Editar

Compartilhar via


New-NetRoute

Creates a route in the IP routing table.

Syntax

New-NetRoute
   [-DestinationPrefix] <String>
   -InterfaceAlias <String>
   [-AddressFamily <AddressFamily>]
   [-NextHop <String>]
   [-PolicyStore <String>]
   [-Publish <Publish>]
   [-RouteMetric <UInt16>]
   [-Protocol <Protocol>]
   [-ValidLifetime <TimeSpan>]
   [-PreferredLifetime <TimeSpan>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
New-NetRoute
   [-DestinationPrefix] <String>
   [-AddressFamily <AddressFamily>]
   [-NextHop <String>]
   [-PolicyStore <String>]
   [-Publish <Publish>]
   [-RouteMetric <UInt16>]
   [-Protocol <Protocol>]
   [-ValidLifetime <TimeSpan>]
   [-PreferredLifetime <TimeSpan>]
   -InterfaceIndex <UInt32>
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The New-NetRoute cmdlet creates an IP route in the IP routing table. Specify the destination prefix, and specify an interface by using the interface alias or the interface index.

IP routing is the process of forwarding a packet based on the destination IP address. Routing occurs at TCP/IP hosts and at IP routers. The sending host or router determines where to forward the packet. To determine where to forward a packet, the host or router consults a routing table that is stored in memory. When TCP/IP starts, it creates entries in the routing table. You can add entries either manually or automatically.

For more information about routing, see Chapter 5 - IP Routing in the TechNet library.

Examples

Example 1: Add an IP route to the routing table

PS C:\>New-NetRoute -DestinationPrefix "10.0.0.0/24" -InterfaceIndex 12 -NextHop 192.168.0.1
PS C:\>Get-NetRoute | Format-List -Property *

This example adds a routing table entry, and then displays the properties of all the entries in the routing table.

The first command creates a route for the destination prefix 10.0.0.0/24 for the interface that has the index of 12. The command specifies 192.168.0.1 as the next hop.

The second command uses the Get-NetRoute cmdlet to get all the routes for the computer, and then passes them to the Format-List cmdlet by using the pipeline operator. The Format-List cmdlet can display all the properties of an object. For more information, type Get-Help Format-List.

Parameters

-AddressFamily

Specifies the IP address family. The cmdlet uses the family that you specify for the IP route. The acceptable values for this parameter are:

  • IPv4
  • IPv6

If you do not specify this parameter, the cmdlet selects a value based on the other input that you provide.

Type:AddressFamily
Accepted values:IPv4, IPv6
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DestinationPrefix

Specifies a destination prefix of an IP route. A destination prefix consists of an IP address prefix and a prefix length, separated by a slash (/). A value of 0.0.0.0/0 for IPv4 or ::/0 for IPv6 indicates that the value of the NextHop parameter is a default gateway. The prefix length of the local host must match the prefix specified in this parameter, with all remaining address fields set to zero.

Type:String
Position:0
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-InterfaceAlias

Specifies the alias of a network interface. The cmdlet adds a route for the interface that has the alias that you specify.

Type:String
Aliases:ifAlias
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-InterfaceIndex

Specifies the index of a network interface. The cmdlet adds a route for the interface located at the index that you specify.

Type:UInt32
Aliases:ifIndex
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-NextHop

Specifies the next hop for the IP route. The cmdlet assigns the next hop that you specify to the IP route. A value of 0.0.0.0 for IPv4 or :: for IPv6 indicates that the route is on the local subnet.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PolicyStore

Specifies the PolicyStore value. The cmdlet assigns the PolicyStore value that you specify to the IP route. The acceptable values for this parameter are:

  • ActiveStore. Current routing information, used by the OS. When a computer reboots, information in this store is lost.
  • PersistentStore. Cannot be used. Routing information in this store preserved across reboots. When a computer starts, it copies the saved settings from this store to the ActiveStore.

By default, a route is saved in both stores. Use this parameter only when you need to create a route in just the ActiveStore.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PreferredLifetime

Specifies a preferred lifetime, as a TimeSpan object, of an IP route. The cmdlet assigns the lifetime that you specify to the IP route. To obtain a TimeSpan object, use the New-TimeSpan cmdlet. For more information, type Get-Help New-TimeSpan. The default value for a lifetime is infinite.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Protocol

Specifies the type of routing protocol. The cmdlet assigns the protocol that you specify to the IP route. The acceptable values for this parameter are:

  • Bbn
  • Bgp
  • Dhcp
  • Dvmrp
  • Egp
  • Eigrp
  • EsIs
  • Ggp
  • Hello
  • Icmp
  • Idpr
  • Igrp
  • IsIs
  • Local
  • NetMgmt
  • Ospf
  • Rip
  • Rpl
  • Other

The default value is NetMgmt.

Type:Protocol
Accepted values:Other, Local, NetMgmt, Icmp, Egp, Ggp, Hello, Rip, IsIs, EsIs, Igrp, Bbn, Ospf, Bgp, Idpr, Eigrp, Dvmrp, Rpl, Dhcp
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Publish

Specifies the publish setting of an IP route. The cmdlet assigns the publish setting that you specify to the IP route. The acceptable values for this parameter are:

  • No. Do not publish or advertise IP route information in router advertisements.
  • Yes. Publish and advertise IP route information with an infinite valid lifetime in router advertisements.
  • Age. Publish and advertise IP route information with a finite valid lifetime in router advertisements. Specify a valid lifetime by using the ValidLifetime parameter.

The default value is No.

Type:Publish
Accepted values:No, Age, Yes
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RouteMetric

Specifies an integer route metric for an IP route. The cmdlet assigns the metric that you specify to the IP route. The default value is 256. To choose among multiple routes, the computer adds this value. The computer selects the route with the lowest combined value. To modify the interface metric, use the Set-NetIPInterface cmdlet.

Type:UInt16
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ValidLifetime

Specifies a valid lifetime, as a TimeSpan object, for an IP route. The cmdlet assigns the lifetime setting that you specify to the IP route. To obtain a TimeSpan object, use the New-TimeSpan cmdlet. The default value is infinite.

Type:TimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.