Udostępnij za pośrednictwem


Walkthrough: Encrypting Configuration Information Using Protected Configuration

Provides a step-by-step example for encrypting sections of a configuration file for an ASP.NET application.

Protected Configuration helps improve the security of an application by letting you encrypt sensitive information that is stored in a Web.config file. You can use aspnet_regiis.exe to encrypt sections of the Web.config file and manage encryption keys. ASP.NET decrypts the configuration file when it processes the file. Therefore, decryption does not require any additional code. For more information about Protected Configuration, see Encrypting Configuration Information Using Protected Configuration.

During this walkthrough, you will learn how to do the following:

  • Encrypt sections of a Web.config file by using the default Protected Configuration provider.

  • Access decrypted configuration information in an ASP.NET page.

Prerequisites

In order to complete this walkthrough, you will need the following:

Granting Read Access to an RSA Encryption Key

Before ASP.NET can decrypt encrypted information in the Web.config file, the identity of your ASP.NET application must have read access to the encryption key that is used to encrypt and decrypt the encrypted sections. This walkthrough uses the default RsaProtectedConfigurationProvider provider that is specified in the Machine.config file and named "RsaProtectedConfigurationProvider". The RSA key container that is used by the default RsaProtectedConfigurationProvider provider is named "NetFrameworkConfigurationKey".

To grant the ASP.NET identity read access to the default RSA key container

  1. Open a text editor, and then copy the following code into a new file.

    <%@ Page Language="VB" %>
    <%
    Response.Write(System.Security.Principal.WindowsIdentity.GetCurrent().Name)
    %>
    
    <%@ Page Language="C#" %>
    <%
    Response.Write(System.Security.Principal.WindowsIdentity.GetCurrent().Name);
    %>
    
  2. Save the file in your application directory as identity.aspx.

  3. To determine the identity of your ASP.NET application, open identity.aspx in a browser.

    The impersonated identity of your ASP.NET application is displayed in the browser.

    Note

    Because you are using IIS for this walkthrough, do not use impersonation for the authentication for your site. That is, for this walkthrough, use only anonymous authentication as the identity of your ASP.NET application. If the identity of your application is the user ID that you are currently logged on as, such as DOMAIN\myuserid, in the Web.config file for the application, disable impersonation. To disable impersonation in the Web.config file, open the Web.config file, and then remove the <identity> element. After you remove the <identity> element, update identity.aspx in your browser to display the modified identity for the application.

  4. At the command prompt, run aspnet_regiis.exe with the following options:

    • The -pa option, followed by the name of the RSA key container for the default RsaProtectedConfigurationProvider.

    • The identity of your ASP.Net application, as determined in the preceding step.

    For example, the following command grants the NETWORK SERVICE account access to the machine-level "NetFrameworkConfigurationKey" RSA key container.

    Note

    On a computer that is running Microsoft Windows Server 2003 with impersonation for an ASP.NET application that is disabled in the Web.config file, the identity for the application is the identity of the application pool. By default, this is the NETWORK SERVICE account (on earlier versions of Windows, the identity is the local ASPNET account).

    aspnet_regiis -pa "NetFrameworkConfigurationKey" "NT AUTHORITY\NETWORK SERVICE"

    Do not close the Command Prompt window.

Encrypting Sections of the Web.config File

Now that the identity of your ASP.NET application has read access to the RSA key container for the default RsaProtectedConfigurationProvider object, you will encrypt sections of the Web.config file for your ASP.NET application by using that key container. Then, ASP.NET decrypts the sections when it processes the Web.config file.

To encrypt the <connectionStrings> and <machineKey> sections of the Web.config file

  1. In a text editor, open the Web.config file for your application.

    • If you do not have a Web.config file for your ASP.NET application, open a text editor, copy the example configuration into a new file, and then save the file in your ASP.NET application directory as web.config.
  2. Make sure that there is both a <connectionStrings> child element and a <machineKey> child element for the <system.web> element, as shown in the following example.

