Aplicativos ASP.NET usando identificadores de espera
Os modelos de retorno de chamada e sondagem para lidar com operações assíncronas são úteis quando seu aplicativo está processando apenas uma operação assíncrona de cada vez. Os modelos Wait fornecem uma maneira mais flexível de processar várias operações assíncronas. Há dois modelos Wait, nomeados segundo os métodos WaitHandle usados para implementá-los: o modelo Wait (Any) e o modelo Wait (All).
Para usar um modelo Wait, você precisa usar a propriedade AsyncWaitHandle do objeto IAsyncResult retornado pelos métodos BeginExecuteNonQuery, BeginExecuteReader ou BeginExecuteXmlReader. Os métodos WaitAny e WaitAll exigem que você envie os objetos WaitHandle como um argumento, agrupados juntos em uma matriz.
Ambos os métodos Wait monitoram as operações assíncronas, aguardando a conclusão. O método WaitAny aguarda a conclusão de qualquer uma das operações ou o tempo limite. Quando você souber que uma operação específica foi concluída, poderá processar seus resultados e continuar aguardando a conclusão da próxima operação ou o tempo limite. O método WaitAll aguarda todos os processos na matriz de instâncias WaitHandle serem concluídos ou atingir o tempo limite antes de continuar.
O benefício dos modelos Wait é mais perceptível quando você precisa executar várias operações com duração considerável em servidores diferentes ou então quando o seu servidor é suficientemente poderoso para processar todas as consultas simultaneamente. Nos exemplos apresentados aqui, três consultas emulam processos longos adicionando comando WAITFOR de durações variáveis a consultas SELECT sem relevância.
Exemplo: modelo Wait (Any)
O exemplo a seguir ilustra o modelo Wait (Any). Depois que três processos assíncronos são iniciados, o método WaitAny é chamado para aguardar a conclusão de qualquer um deles. À medida que cada processo é concluído, o método EndExecuteReader é chamado e o objeto SqlDataReader resultante é lido. Nesse ponto, um aplicativo do mundo real provavelmente usará o SqlDataReader para popular uma parte da página. Neste exemplo simples, a hora em que o processo foi concluído é adicionada a uma caixa de texto correspondente ao processo. Em conjunto, os horários nas caixas de texto ilustram o ponto: o código é executado cada vez que um processo é concluído.
Para configurar este exemplo, crie um projeto de site do ASP.NET. Coloque um controle Button e quatro controles TextBox na página (aceitando o nome padrão de cada controle).
Adicione o código a seguir à classe do formulário, modificando a cadeia de conexão conforme o necessário para o seu ambiente.
' Add these to the top of the class
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Threading
' Add this code to the page's class:
Private Function GetConnectionString() As String
' To avoid storing the connection string in your code,
' you can retrieve it from a configuration file.
' If you have not included "Asynchronous Processing=true"
' in the connection string, the command will not be able
' to execute asynchronously.
Return "..." & _
"Asynchronous Processing=true"
End Function
Sub Button1_Click( _
ByVal sender As Object, ByVal e As System.EventArgs)
' In a real-world application, you might be connecting to
' three different servers or databases. For the example,
' we connect to only one.
Dim connection1 As New SqlConnection(GetConnectionString())
Dim connection2 As New SqlConnection(GetConnectionString())
Dim connection3 As New SqlConnection(GetConnectionString())
' To keep the example simple, all three asynchronous
' processes select a row from the same table. WAITFOR
' commands are used to emulate long-running processes
' that complete after different periods of time.
Dim commandText1 As String = _
"WAITFOR DELAY '0:0:01';" & _
"SELECT * FROM Production.Product " & _
"WHERE ProductNumber = 'BL-2036'"
Dim commandText2 As String = _
"WAITFOR DELAY '0:0:05';" & _
"SELECT * FROM Production.Product " & _
"WHERE ProductNumber = 'BL-2036'"
Dim commandText3 As String = _
"WAITFOR DELAY '0:0:10';" & _
"SELECT * FROM Production.Product " & _
"WHERE ProductNumber = 'BL-2036'"
Dim waitHandles(2) As WaitHandle
Try
' For each process, open a connection and begin execution.
