Compartilhar via

Configuring HTTP Access to SQL Server 2005 Analysis Services on Microsoft Windows XP

  • Artigo

By Edward Melomed

Summary: This paper is intended for anyone who is interested in providing access to SQL Server Analysis Services through HTTP protocol. The paper explains all the steps required to set up HTTP access and discusses different performance and security settings. Instructions in this paper can be used to set up HTTP connection to Analysis Server on Windows XP and and Microsoft Windows 2000 operating systems.

On This Page

Overview
Getting binaries
Creating a virtual directory
Setting up virtual directory properties
Selecting security settings
Securing user access to the directory serving as a base for the virtual directory
Selecting the target Analysis Services server
Getting it all together

Overview

Microsoft® SQL Server™ 2005 Analysis Services uses the same architecture for providing HTTP access as did SQL Server 2000 Analysis Services.

The Pump component is loaded into IIS (Internet Information Services) and serves as an ISAPI extension, pumping data from the client to an Analysis Services server and back.

This white paper walks you through the process of setting up HTTP access to Analysis Services.

Figure 1 provides a high-level overview of the component architecture.

Cc917712.httpssas01(en-us,TechNet.10).gif

Figure 1

Getting binaries

To get binaries:

Copy the contents of the %Installation folder%\OLAP\bin\isapi directory into the folder you would like to become the base for the virtual directory in IIS.

In this example, we are going to copy all the files from the C:\Program Files\Microsoft SQL Server\MSSQL.1\OLAP\bin\isapi folder into the C:\inetpub\wwwroot\olap directory.

Notes: To take advantage of the full set of security settings, it is important to make sure that the folder to become the base for the virtual directory is located on the drive formatted for the NTFS file system.

Due to IIS limitations, the path to your directory should not contain spaces.

If you are planning to run the HTTP pump on a different server than the Analysis Services server, please make sure that you also install %CD Root%\Redist\Analysis Services\pts9.msi.

Creating a virtual directory

To create a virtual directory:

  1. To open the Computer Management console, open Control Panel, then Administrative Tools, then Computer Management.

    (Or, you can right-click the My Computer icon and select Manage on the shortcut menu.)

  2. In the Computer Management console, expand the Services and Applications node and then the Internet Information Services node.

    If you can’t find the Internet Information Services node, IIS is probably not installed on your machine. To install it, open Add or Remove Programs in Control Panel. Select Add/Remove Windows Components. Then add ISS to Windows.

  3. Right-click the Web site to open the shortcut menu and select New, then Virtual directory.

  4. Name the virtual directory. In this example, we call it OLAP.

    The Content Directory should point to the folder you’ve just created. In our example, this is C:\inetpub\wwroot\olap.

  5. Make sure that under the Access Permissions, only the second check box, Run Scripts (Such as ASP) is selected. (See Figure 2.)

    Cc917712.httpssas02(en-us,TechNet.10).gif

    Figure 2

Setting up virtual directory properties

To set properties for the virtual directory:

  1. Right-click your virtual directory node and select Properties from the menu.

    You should see the screen shown in Figure 3.

    Cc917712.httpssas03(en-us,TechNet.10).gif

    Figure 3

    Properties that need to be changed are circled in red.

    Properties that are not required to be changed but which play an important role in the security and performance of the virtual directory are circled in green.

  2. Select the Configuration button and you will see the screen shown in Figure 4.

    Cc917712.httpssas04(en-us,TechNet.10).gif

    Figure 4

  3. Click the Add button.

  4. In the Executable option, enter the full path name to msmdpump.dll. In this example, it would be: C:\wwroot\olap\msmdpump.dll

  5. Enter .dll in the Extension text box.

    Your screen should look something like the dialog box shown in Figure 5.

    Cc917712.httpssas05(en-us,TechNet.10).gif

    Figure 5

  6. Click the OK button to accept the settings.

Selecting security settings

To select security settings;

  1. Select the Directory security tab. You will see a dialog box similar to the one in Figure 6.

    Cc917712.httpssas06(en-us,TechNet.10).gif

    Figure 6

  2. You are presented with three options. Choose one of them.

    This section briefly describes these options, citing the advantages, disadvantages, and security concerns of each one.

Anonymous access

When this mode is selected, Pump (msmdpump.dll) is running with credentials; in our case, the credentials of IUSR_MACHINENAME user. Therefore, every connection to Analysis Services is opened as IUSR_MACHINENAME user. When this mode is selected, there is no distinction between users who are connecting to IIS and those who are connecting to Analysis Services. There is no way to distinguish between users.

This mode is to be used when the security infrastructure does not take advantage of the security functionality of Analysis Services. This is most likely an extremely controlled environment, where users are given or denied access to the virtual directory.

Basic authentication

This mode requires that the user enter a user name and password. The user name and password are transmitted over the HTTP connection to IIS. IIS will try to impersonate the user using the provided credentials.

Please note that it is absolutely imperative for anyone building a system where the password is transmitted to have ways of securing the communication channel. IIS provides a great set of tools for setting up and requiring that all communications be encrypted using HTTPS protocol.

The steps required for setting up HTTPS for a virtual directory are described later in this paper.

Integrated Windows authentication

This is the most secure and the recommended mode.

It requires that IIS Server be able to access user domain credentials. This could be done using Microsoft Active Directory® or another mechanism. It is beyond the scope of this paper to discuss in depth all the possible configurations.

Securing user access to the directory serving as a base for the virtual directory

It is strongly recommended that you secure user access to the directory that is used as a base for the virtual directory you’ve created and set up.

It is recommended that you give “Read and Execute” rights to your file system folder to machine users, and full access to members of the Administrators local group.

Selecting the target Analysis Services server

As you can see from the architectural diagram in Figure 1, every pump component uses its own configuration file.

Let’s open the msmdpump.ini file located in your folder and take a look at the contents of this file. It should have following in it:

<ConfigurationSettings>
<ServerName>localhost</ServerName>
<SessionTimeout>3600</SessionTimeout>
<ConnectionPoolSize>100</ConnectionPoolSize>
<MinThreadPoolSize>0</MinThreadPoolSize>
<MaxThreadPoolSize>0</MaxThreadPoolSize>
<MaxThreadsPerClient>4</MaxThreadsPerClient>
</ConfigurationSettings>

The only setting you are interested in at this point is <ServerName>.

If the Analysis Services instance that you need to provide access to is located on the local machine and installed as a default instance, there is no reason to change this setting. Otherwise, you need to specify the machine name and instance name ( mymachine\inst1).

It is also possible to specify a pointer to the virtual directory on another IIS server that is set up for HTTP access to Analysis Services.

For example you can have <ServerName>http://secondmachine/olap/msmdpump.dll</ServerName>

Getting it all together

At this point you should have configured your HTTP Pump and should be ready to try to connect from your application.

If your application provides you with a way to specify the server name, all you need to do is to substitute your server name with the path to your virtual directory concatenated with “msmdpump.dll”.

As in SQL Server 2000 Analysis Services, the MSOLAP OLEDB provider will understand that the server name includes an URL path and will automatically start using a HTTP protocol.

For example, if you are to connect to “MyMachine” from the MDX sample application, you should be able to connect to Analysis Services using “http://MyMachine/olap/msmdpump.dll” as a server name.