    <configuration>
       <connectionStrings>
          <add name="SqlServices" connectionString="Data Source=localhost;Integrated Security=SSPI;Initial Catalog=Northwind;" />
       </connectionStrings>
    
       <system.web>
    
         <machineKey validationKey="D61B3C89CB33A2F1422FF158AFF7320E8DB8CB5CDA1742572A487D94018787EF42682B202B746511891C1BAF47F8D25C07F6C39A104696DB51F17C529AD3CABE"
           decryptionKey="FBF50941F22D6A3B229EA593F24C41203DA6837F1122EF17" />
    
       </system.web>
    </configuration>
    
  3. Close the Web.config file.

  4. At the command prompt, change the directory to the .NET Framework version 2.0 directory by typing the following command:

    cd \WINDOWS\Microsoft.Net\Framework\v2.0.*

  5. At the command prompt, run aspnet_regiis.exe with the following options:

    • The -pe option and the string "connectionStrings" to encrypt the connectionStrings element of the Web.config file for your application.

    • The -app option and the name of your application.

    For example, the following command encrypts the <connectionStrings> section of the Web.config file for an application named MyApplication.

    aspnet_regiis -pe "connectionStrings" -app "/MyApplication"

  6. Repeat the preceding step for the <machineKey> child element of the <system.web> element, as shown in the following example:

    aspnet_regiis -pe "system.web/machineKey" -app "/MyApplication"

    Do not close the Command Prompt window.

  7. Open Web.config, and then view the encrypted contents.

    The contents will look similar to the following example Web.config file.

    <configuration>
    
       <connectionStrings configProtectionProvider="RsaProtectedConfigurationProvider">
          <EncryptedData Type="http://www.w3.org/2001/04/xmlenc#Element"
             xmlns="http://www.w3.org/2001/04/xmlenc#">
             <EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc" />
             <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
                <EncryptedKey xmlns="http://www.w3.org/2001/04/xmlenc#">
                   <EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-1_5" />
                   <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
                      <KeyName>RSA Key
                      </KeyName>
                   </KeyInfo>
                   <CipherData>
                      <CipherValue>WcFEbDX8VyLfAsVK8g6hZVAG1674ZFc1kWH0BoazgOwdBfinhcAmQmnIn0oHtZ5tO2EXGl+dyh10giEmO9NemH4YZk+iMIln+ItcEay9CGWMXSen9UQLpcQHQqMJErZiPK4qPZaRWwqckLqriCl9X8x9OE7jKIsO2Ibapwj+1Jo=
                      </CipherValue>
                   </CipherData>
                </EncryptedKey>
             </KeyInfo>
             <CipherData>
                <CipherValue>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
                </CipherValue>
             </CipherData>
          </EncryptedData>
       </connectionStrings>
    
       <system.web>
         <machineKey configProtectionProvider="RsaProtectedConfigurationProvider">
           <EncryptedData Type="http://www.w3.org/2001/04/xmlenc#Element"
             xmlns="http://www.w3.org/2001/04/xmlenc#">
             <EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc" />
             <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
               <EncryptedKey xmlns="http://www.w3.org/2001/04/xmlenc#">
                 <EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-1_5" />
                 <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
                   <KeyName>RSA Key
                   </KeyName>
                 </KeyInfo>
                 <CipherData>
                   <CipherValue>IwUopItbWX0mJdGWtAqE1LlsG3u5RBRlAXs9/GZj3HEfeUXduHVF76q6Ip88YqlfLthH+DMBYdOZAF+hCOmS2agfTo1tKUvELRGIljS/BqEYxUO+/IOz9tllAw8ZlGF7AVCzptgIejI+iLXEZfMKW7f6EMGeb5vaaKXHIkYZwcM=
                   </CipherValue>
                 </CipherData>
               </EncryptedKey>
             </KeyInfo>
             <CipherData>
               <CipherValue>ivVyERVPNUzIb/i7/NUbRkxsxh8IG959vycwrzJO0vYWxHZ5i03SfrLbsGUV17+FxZ6lbcrVaF5FY3zVm7dRMRvQpVFwaVcL
               </CipherValue>
             </CipherData>
           </EncryptedData>
         </machineKey>
    
       </system.web>
    </configuration>
    
  8. Close the Web.config file.

Accessing Decrypted Configuration Settings

ASP.NET automatically decrypts the contents of the Web.config file when it processes the file. Therefore, no additional steps are required to decrypt the encrypted configuration settings for use by other ASP.NET features or to access the values in your code. However, you can follow these steps, if you want to view the decrypted settings.