' Use the IAsyncResult object returned by
' BeginExecuteReader to add a WaitHandle for the process
' to the array.
connection1.Open()
Dim command1 As New SqlCommand(commandText1, connection1)
Dim result1 As IAsyncResult = _
command1.BeginExecuteReader()
waitHandles(0) = result1.AsyncWaitHandle
connection2.Open()
Dim command2 As New SqlCommand(commandText2, connection2)
Dim result2 As IAsyncResult = _
command2.BeginExecuteReader()
waitHandles(1) = result2.AsyncWaitHandle
connection3.Open()
Dim command3 As New SqlCommand(commandText3, connection3)
Dim result3 As IAsyncResult = _
command3.BeginExecuteReader()
waitHandles(2) = result3.AsyncWaitHandle
Dim index As Integer
For countWaits As Integer = 1 To 3
' WaitAny waits for any of the processes to complete.
' The return value is either the index of the
' array element whose process just completed, or
' the WaitTimeout value.
index = WaitHandle.WaitAny(waitHandles, 60000, False)
' This example doesn't actually do anything with the
' data returned by the processes, but the code opens
' readers for each just to demonstrate the concept.
' Instead of using the returned data to fill the
' controls on the page, the example adds the time
' the process was completed to the corresponding
' text box.
Select Case index
Case 0
Dim reader1 As SqlDataReader
reader1 = command1.EndExecuteReader(result1)
If reader1.Read Then
TextBox1.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
End If
reader1.Close()
Case 1
Dim reader2 As SqlDataReader
reader2 = command2.EndExecuteReader(result2)
If reader2.Read Then
TextBox2.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
End If
reader2.Close()
Case 2
Dim reader3 As SqlDataReader
reader3 = command3.EndExecuteReader(result3)
If reader3.Read Then
TextBox3.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
End If
reader3.Close()
Case WaitHandle.WaitTimeout
Throw New Exception("Timeout")
End Select
Next
Catch ex As Exception
TextBox4.Text = ex.ToString
End Try
connection1.Close()
connection2.Close()
connection3.Close()
End Sub
// Add the following using directives, if they aren't already there.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Threading;
using System.Data.SqlClient;
// Add this code to the page's class
string GetConnectionString()
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true"
// in the connection string, the command will not be able
// to execute asynchronously.
{
return "/* Rest of connection string */" + "Asynchronous Processing=true";
}
void Button1_Click(object sender, System.EventArgs e)
{
// In a real-world application, you might be connecting to
// three different servers or databases. For the example,
// we connect to only one.
SqlConnection connection1 =
new SqlConnection(GetConnectionString());
SqlConnection connection2 =
new SqlConnection(GetConnectionString());
SqlConnection connection3 =
new SqlConnection(GetConnectionString());
// To keep the example simple, all three asynchronous
// processes select a row from the same table. WAITFOR
// commands are used to emulate long-running processes
// that complete after different periods of time.
string commandText1 = "WAITFOR DELAY '0:0:01';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
string commandText2 = "WAITFOR DELAY '0:0:05';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
string commandText3 = "WAITFOR DELAY '0:0:10';" +
"SELECT * FROM Production.Product " +
"WHERE ProductNumber = 'BL-2036'";
try
// For each process, open a connection and begin
// execution. Use the IAsyncResult object returned by
// BeginExecuteReader to add a WaitHandle for the
// process to the array.
{
connection1.Open();
SqlCommand command1 =
new SqlCommand(commandText1, connection1);
IAsyncResult result1 = command1.BeginExecuteReader();
WaitHandle waitHandle1 = result1.AsyncWaitHandle;
connection2.Open();
SqlCommand command2 =
new SqlCommand(commandText2, connection2);
IAsyncResult result2 = command2.BeginExecuteReader();
WaitHandle waitHandle2 = result2.AsyncWaitHandle;
connection3.Open();
SqlCommand command3 =
new SqlCommand(commandText3, connection3);
IAsyncResult result3 = command3.BeginExecuteReader();
WaitHandle waitHandle3 = result3.AsyncWaitHandle;
WaitHandle[] waitHandles = {
waitHandle1, waitHandle2, waitHandle3
};
int index;
for (int countWaits = 0; countWaits <= 2; countWaits++)
{
// WaitAny waits for any of the processes to
// complete. The return value is either the index
// of the array element whose process just
// completed, or the WaitTimeout value.
index = WaitHandle.WaitAny(waitHandles,
60000, false);
// This example doesn't actually do anything with
// the data returned by the processes, but the
// code opens readers for each just to demonstrate
// the concept.
