Set-NetQosPolicy
Updates the QoS policy settings.
Syntax
Set-NetQosPolicy
[[-Name] <String[]>]
[-PolicyStore <String>]
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-TemplateMatchCondition <Template>]
[-UserMatchCondition <String>]
[-AppPathNameMatchCondition <String>]
[-IPProtocolMatchCondition <Protocol>]
[-IPPortMatchCondition <UInt16>]
[-IPSrcPrefixMatchCondition <String>]
[-IPSrcPortMatchCondition <UInt16>]
[-IPSrcPortStartMatchCondition <UInt16>]
[-IPSrcPortEndMatchCondition <UInt16>]
[-IPDstPrefixMatchCondition <String>]
[-IPDstPortMatchCondition <UInt16>]
[-IPDstPortStartMatchCondition <UInt16>]
[-IPDstPortEndMatchCondition <UInt16>]
[-NetDirectPortMatchCondition <UInt16>]
[-URIMatchCondition <String>]
[-URIRecursiveMatchCondition <Boolean>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-NetQosPolicy
-InputObject <CimInstance[]>
[-NetworkProfile <NetworkProfile>]
[-Precedence <UInt32>]
[-TemplateMatchCondition <Template>]
[-UserMatchCondition <String>]
[-AppPathNameMatchCondition <String>]
[-IPProtocolMatchCondition <Protocol>]
[-IPPortMatchCondition <UInt16>]
[-IPSrcPrefixMatchCondition <String>]
[-IPSrcPortMatchCondition <UInt16>]
[-IPSrcPortStartMatchCondition <UInt16>]
[-IPSrcPortEndMatchCondition <UInt16>]
[-IPDstPrefixMatchCondition <String>]
[-IPDstPortMatchCondition <UInt16>]
[-IPDstPortStartMatchCondition <UInt16>]
[-IPDstPortEndMatchCondition <UInt16>]
[-NetDirectPortMatchCondition <UInt16>]
[-URIMatchCondition <String>]
[-URIRecursiveMatchCondition <Boolean>]
[-PriorityValue8021Action <SByte>]
[-DSCPAction <SByte>]
[-MinBandwidthWeightAction <Byte>]
[-ThrottleRateActionBitsPerSecond <UInt64>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-NetQosPolicy cmdlet modifies an existing Quality of Service (QoS) policy. Match conditions or actions or general parameters of the policy such as NetworkProfile or Precedence can be changed.
Users cannot change the location of where an existing QoS policy is stored. Changing the PolicyStore parameter value will fail.
If a policy was created to be in ActiveStore and a user attempts to make it persistent, such as storing the policy on the local computer, the user has to create a new policy and place it on the local computer (localhost).
If the PolicyStore parameter is not specified, then the cmdlet will search for and update the policy on the local computer (localhost).
Examples
Example 1: Update a QoS policy to apply to outgoing traffic from a domain-joined adapter
PS C:\> Set-NetQosPolicy -Name "SMB Policy" -NetworkProfile DomainThis command updates the QoS policy named SMB Policy so that it only applies to traffic that is outgoing from a domain-joined network adapter.
Example 2: Update the precedence of a policy
PS C:\> Get-NetQosPolicy -Name "wildcard" | Set-NetQosPolicy -Precedence 250This command gets the QoS policy named wildcard and updates the precedence of the policy to 250.
Example 3: Add additional matching conditions
PS C:\> Set-NetQosPolicy -Name "Backup" -IPDstPortStart 3501 -IPDstPortEnd 3510This command updates the QoS policy named Backup with additional matching conditions.
Example 4: Update a QoS policy
PS C:\> Set-NetQosPolicy -Name "IIS" -Recursive $True -ThrottleRateActionBitsPerSecond 3000KBThis command updates the QoS policy named IIS, so that it applies to the return traffic for both the specified URI and subdirectories and files under the URI. This cmdlet also sets a new throttling rate at 3,000,000 bytes per second. An alias for the ThrottleRateActionBitsPerSecond parameter is ThrottleRateAction. Another alias is MaxBw.