To view the decrypted configuration values

  1. Open a text editor, and then copy the following ASP.NET code into a new file.

    <%@ Page Language="VB" %>
    <%@ Import Namespace="System.Configuration" %>
    <%@ Import Namespace="System.Web.Configuration" %>
    <script runat="server">
    
    Public Sub Page_Load()
    
      ConnectionStringsGrid.DataSource = ConfigurationManager.ConnectionStrings
      ConnectionStringsGrid.DataBind()
    
      Dim config As System.Configuration.Configuration = _
        WebConfigurationManager.OpenWebConfiguration(Request.ApplicationPath)
      Dim key As MachineKeySection = _
        CType(config.GetSection("system.web/machineKey"), MachineKeySection)
      DecryptionKey.Text = key.DecryptionKey
      ValidationKey.Text = key.ValidationKey
    
    End Sub
    
    </script>
    <html>
    
    <body>
    
    <form runat="server">
    
      <asp:GridView runat="server" CellPadding="4" id="ConnectionStringsGrid" />
      <P>
      MachineKey.DecryptionKey = <asp:Label runat="Server" id="DecryptionKey" /><BR>
      MachineKey.ValidationKey = <asp:Label runat="Server" id="ValidationKey" />
    
    </form>
    
    </body>
    </html>
    
    <%@ Page Language="C#" %>
    <%@ Import Namespace="System.Configuration" %>
    <%@ Import Namespace="System.Web.Configuration" %>
    <script runat="server">
    
    public void Page_Load()
    {
      ConnectionStringsGrid.DataSource = ConfigurationManager.ConnectionStrings;
      ConnectionStringsGrid.DataBind();
    
      Configuration config = WebConfigurationManager.OpenWebConfiguration(Request.ApplicationPath);
      MachineKeySection key = 
        (MachineKeySection)config.GetSection("system.web/machineKey");
      DecryptionKey.Text = key.DecryptionKey;
      ValidationKey.Text = key.ValidationKey;
    }
    
    </script>
    <html>
    
    <body>
    
    <form runat="server">
    
      <asp:GridView runat="server" CellPadding="4" id="ConnectionStringsGrid" />
      <P>
      MachineKey.DecryptionKey = <asp:Label runat="Server" id="DecryptionKey" /><BR>
      MachineKey.ValidationKey = <asp:Label runat="Server" id="ValidationKey" />
    
    </form>
    
    </body>
    </html>
    
  2. Save the file as walkthrough.aspx, and then view the file in the browser.

    You will see the decrypted values from your encrypted Web.config file.

  3. To keep the sensitive information from the Web site private, delete the walkthrough.aspx file when you are finished with this walkthrough.

Next Steps

You can decrypt the encrypted Web.config file contents, if you want to, by running aspnet_regiis.exe with the -pd option. The syntax is the same as the syntax for encrypting Web.config file contents with the -pe option, except that you do not specify a Protected Configuration provider. The appropriate provider is identified using the configProtectionProvider element for the protected section. For example, the following commands decrypt the <connectionStrings> element and the <machineKey> child element of the <system.web> element in the Web.config file for the ASP.NET application named MyApplication.

aspnet_regiis -pd "connectionStrings" -app "/MyApplication"

aspnet_regiis -pd "system.web/machineKey" -app "/MyApplication"

See Also

Tasks

Walkthrough: Creating and Exporting an RSA Key Container

Other Resources

Encrypting Configuration Information Using Protected Configuration