// Instead of using the returned data to fill the
// controls on the page, the example adds the time
// the process was completed to the corresponding
// text box.
switch (index)
{
case 0:
SqlDataReader reader1;
reader1 =
command1.EndExecuteReader(result1);
if (reader1.Read())
{
TextBox1.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader1.Close();
break;
case 1:
SqlDataReader reader2;
reader2 =
command2.EndExecuteReader(result2);
if (reader2.Read())
{
TextBox2.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader2.Close();
break;
case 2:
SqlDataReader reader3;
reader3 =
command3.EndExecuteReader(result3);
if (reader3.Read())
{
TextBox3.Text =
"Completed " +
System.DateTime.Now.ToLongTimeString();
}
reader3.Close();
break;
case WaitHandle.WaitTimeout:
throw new Exception("Timeout");
break;
}
}
}
catch (Exception ex)
{
TextBox4.Text = ex.ToString();
}
connection1.Close();
connection2.Close();
connection3.Close();
}
Exemplo: modelo Wait (All)
O exemplo a seguir ilustra o modelo Wait (All). Depois que três processos assíncronos são iniciados, o método WaitAll é chamado para aguardar a conclusão dos processos ou que eles atinjam o próprio tempo limite.
Assim como ocorre no exemplo do modelo Wait (Any), a hora em que o processo foi concluído é adicionada a uma caixa de texto correspondente ao processo. Novamente, os horários nas caixas de texto ilustram o ponto: o código após o método WaitAny é executado somente após a conclusão de todos os processos.
Para configurar este exemplo, crie um projeto de site do ASP.NET. Coloque um controle Button e quatro controles TextBox na página (aceitando o nome padrão de cada controle).
Adicione o código a seguir à classe do formulário, modificando a cadeia de conexão conforme o necessário para o seu ambiente.
' Add these to the top of the class
Imports System
Imports System.Data
Imports System.Data.SqlClient
Imports System.Threading
' Add this code to the page's class:
Private Function GetConnectionString() As String
' To avoid storing the connection string in your code,
' you can retrieve it from a configuration file.
' If you have not included "Asynchronous Processing=true"
' in the connection string, the command will not be able
' to execute asynchronously.
Return "..." & _
"Asynchronous Processing=true"
End Function
Sub Button1_Click( _
ByVal sender As Object, ByVal e As System.EventArgs)
' In a real-world application, you might be connecting to
' three different servers or databases. For the example,
' we connect to only one.
Dim connection1 As New SqlConnection(GetConnectionString())
Dim connection2 As New SqlConnection(GetConnectionString())
Dim connection3 As New SqlConnection(GetConnectionString())
' To keep the example simple, all three asynchronous
' processes select a row from the same table. WAITFOR
' commands are used to emulate long-running processes
' that complete after different periods of time.
Dim commandText1 As String = _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint + 1 " & _
"WHERE ReorderPoint Is Not Null;" & _
"WAITFOR DELAY '0:0:01';" & _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint - 1 " & _
"WHERE ReorderPoint Is Not Null"
Dim commandText2 As String = _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint + 1 " & _
"WHERE ReorderPoint Is Not Null;" & _
"WAITFOR DELAY '0:0:05';" & _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint - 1 " & _
"WHERE ReorderPoint Is Not Null"
Dim commandText3 As String = _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint + 1 " & _
"WHERE ReorderPoint Is Not Null;" & _
"WAITFOR DELAY '0:0:10';" & _
"UPDATE Production.Product " & _
"SET ReorderPoint = ReorderPoint - 1 " & _
"WHERE ReorderPoint Is Not Null"
Dim waitHandles(2) As WaitHandle
Try
' For each process, open a connection and begin execution.
