Bug Check 0xFE: BUGCODE_USB_DRIVER
The BUGCODE_USB_DRIVER bug check has a value of 0x000000FE. This indicates that an error has occurred in a universal serial bus (USB) driver.
Important
This article is for programmers. If you're a customer who has received a blue screen error code while using your computer, see Troubleshoot blue screen errors.
BUGCODE_USB_DRIVER Parameters
The four bug check parameters are displayed on the bug check stop screen and available using !analyze. Parameter 1 identifies the type of violation.
| Parameter 1 | Parameter 2 | Parameter 3 | Parameter 4 | Cause of Error |
|---|---|---|---|---|
| 0x1 | Reserved | Reserved | Reserved | An internal error has occurred in the USB stack. |
| 0x2 | Address of the pending IRP | Address of the IRP that was passed in | Address of the USB request block (URB) that caused the error | The USB client driver has submitted a URB that is still attached to another IRP pending in the bus driver. |
| 0x3 | Reserved | Reserved | Reserved | The USB miniport driver has generated a bug check. This usually happens in response to a hardware failure. |
| 0x4 | Address of the IRP | Address of the URB | Reserved | The caller has submitted an IRP that is already pending in the USB bus driver. |
| 0x5 | Device extension pointer of the host controller | PCI vendor, product id for the controller | Pointer to endpoint data structure | A hardware failure has occurred because of a bad physical address found in a hardware data structure. |
| 0x6 | Object address | Signature that was expected | Reserved | An internal data structure (object) is corrupted. |
| 0x7 | Pointer to usbport.sys debug log | Message string | File name | See the provided message string for detailed information. |
| 0x8 | 1 | Reserved | Reserved | Reserved |
| 2 | Device object | IRP | An IRP was received by the hub driver that it does not expect or has not registered for. | |
| 3 | Reserved | Reserved | Reserved | |
| 4 | PDO if Parameter 3 is not NULL. Context if Parameter 3 is NULL. | Context or NULL | Fatal PDO trap | |
| 5 | Reserved | Reserved | Reserved | |
| 6 | Time-out code. See the table below. | Time-out code context: port data | Fatal time-out |
If Parameter 1 has a value of 8 and Parameter 2 has a value of 6, then Parameter 3 is a time-out code. Possible values for the time-out code are given in the following table.
| Time-out code | Meaning |
|---|---|
0 |
Non-fatal time-out |
1 |
Failed resuming a suspended port. |
2 |
Timed out waiting for a reset, initiated by a client driver, to complete before suspending the port. |
3 |
Timed out waiting for the port to complete resume before suspending it. |
4 |
Timed out waiting for the port-change state machine to be disabled prior to suspending the port. |
5 |
Timed out waiting for a suspend-port request to complete. |
6 |
Timed out waiting for the port-change state machine to be disabled. |
7 |
Timed out waiting for the port-change state machine to be closed. |
8 |
Timed out waiting for the hub to resume from selective suspend. |
9 |
Timed out waiting for the hub to resume from selective suspend prior to system suspend. |
10 |
Timed out waiting for port-change state machine to become idle. |
Resolution
The !analyze debug extension displays information about the bug check and can be helpful in determining the root cause.