Editar

Compartilhar via


New-NetIPAddress

Creates and configures an IP address.

Syntax

New-NetIPAddress
   [-IPAddress] <String>
   -InterfaceAlias <String>
   [-DefaultGateway <String>]
   [-AddressFamily <AddressFamily>]
   [-Type <Type>]
   [-PrefixLength <Byte>]
   [-ValidLifetime <TimeSpan>]
   [-PreferredLifetime <TimeSpan>]
   [-SkipAsSource <Boolean>]
   [-PolicyStore <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-NetIPAddress
   [-IPAddress] <String>
   [-DefaultGateway <String>]
   [-AddressFamily <AddressFamily>]
   [-Type <Type>]
   [-PrefixLength <Byte>]
   [-ValidLifetime <TimeSpan>]
   [-PreferredLifetime <TimeSpan>]
   [-SkipAsSource <Boolean>]
   [-PolicyStore <String>]
   -InterfaceIndex <UInt32>
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The New-NetIPAddress cmdlet creates and configures an IP address. To create a specific IP address object, specify either an IPv4 address or an IPv6 address, and an interface index or interface alias. We recommend that you define the prefix length, also known as a subnet mask, and a default gateway.

If you run this cmdlet to add an IP address to an interface on which DHCP is already enabled, then DHCP is automatically disabled. If Duplicate Address Detection (DAD) is enabled on the interface, the new IP address is not usable until DAD successfully finishes, which confirms the uniqueness of the IP address on the link.

Examples

Example 1: Add an IPv4 address

PS C:\>New-NetIPAddress -InterfaceIndex 12 -IPAddress 192.168.0.1 -PrefixLength 24 -DefaultGateway 192.168.0.5
PS C:\>Remove-NetIPAddress -IPAddress 192.168.0.1 -DefaultGateway 192.168.0.5

The first command adds a new IPv4 address to the network interface at index 12. The PrefixLength parameter specifies the subnet mask for the IP address. In this example, the PrefixLength of 24 equals a subnet mask of 255.255.255.0. When you add an IPv4 address, the address specified for the Default Gateway must be in the same subnet as the IPv4 address that you add. The second command removes the IPv4 address. To remove the IPv4 address, use the Remove-NetIPAddress cmdlet.

Parameters

-AddressFamily

Specifies an IP address family. The cmdlet creates an IP address for the family. If you do not specify this parameter, the property is automatically generated. The acceptable values for this parameter are:

  • IPv4
  • IPv6
Type:AddressFamily
Accepted values:IPv4, IPv6
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DefaultGateway

Specifies the IPv4 address or IPv6 address of the default gateway for the host. Default gateways provide a default route for TCP/IP hosts to use when communicating with other hosts on remote networks.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InterfaceAlias

Specifies an alias of a network interface. The cmdlet creates an IP address for the alias.

Type:String
Aliases:ifAlias
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-InterfaceIndex

Specifies an index of a network interface. The cmdlet creates an IP address for the index.

Type:UInt32
Aliases:ifIndex
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-IPAddress

Specifies the IPv4 or IPv6 address to create.

Type:String
Aliases:LocalAddress
Position:0
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-PolicyStore

Specifies a PolicyStore value. The acceptable values for this parameter are:

-- ActiveStore. The IP address information is valid. -- PersistentStore. The computer saves IP address information across restarts. When the computer restarts, it copies the saved settings to the ActiveStore.

The default value is ActiveStore. Specify ActiveStore only.

If you do not specify this parameter, the default entries are created in both the ActiveStore and the PersistentStore.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PreferredLifetime

Specifies a preferred lifetime, as a TimeSpan object, for an IP address. To obtain a TimeSpan object, use the New-TimeSpan cmdlet.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PrefixLength

Specifies a prefix length. This parameter defines the local subnet size, and is also known as a subnet mask.

Type:Byte
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SkipAsSource

Indicates whether an address is a primary IP address. This parameter identifies the primary IP address for outgoing traffic in a multiple IP address scenario. If this parameter is set to True, the addresses are not used for outgoing traffic and are not registered in DNS.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Type

Specifies an IP address type. The acceptable values for this parameter are:

-- Unicast -- Anycast

The default value is Unicast.

Type:Type
Accepted values:Unicast, Anycast
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ValidLifetime

Specifies a valid lifetime value, as a TimeSpan object, for an IP address. To obtain a TimeSpan object, use the New-TimeSpan cmdlet.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.