' Use the IAsyncResult object returned by
' BeginExecuteReader to add a WaitHandle for the process
' to the array.
connection1.Open()
Dim command1 As New SqlCommand(commandText1, connection1)
Dim result1 As IAsyncResult = _
command1.BeginExecuteNonQuery()
waitHandles(0) = result1.AsyncWaitHandle
connection2.Open()
Dim command2 As New SqlCommand(commandText2, connection2)
Dim result2 As IAsyncResult = _
command2.BeginExecuteNonQuery()
waitHandles(1) = result2.AsyncWaitHandle
connection3.Open()
Dim command3 As New SqlCommand(commandText3, connection3)
Dim result3 As IAsyncResult = _
command3.BeginExecuteNonQuery()
waitHandles(2) = result3.AsyncWaitHandle
' WaitAll waits for all of the processes to complete.
' The return value is True if all processes completed,
' False if any process timed out.
Dim result As Boolean = _
WaitHandle.WaitAll(waitHandles, 60000, False)
If result Then
Dim rowCount1 As Long = _
command1.EndExecuteNonQuery(result1)
TextBox1.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
Dim rowCount2 As Long = _
command2.EndExecuteNonQuery(result2)
TextBox2.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
Dim rowCount3 As Long = _
command3.EndExecuteNonQuery(result3)
TextBox3.Text = _
"Completed " & _
System.DateTime.Now.ToLongTimeString()
Else
Throw New Exception("Timeout")
End If
Catch ex As Exception
TextBox4.Text = ex.ToString
End Try
connection1.Close()
connection2.Close()
connection3.Close()
End Sub
// Add the following using directives, if they aren't already there.
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Threading;
using System.Data.SqlClient;
// Add this code to the page's class
string GetConnectionString()
// To avoid storing the connection string in your code,
// you can retrieve it from a configuration file.
// If you have not included "Asynchronous Processing=true"
// in the connection string, the command will not be able
// to execute asynchronously.
{
return "..." +
"Asynchronous Processing=true";
}
void Button1_Click(object sender, System.EventArgs e)
{
// In a real-world application, you might be connecting to
// three different servers or databases. For the example,
// we connect to only one.
SqlConnection connection1 =
new SqlConnection(GetConnectionString());
SqlConnection connection2 =
new SqlConnection(GetConnectionString());
SqlConnection connection3 =
new SqlConnection(GetConnectionString());
// To keep the example simple, all three asynchronous
// processes execute UPDATE queries that result in
// no change to the data. WAITFOR
// commands are used to emulate long-running processes
// that complete after different periods of time.
string commandText1 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:01';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
string commandText2 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:05';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
string commandText3 =
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint + 1 " +
"WHERE ReorderPoint Is Not Null;" +
"WAITFOR DELAY '0:0:10';" +
"UPDATE Production.Product " +
"SET ReorderPoint = ReorderPoint - 1 " +
"WHERE ReorderPoint Is Not Null";
try
// For each process, open a connection and begin
// execution. Use the IAsyncResult object returned by
// BeginExecuteReader to add a WaitHandle for the
// process to the array.
{
connection1.Open();
SqlCommand command1 =
new SqlCommand(commandText1, connection1);
IAsyncResult result1 = command1.BeginExecuteNonQuery();
WaitHandle waitHandle1 = result1.AsyncWaitHandle;
connection2.Open();
SqlCommand command2 =
new SqlCommand(commandText2, connection2);
IAsyncResult result2 = command2.BeginExecuteNonQuery();
WaitHandle waitHandle2 = result2.AsyncWaitHandle;
connection3.Open();
SqlCommand command3 =
new SqlCommand(commandText3, connection3);
IAsyncResult result3 = command3.BeginExecuteNonQuery();
WaitHandle waitHandle3 = result3.AsyncWaitHandle;
WaitHandle[] waitHandles = {
waitHandle1, waitHandle2, waitHandle3
};
bool result;
// WaitAll waits for all of the processes to
// complete. The return value is True if the processes
// all completed successfully, False if any process
// timed out.
result = WaitHandle.WaitAll(waitHandles, 60000, false);
if(result)
{
long rowCount1 =
command1.EndExecuteNonQuery(result1);
TextBox1.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
long rowCount2 =
command2.EndExecuteNonQuery(result2);
TextBox2.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
long rowCount3 =
command3.EndExecuteNonQuery(result3);
TextBox3.Text = "Completed " +
System.DateTime.Now.ToLongTimeString();
}
else
{
throw new Exception("Timeout");
}
}
catch (Exception ex)
{
TextBox4.Text = ex.ToString();
}
connection1.Close();
connection2.Close();
connection3.Close();
}