforma)

Określa obsługiwane platformy.

Type: IResultObject[]
Parameter Sets: ByValueSetConditionOperatingSystem, ByIdSetConditionOperatingSystem, ByNameSetConditionOperatingSystem
Aliases: SupportedPlatforms

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceId

Określ identyfikator sekwencji zadań, w której znajduje się ten krok. Ta wartość to standardowy identyfikator pakietu, na przykład XYZ00042 .

Type: String
Parameter Sets: ById, ByIdSetConditionIfStatement, ByIdSetConditionVariable, ByIdSetConditionFile, ByIdSetConditionFolder, ByIdSetConditionSoftware, ByIdSetConditionQueryWmi, ByIdSetConditionRegistry, ByIdSetConditionOperatingSystem
Aliases: Id, TaskSequencePackageId

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-TaskSequenceName

Określ nazwę sekwencji zadań, w której znajduje się ten krok.

Type: String
Parameter Sets: ByName, ByNameSetConditionIfStatement, ByNameSetConditionVariable, ByNameSetConditionFile, ByNameSetConditionFolder, ByNameSetConditionSoftware, ByNameSetConditionQueryWmi, ByNameSetConditionRegistry, ByNameSetConditionOperatingSystem
Aliases:

Required: True
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ValueType

Określa typ wartości.

Type: RegistryValueType
Parameter Sets: ByValueSetConditionRegistry, ByIdSetConditionRegistry, ByNameSetConditionRegistry
Aliases:
Accepted values: RegistrySZ, RegistryExpandSZ, RegistryDWord

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-VersionOperator

Określa operator wersji.

Type: VariableOperatorType
Parameter Sets: ByIdSetConditionFile, ByNameSetConditionFile, ByValueSetConditionFile
Aliases:
Accepted values: Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-WhatIf

Pokazuje, co się stanie po uruchomieniu polecenia cmdlet. Polecenie cmdlet nie jest uruchamiane.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Typowe parametry

To polecenie cmdlet obsługuje typowe parametry: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction i -WarningVariable. Aby uzyskać więcej informacji, zobacz about_CommonParameters.

INPUTS

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

OUTPUTS

System.Object

UWAGI

RELATED LINKS

New-CMTSStepSetDynamicVariable

Get-CMTSStepSetDynamicVariable

Remove-CMTSStepSetDynamicVariable

New-CMTSRule

Informacje o krokach sekwencji zadań — ustawianie zmiennych dynamicznych