Parameters
-AppPathNameMatchCondition
Specifies the name by which an application is run in Windows Server® 2012, such as application.exe or %ProgramFiles%\application.exe.
| Type: | String |
| Aliases: | AppPathName, ApplicationName, app |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DSCPAction
Specifies the differentiated services code point (DSCP) value. A valid DSCP value is in the range between 0 and 63. In addition, users can enter -1 to remove the DSCP setting from the policy.
| Type: | SByte |
| Aliases: | DSCPValue, DSCP |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InputObject
Specifies the input object that is used in a pipeline command.
| Type: | CimInstance[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPDstPortEndMatchCondition
Specifies the last port in a range of destination ports to be used to match the network traffic. This parameter must be used in conjunction with the IPDstPortStartMatchCondition parameter. The value of this parameter also must be larger than the value of the IPDstPortStartMatchCondition parameter.
| Type: | UInt16 |
| Aliases: | IPDstPortEnd |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPDstPortMatchCondition
Specifies the exact destination port to be used to match the network traffic. The filter of a QoS policy can be based on either a single port or a range of ports. To specify a single destination port, use this parameter. To specify a range of destination ports, use both the IPDstPortStartMatchCondition and the IPDstPortEndMatchCondition parameters.
| Type: | UInt16 |
| Aliases: | IPDstPort, DestinationPort, dp, dstport, destport |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPDstPortStartMatchCondition
Specifies the first port in a range of destination ports to be used to match the network traffic. This parameter must be used in conjunction with the IPDstPortEndMatchCondition parameter. The value of this parameter also must be smaller than the value of the IPDstPortEndMatchCondition parameter.
| Type: | UInt16 |
| Aliases: | IPDstPortStart |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPDstPrefixMatchCondition
Specifies the destination IP address, optionally with a network prefix, such as 1.2.3.4, 3ffe:ffff::1, 192.168.1.0/24, or fe80::1234/48.
| Type: | String |
| Aliases: | IPDstPrefix, DestinationAddress, da, dst, dstaddr, dstip, dest, destaddr, destip |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPPortMatchCondition
Specifies the port to be used to match the network traffic, it can be either source port or destination port. If either the source port or the destination port in a packet matches the value of this parameter, then the QoS policy will apply to the packet. Usually this is a well-known port that a client uses to communicate with a server. With this parameter specified, the same QoS policy can be configured on both the clients and the servers and apply to the traffic in both directions. For example, specifying this parameter value to 80 matches HTTP traffic sent by both HTTP clients and HTTP servers.
| Type: | UInt16 |
| Aliases: | IPPort, port |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPProtocolMatchCondition
Specifies the IP protocol to be used to match the network traffic. The acceptable values for this parameter are: TCP, UDP, and Both. If this parameter is unspecified, then Both is the default value. The QoS policy will apply to both TCP and UDP traffic.
| Type: | Protocol |
| Aliases: | IPProtocol, Protocol |
| Accepted values: | None, TCP, UDP, Both |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPSrcPortEndMatchCondition
Specifies the last port in a range of source ports to be used to match the network traffic. This parameter must be used in conjunction with the IPSrcPortStartMatchCondition parameter. The value of this parameter also must be larger than the value of the IPSrcPortStartMatchCondition parameter.
| Type: | UInt16 |
| Aliases: | IPSrcPortEnd |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPSrcPortMatchCondition
Specifies the exact source port to be used to match the network traffic. The filter of a QoS policy can be based on either a single port or a range of ports. To specify a single source port, use this parameter. To specify a range of source ports, use both the IPSrcPortStartMatchCondition and the IPSrcPortEndMatchCondition parameters.
| Type: | UInt16 |
| Aliases: | IPSrcPort, SourcePort, sp, srcport |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IPSrcPortStartMatchCondition
Specifies the first port in a range of source ports to be used to match the network traffic. This parameter must be used in conjunction with the IPSrcPortEndMatchCondition parameter. The value of this parameter also must be smaller than the value of the IPSrcPortEndMatchCondition parameter.
| Type: | UInt16 |
| Aliases: | IPSrcPortStart |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPSrcPrefixMatchCondition
Specifies the source IP address, optionally with a network prefix, such as 1.2.3.4, 3ffe:ffff::1, 192.168.1.0/24, or fe80::1234/48.
