Set-SmbClientConfiguration
Sets the SMB client configuration.
Syntax
Set-SmbClientConfiguration
[-CompressibilitySamplingSize <UInt64>]
[-CompressibleThreshold <UInt64>]
[-ConnectionCountPerRssNetworkInterface <UInt32>]
[-DirectoryCacheEntriesMax <UInt32>]
[-DirectoryCacheEntrySizeMax <UInt32>]
[-DirectoryCacheLifetime <UInt32>]
[-DisableCompression <Boolean>]
[-DormantFileLimit <UInt32>]
[-EnableBandwidthThrottling <Boolean>]
[-EnableByteRangeLockingOnReadOnlyFiles <Boolean>]
[-EnableCompressibilitySampling <Boolean>]
[-EnableInsecureGuestLogons <Boolean>]
[-EnableLargeMtu <Boolean>]
[-EnableLoadBalanceScaleOut <Boolean>]
[-EnableMultiChannel <Boolean>]
[-EnableSecuritySignature <Boolean>]
[-EncryptionCiphers <String>]
[-ExtendedSessionTimeout <UInt32>]
[-FileInfoCacheEntriesMax <UInt32>]
[-FileInfoCacheLifetime <UInt32>]
[-FileNotFoundCacheEntriesMax <UInt32>]
[-FileNotFoundCacheLifetime <UInt32>]
[-ForceSMBEncryptionOverQuic <Boolean>]
[-KeepConn <UInt32>]
[-MaxCmds <UInt32>]
[-MaximumConnectionCountPerServer <UInt32>]
[-OplocksDisabled <Boolean>]
[-RequestCompression <Boolean>]
[-RequireSecuritySignature <Boolean>]
[-SessionTimeout <UInt32>]
[-SkipCertificateCheck <Boolean>]
[-UseOpportunisticLocking <Boolean>]
[-WindowSizeThreshold <UInt32>]
[-Force]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-SmbClientConfiguration cmdlet sets the Server Message Block (SMB) client configuration.
Note
The EncryptionCiphers parameter is available beginning with 2022-06 Cumulative Update for Microsoft server operating system version 21H2 for x64-based Systems (KB5014665), and Cumulative Update for Windows 11, version 22H2 (KB5014668).
The CompressibilitySamplingSize, CompressibleThreshold, EnableCompressibilitySampling, and RequestCompression parameters are available beginning with 2022-08 Cumulative Update for Microsoft server operating system version 21H2 for x64-based Systems (KB5016693), and Cumulative Update for Windows 11, version 22H2 (KB5016691).
Examples
Example 1: Set the SMB client configuration
Set-SmbClientConfiguration -ConnectionCountPerRssNetworkInterface 8 -Confirm:$falseThis command sets the SMB client configuration without user confirmation.
Example 2: Specify encryption ciphers
Set-SmbClientConfiguration -EncryptionCiphers "AES_128_GCM, AES_256_GCM" -Confirm:$falseThis command specifies the encryption ciphers used by the SMB client, and the preferred order without user confirmation.
Parameters
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CompressibilitySamplingSize
Specifies the size in bytes to sample in a file to look for compressible data. Although the
parameter type is UInt64, the sampling size can be specified up to a maximum of
9,007,199,254,740,992 (9 PiB).
| Type: | UInt64 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CompressibleThreshold
Specifies the threshold in bytes in which to attempt to find compressible data. Although the
parameter type is UInt64, the threshold can be specified up to a maximum of
9,007,199,254,740,992 (9 PiB).
| Type: | UInt64 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConnectionCountPerRssNetworkInterface
Specifies the SMB connection count per each RSS network interface.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DirectoryCacheEntriesMax
Specifies the maximum cache entries that can be in the directory cache.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DirectoryCacheEntrySizeMax
Specifies the maximum size of directory cache entry.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DirectoryCacheLifetime
Specifies the directory cache lifetime.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableCompression
Specifies that the SMB client ignores all requests for compression from applications or SMB servers.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DormantFileLimit
Specifies the dormant file limit.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableBandwidthThrottling
Indicates that bandwidth throttling is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableByteRangeLockingOnReadOnlyFiles
Indicates that byte range locking on read-only files is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableCompressibilitySampling
Controls the sampling behavior. SMB by default always attempts to compress the entire file when a
client or server requests it. With EnableCompressibilitySampling set to $true, SMB uses the
compression sampling algorithm where it attempts to compress the file based on the values
configured in the CompressibiltySamplingSize and CompressibleThreshold parameters.
When you specify EnableCompressibilitySampling as $true and don't specify either the
CompressibiltySamplingSize or CompressibleThreshold parameters, the algorithm attempts to
compress the first 524,288,000 bytes (500 MiB) of a file during transfer. The algorithm tries to
track that at least 104,857,600 bytes (100 MiB) compresses within that 500 MiB range. If fewer
than 100 MiB was compressible, SMB compression stops trying to compress the rest of the file. If at
least 100 MiB compressed, SMB compression attempts to compress the rest of the file.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableInsecureGuestLogons
Indicates whether SMB client will allow insecure guest logons to an SMB server.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableLargeMtu
Indicates that large MTU is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableLoadBalanceScaleOut
Indicates whether load balance scale out is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableMultiChannel
Indicates that multi-channel is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableSecuritySignature
Indicates that the security signature is enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EncryptionCiphers
Specifies the encryption ciphers used by the SMB client and the preferred order.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ExtendedSessionTimeout
Specifies the extended session time-out.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileInfoCacheEntriesMax
Specifies the maximum number entries that can be in the file information cache.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileInfoCacheLifetime
Specifies the file information cache lifetime.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileNotFoundCacheEntriesMax
Specifies the maximum number entries that can be in the file not found cache.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileNotFoundCacheLifetime
Specifies the file not found cache lifetime.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Force
Forces the command to run without asking for user confirmation.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceSMBEncryptionOverQuic
Specifies that the SMB client uses SMB encryption inside of the SMB over QUIC TLS 1.3 encrypted tunnel even if the SMB server doesn't require it.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-KeepConn
Specifies the time, in seconds, before the SMB client session is automatically disconnected.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaxCmds
Specifies the maximum number of concurrent outstanding network requests that the SMB client supports.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaximumConnectionCountPerServer
Specifies the maximum connection count per server.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OplocksDisabled
Indicates that opportunistic locks are disabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RequestCompression
Indicates if an SMB client should always request compression even if the server or application didn't specify it.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RequireSecuritySignature
Indicates that the security signature is required.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SessionTimeout
Specifies the session time-out.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SkipCertificateCheck
Specifies that the SMB client not trust the SMB over QUIC SMB server certificate issuer. Required when using a self-signed certificate.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If
this parameter is omitted or a value of 0 is entered, then Windows PowerShell calculates an
optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the
computer. The throttle limit applies only to the current cmdlet, not to the session or to the
computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseOpportunisticLocking
Indicates that opportunistic locks are used.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet isn't run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WindowSizeThreshold
Specifies the window size threshold.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
None
Outputs
None