| Type: | String |
| Aliases: | IPSrcPrefix, SourceAddress, sa, src, srcaddr, srcip |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-MinBandwidthWeightAction
Specifies a numerical value for minimum bandwidth that a flow should get relatively. The actual bandwidth a flow gets will depend on the weights assigned to other flows in the computer. The acceptable values for this parameter are: 1 through 100.
| Type: | Byte |
| Aliases: | MinBandwidthWeight, minbww, weight |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Name
Specifies the QoS policy name.
| Type: | String[] |
| Position: | 0 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NetDirectPortMatchCondition
Specifies the network direct port to be used to match the network traffic. Network Direct uses an independent port space from the TCP or UDP port space. Windows Server 2012 will send a Network Direct policy to a network adapter only if the network adapter supports Network Direct.
| Type: | UInt16 |
| Aliases: | NetDirectPort, ndport, networkdirectport |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NetworkProfile
Specifies the profile, or connection type, of a network. The acceptable values for this parameter are: Domain, Public, Private, or All. If this parameter is not specified, then the QoS policy will be effective when a computer is connected on any type of connection.
| Type: | NetworkProfile |
| Accepted values: | Domain, Public, Private, All |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PolicyStore
Specifies the location of the policy that is stored. The acceptable values for this parameter are:
- ActiveStore
- COMPUTERNAME
- GPO:COMPUTERNAME
- GPO:DOMAIN\GPONAME
- LDAP://LDAP-URL
| Type: | String |
| Aliases: | store |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Precedence
Specifies the priority of a QoS policy. A higher priority policy will override a lower priority policy in case the priorities are conflicting. The acceptable values for this parameter are: 0 through 255. 255 specifies the highest priority and 0 specifies the lowest. If not specified, then the default value is 127.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PriorityValue8021Action
Specifies the IEEE 802.1p value. A valid 802.1p value is in the range between 0 and 7. In addition, users can enter -1 to remove the 802.1p priority setting from the policy.
| Type: | SByte |
| Aliases: | PriorityValue, PriorityValue8021, pri, dot1p |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-TemplateMatchCondition
Specifies a number of filters built in Windows Server® 2012. The acceptable values for this parameter are: FCoE, iSCSI, LiveMigration, NFS, SMB, or Cluster. For more information, see the New-NetQosPolicy cmdlet.
| Type: | Template |
| Aliases: | Template |
| Accepted values: | None, Default, iSCSI, FCoE, SMB, NFS, LiveMigration, Cluster |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleRateActionBitsPerSecond
Specifies a throttle rate in bits per second to set the maximum bandwidth that can be consumed.
| Type: | UInt64 |
| Aliases: | ThrottleRateAction, ThrottleRate, Throttle, maxbw |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-URIMatchCondition
Specifies the URI to match.
Only a HTTP URL is currently supported, such as http://myhost, https://*/training, http://myhost:8080/training, or https://myhost:*/training.
The QoS policy will only apply to the traffic sent from HTTP server applications to HTTP clients in response to the requests from the client for the specified URI.
| Type: | String |
| Aliases: | URI, url |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-URIRecursiveMatchCondition
Specifies that all subdirectories and files following the URI specified in the URIMatchCondition parameter are to be included. This parameter can be specified only if the URIMatchCondition parameter is specified.
| Type: | Boolean |
| Aliases: | URIRecursive, urlrecursive, recursive |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-UserMatchCondition
Specifies the user or group name in Active Directory, such as contoso\davidchew.
This parameter is usually specified with other filtering parameter such as the AppPathNameMatchCondition parameter.
| Type: | String |
| Aliases: | User, sid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
String[]
Microsoft.PowerShell.Cmdletization.GeneratedTypes.NetQosPolicy.NetworkProfile
Microsoft.PowerShell.Cmdletization.GeneratedTypes.NetQosPolicy.Template
Microsoft.PowerShell.Cmdletization.GeneratedTypes.NetQosPolicy.Protocol
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
The MSFT_NetQosPolicySettingData object contains a QoS policy.
Only if the PassThru parameter is specified does this cmdlet return the MSFT_NetQosPolicySettingData object.